Connect a guitar and pickup phase tester with a mono cable. Tap a known pickup or the unknown pickup to determine its phase indication. Match the phases of the guitar and new pickup by soldering its wires accordingly based on the phase shown in the tester.
Connect a guitar and pickup phase tester with a mono cable. Tap a known pickup or the unknown pickup to determine its phase indication. Match the phases of the guitar and new pickup by soldering its wires accordingly based on the phase shown in the tester.
Connect a guitar and pickup phase tester with a mono cable. Tap a known pickup or the unknown pickup to determine its phase indication. Match the phases of the guitar and new pickup by soldering its wires accordingly based on the phase shown in the tester.
Identifying the phase of a guitar pickups and the phase of an
unknown pickup using the N-audio guitar pickup phase tester
Њ Connect the guitar and the pickup phase tester via a guitar MONO cable. Increase Ќ Connect a guitar MONO cable to the tester. Connect one wire of an unknown pickup to the volume and the tone and tap to one of the the ground and the other one to the Tip. Tap to pickups with a cutter blade to see the phase. see the current phase. Match the phases of the guitar and the new pickup by soldering the wires based on the right phase.
Tap to see Tap to see
the phase the phase
A guitar with normal A guitar with reversed
phase pickups phase pickups Output Output Red Black Black Normal Red Reversed phase phase