Professional Documents
Culture Documents
i. Cover Page
BS EN 62479:2010
Assessment of the compliance of low power electronic & electrical equipment with
the basic restrictions related to human exposure to electromagnetic fields
(10 MHz to 300 GHz)
NOTICE: “This test report relates only to the items tested and must not be used by the client to claim product
endorsement by NVLAP or any agency of the U.S. Government”. Please see the "Description of Test Sample" page listed
inside of this report.
COPYRIGHT NOTICE
This report must not be reproduced (except in full), without the approval of D.L.S. Electronic Systems, Inc.
SIGNATURE PAGE
Tested By:
Paul Leo
Senior Test Engineer
Reviewed By:
William Stumpf
OATS Manager
Approved By:
Brian Mattson
General Manager
Table of Contents
i. Cover Page ..............................................................................................................................................1
ii. Signature Page .........................................................................................................................................2
iii. Table of Contents ....................................................................................................................................3
iv. NVLAP Certificate of Accreditation .......................................................................................................4
1.0 Summary of Test Report ..................................................................................................................5
2.0 Introduction ......................................................................................................................................5
3.0 Test Facilities ...................................................................................................................................6
4.0 Description of Test Sample..............................................................................................................6
5.0 Test Equipment ................................................................................................................................7
6.0 Test Arrangements ...........................................................................................................................8
7.0 Test Conditions ................................................................................................................................8
8.0 Modifications Made To EUT For Compliance ................................................................................8
9.0 Additional Descriptions ...................................................................................................................9
10.0 Results ..............................................................................................................................................9
11.0 Conclusion .......................................................................................................................................9
Appendix A – Test Photos .........................................................................................................................10
Appendix B – Measurement Data ..............................................................................................................21
B1.0 Conducted RF Output Power .................................................................................................... 21
B2.0 Power Spectral Density............................................................................................................. 23
B3.0 Transmitter Unwanted Emissions in the Out-Of-Band Domain ............................................... 24
_Aveslink Antenna, -40° C ............................................................................................................... 25
_Aveslink Antenna, +25° C .............................................................................................................. 29
_Aveslink Antenna, +85° C .............................................................................................................. 33
_LSR Antenna, -40° C ...................................................................................................................... 37
_LSR Antenna, +25° C ..................................................................................................................... 41
_LSR Antenna, +85° C ..................................................................................................................... 45
B4.0 Receiver Spurious Emissions – Radiated ................................................................................. 49
Appendix C – RF Exposure .......................................................................................................................50
C1.0 BS EN 62479:2010 Assessment ............................................................................................... 50
Appendix D – Informative .........................................................................................................................53
D1.0 EN 300 328 V1.9.1 Clause 5.3.1 .............................................................................................. 53
Appendix E – Measurement Uncertainty...................................................................................................58
It was determined that the California Eastern Laboratories MeshConnect ZICM357SP0-1C Zigbee
Module, Model ZICM357SP0-1 with Aveslink 2dBi external antenna or with LSR 2dBi external
antenna, complies with the requirements of ETSI EN 300 328 V1.9.1.
Informative:
Description Compliant?
2.0 Introduction
Power Source:
3.34 VDC (Lab DC bench power supply used for testing)
Internal Frequencies:
24 MHz
A list of the equipment used can be found in the table below. All primary equipment was
calibrated against known reference standards with a verified traceable path to NIST.
Unless otherwise noted, the bandwidth of the measuring receiver / analyzer used during testing is
shown below.
The EUT was powered through a serial interface cable that was connected to the bench
supply set to 3.34 VDC.
EUT was set to transmit continuously at its maximum power, with a modulating signal
representative of the worst-case signal encountered in a real system operation on the low,
middle, and high channels of the operating band.
10.0 Results
Measurements were performed in accordance with CISPR 16 and ETSI EN 300 328.
Graphical and tabular data can be found in Appendix B of this report.
Informative data can be found in Appendix D. This section of the report includes the
EN 300 328 V1.9.1 Clause 5.3.1 material.
11.0 Conclusion
Appendix A
Appendix A
Radiated Emissions Below 1 GHz – Back
Appendix A
Appendix A
Radiated Emissions Above 1 GHz – Back
Appendix A
Appendix A
Appendix A
Appendix A
Appendix A
Appendix A
Rule Part:
EN 300-328 Section 4.3.2.2
Mean Equivalent Isotropic Radiated Power (e.i.r.p.) during Transmission
Test Procedure:
EN 300 328 Section 5.3.2.2.1 –Conducted Measurement
Limit:
The maximum RF output power shall not exceed 20dbm (e.i.r.p.)
Results:
Compliant
Maximum e.i.r.p. measured 10.1dbm
Comment:
The manufacturer is adding two antennas to the ZICM357SP0-1. The data reported is taken from
page 11 of the original LS Research, LLC test report #314114 A for the ZICM357SP0-1 and
adjusted for the stated antenna gain of 2dBi for the Aveslink E2820-CA Flying Lead External
Dipole Antenna and 2dBi for the LSR 001-0010 External Dipole Antenna.
Conducted Measurement
Measured
Stated Output
Conducted Output
Channel Antenna Power Limit Margin
Temp (°C) Output Power
(MHz) Gain EIRP (dbm) (db)
Power (mW)
(dbi) (dbm)
(dbm)
Appendix B
Rule Part:
EN 300-328 Section 4.3.2.3
Mean Equivalent Isotropic Radiated Power (e.i.r.p.) during a transmission burst
Test Procedure:
EN 300-328 Section 5.3.3.2.1 – Conducted Measurement
Limit:
The maximum Power Spectral Density is limited to 10dbm/MHz (e.i.r.p.)
Results:
Compliant
Maximum Power Spectral Density e.i.r.p. measured 6.9dbm/MHz.
Comment:
The manufacturer is adding two antennas to the ZICM357SP0-1. The data reported is taken from
page 14 of the original LS Research, LLC test report #314114 A for the ZICM357SP0-1 and
adjusted for the stated antenna gain of 2dBi for the Aveslink E2820-CA Flying Lead External
Dipole Antenna and 2dBi for the LSR 001-0010 External Dipole Antenna.
Measured Stated
PSD
Channel Conducted Antenna Limit Margin
Temp (°C) EIRP
(MHz) PSD Gain (dbm/MHz) (db)
(dbm/MHz)
(dbm/MHz) (dbi)
2405.0 4.0 2.0 6.0 10.0 4.0
22.2 2440.0 4.3 2.0 6.3 10.0 3.7
2480.0 4.9 2.0 6.9 10.0 3.1
Appendix B
Rule Part:
EN 300-328 Section 4.3.2.8
Test Procedure:
EN 300-328 Section 5.3.9.2.1 – Conducted Measurement
Limit:
EN 300-328 Section 4.3.2.8.3 – e.i.r.p. limits
Figure 3: Transmit Mask - dbm/MHz (e.i.r.p.)
Results:
Compliant
Comment:
Testing was performed in extreme environmental conditions. The spectrum analyzer
measurements were corrected to account for the cable loss, external attenuator, and antenna gain.
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Extreme
Temperature: -40 °C
Relative Humidity: 43 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 with Aveslink E-2820-CA Flying Lead External Dipole
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Comments: Extreme Low Temperature -40 C
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density N ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth N ---
Adaptivity N ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 2.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 8 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Normal
Temperature: 25 °C
Relative Humidity: 47 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 with Aveslink E-2820-CA Flying Lead External Dipole
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density Y ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth Y ---
Adaptivity Y ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2397.18 2397.5 2398 2398.5 2399 2399.5 2400 2483.5 2484 2484.5 2485 2485.5 2486 2486.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2397.18 2397.5 2398 2398.5 2399 2399.5 2400 2483.5 2484 2484.5 2485 2485.5 2486 2486.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 1.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 10 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Extreme
Temperature: 85 °C
Relative Humidity: 46 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 with Aveslink E-2820-CA Flying Lead External Dipole
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Comments: Extreme Temperature High 85 C
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density N ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth N ---
Adaptivity N ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 2.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 8 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Extreme
Temperature: -40 °C
Relative Humidity: 43 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 LSR 001-0100 External Dipole Antenna
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Commnent: Extreme Low Temperature -40 C
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density N ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth N ---
Adaptivity N ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 2.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 8 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Normal
Temperature: 25 °C
Relative Humidity: 48 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 LSR 001-0100 External Dipole Antenna
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density Y ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth Y ---
Adaptivity Y ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 2.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 10 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Measurement Equipment
Switch Unit with OSP-B157: Rohde&Schwarz, OSP120, 101295, Var02, 2.51
OSP-B157 Power Meter: ---
Spectrum Analyzer: Rohde&Schwarz,FSV-44,1307.9002K07/123456,1.60
Signal Generator: ---
Vector Signal Generator: ---
EMC32 Version: 9.26.00 / 1.26.01
Common Information
Environmental Conditions: Extreme
Temperature: 85 °C
Relative Humidity: 46 %
Nominal Voltage: 3.34 V
Operator: Paul L
EUT Information
EUT Name: ZICM357P0-1 LSR 001-0100 External Dipole Antenna
Manufacturer: California Eastern Laboratories
DLS Project Number: 8263
Antenna Gain (dBi) 2
Power Setting: 8
Modulation Type: GFSK
Data Rate: Continuous Transmit
Commnent: Extreme High Temperature 85 C
Summary
Test Parameter Testplan Test
(Yes/No) Result
RF output power Y ---
Duty Cycle N ---
Tx-sequence N ---
Tx-gap N ---
Medium Utilisation (MU) factor N ---
Power Spectral Density N ---
Accumulated Transmit Time N ---
Frequency Occupation N ---
Hopping Sequence N ---
Hopping Frequency Separation N ---
Occupied Channel Bandwidth N ---
Adaptivity N ---
Transmitter unwanted emissions in the out-of-band domain Y PASS
Transmitter unwanted emissions in the spurious domain Y ---
Receiver spurious emissions Y ---
Frequencies
Frequency Power DC MU PSD Acc. Frq. Hopping. HFS OBW OOB
TT Occ. Seq.
Lowest 2405 MHz xP
Highest 2480 MHz xP
Adapt Tx Rx
sp. sp.
Lowest
Highest
Low Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
High Frequency
0 0
-5 -5
-10 -10
-15 -15
-20 -20
-25 -25
-30 -30
-35 -35
Level in dBm
Level in dBm
-40 -40
-45 -45
-50 -50
-55 -55
-60 -60
-65 -65
2395.18 2396 2397 2398 2399 2400 2483.5 2484 2485 2486 2487 2488.32
Settings
Setting Value
Modulation other
Adaptive Yes
Number Of Transmission Chains 1
Antenna Gain Port 1 2 dBi
Beamforming Gain 0 dB
Nominal Channel Bandwidth 2.41 MHz
Maximum EIRP 20 dBm
Nominal EIRP 8 dBm
Attenuation / Pathloss File Port 1 CBL-092 & 10dB-566
Spurious Tx Receiver reference level
12 dB
below power
power measurement for radiated No
DUT Port Occupied Channel Bandwidth 1
LBT Based Yes
Short Signaling Yes
Frame Based No
Load Based Yes
Adaptivity q Factor 32
CCA 20 us
DUT Port Adaptivity 1
Channel Occupation Time 13 ms
Medical Device reverse compatibility mode No
Expanded Combined Uncertainty of
0 dB
Absolute Level Measurement
HW timing error 0 ms
Expanded Uncertainty for
0 kHz
Occupied Bandwidth (OBW)
Expanded Uncertainty for
0 dB
Power Spectral Density (PSD)
Appendix B
Rule Part:
EN 300-328 Section 4.3.2.10
Test Procedure:
EN 300-328 Section 5.3.11.2.2 – Radiated Measurement
Annex C- Measurements in an Open Area Test Site (30MHz-1000MHz) and
Fully Anechoic Room (1-12.75GHz) using substitution method.
1GHz-12.75GHz
1MHz RBW
3MHz VBW
Peak Detector
Limit:
EN 300-328 Section 4.3.2.10.3 Table 5
Results:
Compliant
Comment:
Measurements were performed with the EUT in continuous receive mode. The EUT was tested
on low, mid, and high channels of operation and in three orthogonal planes.
Testing was performed in normal environmental conditions.
Appendix C – RF Exposure
BS EN 62479:2010
Transmitter Information:
Antenna Type: Aveslink E2820-CA Flying Lead External Dipole Antenna and
LSR 001-0010 External Dipole Antenna.
Exposure Limit:
Maximum Permissible Exposure (MPE) limit for General Population / Uncontrolled Exposure in
the frequency range 2000 – 5000 MHz (ref: IEEE C95.1-2005, Table 9)
MPE Calculation:
𝑃𝑃𝑃𝑃
𝑆𝑆 =
4𝜋𝜋𝑅𝑅2
S = Power Density (mW/cm 2)
P = Power Input to the antenna (mW)
G = Numeric Power Gain of the antenna
R = Distance to the center of the radiation of the antenna (cm)
Results:
RF Exposure Calculation
Input
Frequency = 2480 MHz
P= 8.1 dBm
G= 2 dBi
R= 20 cm
π 3.14159
Power
Transmit Output Output Antenna Antenna Power
Distance Density
Frequency Power Power Gain Gain Density Margin
(cm) Limit
(MHz) (dBm) (mW) (dBi) (numeric) (mW/cm²)
(mW/cm²)
Summary of Results:
This is a mobile device with a minimum separation distance of 20 cm. With a minimum
separation distance of 20 centimeters, the California Eastern Laboratories MeshConnect
ZICM357SP0-1C Zigbee Module, Model ZICM357SP0-1 meets the RF exposure evaluation
requirements for maximum permissible exposure to any radiating structure and the general
population / uncontrolled exposure.
Conclusion:
......................................................................................................................................................
......................................................................................................................................................
......................................................................................................................................................
• Transmitter unwanted emissions in the OOB domain .......... Continuous carrier - modulated
• Transmitter unwanted emissions in the spurious domain ....... Continuous carrier - modulated
____Equipment with two diversity antennas but only one antenna active at any moment in time
____Smart Antenna Systems with two or more antennas, but operating in a (legacy) mode where only one
antenna is used. (e.g. IEEE 802.11™ [i.3] legacy mode in smart antenna systems)
____Operating mode 2: Smart Antenna Systems - Multiple Antennas without beam forming
____Single spatial stream / Standard throughput / (e.g. IEEE 802.11™ [i.3] legacy mode)
____Operating mode 3: Smart Antenna Systems - Multiple Antennas with beam forming
Single spatial stream / Standard throughput (e.g. IEEE 802.11™ [i.3] legacy mode)
In case of beam forming, the maximum (additional) beam forming gain: ........... dB
NOTE: The additional beam forming gain does not include the basic gain of a single antenna.
__X_ Stand-alone
____Combined Equipment (Equipment where the radio part is fully integrated within another type of
equipment)
NOTE 1: Add more lines in case the equipment has more power levels.
NOTE 2: These power levels are conducted power levels (at antenna connector).
•For each of the Power Levels, provide the intended antenna assemblies, their corresponding gains (G) and the resulting
e.i.r.p. levels also taking into account the beamforming gain (Y) if applicable
NOTE: Add more rows in case more antenna assemblies are supported for this power level.
NOTE: Add more rows in case more antenna assemblies are supported for this power level.
NOTE: Add more rows in case more antenna assemblies are supported for this power level.
n) The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined (host)
equipment or test jig in case of plug-in devices:
____test jig
p) The equipment type (e.g. Bluetooth®, IEEE 802.11™ [i.3], IEEE 802.15.4™ [i.4], proprietary, etc.):
__X__No
Compliance with the limits in this standard are based on the results of the compliance measurement. Our
calculated measurement uncertainty including the measurement instrumentation, associated connections
between the various instruments in the measurement chain, and other contributions, are provided in this
section of the test report.
Uncertainty Uncertainty
Parameter (Standard) (Test)
Occupied Channel Bandwidth +/-5% +/-2.83%
RF Output Power, Conducted +/-1.5dB +/-0.892dB
Power Spectral Density, Conducted +/-3dB +/-1.261dB
Unwanted Emissions, Conducted +/-3dB +/-2.623dB
All Emissions, Radiated +/-6dB +/-3.434dB
DC and Low Frequency Voltages +/-3% +/-2.75%
Time +/-5% +/-0.01%
Duty Cycle +/-5% +/-0.05%
END OF REPORT