TITANIUM RECHARGEABLE LITHIUM BATTERIES (MT SERIES] 3
ece
TITANIUM RECHARGEABLE LITHIUM BATTERIES (MT SERIES) -
COIN TYPE RECHARGEABLE LITHIUM BATTERIES
These coin type Manganese Titanium Rechargeable Lithium coin batteries use a Lithium-
Manganese complex oxide for the positive pole and a special Lithium-Titanium complex
oxide for the negative pole. They provide a capacity which is more than 10 times that of
capacitors of the same size
FEATURES APPLICATIONS
® Rechargeable Lithium technology Main power supplies in
® Superior long-term reliability
Years of experience in production rechargeable w
(#500 charge-sischarge cycles up to 1V or discharge Memory back-u power susply
limit voltage at 1005 depth of discharge] for pagers, timers, ete
Model number Electrical characterises 2t20°¢ Dimensions wth tube (rm) lec
Neminat Nominal Diameter Total height
vatage apa)
wes is ve a 1% we -
rsa 1s 2s us 2 ea -
r920 1s so 1s 20 ts -3° TITANIUM RECHARGEABLE LITHIUM BATTERIES [MT SERIES]
CHARGING MT-621
MT-920
Charging circuits
Charging discharging yee depth te nominal
Charging system" ty nar tecpeciod
same type
The charging circuit is crucial in terms of ensuring that full
justice will be done to the battery characteristics, Consider
carefully as the wrong charging circuit can cause trouble.
Precautions regarding the charge voltage setting
Under no circumstances should constant current charging
‘which is used for Nickel-Cadmium batteries, be used. Ignoring
rise te about
this precaution will cause the battery voltag:
5V, resulting in a deterioration of performance,
we E
Charge voltage range
If a fixed-charging method is applied, please adhere to the
specified charging voltage, Guaranteed voltage is 1.8V to 2.8V
at the temperature of -10°C to +60°C.
@ If the charging voltage exceeds the specifications, the
internal resistance of the ba!
ry will rise and may cause
battery deterioration. Also, with a charge voltage around
3V, corrosion of the @ terminal [case] may occur, causing
leakage,
4 It is not possible for the battery capacity to recover com-
pletely when the charging voltage is below the specification,
Recommended charging circuits - basic conditions
Fixed-voltage charge
1.8 to 2.6V [Standard voltage: 2.2V1
For a battery voltage of 2.3V
Charge voltage:
Charge current
MT-516 Approx. 0.6mA or below
Influence of the charge voltage on MT batter
It the charge voltage goes beyond
Approx. 0.5mA or below
Approx. 1,0mA or below
Mixed usage of batteries
% Do not use these batteries and Lithium primary batteries or
other rechargeable batteries together, and do nol use new
batteries and old batteries together even if they are of the
Ss $
its adequate range, battery
performance may deteriorate early. Be sure to observe the
guaranteed charge voltage,TITANIUM
MT-516
DIMENSIONS (MM)
MT-621
ECHARGEABLE LITHIUM BATTE!
(MT SERIES] 3
42 €
Nerina ata Nemiavatane :
Nerina cpt i " Nona ay ma 2s
Dame ss lat am ia
Te u Twat) 4
Dlcarpstergerstrernp Pe | “1002 Dice tmpeature rage) | 1
ist oa ita 7
DISCHARGE CHARACTERISTICS DISCHARGE CHARACTERISTICS
eu su
iy ze Bis
scare cpa nah
CONSUMPTION CURRENT VS, DURATION TIME
The data in thie dacument are for descriptive purposes ont and reno intended to make or imply any uarante or waranty 78
Discharge capacty th
CONSUMPTION CURRENT VS. DURATION TIME
Coneumption ant3. TITANIUM RECHARGEABLE LITHIUM BATTERIES [MT SERIES)
MT-920
DIMENSIONS (MM)
Nodal number
‘Nominal voltage V1 1s
‘Nominal capaity (mAh) so
Diameter mm) os
Total height nm 2
Discharging temperature range("C) 0% 60
Weiss) oa
DISCHARGE CHARACTERISTICS
‘share capacity th
CONSUMPTION CURRENT VS, DURATION TIME
Ceneurpon ret i
DISCHARGE TEMPERATURE CHARACTERISTICS
=e
Bis
a
Decare canny ina
76 The aati this document are for descriptive purposes any and are nctintended to make or imply any guarantee or warranty