Professional Documents
Culture Documents
BRAND: EPSON
INK COLOR: C9345/C12C934591/PXMB9
COMPATIBLE DEVICES: Printer
SPECIAL FEATURE: Wireless
COMPATIBILITY OPTIONS: Remanufactured
COLOR: C9345/C12C934591/PXMB9
PRODUCT DIMENSIONS: 5.91 x 2.76 x 3.54 inches
ITEM WEIGHT: 4.6 ounces
Introduction
Printer-specific C9345 Ink Maintenance Tank Box. nk Maintenance Tank Box Strong ability for absorption, high-
quality sponge. It has intelligent chip, quickly detected by printer. It performs flawlessly, High Quality Ink Maintenance
Tank Box eliminates printer head damage and prevents any printing head clogging.
Ink that is removed from the system during print head cleaning is kept in the maintenance box. You must replace it
when an ink cartridge runs out or the maintenance box reaches the end of its useful life.
Using the LCD display of your device, you may determine the condition of your maintenance box. Using the home
button is optional. Press the OK button after selecting Maintenance > Maintenance Box Service Life. The
maintenance box’s remaining ink capacity is visible.
On the product’s back, remove the cover for the maintenance box.
Carefully remove the maintenance box without tilting it.
Take the new maintenance box out of the box.
Insert the maintenance box completely after lining up the rails inside with the groove on the maintenance box.
To reset the maintenance tank counter, locate the “Maintenance Tank” menu choice using the arrow keys, and then
press the right arrow key.
To prevent ink leakage, you cannot print or clean the print head when the maintenance box is full. You can, however,
carry out non-ink tasks like scanning. The component cannot be changed by users after the next screen appears.
Speak with Epson support.
Note: Until the maintenance box is replaced, printing or print head cleaning are not possible when it is full. You can
still carry out tasks like scanning that don’t need ink.
Generally speaking, your printer maintenance kit should be updated every one to two years.
The maintenance box contains less waste ink. the tank’s available capacity increases.
A maintenance box that has been uninstalled and removed for longer than a week should not be used again. Keep
the maintenance box out of the sun’s direct rays. Note: While the maintenance box is full, you can still scan and
conduct other operations that don’t require ink, but you can’t print or clean the print head.
The maintenance box’s useful life is almost up. The service life of the maintenance box has expired. You must swap
it out. To continue printing, the maintenance box must be changed. The life of an ink pad in a printer is about to
expire.
It won’t be necessary to clean your printer’s interior frequently. Generally, depending on how often you use it, strive
to clean it every four to eight months.
Except when replacing the maintenance box, avoid removing the maintenance box or its lid because doing so could
cause ink to leak.
Generally speaking, your printer maintenance kit should be updated every one to two years.
Ink that is removed from the system during print head cleaning is kept in the maintenance box. You must replace it
when an ink cartridge runs out or the maintenance box reaches the end of its useful life.
To prevent ink leakage, you cannot print or clean the print head when the maintenance box is full. You can, however,
carry out non-ink tasks like scanning. The component cannot be changed by users after the next screen appears.
Speak with Epson support.
The maintenance box contains less waste ink. the tank’s available capacity increases.
The maintenance box’s useful life is almost up. The service life of the maintenance box has expired. You must swap
it out. To continue printing, the maintenance box must be changed. The life of an ink pad in a printer is about to
expire.