Professional Documents
Culture Documents
NURULHUSNA T MAT
RADZI SMJKCH 2020
Energy Sources
3.When the crank of the generator model is turned, a current known as induced current
is produced. The flow of this induced current ____________ the LED .
A connecting wire or solenoid is moved rapidly through the space between the magnetic
poles as shown in Figures 6.3 and 6.4. An ______________ is produced in the
connecting wire or solenoid, and it flows through the galvanometer. The pointer in the
galvanometer _________________.
A magnet is moved as shown in Figures 6.5 and 6.6 so that the magnetic field lines are
cut by the connecting wire or solenoid. An induced current is produced in the
connecting wire or solenoid, and it flows through the ______________. The pointer in
the galvanometer __________________.
3 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
a) ________________________ d) __________________________
b) _______________________ e) __________________________
c) _______________________ f) __________________________
Mechanism:
Energy change:
4 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
2. Power Station
using solar energy
Mechanism:
Energy change:
5 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
3.Hydroelectric
Power Station
Mechanism:
Energy change:
6 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Mechanism:
Energy change:
7 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
5. Power Station
using nuclear fuel
Mechanism:
Energy change:
8 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
6. Power Station
using biomass
Mechanism:
Energy change:
9 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Meaning
Sources
Form of waves
Examples
10 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
6.2 Transformer
1. A transformer is a ________________________________________________
________________________________________________________________
________________________________________________________________
_________________________
TRANSFORMER EQUATION
EXAMPLE 1
12 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Example 2 :
A transformer has 1800 turns at the primary coil and 600 turns at the secondary coil.
Given the total supply voltage is 240 V. Calculate the output voltage for the
transformer.
Solution:
Example 3
Diagram below shows a 12V bulb connected to a 240V power source that through a
transformer. What should be the number of turns in the secondary coil, Ns, for the
12V bulb to light up with normal brightness?
Solution:
13 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Component Functions
Power Station
Transformer station
Switch Zone
Main Substation
Branch Substation
14 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
a) ________________________
b) ________________________
2.
Electric meter
Main Switch
Fuse box
Types of
wires
Has fuse/
does not has
a fuse
Type of
electrical
appliances
(high or low
voltage)
Diagram
16 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
A) Fuse
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
___________________________________________________________________
B) Earth Wire
C) Circuit Breaker
1. Function:_____________________________________________________
a) ___________________________________
b)____________________________________
1._____________________________________________________________
2._____________________________________________________________
3._____________________________________________________________
4._____________________________________________________________
18 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
___________________________________________________________________
2.
Solution:
Electric power, P
19 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Example:
20 50 s
45 20 minutes
Electric current, I
Voltage, V
50 240
240 100
20 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
Solution:
Example 2:
Suzan boils water in an electric kettle marked 2.5kW, 240 V for 8 minutes. Calculate
the amount of current that flows through the kettle.
Solution:
1. Kilowatt-hour (kWh) is the electrical energy used at a rate of 1000 watts per hour.
21 PREPARED BY PN. NURULHUSNA T MAT
RADZI SMJKCH 2020
The table below shows appliances used by Husna at her home in a day.
= ____h
1.__________________________________________________________
2.__________________________________________________________
3.__________________________________________________________
4.__________________________________________________________