You are on page 1of 3

PRINCIPLES OF DESIGN MINI BOOK


fold

front back

1. Photocopy the template on 1 2. Cut around the border on 3. Fold the paper in half
piece of 8.5” x 11” copy paper. the front page. Fold the paper lengthwise – long end to long
Make sure the front and back in half twice in both directions end.
look like this. to make 16 boxes. Open it up.

fold

4. Cut from the fold along 5. Open up the paper. Cut 6. Fold the 4 flaps back so
each crease, stopping at the along the top fold of the 2 they line up with the outside
horizontal fold. Make 3 cuts. inside rectangles to make 4 edges of the paper.
flaps. You should be looking
at the front of the paper.


7. Turn the paper over with the 8. Fold the outside short ends 9. Fold the paper in half short
flaps face down. You should of the paper into the centre. end to short end. Make sure
be looking at the back of the All the rectangles should be the flaps are facing out.
paper. blank.



10. Hold the outside edges of 11. Flatten the paper then fold 12. The outside covers of your
the paper and push towards it in half to create the 16 page book should be blank. The first
the centre until you see a box book. page of your book should be
formed. Keep pushing until all CONTRAST.
the pages line up.

Used with permission of CrayolaTeachers.ca


CREATE
1. Choose 3 principles.

2. Highlight them on
the chart.

3. On the following
2-page spread
create a design
that demonstrates
the 3 principles
you selected.

You might also like