Professional Documents
Culture Documents
FAB APPROVE[)
MODELS: rhis kit is applicable only to aircraft that are equipped with
an optional drag chute installation.
N ~-aa
BPPROVED:
Engineering Support
AIR3LANE ACCESSORY KfT NO. AAfC71-7
Centerline Of Frame
9
e
2 1~
OFrame 26 (Model
Frame 25 li’rf~cr
3 )Hook (Ref)
ALL ATRCflAFT
1J~5220-3 Screrv
(1 Reqd) ?Z )AN970-3
(2 RP4d)
~d´•CI, Y~
~T;iAS43DIf3-12 ~accr
II F.e~d) r 5)MS21062-08 Nzrt
~1 Rcqd)
~a ~m
-2-
AIRPLANE ACCESSORY KIT NO. AAK71,7
PARTS REQUIRED:
C NOTE
1 NAS220-9 Screw
1 2588062-2 Riser Keeper
1 MS21042-08 Nut
2 AN970-3 Washer
I NAS43DD3-12 Spacer
1 AAK71-7 Modification Instructions
b. Raise hook (3) on control mechanism and remove riser from hook.
d. Attach riser keeper (7), small loop end, to frame (9)-using screw (8),
washers (4), spacer (6) and nut (5) as shown in detail A.