Professional Documents
Culture Documents
A truly wireless downhole gauge capable of delivering real-time data to surface without a single cable.
Key Features
» True wireless repeater free design requiring no calibration to wellbore,
production, or geological conditions
» Real-time wireless transmission of pressure, temperature, vibration, &
inclination data from EM6 surface interface to your desktop or mobile
devices
» High quality hybrid transducer platform utilized for improved
performance in elevated temperature and vibration environments
» Durable and flexible metallurgy sections available for sweet and sour
production conditions
» Leak proof design ensures maximum protection against gas and / or
fluid invasion
» Advanced system firmware with a focus on diagnostic health
monitoring of system performance
» ISO certified manufacturing process
Applications
• Production Engineering
• Production Optimization
• Reservoir Engineering
• Snubbing Workovers
• Completions Where Cable
Damage is Common
+1 (403) 453-1300
WWW
www.geopsi.com
support@geopsi.com Last Revised: 05272021
GEOEM 125
Stainless Steel 316L / Inconel 718
A truly wireless downhole gauge capable of delivering real-time data to surface without a single cable.
Wells with high vibration or frequent workovers will also benefit from
the elimination of clamps and gauge carriers. Removing them from the
completion simplifies workovers, and can reduce the number of items
which can potentially fall downhole and need to be fished out.
The battery sits above the sensor accounting for a majority of the mass of
the gauge. The health and remaining life of the battery can be monitored
from surface, and when the battery runs out it can be safely replaced
further extending the life of the gauge itself.
+1 (403) 453-1300
WWW
www.geopsi.com
support@geopsi.com Last Revised: 05272021
GEOEM 125
Stainless Steel 316L / Inconel 718
A truly wireless downhole gauge capable of delivering real-time data to surface without a single cable.
Our piezoresistive downhole gauges provide the absolute best reliability Our GEOEM 125 gauge is
and longevity for measuring downhole pressure & temperature. At comprised of two components.
GEO PSI we design and manufacture every component of our gauges in The first being the sensor ,
order to ensure that they can withstand even the most hostile downhole and second being the gap sub
conditions, while delivering exceptional value. assembly which houses the battery
and aids in the propagation of the
wireless signal. Our EM sensor is
Specifications the smallest on the market coming
in at only 7” in length.
Pressure, Temperature, Vibration, &
Measurement
Inclination
Overall Length 64″ / 162.56cm
2.375” / 60.325mm
Outside Diameter
2.875” / 73.025mm
Available Pressure Ranges 5,000 psiA
Pressure Accuracy 0.05% Full Scale
Pressure Resolution 0.04 psi
EM6 Surface
Temperature Rating
Temperature Accuracy
125°C
± 1°C
Interface Card
Temperature Resolution 0.1°C
Wireless Gauge Telemetry Decoder
Vibration Rating 0-16g
Inclination 0° to 90°
Sample Time 20 - 40 Seconds
Pressure Sample Rate 30 Seconds - 1 Day
Temp / Vibration / Tilt Sample Rate 10 Minutes - 1 Week
Telemetry 2-Channel 32-bit 10Hz
Battery Capacity 100,000maH
Low Power Setting 700ma
High Power Setting 1400ma
Sleep Power Setting 3ma continuous
Construction Material Stainless Steel 316L or Inconel 718
Leak Proof Design Yes
Field Programmable Yes
ISO Certified Manufacturing Yes
Compatible Surface Telemetry Decoder EM6
+1 (403) 453-1300
WWW
www.geopsi.com
support@geopsi.com Last Revised: 05272021