Professional Documents
Culture Documents
cardiagn.com
again.
3. Diagnostic trouble code check (read by the check engine warning
DLC lamp)
EFI-T <CAUTION>
> Turn IG on before reading the diagnostic trouble code and make sure
that the check engine warning lamp is lit.
> Check mode can not be checked.
(1) Turn IG off.
(2) Use SST to short circuit between terminals 12 (EFI-T) and 4 (E) of
DLC.
E SST 09991-87403, 09991-87404
G101210J06
<CAUTION>
> Never confuse connection positions of the connector; otherwise, a
failure may occur.
> Use only a dedicated type of diagnosis check wire.