Professional Documents
Culture Documents
INSULATORS
INDOOR SERVICE
OVERVIEW
Because of their excellent electrical and mechanical The metallic inserts anchored inside the resin during the
characteristics, DRIWISA™ insulators are used in great manufacturing process allows a high torque for standard
extent in medium voltage metal-enclosed and metal-clad screws guaranteeing high resistance. Their low weight and
switchboards for medium voltage (from 7.2 up to 38 kV). reduced manufacturing tolerances allow DRIWISA™
insulators to perform with excellent mechanical
They are mainly used to support conducting bars of buses characteristics.
and cable support, fuse-clips and other similar devices, to
further support live parts from medium voltage equipment, as The exclusive design of their shapes, with a round profile
spare parts for DRIWISA™ load-break and non load-break prevents dust accumulation and makes cleaning easier.
switches. Their dimensions are adequate to match electrical and
mechanical specifications for DRIWISA™ devices
DRIWISA™ insulators are manufactured with resin specially according to international standards (IEC).
formulated for medium voltage applications and according to
the highest technological standards. The design permits
horizontal or vertical mounting, able to support the weight of
conducting bars in any position. Their robust design enables
them to withstand dynamic stresses produced by short-circuit
currents.
TYPE MODEL kV kV kA N kV kV
A DWA-07A 6.6 7.2 25 4000 1 27 60
A DWA-15A 13.8 17.5 25 4000 4 45 95
A DWA-20A 23 25.8 25 4000 5 55 125
A DWA-30A 34.5 38 25 4000 9 75 150
TOP FACE
DOWN FACE