Professional Documents
Culture Documents
STA 13 x 27
Dimensions (mm) ∅ 13 x 27
Technical Data
Dielectric Strength 500 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 51 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force Flat Face: 5,25 N @20°C
60°: 4,00 N @20°C
Weight 24,7 g
Plunger Weight 4,54 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
Dimensions
28.6 R min
2.1
M10 x 0.75
3.86
Mounting nut shipped loose. 250 mm min.,
0.20 mm2
Performance
chart Flat face Plunger, Force Flat face Plunger, Speed
48 24
(13.34)
10% Duty Cycle 40W 100% Duty Cycle 4W
25% Duty Cycle 16W 50% Duty Cycle 8W
40 50% Duty Cycle 8W 20 25% Duty Cycle 16W
(11.12) 100% Duty Cycle 4W 10% Duty Cycle 40W
Force – oz. (newtons)
32 16
(8.90
Speed – ms
24 12
(6.67)
16 8
(4.45)
8 4
(2.22)
0 0.05 0.10 0.15 0.20 0.25 0 0.05 0.10 0.15 0.20 0.25
(1.27) (2.54) (3.81) (5.08) (6.35) (1.27) (2.54) (3.81) (5.08) (6.35)
Stroke – inches (mm) Stroke – inches (mm)
40
Speed – ms
16 30
(4.45)
20
8
(2.22)
10
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195222-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 13 x 27
Dimensions (mm) ∅ 13 x 27
Technical Data
Dielectric Strength 500 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 51 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force Flat Face: 4,45 N @20°C
60°: 3,16 N @20°C
Weight 25,2 g
Plunger Weight 3,12 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
1.59 ± 0.08
M10 x 0.75
3.86
Mounting nut shipped loose.
250 mm min.,
0.20 mm2
Performance
chart Flat face Plunger, Force Flat face Plunger, Speed
32 24
(8.90)
10% Duty Cycle 40W 100% Duty Cycle 4W
25% Duty Cycle 16W 50% Duty Cycle 8W
50% Duty Cycle 8W 20 25% Duty Cycle 16W
100% Duty Cycle 4W 10% Duty Cycle 40W
24
Force – oz. (newtons)
(6.67)
16
Speed – ms
16 12
(4.45)
8
8
(2.22)
4
0 0.05 0.10 0.15 0.20 0.25 0 0.05 0.10 0.15 0.20 0.25
(1.27) (2.54) (3.81) (5.08) (6.35) (1.27) (2.54) (3.81) (5.08) (6.35)
Stroke – inches (mm) Stroke – inches (mm)
40
Speed – ms
16 30
(4.45)
20
8
(2.22)
10
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195223-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 20 x 39
Dimensions (mm) ∅ 20 x 39
Life 25 M cycles
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 3” 1⁄8”
Coil Resistance ±5% tolerance
Holding Force Flat Face: 23,31 N @20°C
60°: 12,81 N @20°C
Weight 83,6 g
Plunger Weight 20,13 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
Dimensions
28.6 R min
2.6
M14 x 1.5
5.97
Mounting nut shipped loose.
250 mm min.,
0.20 mm2
Performance
Flat face Plunger, Force Flat face Plunger, Speed
chart
10 50
(44.48)
10% Duty Cycle 70W 100% Duty Cycle 7W
25% Duty Cycle 28W 50% Duty Cycle 14W
50% Duty Cycle 14W 25% Duty Cycle 28W
8 100% Duty Cycle 7W 40 10% Duty Cycle 70W
(35.58)
Force – lbs. (newtons)
Speed – ms
6 30
(26.69)
4 20
(17.79)
2 10
(8.90)
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
4
(17.79)
Speed – ms
30
3
(13.34)
20
2
(8.90)
10
1
(4.45)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
(2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195224-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 20 x 39
Dimensions (mm) ∅ 20 x 39
Life 25 M cycles
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 76 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force Flat Face: 22,02 N @20°C
60°: 12,68 N @20°C
Weight 87,3 g
Plunger Weight 15,03 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
2.39 ± 0.08
M14 x 1.5
5.97
Mounting nut shipped loose.
250 mm min.,
0.20 mm2
Performance
chart Flat face Plunger, Force Flat face Plunger, Speed
8 50
(35.58)
10% Duty Cycle 70W 100% Duty Cycle 7W
25% Duty Cycle 28W 50% Duty Cycle 14W
50% Duty Cycle 14W 25% Duty Cycle 28W
100% Duty Cycle 7W 40 10% Duty Cycle 70W
6
Force – lbs. (newtons)
(26.69)
Speed – ms
30
4
(17.79)
20
2
(8.90)
10
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
4
(17.79)
Speed – ms
30
3
(13.34)
20
2
(8.90)
1 10
(4.45)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
(2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195225-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 26 x 52
Dimensions (mm) ∅ 26 x 52
Life 25 M cycles
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
with solenoid mounted on the equivalent of an aluminium plate measuring 102 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force Flat Face: 61,52 N @20°C
60°: 29,40 N @20°C
Weight 197,3 g
Plunger Weight 45,36 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
Dimensions
28.58 R min
3.1 ± 0.30
M20 x 1.5
7.92
Mounting nut shipped loose.
250 mm min.,
0.20 mm2
Performance
chart Flat face Plunger, Force Flat face Plunger, Speed
28 50
(124.54)
10% Duty Cycle 100W 100% Duty Cycle 10W
24 25% Duty Cycle 40W 50% Duty Cycle 20W
50% Duty Cycle 20W 25% Duty Cycle 40W
(106.75) 100% Duty Cycle 10W 10% Duty Cycle 100W
40
Force – lbs. (newtons)
20
(88.96)
Speed – ms
30
16
(71.17)
12
(53.38) 20
8
(35.58)
10
4
(17.79)
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
8
(35.58)
Speed – ms
30
6
(26.69)
20
4
(17.79)
10
2
(8.90)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
(2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195226-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 26 x 52
Dimensions (mm) ∅ 26 x 52
Life 25 M cycles
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 102 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force Flat Face: 52,58 N @20°C
60°: 28,87 N @20°C
Weight 190.8 g
Plunger Weight 33,74 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
3.18 ± 0.08
M20 x 1.5
7.92
Mounting nut shipped loose.
250 mm min.,
0.20 mm2
Performance
chart Flat face Plunger, Force Flat face Plunger, Speed
28 50
(124.54)
10% Duty Cycle 100W 100% Duty Cycle 10W
24 25% Duty Cycle 40W 50% Duty Cycle 20W
50% Duty Cycle 20W 25% Duty Cycle 40W
(106.75) 100% Duty Cycle 10W 10% Duty Cycle 100W
40
Force – lbs. (newtons)
20
(88.96)
Speed – ms
30
16
(71.17)
12
(53.38) 20
8
(35.58)
10
4
(17.79)
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5
(2.54) (5.08) (7.62) (10.16) (12.70) (2.54) (5.08) (7.62) (10.16) (12.70)
Stroke – inches (mm) Stroke – inches (mm)
8
(35.58)
Speed – ms
30
6
(26.69)
20
4
(17.79)
10
2
(8.90)
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
(2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78) (2.54) (5.08) (7.62) (10.16) (12.70) (15.24) (17.78)
Stroke – inches (mm) Stroke – inches (mm)
Ordering Reference
Type 195227-(0) Plunger (XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 125 M
Dimensions (mm) ∅ 32 x 57
Operation Pull
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 127 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force 40,03 N @20°C
Weight 295 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
Dimensions
18.237 ± 0.381
1.473
16.662
42.062 31.75 ± 0.381
max 33.325
9.52
4.0 7.925 ± 0.381
Ø3.1
14.681 ± 0.381
Plunger stop
250 mm min.,
0.34 mm2
Performance
chart Force Speed
20.0 80
(89.0)
10% Duty Cycle 130 W
25% Duty Cycle 52 W 100% Duty Cycle 13 W
15.0 50% Duty Cycle 26 W 50% Duty Cycle 26 W
Force - lb (newtons)
60
(66.75) 100% Duty Cycle 13 W 25% Duty Cycle 52 W
10% Duty Cycle 130 W
Time - ms
10.0 40
(44.50)
5.0 20
(22.25)
0 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0 0.20 0.40 0.60 0.80 1.00
(2.5) (5.1) (7.6) (10.2) (12.7) (15.2) (17.8) (5.08) (10.16) (15.24) (20.32) (25.4)
Stroke - in (mm) Stroke - in (mm)
Ordering Reference
Type 282366-(0XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.
STA 150 M
Dimensions (mm) ∅ 38 x 63
Operation Pull
Technical Data
Dielectric Strength 1000 VRMS
Recommended Maximum watts dissipated by solenoid are based on an unrestricted flow of air at 20°C,
Minimum Heat Sink with solenoid mounted on the equivalent of an aluminium plate measuring 152 x 3,2 mm
Coil Resistance ±5% tolerance
Holding Force 64,50 N at 20°C
Weight 481,8 g
Preferred Range
Type Size Function Duty Cycle Max. Stroke Nominal voltage Force@Nominal Stroke Nominal power max. "On time"
Dimensions
21.412 ± 0.381
1.473
16.662
9.525
Ø3.1 4.0 7.925 ± 0.381
17.856 ± 0.381
Plunger stop
250 mm min.,
0.34 mm2
Performance
chart Force Speed
20.0 80
(89.0)
10% Duty Cycle 170W
25% Duty Cycle 68W 100% Duty Cycle 17W
15.0 50% Duty Cycle 34W 50% Duty Cycle 34W
Force - lb (newtons)
60
(66.75) 100% Duty Cycle 17W 25% Duty Cycle 68W
10% Duty Cycle 170W
Time - ms
10.0 40
(44.50)
5.0 20
(22.25)
0 0.10 0.20 0.30 0.40 0.50 0.60 0.70 0 0.20 0.40 0.60 0.80 1.00
(2.5) (5.1) (7.6) (10.2) (12.7) (15.2) (17.8) (5.08) (10.16) (15.24) (20.32) (25.4)
Stroke - in (mm) Stroke - in (mm)
Ordering Reference
Type 282367-(0XX) Coil Data awg (wire diameter)
All data is at 20°C coil temperature. Force outputs degrade with increased temperatures.