Professional Documents
Culture Documents
L605 Rev. E 03/08 For Date Codes Beginning with the Letter "O"
16
Torque to 12 in-lbs. 1 13
(1 Nm.)
14
35
IMPORTANT NOTE
Indicates staked threads. 18
S Stake mark must be 3
removed prior to disassembly. Note: Base, Item #6, is not
Failure to do so may result in
22 available as a service item.
damage to parts. Order complete JHA 73.
6
Some cylinder stop rings are Torque to 6-7 ft-lbs.
assembled with Loctite on the 30 32 (8-10 Nm).
threads. Enerpac suggests Adjust relief to
staking threads when 9600-10000 psi
reassembling. 17 (662-690 bar).
5 5
Torque to 18-22 ft-lbs.
(24-30 Nm). 4 33
5
Internal thread of S 10 34
Sleeve, Item #8, must 9 8
be staked to
19
prevent Release 7 11
Valve, Item #7, from 5 12
being removed. S 23 17
20
15 24
26 25
28
Torque to 18-22 ft-lbs. Install flush below
(24-30 Nm). 21
29 surface of base.
27 S
Repair Parts List
Item Part Number Qty. Description Item Part Number Qty. Description
1 Std. Hdw. 4 #10-24 x .5 Button Hd. 18 ★ 1 G-T Ring Asm. (Incl. #5)
2 CB973101 1 Cover Plate 19 ★ 1 O-Ring
3 CR402025 1 Bladder 20 ★ 1 Back-Up
4 CA113006SR 1 Breather Filler Plug (Incl. #5) 21 CA207006 1 Plug
5 ★ 4 Gasket 22 ★ 1 O-Ring
6 N/A 1 Base (Order Complete) 23 ★ 1 O-Ring
7 CA237950SR 1 Release Valve Asm. 24 ★ 1 Back-Up
8 Y845446SR 1 Sleeve (Release Valve) 25 ★ 1 O-Ring
(Incl. #7,9,10,34) 26 ★ 1 Back-up
9 ★ 1 O-Ring 27 Y992061 1 Pin
10 ★ 1 O-Ring 28 See #15 1 Pump Piston
11 Y991061SR 1 Beam Pin (Incl. #12) 29 DA1367060 1 Beam
12 Y990028 1 Set Screw 30 Std. Hdw. 1 1/4 NPTF Flush Plug
13 CA206044 1 Stop Ring 31 CA14070 1 Handle (Not shown)
14 ★ 1 O-Ring 32 CR211900SR 1 Rel. Valve (Incl.#33)
15 Y844446SR 1 Sleeve (Piston) 33 ★ 1 Gasket
(Incl. #23,24,25,26,28) 34 See #8 1 Seat
16 CR699040 1 Plunger 35 Y835101 1 Name Plate
17 DA3041900SR 2 Seat Asm.
★ Items included in and available only as part of Repair Kit JHA73K.