Professional Documents
Culture Documents
Material Properties Requirements
Material Properties Requirements
Fully killed plates shall be heat treated to produce grain refinement by either normalizing
or heating uniformly for hot forming.
Must meet the impact test requirements of API 650 (if applicable for material thickness)
QE SPECIFICATION ES.5.06.0006 REQUIREMENTS: FOR ANNULAR & SHALL PLATES OF
TANKS WITH TOTAL VOLUME LESS THAN 15000 M3.
The steel shall contain not more than 0.23% carbon, 0.05% sulphur and 0.05%
phosphorus, as determined by ladle analysis.
The steel shall have a guaranteed minimum ultimate tensile strength of at least 363 MPa
and a maximum ultimate tensile strength of not more than 510 MPa.
The steel shall have a guaranteed yield strength of at least 206 MPa.
General Requirements:
Material certification shall be 3.2