Professional Documents
Culture Documents
F
4
Liquid Level: F
5 F
6
Service: Item No.:
Specific Gravity:
Diameter: F
7
Length, Tangent-to-Tangent: F
7 Type: F 8
Vertical Horizontal Sphere
National Board F
10 Canadian F11 Special Service: F12 Overpressure Protection: F
13
Registration Required: Registration Required: Lethal (L) Direct Firing (DF) Valve Rupture Disk
Yes No Yes No Unfired Steam Boiler (UB) Other System Design
OPERATING CONDITIONS: F
14 Minimum Pressure Maximum Pressure Minimum Temperature Maximum Temperature
Case 1
Case 2
DESIGN CONDITIONS: F
15 Pressure Temperature
Internal Design Pressure:
External Design Pressure:
MAWP Internal: F
17 Same as Design Pressure Calculated by Manufacturer:
MAWP External: Same as Design Pressure Calculated by Manufacturer:
Minimum Design Metal Temperature F
18 Deg @ Due to: Process Other
(MDMT) – Case 1 Ambient Temperature
Minimum Design Metal Temperature Deg @ Due to: Process Other
(MDMT) – Case 2 Ambient Temperature
Corrosion Allowance: Shell Heads Nozzles Jacket Coil Supports Internals Corrosive
F
19 Service?
Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. Yes No
Description Number Size Flange Class Description Number Size Flange Class
Required Type Required Type
(07/17)
679
KK-1 Đính kèm - 5/ Attachment -5
F
TYPE OF JOINT F
33
JOINT LOCATION 32 NDE WITH COMMENTS
UW-3 (Use Types as Described in UW-12)
Category A
Category B Head-to-Shell
Other
Nozzle Flanges
Category D
SKETCH F
35
GENERAL NOTES F
36
CERTIFICATION F
37
We certify that the statements made in this form are accurate and represent all details of design as per the user or his designated agent
(see Nonmandatory Appendix NN)
Date:
F
38
User:
Signed:
(Representative)
Registration Identification:
(Optional)
Registration Seal (Optional)
(07/21)
680
Đính kèm - 5/ Attachment -5 KK-1
F
1 F
2 Country of Installation: State/Province of City of Installation: F
3
Owner: Operator:
F
3 Installation: F
3
F
4
Liquid Level: Chamber 1 Chamber 2 F
5 F
6
Service: Item No.:
Specific Gravity: Chamber 1 Chamber 2
Diameter: F
7
Shell Length, Tangent-to-Tangent: F
7 Type: Jacket Internal Coil
Shell and Tube F
9
National Board F
10 Canadian F11 Special Service: F12 Overpressure Protection: F
13
Registration Required: Registration Required: Lethal (L) Direct Firing (DF) Valve Rupture Disk
Yes No Yes No Unfired Steam Boiler (UB) Other System Design
OPERATING CONDITIONS: F
14 Minimum Pressure Maximum Pressure Minimum Temperature Maximum Temperature
Chamber 1 – Case 1
Chamber 2 – Case 1
Chamber 1 – Case 2
Chamber 2 – Case 2
DESIGN CONDITIONS: F
16 Chamber 1 Chamber 2
Internal Design Pressure: @ @
External Design Pressure: @ @
MAWP Internal: F17 Same as Design Calculated by Same as Design Calculated by
Pressure: Manufacturer: Pressure: Manufacturer:
MAWP External: Same as Design Calculated by Same as Design Calculated by
Pressure: Manufacturer: Pressure: Manufacturer:
Minimum Design Metal Temperature F
18 @ Due to: Process Other
(MDMT) – Case 1 Ambient Temperature
Minimum Design Metal Temperature @ Due to: Process Other
(MDMT) – Case 2 Ambient Temperature
Corrosion Allowance: F
19 Shell Heads Nozzles Jacket Coil Supports Tubesheet Tubes
Corrosive Service? Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. SS TS Int. Ext.
Yes No
Cyclic Service: Yes No F20 Cycles per Design Life years Fatigue Analysis? Yes No
Wind Loading: ASCE 7 F
21 Wind Speed Classification Exposure Topographic Elevation
UBC IBC Category Category Factor
Other None
Seismic Loading: ASCE 7 F
22 Soil Profile Classification: PWHT: Other Loadings per UG-22: F23
UBC IBC F
22 Per Code Temp. Gradients Deflagration
Other None Process Required Diff. Thermal Exp.
Insulated: Yes No F
24 Type: Thickness Density Coating Specification: F
25
Description Number Size Flange Class Description Number Size Flange Class
Required Type Required Type
(07/17)
681
KK-1 Đính kèm - 5/ Attachment -5
F
TYPE OF JOINT F
33
JOINT LOCATION 32 NDE WITH COMMENTS
UW-3 (Use Types as Described in UW-12)
Category A
Category B Head-to-Shell
Other
Nozzle Flanges
Tubesheets
Category D
SKETCH F
35
GENERAL NOTES F
36
CERTIFICATION F
37
We certify that the statements made in this form are accurate and represent all details of design as per the user or his designated agent
(see Nonmandatory Appendix NN)
Date:
F
38
User:
Signed:
(Representative)
Registration Identification:
(Optional)
Registration Seal (Optional)
(07/15)
682