Professional Documents
Culture Documents
Page 1 of 3
Cerrar SIS
Pantalla anterior
Desarmado y Armado
3204 VEHICULAR ENGINES
Número de medio -SENR3230-00 Fecha de publicación -01/10/1985 Fecha de actualización -30/11/2001
START BY:
a. remove flywheel
NOTE: Whenever the crankshaft seal is removed from the wear sleeve, a new Wear Sleeve and
Seal Group must be installed as a set. If the seal is put back on the wear sleeve, the seal can be
damaged.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 01/09/2013
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGIN... Page 2 of 3
3. Install tool (B) between tool (C) and the wear sleeve. Turn tool (B) until the edge of the tool
makes a flat place (crease) in the wear sleeve. Do this in two or more places until the wear sleeve
is loose.
NOTICE
If the crankshaft rear seal and wear sleeve come apart during
installation, the seal and wear sleeve become scrap. A new seal and
wear sleeve must be installed as a set.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 01/09/2013
926 WHEEL LOADER 94Z00001-02208 (MACHINE) POWERED BY 3204 ENGIN... Page 3 of 3
NOTE: The correct lubricant is on the new wear sleeve and seal group and no additional lubricant
is necessary.
1. Install the crankshaft rear seal and wear sleeve with tooling (A) as follows:
a. Clean and prepare the crankshaft outside diameter with 6V1541 Quick Cure Primer. Apply
9S3265 Retaining Compound to the crankshaft outside diameter.
b. Install locator (3) and the bolts on the rear of the crankshaft.
c. Put wear sleeve (2) and seal (1) as a unit on locator (3) with the lip of the seal toward the front
of the engine.
e. Put clean engine oil on the face of nut (4), and install it on the locator. Tighten the nut until
installer (5) makes contact with locator (3). Remove tooling (A).
END BY:
a. install flywheel
Copyright 1993 - 2013 Caterpillar Inc. Sun Sep 1 21:22:17 EST 2013
Todos los derechos reservados.
Red privada para licenciados del SIS.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 01/09/2013