Professional Documents
Culture Documents
Company name
Contact
Technical data Phone number
e-mail address
Operating data
1 Pumpe type Single head pump Fluid Water
2 No. of pumps 1 Operating temperature t A °C 20
3 Nominal flow m³/h 17.6 pH-value at t A 7
4 Nominal head m 132 Density at t A kg/m³ 998
5 Static head m 0 K in. viscosity at t A mm²/s 1
6 Inlet pressure bar 0 Vapor pressure at t A bar 1
7 Environmental temperature °C 20 Solids 0
8 Available system NPSH m 0 Altitude m 0
Pump data
9 Design Basins
10 Execution Standard version Max. mm 106
11 Operating speed rpm 2864 Impeller Ø designed mm 14x 106 mm
12 Number of stages 14 Min. mm 0
13 Suction nozzle protected by strainer Nominal m³/h 17.9 ( 17.9 )
14 Discharge nozzle Rp 2 1/2 / EN 10226 Flow Max- m³/h 21.7
15 Max. casing pressure bar Min- m³/h 7.5
16 Max. working pressure bar 17.3 Nominal m 137
17 Impeller type Semi axial impeller Head at Qmax m 101
18 Head H(Q=0) m 180 at Qmin m 173.7
19 Total weight kg 78.5 Shaft power kW 9.43
20 Max. shaft power kW 9.7 Power input kW 11.88
21 NPSH 3% m 3 Efficiency % 70.84
Materials
22 Pump Submersible motor
23 Discharge head Stainless steel, 1.4308, ASTM CF-8 (AISI 304) U pper bracket Cast iron, EN-JL 1030, Class 25 B
24 Valve support Stainless steel, 1.4308, ASTM CF-8 (AISI 304) Spacer Cast iron, EN-JL 1030, Class 25 B
25 Valve Stainless steel, 1.4301, AISI 304 Cable EPR
26 Elastomers EPDM Shaft end AISI 431
27 Bolts and screws Stainless steel, 1.4301, AISI 304 Elastomers NBR
28 Shaft sleeve and bushing Tungsten carbide Motor sleeve Stainless steel, 1.4306, AISI304L
29 Thrust bearing PTFE+Graphite L ower bracket Cast iron, EN-JL 1030, Class 25 B
30 Impeller Stainless steel, 1.4301, AISI 304 Thrust bearing bracket Cast iron, EN-JL 1030, Class 25 B
31 Diffuser Stainless steel, 1.4301, AISI 304
32 Spacer Stainless steel, 1.4057, AISI 431
33 Tie rod Stainless steel, 1.4301, AISI 304
34 Cable guard Stainless steel, 1.4301, AISI 304
35 W ear rings Technopolymer PPO
36 Strainer Stainless steel, 1.4301, AISI 304
37 Shaft Stainless steel, 1.4057, AISI 431
38 Coupling Stainless steel, 1.4057, AISI 431
39 Lower support Stainless steel, 1.4308, ASTM CF-8 (AISI 304)
40
41
Motor data Cable
42 Manufacturer L owara Type L 6W110T405/C-SD Cable type
43 Specific design AISI 304 - 3ph water filled rewindable motors Cable cross section mm²
44 Rated power 11 kW Phases 3 Environmental temperature °C 20
45 Corrected motor power11 kW No. starts / h max. 20 cable length m
46 coolant speed min. 0.3 m/s Weight 54 kg
47 Rated current 23.6 A Electric voltage 400 V
48 Reduced current 23.6 A Starting mode Star-delta
49 Degree of protection IP68 Nominal speed 2830 rpm
50 motor connection Installation
Remarks
Power datas refered to : hydr. Performance acceptance acc. To EN ISO 9906 Class Grade 3B
Water [100%] ; 20°C; 998kg/m³; 1mm²/s
[m] Head 1
175
170
165
160
155
150 Eff.
145
71.3%
140
135 137 m
130
125
120
115
110
105
100 14
95
90
85
80
75
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0 70.8 %
[%] Efficiency
60 Overall efficiency 14
50 14 56.2 %
40
30
20
10
0
[m] NPSH-values 14
3.8
3.6
3.4
3.2
3.0 2.97 m
2.8
[kW]
Power input P1 11.9 kW
12 Shaft power P2 14 (P1)
10 14 (P2)
8 9.43 kW
6
4
[rpm] Speed
2940
2920
2900
2880
2860 17.9 m³/h 14 2861.6 rpm
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [m³/h]
LP
LM
Connections
Suction nozzle Discharge nozzle
protected by strainer Rp 2 1/2
EN 10226