Professional Documents
Culture Documents
900mm JACKING PIPE
900mm JACKING PIPE
Resins
- for the Internal Liner: Isophtalic
- for the Structural Wall: Isophtalic
Resin system dereating - 25%
Raw Material per square meter of pipe wall Inner Skin Core Outer Skin
Resin 484 13,302 484 g/m2
Chopped Glass 298 2,375 298 g/m2
Hoop Glass 1,080 950 1,080 g/m2
Sand - 30,879 - g/m2
Stiffness Data
Design Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Pipe Stiffnes AWWA (F/Dy for unit length) at 5.0% deflection 1,509,416 Pa
in US units 218.9 psi
Actual Initial Specific Stiffness ISO (at 0 % defection) 32,016 Pa
Level A Deflection (referred to 5% deflection pipe stiffness) 6.2 %
Level B Deflection (referred to 5% deflection pipe stiffness) 10.4 %
Expected Load for specimen width -> ISO ASTM
ISO = fixed width 300 mm; ASTM = max(300mm;0.2 x DN) 300 300 mm
Expected load at 3% deflection 13,385 13,385 N
Expected load at 5% deflection 21,747 21,747 N
Expected load at Level A deflection 26,705 26,705 N
Expected load at Level B deflection 42,329 42,329 N
Expected load at 30% deflection 99,264 99,264 N
HydroTest Data
Circumference elongation at 1x PN 1.3 mm
Circumference elongation at 2x PN 2.8 mm
End load on hydrotest machine at 1x PN 134 kN
End load on hydrotest machine at 2x PN 268 kN
Initial internal volume (12 m pipe length) 7,129.6 lt
Volume increase at 1xPN (12 m pipe length) 6.5 lt
Volume increase at 2xPN (12 m pipe length) 14.4 lt
1 ERROR FOUND
(1) To be tested at Split Disk Test or Mechanical Tensile Test
(2) AWWA or ASTM or ISO = Hoop Load at 4x PN
(3) AWWA or ASTM or ISO Standard; interpolated and merged value