Professional Documents
Culture Documents
1500mm JACKING PIPE
1500mm JACKING PIPE
Resins
- for the Internal Liner: Isophtalic
- for the Structural Wall: Isophtalic
Resin system dereating - 25%
Raw Material per square meter of pipe wall Inner Skin Core Outer Skin
Resin 807 22,199 807 g/m2
Chopped Glass 497 3,964 497 g/m2
Hoop Glass 1,800 1,586 1,800 g/m2
Sand - 51,533 - g/m2
Stiffness Data
Design Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Pipe Stiffnes AWWA (F/Dy for unit length) at 5.0% deflection 1,509,416 Pa
in US units 218.9 psi
Actual Initial Specific Stiffness ISO (at 0 % defection) 32,016 Pa
Level A Deflection (referred to 5% deflection pipe stiffness) 6.2 %
Level B Deflection (referred to 5% deflection pipe stiffness) 10.4 %
Expected Load for specimen width -> ISO ASTM
ISO = fixed width 300 mm; ASTM = max(300mm;0.2 x DN) 300 300 mm
Expected load at 3% deflection 22,308 22,308 N
Expected load at 5% deflection 36,244 36,244 N
Expected load at Level A deflection 44,509 44,509 N
Expected load at Level B deflection 70,548 70,548 N
Expected load at 30% deflection 165,440 165,440 N
HydroTest Data
Circumference elongation at 1x PN 2.1 mm
Circumference elongation at 2x PN 4.6 mm
End load on hydrotest machine at 1x PN 371 kN
End load on hydrotest machine at 2x PN 741 kN
Initial internal volume (12 m pipe length) 19,734.1 lt
Volume increase at 1xPN (12 m pipe length) 18.2 lt
Volume increase at 2xPN (12 m pipe length) 40.0 lt
2 ERRORS FOUND
(1) To be tested at Split Disk Test or Mechanical Tensile Test
(2) AWWA or ASTM or ISO = Hoop Load at 4x PN
(3) AWWA or ASTM or ISO Standard; interpolated and merged value