Professional Documents
Culture Documents
METHOD STATEMENT
1 RECOMMENDED AREA
2 RECOMMENDED SURFACES
2.1 Concrete surface shall be clean, dry, free of honey-combs, coating, oil or laitance.
3 MATERIALS
4.1 Measure the length of the expansion joint, cut the Flexatec 1200 to desired length
and glue the section before installing.
4.2 Apply ADESILEX PG2 SP to both sides of the expansion joint at a thickness of
1mm using brush and as well as the joint surface.
4.3 Install the FlexAtec 1200 by squeezing it and press firmly into the construction
gap
4.4 Clean excess ADESILEX PG2 SP from top of Flexatec 1200 and sides of the joint
Page 1