Professional Documents
Culture Documents
CONTENTS
5 12 15
The ULTIMATE in electrical and live line protection TOOL KITS TORQUE RATCHETS & SOCKETS
Thermoplastic recipe
Johannesburg
South Africa
Perth
Australia • Tool and insulation bond as one
29 31 32
DRIVERS HEX KEYS LINK EXTRACTORS
• Withstand extreme impact and abrasion
• Flame Retardant
2 3
THE FACTS SPEAK FOR THEMSELVES
TOOL KITS
To complement our comprehensive standard range, we can offer
ITL is the only manufacturer Unique Nylon a totally customisable service. Choose your own selection of tools
to insulate its tools with Thermoplastic injection
Nylon Thermoplastic moulding process presented in our orange case, 8 or 12 pocket tool roll, tube or pouch.
Increases tool safety and durability
In addition, order a specified minimum quantity and we can supply
0 0 0
NYLON PVC NYLON PVC NYLON PVC
11 POWDER 11 POWDER 11 POWDER
BESPOKE
SERVICE AVAILABLE
CONTACT CUSTOMER SERVICE FOR MORE DETAILS:
Email: enquires@insulatedtools.co.uk
Tel: 01342 324255
Lifetime Warranty All ITL tools are accredited to
on tool and insulation International Standard
IEC 60900:2018
including category ‘C”
for operation within greater
LIFETIME WARRANTY temperature range
TOOL & INSULATION -40º to +158ºF
4 5
The ITL team are inspired by MAXWELL
the great British scientists of the past James Clerk Maxwell was perhaps the most important
physicist you may not have heard of. Certainly the greatest
who made the electrical discoveries Scottish scientist of all time, he is credited with discovering
that our business relies on every day. that light, electricity and magnetism are all aspects of the
same phenomenon.
1/4” DRIVE SOCKET SETS globally allowing people all over the world to work safely and productively.
Daniell
LINK BOXES
John Frederic Daniell
Link boxes, also known as low voltage network boxes, are
invented the Daniell Cell,
one of the forerunners of the linchpins of the electrical distribution network.
the modern battery. His cell
As our demand for electricity increases, DNO’s are under
was so revolutionary that its
output was used to benchmark increasing pressure to keep power outages to a minimum
what the value of 1 volt would be – and maintain a reputation for reliable supply. They use link
so when we test our tools at 10,000v, it’s Code No Description
03097 24 PIECE SOCKET & BIT SET
boxes as switching points, allowing electricity to be rerouted
the equivalent of 10,000 Daniell Cells!
We are proud to name our premier 01775 Reversible Ratchet in the event of a cable fault. This ability to electrify and de-
01778 6” Extension
battery maintenance kit after him. electrify parts of the distribution network is essential.
07200 4mm Socket
Code No Description 07203 5.5mm Socket
At ITL we have been at the forefront of coming up with
00022 DANIELL 8 PIECE BATTERY SET 07204 6mm Socket
01060 8mm Offset Ring Spanner 07206 7mm Socket
bespoke solutions for link box maintenance. Many link
01070 10mm Offset Ring Spanner 07208 8mm Socket boxes in urban areas date from the early 20th Century and
01080 13mm Offset Ring Spanner 07210 9mm Socket
have features that present challenges to engineers, such
01775 Reversible Ratchet 07212 10mm Socket
07208 8mm Socket 07214 11mm Socket as difficult to access links, obscure gauge sizes (eg. ½”
07212 10mm Socket 07218 13mm Socket
Whitworth) and archaic link housing. We have developed
07218 13mm Socket 07220 14mm Socket
07350 Bit Adapter and Bits 07350 Bit Adaptor and Bits solutions for all these and more.
TOOLS
Code No Description
00013 7 PIECE METRIC 1/2” DRIVE
01381 13mm Deep Socket
01411 16mm Deep Socket
01421 17mm Deep Socket
Innovative, fully tested and certified range of 01425 18mm Deep Socket
insulated torque tools, ensure correct tightening of 01491 24mm Deep Socket
01495 28mm Deep Socket
Precision live connectors. Designed to help address the problem of 01745 Torque Wrench
using our gap technology Clear dual scale 01631 3/4” Deep Socket
01671 1” Deep Socket
so no sparks jump the in Nm and lbf/ft
01745 Torque Wrench
gap ensuring maximum on every tool
personal protection Impact resistant
polycarbonate
tubing Cooke
After getting advice from Michael Faraday, William Fothergill
Thompson Cooke joined with Charles Wheatstone to demonstrate the
Twist and push to set to correct output James Thompson may be less famous than his younger world’s first electric telegraph line. They ran it from Euston
brother William who became Lord Kelvin, but he is the man Station to Camden Town in front of a crowd of interested
to thank for introducing the word “torque” into the English onlookers. After securing a patent from the King they formed
language. It’s because of him that this kit contains the best the Electric Telegraph Company – which later become British
insulated torque wrench in the industry. This 3/8” kit is part Telecom. This special kit has been developed in collaboration
of our suite of specialist torque tools, and is ideal for working with BT, and continues their heritage for high quality and
on link boxes and other enclosed junction boxes. innovation.
To reverse ratchet direction 1/2” SQUARE DRIVE Code No Description Code No Description
Code No. Description THOMPSON KIT COOKE KIT
04203 04208
01745 Torque Wrench 5 PIECE METRIC 3/8” DRIVE METRIC 3/8” DRIVE
01746 Short Torque Wrench (Preset 8Nm) 01711 Short Torque Wrench (5-25Nm)
3/8” SQUARE DRIVE
01791 5” Extension 01716 8mm Socket
01785 Torque Wrench
01792 10” Extension 01718 10mm Socket
01711 Short Torque Wrench (5-25Nm)
Remove 02036 10mm Slotted Socket 01719 12mm Socket
01746 Short Torque Wrench (Preset 8Nm)
drive core 02037 12mm Slotted Socket 01720 13mm Socket
Insert in
01747 Short Torque Wrench (Preset 11Nm)
opposite 01721 14mm Socket
end 01748 Short Torque Wrench (Preset 12Nm)
01730 17mm Socket
SPECIAL 01740 19mm Socket
04204 1/2” Whitworth Spanner Torque Wrench 01742 22mm Socket
01791 5” Extension
Ergonomic
rotary dial
for easy drive
reversibility
14 15
SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVE SOCKETS & ACCESSORIES - 1/2” SQUARE DRIVE
METRIC IMPERIAL DEEP METRIC DEEP IMPERIAL 6 POINT HEX KEY METRIC HEX KEY IMPERIAL SLOTTED
Code No Description Code No Description Code No Description Code No Description Code No Description Code No Description Code No Description Code No Description
01330 8mm 01565 5/16” 01351 10mm 01566 5/16” 01333 8mm 02769 3mm 02771 3/16” 02040 5.5mm
01340 9mm 01570 3/8” 01361 11mm 01571 3/8” 01343 9mm 02767 4mm 02772 1/4” 02031 8mm
01350 10mm 01580 7/16” 01371 12mm 01581 7/16” 01353 10mm 02763 5mm 02773 5/16” 02034 10mm
01360 11mm 01590 1/2” 01381 13mm 01591 1/2” 01363 11mm 02764 6mm 02774 3/8” 02035 12mm
01370 12mm 01600 9/16” 01391 14mm 01601 9/16” 01373 12mm 02766 8mm 02775 7/16”
01380 13mm 01610 5/8” 01401 15mm 01611 5/8” 01383 13mm 02765 10mm 02776 1/2”
01390 14mm 01620 11/16” 01411 16mm 01621 11/16” 01393 14mm 02758 12mm 02777 9/16”
01400 15mm 01630 3/4” 01421 17mm 01631 3/4” 01403 15mm 02778 5/8” EXTENSION BARS
01410 16mm 01640 13/16” 01425 18mm 01641 13/16” 01413 16mm 02779 3/4” Code No Description
01420 17mm 01650 7/8” 01441 19mm 01651 7/8” 01423 17mm 01760 5”
01430 18mm 01660 15/16” 01451 20mm 01661 15/16” 01433 18mm 01770 10”
Protective design
to allow a secure
hold when rotating
and pulling
Ergonomic, injection
moulded handles –
tool and insulation
bonded as one
Highest quality
cutting edges –
maximum cutting
performance
20 21
PLIERS PLIERS
SNIPE NOSE PLIERS BENT NOSE PLIERS WIRE STRIPPING PLIERS CRIMP PLIERS
Code No Description Code No Description Code No Description Code No Description
00051 6” Snipe Nose Pliers 00071 6” Bent Nose Pliers 00170 6” Wire Stripping Pliers 00177 Crimp Pliers
00061 8” Snipe Nose Pliers 00081 8” Bent Nose Pliers 00175 Curved Wire Stripper
CUTTERS
ARMOUR SAW
Code No Description
03060 Armour Saw
KNIVES
Thumb stops for ultimate
safety, setting ITL apart.
We incorporate this design
quirk for use in those dark,
tight spaces
Comfortable to hold
CORING KNIFES HACKING KNIFE with ergonomic design
Code No Description Code No Description
01830 Coring Knife 01840 Hacking Knife
01832 Short Blade Coring Knife
High torque,
dimensionally
accurate and
NYLON HACKING KNIFE LINESMAN HOLSTER KNIFE
precise quality
Code No Description Code No Description base tools
01845 Nylon Hacking Knife 01835 Linesman Holster Knife
SPECIALS
24 25
OPEN ENDED SPANNERS TOTALLY INSULATED RATCHETING RING SPANNERS TOTALLY INSULATED
METRIC IMPERIAL WHITWORTH METRIC IMPERIAL
Code No Description Code No Description Code No Description Code No Description Code No Description
00274 7mm 00423 1/4” 00180 3/16” 07010 10mm 07050 3/8”
00275 8mm 00425 5/16” 00190 1/4” 07011 11mm 07051 7/16”
00427 11/32” 00200 5/16”
00277 9mm 07013 13mm 07052 1/2”
00430 3/8” 00210 3/8”
00280 10mm 07014 14mm 07053 9/16”
00440 7/16” 00220 7/16”
00290 11mm 07016 16mm 07054 5/8”
00441 1/2” 00230 1/2”
07017 17mm 07055 11/16”
00295 12mm 00450 9/16” 00240 9/16”
07019 19mm 07056 3/4”
00300 13mm 00455 5/8” 00250 5/8”
07022 22mm 07057 13/16”
00310 14mm 00460 11/16” 00260 11/16”
00470 3/4” 00270 3/4” 07024 24mm 07058 7/8”
00320 15mm
00475 13/16” 07059 1”
00330 16mm
00480 7/8”
00340 17mm 15/16” General Use versions
00485
00350 18mm 00490 1” also available
00360 19mm 00500 1 1/4”
00370 20mm
00380 21mm
00390 22mm
00400 23mm
00410 24mm ADJUSTABLE WRENCHES
00417 27mm
Code No Description
00420 30mm
03000 8” Adjustable Wrench
03005 10” Adjustable Wrench
General Use versions 03010 12” Adjustable Wrench
also available
03020 15” Adjustable Wrench
03015 12” Hammerhead Adjustable Wrench
Code No Description
00231 1/2” Whitworth 15 Degree Crank
Ergonomic
tri-globular
grip design
28 29
SCREWDRIVERS NUT DRIVERS
01880 75mm x 5mm x 1mm 02300 4mm 02333 3/8” 02830 10mm
01890 150mm x 5mm x 1mm 02310 5mm - 25mm Nut Clearance 02334 7/16” 02840 13mm
POZIDRIV 01900 150mm x 5mm x 1mm 02311 5mm - 150mm Nut Clearance 02335 1/2” 02850 17mm
Code No Description Reduced Shank 02320 6mm - 25mm Nut Clearance 02336 9/16” 02890 19mm
TORX
01979 75mm x 3mm x No.0 01910 203mm x 5mm x 1mm 02321 6mm - 50mm Nut Clearance 02337 5/8”
Code No Description
01980 75mm x 5mm x No.1 01915 125mm x 6.5mm x 1.2mm 02250 7mm IMPERIAL – ‘T’ HANDLE
02701 T7
01981 75mm x 5mm x No.1 01920 150mm x 6.5mmm x 1.2mm 02280 8mm WHITWORTH Code No Description
02702 T10
Special 01930 100mm x 6.5mm x 1.2mm Code No Description 02860 5/8”
02703 T15 02290 10mm
01989 200mm x 5mm x No.1 01940 150mm x 8mm x 1.2mm 02218 3/16” 02870 11/16”
02704 T20 02291 11mm
01990 100mm x 6mm x No.2 01950 150mm x 8mm x 1.2mm 02219 1/4” 02880 3/8”
02705 T25 02341 13mm
01991 100mm x 6mm x No.2 Reduced Shank
Special 01960 203mm x 10mm x 1.6mm 02706 T27
WHITWORTH – ‘T’ HANDLE
02000 150mm x 8mm x No.3 01970 254mm x 10mm x 1.6mm 02707 T30
Code No Description
02210 235mm x 6mm x No.2 02708 T40
02800 3/16” Whitworth
02709 T50
02810 1/4” Whitworth
02811 5/16” Whitworth
PHILLIPS
Code No Description
02005 75mm x 3mm x No.0 HEX KEYS
02010 75mm x 5mm x No.1
02020 100mm x 6mm x No.2
02030 150mm x 8mm x No.3
‘T’ HANDLE SHORT ‘T’ HANDLE SCREWDRIVER HANDLE
Code No Description Code No Description Code No Description
02670 3mm 02735 3/16”’ 02590 3mm
02680 4mm - 5/32” 02600 4mm
LIGHT ‘T’ HANDLE
02690 5mm 02610 5mm
Code No Description
02700 6mm 02620 6mm
02627 2mm
02746 8mm 02630 1/8”
02628 2.5mm
02739 9mm 02650 3/16’
02760 3mm
02761 10mm 02660 1/4”
02631 4mm
02768 12mm
02632 5mm
02710 1/8” COOKER KNOB
02730 3/16” Code No Description
02731 7/32” 02751 2mm
02740 1/4” 02750 3mm
02742 5/16”
02743 3/8”
02744 7/16”
02745 1/2”
High
accuracy Polycarbonate
hook
32 33
CORE BENDING BARS FUSE CARRIER SHROUDS
INTERNAL EXTERNAL Code No Description Code No Description
MIRRORS
Code No Description
01850 Inspection Mirror
01851 Large Inspection Mirror TIGHTENING TOOL
SHEATH LIFTING TOOL
01852 Adjustable Extension Handle Code No Description
Code No Description
03109 Tightening Tool
03108 Sheath Lifting Tool
NON CONDUCTIVE
TAPE MEASURE
SAFETY HOOK Code No Description
HOLDING TOOLS
Code No Description
03116 Universal Holding Tool
03117 95mm Holding Tool
03118 120mm Holding Tool
TOOL CARRIERS
03119 185mm Holding Tool
Code No Description
03120 300mm Holding Tool SWITCHBOARD 03190 8 Pocket Tool Roll
03122 Holding Tool for Wave Form Connector MATTING 03191 12 Pocket Tool Roll
Code No Description 03199 Holdall
05145 Switchboard Matting 03200 Case
RELEASE TOOL WEDGES
Code No Description Code No Description
03103 Release Tool 03070 Wedge
03075 Hybrid Neutral
UMBRELLA
Code No Description
03193 Umbrella
FLEX AND GRIP FLEX AND GRIP FLEX AND GRIP ARC FLASH
CLASS 0 CLASS 1 CLASS 2 CLASS 0
Code No Size Code No Size Code No Size Code No Size
05154 8 05158 8 05162 8 05180 8
05155 9 05159 9 05163 9 05181 9
05156 10 05160 10 05164 10 05182 10
05157 11 05161 11 05165 11 05183 11
COTTON GLOVES
Code No Description
05149 Cotton Gloves OVERGLOVES
Code No Description
05150 9B
05151 10C
PNEUMATIC 05152 11D
GLOVE TESTER
05154 12E
Code No Description
05153 Pneumatic Glove Tester
36 37
EQUIVALENT STANDARD BOLT DIAMETERS EQUIVALENT STANDARD BOLT DIAMETERS
METRIC MEASUREMENTS AMERICAN MEASUREMENTS BRITISH MEASUREMENTS METRIC MEASUREMENTS AMERICAN MEASUREMENTS BRITISH MEASUREMENTS
BOLT SIZE BOLT SIZE NOMINAL SIZE BOLT SIZE BOLT SIZE NOMINAL SIZE
Large Hex
Large Hex
Small Hex
Small Hex
BS 1083
BS 1083
BS 192
BS 192
Norwegian
Norwegian
small 1414
small 1415
small 1414
small 1415
large 1412
large 1413
large 1412
large 1413
Nuts and
Nuts and
Nuts and
Nuts and
BSW
BSW
Screws
Screws
Screws
Screws
Screws
Screws
Screws
Screws
Normal
Normal
French
French
Screw
Screw
Large
Large
Sizes
Sizes
Sizes
Sizes
Cap
Cap
Cap
Cap
Hex
Hex
Hex
Hex
Nut
Nut
mm Inch mm W BS BA Inch mm mm Inch mm W BS BA Inch mm