Professional Documents
Culture Documents
Resins
- for the Internal Liner: Isophtalic
- for the Structural Wall: Isophtalic
Resin system dereating - 25%
Raw Material per square meter of pipe wall Inner Skin Core Outer Skin
Resin 968 26,647 968 g/m2
Chopped Glass 596 4,758 596 g/m2
Hoop Glass 2,160 1,903 2,160 g/m2
Sand - 61,860 - g/m2
Stiffness Data
Design Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Specific Stiffness (Specific Stiffness at 5.0% deflection) 30,000 Pa
Actual Pipe Stiffnes AWWA (F/Dy for unit length) at 5.0% deflection 1,509,416 Pa
in US units 218.9 psi
Actual Initial Specific Stiffness ISO (at 0 % defection) 32,016 Pa
Level A Deflection (referred to 5% deflection pipe stiffness) 6.2 %
Level B Deflection (referred to 5% deflection pipe stiffness) 10.4 %
Expected Load for specimen width -> ISO ASTM
ISO = fixed width 300 mm; ASTM = max(300mm;0.2 x DN) 300 360 mm
Expected load at 3% deflection 26,769 32,123 N
Expected load at 5% deflection 43,493 52,192 N
Expected load at Level A deflection 53,410 64,092 N
Expected load at Level B deflection 84,658 101,590 N
Expected load at 30% deflection 198,528 238,234 N
HydroTest Data
Circumference elongation at 1x PN 2.5 mm
Circumference elongation at 2x PN 5.5 mm
End load on hydrotest machine at 1x PN 533 kN
End load on hydrotest machine at 2x PN 1,066 kN
Initial internal volume (12 m pipe length) 28,391.9 lt
Volume increase at 1xPN (12 m pipe length) 26.2 lt
Volume increase at 2xPN (12 m pipe length) 57.6 lt
2 ERRORS FOUND
(1) To be tested at Split Disk Test or Mechanical Tensile Test
(2) AWWA or ASTM or ISO = Hoop Load at 4x PN
(3) AWWA or ASTM or ISO Standard; interpolated and merged value