Professional Documents
Culture Documents
Experiment 7 Timer and Dimmer
Experiment 7 Timer and Dimmer
7
Timer and Dimmer
Objectives:
Understand how a dimmer and timer controllers works
Determine the limits of use of the sensor.
Exploiting measures.
PART1: Dimmer
1. How does a dimmer circuit work?
2. Can an incandescent lamp dimmer be used to control a fluorescent lamp load? Explain:
Equipment
Dimmer switch 1 Unit
Miniature Circuit Breaker (MCB), single phase 6A 1 Unit
Earth Leakage Circuit Breaker (ELCB), single phase IΔn 30mA 1 Unit
Halogen Lamp with Fitting, 35 Watt 1 Unit
Multimeter
Screwdrivers
Cutter
Experiment Manual
Observe the dimmer and answer the question below:
3.What is the voltage rating of the dimmer?
5. Install halogen lamp on bracket and make circuit connection as shown in Figure below.
1 Exp. 4
Figure 13. Dimming Halogen Lamp Wiring Connection
6.Ensure the circuit is correct and get approval from your Instructor to continue this experiment.
7.Turn ON ELCB, MCB and dimmer switch then observe the halogen
8.Set dimmer knob to multi-position and observe halogen lamp, record the data into table
9.Turn OFF dimmer switch, MCB and ELCB then do next experiment.
10. Draw the connection diagram of your system
2 Exp. 4
PART 2: Timer
EQUIPMENT
Timer
Circuit breaker
Push buttons
Lamp
Time switch
A) Timer installation
5 Exp. 4