Professional Documents
Culture Documents
TD : W-228
Revision : 01
WBL-1612-01 SL XLC N Effective Date : 25/11/2011
WATERBASED LACQUER WBL-1612-01 SL XLC N is a high quality paint based on special 100%
Acrylic Emulsion resin which is designed to provide good flow, easy in application, good adhesion on
substrate, no odour, environmental friendly, and Low VOC that approved by certification body in
Germany. This product is ideal for the protection and decoration of interior housing component,
handicraft, and rattan furniture.
PRODUCT SPECIFICATION
Type : Acrylic Emulsion Resin
Solid Content Viscosity
WBL-1612-01 SL XLC N Appearance Gloss level Specific Gravity
(NV, w/w) (Din cup 4, 30°C)
Clear Doff Milky liquid 10 - 20 % 28 ± 2 % 45 ± 5 sec 1.03 ± 0.02 g/cc
Clear Satin Milky liquid 20 - 30 % 28 ± 2 % 45 ± 5 sec 1.03 ± 0.02 g/cc
Semi Gloss Milky liquid 50 - 60 % 28 ± 2 % 45 ± 5 sec 1.03 ± 0.02 g/cc
Medium Gloss Milky liquid 70 - 80 % 28 ± 2 % 45 ± 5 sec 1.03 ± 0.02 g/cc
Clear Gloss Milky liquid 85 - 90 % 28 ± 2 % 45 ± 5 sec 1.03 ± 0.02 g/cc
Flash Point : NA
Packing : in 20 lt. steel pail or 200 lt. steel drum
APPLICATION
o
Application condition : 25 - 35 C, 60 - 80%RH
Application method : Brush or Air spray
Substrate : Wood, Rattan
Mixing ratio by volume : Ready for use
Thinner : Water if necessary, max 10%
Application viscosity : Ready for use by brush or 12 - 14 sec Din Cup 4 by spray
Pot life of mixture : N/A
2
Coating Amount (wet) : 60 - 80 g/m of mixture per coat
Theoretical coverage : 12 - 14 m /ltr at ca 80 g/m2
2
FILM PROPERTIES
Drying time
Dust Free : 10 - 15 minutes
Tack Free : 30 - 40 minutes
Recoating time : wet on dry = after 90 - 120 minutes
Adhesion on Rattan : GT = 0 – 1
Resistance to :
Blocking 2 Psi : Pass
Check (ASTM D 1211-06) : N/A
OTHERS
Shelf life : Two years if stored in cool and dry condition in original sealed cans
Storage and handling : Store in good ventilation room temperature
Page 1 of 2
pd/ws/D:\wanti\TECNICAL DATA\Technical data\Industri\WBL-1612-01 SL XLC N.doc/25.11.11
SURFACE PREPARATION
The surface must be clean, dry, and free from oil.
Remove oil, grease, or dirt with solvent or appropriate method (wire brush, steel wool, or sand paper
no. 240).
APPLICATION INFORMATION
Mix well the WATERBASED LACQUER WBL-1612-01 SL XLC N before use it.
Apply even coat of WATERBASED LACQUER WBL-1612-01 SL XLC N by spray at coating amount
2
60 - 80 g/m .
Sand the surface lightly with sand paper no. 400 after dry 90 - 120 minutes.
Apply another even coat of WATERBASED LACQUER WBL-1612-01 SL XLC N.
SAFETY PRECAUTION
This product is non toxic. It does not contain any material with mercury or heavy metals. Avoid contact with
the skin and eyes. Wear suitable protective clothing such as goggles, dust masks, and gloves. Use barrier
cream.
This product is non flammable.
FIRST AID:
Eye contact : Rinse immediately with plenty of water for at least 15 minutes; seek medical advice
Skin contact : Wash with soap and water. If irritation occurs, seek medical advice
Ingestion : Provide symptomatic treatment and seek medical advice
Inhalation : Remove person to fresh air. Keep patient rested and give artificial respiration
Page 2 of 2
pd/ws/D:\wanti\TECNICAL DATA\Technical data\Industri\WBL-1612-01 SL XLC N.doc/25.11.11