Professional Documents
Culture Documents
PPI
Ripper tilt cylinder, LH and RH case pivot bearings
- 0
Ripper lift cylinder, LH and RH case pivot bearings
202 001
Ripper frame LH and RH case pivot bearings
2
11: /12/2 4A6 7
Ripper lift cylinder LH and RH ripper frame pivot bearings
UE :20- 2 2 1
Ripper frame LH and RH ripper carriage pivot bearings
N 0
Equalizer bar, LH and RH end pin bearings
©2 R 415 :003
The automatic lubrication system consists of the following systems:
0
Electrically driven pump with grease reservoir
Cat 2 C 2 9
Electrical system consisting of power/control harness
e r
Con pilla terpi a
Control unit (integrated in the pump housing)
fide r: llar
Pump control integration to Information Display
ntia Inc
The electrical drive pump is used to pressurize the lubrication system. The control unit turns the system ON and OFF at periodic intervals.
l .
The grease lines and injectors deliver a predetermined amount of grease to the grease points that is based on an adjustment sleeve at the injector.
Gre
The pump timing can be adjusted to 15, 30, 45, 60, 90, 120, 150, or 180 minutes.
Illustration 1 g03803497
(1) Lift cylinder yoke LH and RH
(2) Equalizer bar
(3) Ripper tilt cylinder LH and RH case pivot bearings
(4) Ripper lift cylinder LH and RH case pivot bearings
(5) Ripper frame LH and RH case pivot bearings
(6) Ripper lift cylinder LH and RH ripper frame pivot bearings
(7) Ripper tilt cylinder LH and RH ripper carriage pivot bearings
(8) Ripper frame LH and RH ripper carriage pivot bearings
Recommended Lubrication for the Automated Lubrication System(1)
Grease NLGI °C °F
Caterpillar Auto-Lube 1 -18 +29 0 +85
Caterpillar Auto-Lube 2 -1 +41 +30 +105
Caterpillar Auto-Lube 0 -29 +10 -20 +50
Caterpillar Arctic Platinum 000 -59 +4 -75 +40
Caterpillar Desert Gold 2 +4 +66 +40 +150
Table 1
(1)
In order to use a non-Caterpillar lubricant, the supplier must certify that the lubricant is compatible with Caterpillar grease. Otherwise, flush each pin joint fully with the new
lubricant in order to remove the Caterpillar lubricant entirely. Failure to meet this requirement may lead to failure of a pin joint due to premature breakdown of the lubricant.
PPI-000174A6
2022/12/21
11:22:10-03:00
i06095331
© 2022 Caterpillar Inc.
Caterpillar:
Confidential Green