Professional Documents
Culture Documents
Test report
ETSI EN 300 328 v 2.1.1 (2016-11): Wideband transmission
systems; Data transmission equipment operating in the 2,4 GHz
ISM band and using wide band modulation techniques;
Harmonised Standard covering the essential requirements of
article 3.2 of Directive 2014/53/EU
Trademark Ultimaker
Manufacturer ULTIMAKER BV
Stationsplein 32 3511ED UTRECHT
Test method requested, standard ETSI EN 300 328 v2.1.1 (2016-11): Wideband
transmission systems; Data transmission equipment
operating in the 2,4 GHz ISM band and using wide band
modulation techniques
Summary IN COMPLIANCE
Index
Competences and guarantees .................................................................................................... 3
General conditions ...................................................................................................................... 3
Uncertainty ................................................................................................................................. 3
Data provided by the client.......................................................................................................... 4
Usage of samples ....................................................................................................................... 4
Test sample description .............................................................................................................. 5
Identification of the client............................................................................................................. 6
Testing period and place ............................................................................................................. 6
Document history ........................................................................................................................ 6
Modifications to the reference test report .................................................................................... 7
Environmental conditions ............................................................................................................ 7
Remarks and comments ............................................................................................................. 8
Testing verdicts........................................................................................................................... 9
Summary .................................................................................................................................... 9
List of Equipment’s.................................................................................................................... 10
Appendix A: .............................................................................................................................. 11
Appendix B: Test results ........................................................................................................... 18
Appendix C: Photographs ......................................................................................................... 92
General conditions
1. This report is only referred to the item that has undergone the test.
2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies
or competent Authorities.
3. This document is only valid if complete; no partial reproduction can be made without previous written
permission of DEKRA Certification Inc.
4. This test report cannot be used partially or in full for publicity and/or promotional purposes without
previous written permission of DEKRA Certification Inc. and the Accreditation Bodies.
Uncertainty
Uncertainty (factor k=2) was calculated according to the DEKRA Certification internal document PODT000.
Usage of samples
Samples undergoing test have been selected by: The client.
Sample S/01 is composed of the following elements:
Date of
Control Nº Description Model Serial Nº
reception
2498/01 S3 3D Printer Body S3 S3-R1-00 06/26/2019
Date of
Control Nº Description Model Serial Nº
reception
2498/01 S3 3D Printer Body S3 S3-R1-00 06/26/2019
Date of
Control Nº Description Model Serial Nº
reception
2498/02 Fan IndustrialPPC --- 06/26/2019
LAN >3
USB <3
AC:
DC:
DC:
Rated Power ............................... : "90-264 Vac 47 ~ 63 Hz, 4,85 A O/P 24 Vdc, 21 A, 500 W max."
3D-Printer S3 UM
Air Manager Air Manager UM
Accessories (not part of the test Description Type Manufacturer
item) ............................................ :
Data Not Provided
Document history
This modification test report cancels and replaces the test report 2498ERM.005.
Environmental conditions
In the control chamber, the following limits were not exceeded during the test:
Min. = 15 ºC
Temperature
Max. = 35 ºC
Min. = 30 %
Relative humidity
Max. = 75 %
Min. = 860 mbar
Air pressure
Max. = 1060 mbar
In the semi anechoic chamber, the following limits were not exceeded during the test.
Min. = 15 ºC
Temperature
Max. = 35 ºC
Min. = 30 %
Relative humidity
Max. = 75 %
Min. = 860 mbar
Air pressure
Max. = 1060 mbar
In the chamber for conducted measurements, the following limits were not exceeded during the test:
Temperature Min. = 15 ºC
Max. = 35 ºC
Relative humidity Min. = 30 %
Max. = 60 %
Air pressure Min. = 860 mbar
Max. = 1060 mbar
Testing verdicts
Pass : P
Fail : F
Summary
List of Equipment’s
Conducted Measurements
Radiated Measurements
Appendix A:
Application form for testing
FHSS
non-adaptive Equipment
The equipment can switch dynamically between Frame Based and Load Based equipment
Equipment with dynamic behaviour, that behaviour is described here. (e.g. the different combinations of duty cycle and
corresponding power levels to be declared):
......................................................................................................................................................
f) The worst case operational mode for each of the following tests:
RF Output Power
.........................N/A................................................................
Accumulated Transmit time, Frequency Occupation & Hopping Sequence (only for FHSS equipment)
...................N/A......................................................................
..................N/A.......................................................................
Medium Utilization
.................N/A........................................................................
..................... 802.11n(HT20)...........................
............... 802.11b.......................................
Equipment with two diversity antennas but only one antenna active at any moment in time
Smart Antenna Systems with two or more antennas, but operating in a (legacy) mode where only one antenna
is used. (e.g. IEEE 802.11™ [i.3] legacy mode in smart antenna systems)
Operating mode 2: Smart Antenna Systems - Multiple Antennas without beam forming
Single spatial stream / Standard throughput / (e.g. IEEE 802.11™[i.3] legacy mode)
Operating mode 3: Smart Antenna Systems - Multiple Antennas with beam forming
Single spatial stream / Standard throughput (e.g. IEEE 802.11™ [i.3] legacy mode)
In case of beam forming, the maximum (additional) beam forming gain: .....N/A...... dB
NOTE: The additional beam forming gain does not include the basic gain of a single antenna.
Stand-alone
Combined Equipment (Equipment where the radio part is fully integrated within another type of equipment)
Other ..................................................................................
l) The normal and the extreme operating conditions that apply to the equipment:
Operating temperature: …… ° C
test jig
m) The intended combination(s) of the radio equipment power settings and one or more antenna assemblies and their
corresponding e.i.r.p levels:
Antenna Type:
Integral Antenna
NOTE 1: Add more lines in case the equipment has more power levels.
NOTE 2: These power levels are conducted power levels (at antenna connector).
For each of the Power Levels, provide the intended antenna assemblies, their corresponding gains (G) and the
resulting e.i.r.p. levels also taking into account the beamforming gain (Y) if applicable
e.i.r.p.
Assembly # Gain (dBi) Part number or model name
(dBm)
1 2.8 19.92 NA
2
3
4
NOTE 3: Add more rows in case more antenna assemblies are supported for this power level.
e.i.r.p.
Assembly # Gain (dBi) Part number or model name
(dBm)
1
2
3
4
NOTE 4: Add more rows in case more antenna assemblies are supported for this power level.
e.i.r.p.
Assembly # Gain (dBi) Part number or model name
(dBm)
1
2
3
4
NOTE 5: Add more rows in case more antenna assemblies are supported for this power level.
n) The nominal voltages of the stand-alone radio equipment or the nominal voltages of the combined (host) equipment
or test jig in case of plug-in devices:
test jig
Battery
Other: ...................
..... Controlling software (72-Y5313-1_QRCT_CONN) has been activated to set the EUT on specific channel and power
level
.....................................
................................................................................................................................................ ......
p) The equipment type (e.g. Bluetooth®, IEEE 802.11™[i.3], IEEE 802.15.4™[i.4], proprietary, etc.):
Yes
The geographical location determined by the equipment as defined in clause 4.3.1.13.2 or clause 4.3.2.12.2 is not
accessible to the user.
No
t) Describe the minimum performance criteria that apply to the equipment (see clause 4.3.1.12.3 or clause 4.3.2.11.3):
......................................................................................................................................................
......................................................................................................................................................
......................................................................................................................................................
Appendix B Content
PRODUCT INFORMATION ...................................................................................................... 20
DESCRIPTION OF TEST CONDITIONS .................................................................................. 21
TEST 4.3.2.2: TRANSMITTER. RF OUTPUT POWER. ............................................................ 22
TEST 4.3.2.3: TRANSMITTER. POWER SPECTRAL DENSITY. ............................................. 25
TEST 4.3.2.6: ADAPTIVITY ...................................................................................................... 34
TEST 4.3.2.7: OCCUPIED CHANNEL BANDWIDTH. ............................................................... 39
TEST 4.3.2.8: TRANSMITTER UNWANTED EMISSIONS IN THE OUT-OF-BAND (OOB)
DOMAIN. .................................................................................................................................. 48
TEST 4.3.2.9: TRANSMITTER UNWANTED EMISSIONS IN THE SPURIOUS DOMAIN
(RADIATED) ............................................................................................................................. 61
TEST 4.3.2.10: RECEIVER SPURIOUS EMISSIONS (RADIATED) ......................................... 79
TEST 4.3.2.11: RECEIVER BLOCKING ................................................................................... 89
PRODUCT INFORMATION
The following information is provided by the supplier, in accordance with clause 5.4.1:
Information Description
Modulation DSSS/OFDM
Operation mode 1: Single Antenna Equipment Equipment with only one antenna
Nominal Voltage
Geo-location capability No
TEST DESCRIPTION
CONDITIONS
Power supply (V):
230 V AC
Test Frequencies for Conducted/ Radiated tests:
TC#01
Lowest channel: 2412 MHz
(b mode)
Middle Channel: 2442 MHz
Highest channel: 2472 MHz
LIMITS
For adaptive equipment using wide band modulations other than FHSS, the maximum RF output power shall
be 20 dBm.
The maximum RF output power for non-adaptive equipment shall be declared by the supplier and shall not exceed
20 dBm. For non-adaptive equipment using wide band modulations other than FHSS, the maximum RF output
power shall be equal to or less than the value declared by the manufacturer.
This limit shall apply for any combination of power level and intended antenna assembly.
TEST SETUP:
Type of equipment: Adaptive Equipment without the possibility to switch to a Non-adaptive mode.
Tmax Vn 18 18.2 18
Type of equipment: Adaptive Equipment without the possibility to switch to a Non-adaptive mode.
Antenna assembly declared gain (dBi) = 2.8 dBi.
Type of equipment: Adaptive Equipment without the possibility to switch to a Non-adaptive mode.
Type of equipment: Adaptive Equipment without the possibility to switch to a Non-adaptive mode.
Antenna assembly declared gain (dBi) = 2.8 dBi.
LIMITS
For equipment using wide band modulations other than FHSS, the maximum Power Spectral Density is limited to
10 dBm per MHz
TEST SETUP:
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
Channel Low
Channel Middle
Channel High
Measurement
Setting Instrument Instrument Instrument
Value Value Value
Start Frequency 2.40000 GHz 2.40000 GHz 2.40000 GHz
Stop Frequency 2.48350 GHz 2.48350 GHz 2.48350 GHz
Span 83.500 MHz 83.500 MHz 83.500 MHz
RBW 10.000 kHz 10.000 kHz 10.000 kHz
VBW 30.000 kHz 30.000 kHz 30.000 kHz
SweepPoints 8351 8351 8351
Sweeptime 20.000 s 20.000 s 20.000 s
Reference Level 20.000 dBm 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB 40.000 dB
Detector RMS RMS RMS
SweepCount 2 2 2
Filter 3 dB 3 dB 3 dB
Trace Mode Max Hold Max Hold Max Hold
Sweeptype Sweep Sweep Sweep
Preamp off off off
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
Channel Low
Channel Middle
Channel High
Measurement
Setting Instrument Instrument Instrument
Value Value Value
Start Frequency 2.40000 GHz 2.40000 GHz 2.40000 GHz
Stop Frequency 2.48350 GHz 2.48350 GHz 2.48350 GHz
Span 83.500 MHz 83.500 MHz 83.500 MHz
RBW 10.000 kHz 10.000 kHz 10.000 kHz
VBW 30.000 kHz 30.000 kHz 30.000 kHz
SweepPoints 8351 8351 8351
Sweeptime 168.000 s 168.000 s 168.000 s
Reference Level 20.000 dBm 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB 40.000 dB
Detector RMS RMS RMS
SweepCount 2 2 2
Filter 3 dB 3 dB 3 dB
Trace Mode Max Hold Max Hold Max Hold
Sweeptype Sweep Sweep Sweep
Preamp off off off
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
Bandwidth: 20 MHz
Channel Low
Channel Middle
Channel High
Measurement
Setting Instrument Instrument Instrument
Value Value Value
Start Frequency 2.40000 GHz 2.40000 GHz 2.40000 GHz
Stop Frequency 2.48350 GHz 2.48350 GHz 2.48350 GHz
Span 83.500 MHz 83.500 MHz 83.500 MHz
RBW 10.000 kHz 10.000 kHz 10.000 kHz
VBW 30.000 kHz 30.000 kHz 30.000 kHz
SweepPoints 8351 8351 8351
Sweeptime 168.000 s 168.000 s 168.000 s
Reference Level 20.000 dBm 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB 40.000 dB
Detector RMS RMS RMS
SweepCount 2 2 2
Filter 3 dB 3 dB 3 dB
Trace Mode Max Hold Max Hold Max Hold
Sweeptype Sweep Sweep Sweep
Preamp off off off
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
Bandwidth: 20 MHz
Channel Low
Channel Middle
Channel High
Measurement
Setting Instrument Instrument Instrument
Value Value Value
Start Frequency 2.40000 GHz 2.40000 GHz 2.40000 GHz
Stop Frequency 2.48350 GHz 2.48350 GHz 2.48350 GHz
Span 83.500 MHz 83.500 MHz 83.500 MHz
RBW 10.000 kHz 10.000 kHz 10.000 kHz
VBW 30.000 kHz 30.000 kHz 30.000 kHz
SweepPoints 8351 8351 8351
Sweeptime 168.000 s 168.000 s 168.000 s
Reference Level 20.000 dBm 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB 40.000 dB
Detector RMS RMS RMS
SweepCount 2 2 2
Filter 3 dB 3 dB 3 dB
Trace Mode Max Hold Max Hold Max Hold
Sweeptype Sweep Sweep Sweep
Preamp off off off
TEST SETUP(Cont.):
Reaction on Interferer
Reaction on Blocker
TEST RESULTS(Cont.)
TEST RESULTS(Cont.)
TEST RESULTS(Cont.)
LIMITS
The Occupied Channel Bandwidth shall fall completely within the 2400 – 2483.5 MHz band.
In addition, for non-adaptive systems using wide band modulations other than FHSS and with e.i.r.p greater than
10 dBm, the occupied channel bandwidth shall be less than 20 MHz
TEST SETUP:
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
e.i.r.p. < 10 dBm
Channel Low
Channel High
Measurement
Setting Instrument Instrument
Value Value
Start Frequency 2.39200 GHz 2.45200 GHz
Stop Frequency 2.43200 GHz 2.49200 GHz
Span 40.000 MHz 40.000 MHz
RBW 500.000 kHz 500.000 kHz
VBW 2.000 MHz 2.000 MHz
SweepPoints 161 161
Sweeptime 1.000 s 1.000 s
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter 3 dB 3 dB
Trace Mode Max Hold Max Hold
Sweeptype Sweep Sweep
Preamp off off
Stablemode Trace Trace
Stablevalue 0.50 dB 0.50 dB
Run 4 / max. 150 7 / max. 150
Stable 3/3 3/3
Max Stable Difference 0.07 dB 0.01 dB
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
e.i.r.p. < 10 dBm
Channel Low
Channel High
Measurement
Setting Instrument Instrument
Value Value
Start Frequency 2.39200 GHz 2.45200 GHz
Stop Frequency 2.43200 GHz 2.49200 GHz
Span 40.000 MHz 40.000 MHz
RBW 500.000 kHz 500.000 kHz
VBW 2.000 MHz 2.000 MHz
SweepPoints 161 161
Sweeptime 1.000 s 1.000 s
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter 3 dB 3 dB
Trace Mode Max Hold Max Hold
Sweeptype Sweep Sweep
Preamp off off
Stablemode Trace Trace
Stablevalue 0.50 dB 0.50 dB
Run 4 / max. 150 4 / max. 150
Stable 3/3 3/3
Max Stable Difference 0.07 dB 0.09 dB
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
e.i.r.p. < 10 dBm
Bandwidth: 20 MHz
Channel Low
Channel High
Measurement
Setting Instrument Instrument
Value Value
Start Frequency 2.39200 GHz 2.45200 GHz
Stop Frequency 2.43200 GHz 2.49200 GHz
Span 40.000 MHz 40.000 MHz
RBW 500.000 kHz 500.000 kHz
VBW 2.000 MHz 2.000 MHz
SweepPoints 161 161
Sweeptime 1.000 s 1.000 s
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter 3 dB 3 dB
Trace Mode Max Hold Max Hold
Sweeptype Sweep Sweep
Preamp off off
Stablemode Trace Trace
Stablevalue 0.50 dB 0.50 dB
Run 4 / max. 150 4 / max. 150
Stable 3/3 3/3
Max Stable Difference 0.03 dB 0.09 dB
Type of equipment: Adaptive Equipment without the possibility to switch to a non-adaptive mode.
e.i.r.p. < 10 dBm
Bandwidth: 20 MHz
Channel Low
Channel High
Measurement
Setting Instrument Instrument
Value Value
Start Frequency 2.38200 GHz 2.42200 GHz
Stop Frequency 2.46200 GHz 2.50200 GHz
Span 80.000 MHz 80.000 MHz
RBW 1.000 MHz 1.000 MHz
VBW 3.000 MHz 3.000 MHz
SweepPoints 161 161
Sweeptime 1.000 s 1.000 s
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter 3 dB 3 dB
Trace Mode Max Hold Max Hold
Sweeptype Sweep Sweep
Preamp off off
Stablemode Trace Trace
Stablevalue 0.50 dB 0.50 dB
Run 4 / max. 150 4 / max. 150
Stable 3/3 3/3
Max Stable Difference 0.12 dB 0.03 dB
LIMITS
The transmitter unwanted emissions in the out-of-band domain but outside the allocated band, shall not exceed the
values provided in the next mask:
TEST SETUP:
Channel Low:
Channel High:
Measurement
Setting Instrument Instrument
Value Value
Center Frequency 2.50394 GHz 2.50394 GHz
Span ZeroSpan ZeroSpan
RBW 1.000 MHz 1.000 MHz
VBW 3.000 MHz 3.000 MHz
SweepPoints 27350 27350
Sweeptime 27.350 ms 27.350 ms
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter Channel Channel
Trace Mode Clear Write Clear Write
Sweeptype Sweep Sweep
Preamp off off
Trigger Video Video
Trigger Mode up up
Trigger Level 41.000 % 43.000 %
Trigger Offset 13.675 ms 13.675 ms
Channel Low:
Channel High:
Measurement
Setting Instrument Instrument
Value Value
Center Frequency 2.51679 GHz 2.51679 GHz
Span ZeroSpan ZeroSpan
RBW 1.000 MHz 1.000 MHz
VBW 3.000 MHz 3.000 MHz
SweepPoints 5000 5000
Sweeptime 547.800 µs 547.800 µs
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter Channel Channel
Trace Mode Clear Write Clear Write
Sweeptype Sweep Sweep
Preamp off off
Trigger Video Video
Trigger Mode up up
Trigger Level 41.000 % 44.000 %
Trigger Offset 273.900 µs 273.900 µs
Channel High:
Measurement
Setting Instrument Instrument
Value Value
Center Frequency 2.51878 GHz 2.51878 GHz
Span ZeroSpan ZeroSpan
RBW 1.000 MHz 1.000 MHz
VBW 3.000 MHz 3.000 MHz
SweepPoints 5000 5000
Sweeptime 503.800 µs 503.800 µs
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter Channel Channel
Trace Mode Clear Write Clear Write
Sweeptype Sweep Sweep
Preamp off off
Trigger Video Video
Trigger Mode up up
Trigger Level 42.000 % 42.000 %
Trigger Offset 251.900 µs 251.900 µs
Channel High:
Measurement
Setting Instrument Instrument
Value Value
Center Frequency 2.55654 GHz 2.55654 GHz
Span ZeroSpan ZeroSpan
RBW 1.000 MHz 1.000 MHz
VBW 3.000 MHz 3.000 MHz
SweepPoints 5000 5000
Sweeptime 283.800 µs 283.800 µs
Reference Level 20.000 dBm 20.000 dBm
Attenuation 40.000 dB 40.000 dB
Detector RMS RMS
SweepCount 1 1
Filter Channel Channel
Trace Mode Clear Write Clear Write
Sweeptype Sweep Sweep
Preamp off off
Trigger Video Video
Trigger Mode up up
Trigger Level 42.000 % 42.000 %
Trigger Offset 141.900 µs 141.900 µs
LIMITS
The transmitter unwanted emissions in the spurious domain shall not exceed the values given in the next table:
In case of equipment with antenna connectors, these limits apply to emissions at the antenna port (conducted).
For emissions radiated by the cabinet or emissions radiated by integral antenna equipment (without antenna
connectors), these limits are e.r.p. for emissions up to 1 GHz and e.i.r.p. for emissions above 1 GHz.
Frequency range Maximum power Bandwidth
30 MHz to 47 MHz -36 dBm 100 kHz
47 MHz to 74 MHz -54 dBm 100 kHz
74 MHz to 87,5 MHz -36 dBm 100 kHz
87,5 MHz to 118 MHz -54 dBm 100 kHz
118 MHz to 174 MHz -36 dBm 100 kHz
174 MHz to 230 MHz -54 dBm 100 kHz
230 MHz to 470 MHz -36 dBm 100 kHz
470 MHz to 862 MHz -54 dBm 100 kHz
862 MHz to 1 GHz -36 dBm 100 kHz
1 GHz to 12,75 GHz -30 dBm 1 MHz
TEST SETUP:
All radiated tests were performed in a semi-anechoic chamber. The measurement antenna is situated at a
distance of 3 m for the frequency range 30-1000 MHz (Bilog antenna) and at a distance of 1m for the
frequency range 1-26 GHz (1 GHz-18 GHz and 18 GHz-26 GHz Double ridge horn antennas).
For radiated emissions in the range 1-26 GHz that is performed at a distance closer than the specified
distance, an inverse proportionality factor of 20 dB per decade is used to normalize the measured data for
determining compliance.
The equipment under test was set up on a non-conductive platform above the ground plane and the situation
and orientation was varied to find the maximum radiated emission. It was also rotated 360º and the antenna
height was varied from 1 to 4 meters to find the maximum radiated emission.
Measurements were made in both horizontal and vertical planes of polarization.
The levels of spurious emissions were measured as their power when radiated by cabinet and antenna.
Channel: Low
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
R M S _M A XH P K+_M AX H
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
181.950500 -59.16 -59.98 H
Channel: High
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
R M S _M A XH P K+_M AX H
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
181.950500 -60.23 -61.30 H
233.991000 -63.65 -65.14 V
415.963000 -58.15 -58.92 V
Channel: Low
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2413.250000 -0.41 -3.48 H Fundamental
4824.062500 -45.68 -50.63 V
Channel: High
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2473.166667 -0.46 -3.43 H Fundamental
4944.312500 -46.53 -53.51 V
The level of spurious emissions was measured as their power when radiated by cabinet and antenna.
Channel: Low
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
181.950500 -59.54 -60.22 H
415.963000 -54.71 -55.06 V
Channel: High
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
Maximizations
Channel: Low
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Channel: High
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2473.250000 -0.29 -6.33 V Fundamental
4172.031250 -47.77 -55.87 V
The level of spurious emissions was measured as their power when radiated by cabinet and antenna.
Channel: Low
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
181.950500 -59.44 -60.66 H
233.991000 -59.69 -60.80 V
389.967000 -57.42 -57.86 H
649.975500 -55.90 -56.80 V
Channel: High
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
181.950500 -60.15 -60.89 H
233.991000 -59.58 -60.51 V
389.967000 -59.22 -60.05 H
649.975500 -56.47 -58.14 V
Channel: Low
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2414.416667 -0.03 -7.03 V Fundamental
5281.093750 -45.82 -53.93 V
Channel: High
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2474.500000 -0.69 -7.01 V Fundamental
10705.343750 -46.71 -54.83 V
The level of spurious emissions was measured as their power when radiated by cabinet and antenna.
Channel: Low
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
R M S _M A XH P K+_M AX H
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
696.050500 -54.85 -59.53 V
Channel: High
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-4 0
-5 0
Level in dBm
-6 0
-7 0
-8 0
-9 0
R M S _M A XH P K+_M AX H
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
696.002000 -54.88 -59.87 V
817.446000 -53.79 -58.36 V
Result Table_Single
Frequency MaxPeak RMS Pol
(MHz) (dBm) (dBm)
696.002000 -55.1 -64.0 V
817.446000 -68.7 -79.1 V
Channel: Low
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2422.333333 -7.66 -14.21 V Fundamental
5062.937500 -47.27 -54.48 V
Channel: High
5
0
-1 0
-2 0
Level in dBm
T X limits to S p u rio u s E m is s io n E N 3 0 0 3 2 8 V 2 .1 .1 .
-3 0
-4 0
-5 0
-6 0
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol Comment
(MHz) (dBm) (dBm)
2462.166667 -5.39 -14.78 V Fundamental
4924.000000 -47.68 -55.18 V
LIMITS
In case of equipment with antenna connectors, these limits apply to emissions at the antenna port (conducted).
For emissions radiated by the cabinet or emissions radiated by integral antenna equipment (without antenna
connectors), these limits are e.r.p. for emissions up to 1 GHz and e.i.r.p. for emissions above 1 GHz.
TEST SETUP:
All radiated tests were performed in a semi-anechoic chamber. The measurement antenna is situated at a
distance of 3 m for the frequency range 30-1000 MHz (Bilog antenna) and at a distance of 1m for the
frequency range 1-26 GHz (1 GHz-18 GHz and 18 GHz-26 GHz Double ridge horn antennas).
For radiated emissions in the range 1-26 GHz that is performed at a distance closer than the specified
distance, an inverse proportionality factor of 20 dB per decade is used to normalize the measured data for
determining compliance.
The equipment under test was set up on a non-conductive platform above the ground plane and the situation
and orientation was varied to find the maximum radiated emission. It was also rotated 360º and the antenna
height was varied from 1 to 4 meters to find the maximum radiated emission.
Measurements were made in both horizontal and vertical planes of polarization.
The level of spurious emissions was measured as their power when radiated by cabinet and antenna.
Channel: Low
-6 0
-6 5
Level in dBm
-7 0
-7 5
-8 0
-8 5
-9 0
-9 5
R M S _M A XH P K+_M AX H
R X lim it s t o S p u rio u s E m iss io n E N 3 0 0 3 2 8 V 2 . 1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
415.963000 -58.82 -59.84 V
480.031500 -52.63 -61.56 V
672.043000 -59.21 -62.40 V
696.050500 -56.06 -60.28 V
720.009500 -59.65 -61.37 H
909.935500 -59.60 -62.23 V
Result Table_Single
Frequency MaxPeak RMS Pol
(MHz) (dBm) (dBm)
415.963000 -58.4 -64.3 V
480.031500 -50.0 -70.9 V
672.043000 -58.6 -66.6 V
696.050500 -65.0 -75.3 V
720.009500 -58.6 -62.0 H
909.935500 -60.4 -66.9 V
Channel: High
-6 0
-6 5
Level in dBm
-7 0
-7 5
-8 0
-8 5
-9 0
-9 5
R M S _M A XH P K+_M AX H
R X lim it s t o S p u rio u s E m iss io n E N 3 0 0 3 2 8 V 2 . 1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
415.963000 -59.33 -60.12 V
479.983000 -53.12 -62.65 V
672.043000 -59.08 -62.52 V
696.002000 -55.81 -60.54 V
720.009500 -60.41 -61.93 H
909.935500 -60.86 -62.59 V
Channel: Low
-5 0
-5 5
Level in dBm
-6 0
-6 5
-7 0
-7 5
-8 0
-8 5
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Channel: High
-5 0
-5 5
Level in dBm
-6 0
-6 5
-7 0
-7 5
-8 0
-8 5
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
1440.135417 -53.09 -64.22 H
2499.593750 -58.34 -60.43 V
4999.406250 -57.84 -61.87 V
The level of spurious emissions was measured as their power when radiated by cabinet and antenna.
-6 0
-6 5
Level in dBm
-7 0
-7 5
-8 0
-8 5
-9 0
-9 5
R M S _M A XH P K+_M AX H
R X lim it s t o S p u rio u s E m iss io n E N 3 0 0 3 2 8 V 2 . 1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
415.963000 -59.30 -60.35 V
479.983000 -53.37 -62.89 V
672.043000 -58.24 -62.00 V
696.002000 -56.17 -60.99 V
720.009500 -59.35 -61.27 H
Channel: High
-6 0
-6 5
Level in dBm
-7 0
-7 5
-8 0
-8 5
-9 0
-9 5
R M S _M A XH P K+_M AX H
R X lim it s t o S p u rio u s E m iss io n E N 3 0 0 3 2 8 V 2 . 1 .1M
. a x P e a k -P K + ( S in g le )
R M S (S in g le )
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
129.958500 -62.83 -63.55 H
415.963000 -59.84 -60.56 V
672.043000 -59.40 -62.73 V
696.002000 -54.71 -59.29 V
720.009500 -60.07 -61.54 H
Result Table_Single
Frequency MaxPeak RMS Pol
(MHz) (dBm) (dBm)
129.958500 -64.5 -65.4 H
415.963000 -58.8 -63.6 V
672.043000 -58.4 -64.3 V
696.002000 -54.6 -61.8 V
720.009500 -58.0 -62.1 H
Channel: Low
-5 0
-5 5
Level in dBm
-6 0
-6 5
-7 0
-7 5
-8 0
-8 5
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
Frequency PK+_MAXH RMS_MAXH Pol
(MHz) (dBm) (dBm)
2209.760417 -61.25 -64.14 H
2499.593750 -58.56 -60.25 V
4999.406250 -58.38 -62.84 V
Channel: High
-5 0
-5 5
Level in dBm
-6 0
-6 5
-7 0
-7 5
-8 0
-8 5
1G 2G 3G 4G 5G 6 8 1 2 .7 5 G
F re q u e n c y in H z
Maximizations
The minimum performance criterion shall be a PER less than or equal to 10 %. The manufacturer may declare
alternative performance criteria as long as that is appropriate for the intended use of the equipment (see
application form section t)).
The blocking levels at specified frequency offsets shall be equal to or greater than the limits defined for the
applicable receiver category provided in table 14, table 15 or table 16.
TEST SETUP(Cont.):
Equipment Category: 1
a) Operating Channel: Low channel center frequency 2412 MHz / b mode / 11Mbps
Declared Bandwidths: 20 MHz
Wanted signal sensitivity level (Pmin) at 2412 MHz: -90 dBm
Blocking signal frequency (MHz) Blocking Signal power PER PER Result
level corrected by the
% Limit
actual antenna
%
assembly gain (dBm)
2380 -50.2 1.5 10 P
2503.5 -50.2 1.8 10
P
2300 -44.2 1.4 10
P
2330 -44.2 1.3 10
P
2360 -44.2 1.1 10 P
2523.5 -44.2 1.2 10 P
2553.5 -44.2 1.3 10 P
2583.5 -44.2 1.5 10 P
2613.5 -44.2 1.1 10 P
2643.5 -44.2 1.2 10 P
2673.5 -44.2 1.7 10 P
a) Operating Channel: High channel center frequency 2472 MHz / b mode / 11Mbps
Declared Bandwidths: 20 MHz
Wanted signal sensitivity level (Pmin) at 2472 MHz: -89 dBm
Blocking signal frequency (MHz) Blocking Signal power PER PER Result
level corrected by the
% Limit
actual antenna
%
assembly gain (dBm)
2380 -50.2 1.9 10 P
2503.5 -50.2 1.7 10
P
2300 -44.2 1.5 10
P
2330 -44.2 1.0 10
P
2360 -44.2 1.3 10 P
2523.5 -44.2 1.3 10 P
2553.5 -44.2 1.5 10 P
2583.5 -44.2 1.7 10 P
2613.5 -44.2 1.9 10 P
2643.5 -44.2 1.3 10 P
2673.5 -44.2 1.2 10 P
Appendix C: Photographs