Professional Documents
Culture Documents
RJ-6 構造図
9
5
6 7 8
8 Adhesive Epoxy
Fig. 1
2
Top adjustment
1 3 RJ-6P
❈ The above part numbers are all available with the respective combination of
2
<Nominal resistance values> (Fig. 1).
1 3 RJ-6W ❈ Verify the above part numbers when placing orders.
2 The products indicated by A mark are manufactured upon receipt of
RJ-6S 50 pcs./pack order basis.
Side adjustment 1 3
( ↑ Adjustment 3 1
direction)
2
RJ-6X
3 1
■ MECHANICAL CHARACTERISTICS
Mechanical angle 270 ° (1 turn)
■ ELECTRICAL CHARACTERISTICS
Operating torque 2~ 15 mN·m {20 ~ 153 gf·cm}
Nominal resistance range 10 Ω ~ 5 MΩ
Stop strength 50 mN·m {510 gf·cm} minimum
Resistance tolerance ± 10 % 200 cycles
Rotational life 10 Ω ~ 200 Ω [ Δ R/R ≦ ± (0.5 Ω +3 %)]
Power ratings 0.5 W (70 °C) 0 W (120 °C) 500 Ω ~ 5 MΩ [ Δ R/R ≦ ± (0.5 Ω +2 %)]
10 N {1.02 kgf} minimum
Terminal to strength
(B) (Tensile strength)
Resistance law
Linear law
Thrust rotor 10 N {1.02 kgf} minimum
Maximum input voltage DC200 V or power rating, whichever is smaller
Solderability 245 ± 3 °C, 2 ~ 3 s
Maximum wiper current 100 mA or power rating, whichever is smaller { }:Reference only
Flow
260 ± 3 °C, 5 ~ 6 s, two times maximum
Soldering heat [ Δ R/R ≦ 1 %]
Manual soldering
380 ± 10 °C, 3 ~ 4 s
Δ R/R:Change in total resistance
S.S. :Setting stability
RJ-6
CERMET TRIMMERS
RJ-6W 外形図
2.5
φ 7 +0.3
0
5.3
● RJ-6W 5.8 7±2 3 2.5 2.5 1
Top adjustment
0.5 W × 2.6 L × 0.8 D Resistance code &
Production date code 3 – φ 0.4 ± 0.05 2
270˚ Nom.
1.3 ± 0.2
)
(2.5
6S 外形図
φ 7 +0.3
0
0.5 ± 0.2
2.5
5.2
2.5 2.5
1.1 ± 0.2
0.5
6±2
7 +0.4
0
3 –φ 0.4 ± 0.05
1 2 3
外形図
RJ-6
CERMET TRIMMERS
0.6
–0.1
6.6+0.4
8.7 +0.3
0
2.5
5.2
2.5 2.5
1.1 ± 0.2
0.5
7 +0.4
8.5 ± 2
1 3
270˚ Nom.
Resistance code &
3 – φ 0.4 ± 0.05 Production date code
0.5 W × 2.6 L × 0.8 D
■ PACKAGING SPECIFICATIONS
<Bulk pack specifications>
● Unit of bulk pack in a plastic bag is 50 pcs. per pack.
● Boxing of bulk in a plastic bag is performed with 200
pcs. (RJ-6F is 100 pcs.) per box.