CALIBRATION RESULTS
Refer Certificate No. 01-C455775
2Uncertainty [Tolerance timit |
‘Ground Loop Resistance
Toon o2968 come asset ines
3.0000 30220 oot 87651057350
12000 01a oot 152012480
0.008 9950 008 ge.isio91850
11000 70380 088 ws7ene30 |
700.00 72980 coin 193.0r0207.00
400.00 398.80 | 0.020 375.0 to 425.00
600.00 5950 | 0.020 530.0 to 670.0
un000 70990 corn 001013200
Ground Leakage Current (mA)
0,300 mA @ 60 Hz 0.300 ma 0.003 mA 0.244 to 0.356 mA
0,900 mA @ 60 Hz 0.901 mA 0.003 mA 0.832 to 0.968 mA
1.100 mA @ 60 Hz 1.103 mA 0.003 mA 1.05 to 1.15 mA.
3.000mA @ 60H S0E mA C2 mA 3.7910821mA
11.00 mA @ 60 Hz 11.02 mA OMA 10.5 to 11.5 mA
90.00 mA @ 60 Hz 90.2 mA 0.3mA 87.9 to 92.1mMA
110.0 mA @ 60 Hz 110.1. mA 0.3mA 105 to 115 mA
S00.0mA @ 60 He OSE 00038 37310321 mA
‘Ground Leakage Current (A)
1.000 A @ 60 Hz 1.0034 0.003 A (0.95 to 1.05.8
5.000 A @ 60 Hz S.01A O.01A 4.87 t05.13 A
10.00 A @ 60 Hz 10.02 0.018 9.77 t0 10.23 A
15.00 A @ 60 Hz 15.024 001A 14.67 1015.33
20.00 A @ 60 He 20.03 O01 19.57 10 20.43.
25.00 A @ 60 Hz 24.04 0.018 24.47 025.53 A
30.00 A @ 60 Hz 30.04 A 001A 29.37 to 30.63 A
-END OF CALIBRATION RESULTS-
Date: 04 December 2022
Instrument: EarthGround Clamp Ser.No__: §3170129WS Client _:_Natco Power Co. Ltd
Page 2we fe B deka! uli 3g! ceuluclld Ags pal! AS pitti
@Lea.C! Arabian Calibration Dev. Rep. Co. LLC
aS 0 Box 24850 Sharjah, UAE, Tel +971 6 5345747, Fax +9716 5345727 QEQbCal
- Ema: s@arabealcom wwwarabeal.com
feriiie no = oLcaSs7E-Reva WON = WABSEANOV.2 ont eee SONOHEMBR
se oie: os becember2022__abLoctn Insti ven Shah UAE ob oan tab
‘Gustomer Details:
Name Natco Power Co. Ltd Area
rss Repub of Yorn
inane st
Peston > Documenting Paces Clvator Waele em 7
erfacter + ke tones oir
hcuraey :Raeraitraton Rests PartNo: = sera epi ser No, = 440006
hortao RestttsGrunton + ReleCliraion ets
femperature: 22.14 Atm - Pressure: Relative Humidity 52.34 %RH
arab! certifies tha the messured poate mest te specication, a stated inthe referenced calrationprocedure/Guideline/Interationl standard or as tated by the
smanufatrer/ustomer. Cllration ofthe abovementioned equipment has been eared cut in accordance wit the requirements specified in ISO/IEC 17025:2017,
Standare. This certfeate fs sued in compliance with the laboratory aceredtation requirements of Eirtes Intemational Accreditation Contre EAC) t provider
traceabilty of measurement fo the System of units and orto units of measurement realizes atthe Emiates Metoiogy sttute or ater recognized national matrlogy
inetates {NPL MT ete Th repo" applies ony tothe instrument Iden above and (shall not be reproduced other than in full except with specie wnten
pproval of Arabal, The reported eats are valid onl tthe time of alaton and it provides no guarantee that he unt wl main acurte between te calibration
‘ie uncertainty limits quoted eee to the measured vlues ony, with ne aecount berg taken ofthe istrments ality 19 maintain is cabration. Uncertainty of
‘turement i arcounted inthe dedson rl for stating conformity, The reported expanded uncertainty is based upon a tandard uncertainty multiplied bya coverage
faetr te, providing 2 confdonc evel of approximately 95%, The uncertainty evaluation has ben dave from EA-4/02 "Evaluation ofthe Uncertainty of Measurement
incalbraon", Confort statements ae based on simple acceptance rule (LAC-G8:09/2019) where, Acceptance Umit Al) equals Tolerance Lim (Tu) Prose tat
the Tolerance Uncerainty Ratio (TURl>= :. Statement of conformity provided inthis carticateis valid only for the measurement points where the Tolerance
Uncertainty Rati (TUR) >8 11
Statement of conformity is bated on Manufacturer specication, suanc ofthis ceria indicates uccessul calibration (Resut of eliration: PASS)
seterece cedure C/SIECT Re? basen tune cESL.CVOUMLReS Teal ages
Shon curnmet cesta Reve ove etod we Ot
somes Cont: Satan sft conioncalborated
comments:
iu
‘Main Master eauipmentused
Peseristion Teval amber [Modelo No | Callration Due | Traceability
Dar nate ons 2002 GB overber2003 — — Bayonse/sAa72
Mult Produ alrator aera ona 07 ocbe 2023 P4870
[albration Date : 04 December 2022 ‘Due Date (as per customer request) :_03 December 2023)
allpated By: Rocky(Calibration Technician) ___--=-Aporovedsignttnne==tMiyad Uniciryatt Hydrose (Operation Manager)
Signature Rooke: i Cl 1ED mt
Snapon Ani i IOKI Megger.
il agrye 345747, 2971 8 5248727"CALIBRATION RESULTS
Refer Certificate No.: 01-C455781
‘MEASURING
Range Applied Indicated Error 4Uncertainty
“DCVoltage Accuracy: 2(0.02%rdg + Sdgt)
100.000 mv 100 mv 99.998 mv -0.002 mv o.01mv
av 0.99996 V -0.00004 v 0.00004 v
3.00000 V
2Vv 1.99992 -0.00008 v 0.0001 v
10V 9.9997 0.0003 V 0.001 v
30,0000 v
20v 19.9992 0.0008 V 0.001
300 100.00 V 0.00 o.01v
300.00
300 299.99 oo1v 0.04v
‘AC Voltage Accuracy: #{0.5%rdg + 20st)
1V @ 206 He 1.000 0.000 0.001
3.000 V
2V@ 56H 2.000 V 0.000 v oo1v
10V @ 200K 10.02 002 oo1y
30.00
20V @ 56 Hz 20.03 0.03 O01
100 V @ 206 He 100.2 02v o1v
300.0
300 V @ 56 Hz 3005 o5V o3v
Resistance Accuracy: #(0.059%rdg + 0.0500)
10.0009 109 10250 0.040 010
100.009 1000 100.30 019 020
1.0000 kA 1k0) 1.002 kA 0.001 ka 0.0001 ka
10,000 ka 10ko 10.001 kA 0.001 ka 0.001 kA
DC Current Accuracy: #(0.01%rdg + SHA)
ima 1.000 ma 0.000 ma 0.001 ma
Sma 4.999 mA 0.001 mA 0.001 ma
30.000 ma
10 mA 9.989 ma 21001 mA 0.001 ma
20mA 19.999 mA “0.001 mA 0.002 ma
110.00 ma 100 ma 100.00 mA 0.00™ma 0.02 ma
Frequency Accuracy: = Ségt
100 Hz 100.00 Hz 0.00 He oot ke
1.00 kHe
1 kHe 1000.0 He oon 0.0001 KHz
Instrument: Process Calibrator Ser.No__: 45140006 Client: Nateo Power Co. td
Page 2