Professional Documents
Culture Documents
ownership. A choice of three premium compressor types (GA VSD, GA+ and GA) provides you with the compressed air solution that perfectly
matches your requirements with clear value propositions. Built to perform even in the harshest environments, these compressors keep your
pressure drops.
Smart Elektronikon® graphic compressor controller with high-definition
color display.
air can account for more than 40% of a plant’s total electricity bill. To cut your energy costs, Atlas Copco pioneered
Variable Speed Drive (VSD) technology in the compressed air industry. VSD leads to major energy savings, while protecting
the environment for future generations. Thanks to continual investments in this technology, Atlas Copco offers the widest
Integrated Elektronikon® Graphic controller controls the motor speed and high efficiency frequency inverter.
Compressor can start/stop under full system pressure without the need to unload with special VSD motor.
IME
NO IDLINGT
Air demand Energy consumption Air demand Energy consumption
Air demand Energy consumption Time Air demand GA VSD energy consumption Time
Fixed speed load/unload
In almost every production environment, air demand fluctuates depending on different factors such as the time of
the day, week or even month. Extensive measurements and studies of compressed air demand profiles show that
many compressors have substantial variations in air demand.
55.00
50.00
45.00
40.00
35.00
30.00
25.00
20.00
15.00
10.00
5.00 Unload and blow-off losses
Time
2 Flexible pressure selection from 4 to 13 bar with 7 A highly efficient frequency converter in a cool
electronic gearing reduces electricity costs. overpressure cubicle ensures stable operation in high
ambient temperatures up to 50°C/122°F*.
3 Special electric motor specifically designed for VSD * Standard up to 46°C/114.8°F.
operation (inverter duty motor). Bearings are protected
against induced bearing currents. Both motor and 8 No ‘speed windows’ that can jeopardize the energy
converter are perfectly tuned for highest efficiency savings and the stable net pressure. Turndown
across the entire speed range. capability of the compressor is maximized to 80-85%.
4 Electric motor specifically designed for low 9 The cubicle cooling booster increases the lifetime of
operating speeds with clear attention to motor cooling electrical components due to a cool cubicle in
and compressor cooling requirements. overpressure and reduced dust ingress.
5 All Atlas Copco GA VSD compressors are EMC tested and 10 Net pressure band is maintained within 0.10 bar,
certified. External sources do not influence compressor 1.5 psi.
operation, nor does the compressor affect the operation of
other instruments via emissions or via the power supply line.
100%
1
Maintenance-free drive system
100% maintenance-free; totally enclosed and protected against dirt and dust.
2
IE2 High Efficiency electrical motors
8
IP55, insulation Class F, B rise.
3
Robust spin-on oil filter
High-efficiency, removing 300% smaller particles
2
4
1
SIL Smart inlet lock system for
GA VSD compressors
Superior designed vacuum and air pressure controlled
5
Separate oversized oil cooler
and aftercooler
Low element outlet temperatures, ensuring long oil lifetime.
No consumables.
10
Integrated highly efficient
R410A dryer
Excellence in air quality.
50% reduction in energy consumption compared
to traditional dryers.
Zero ozone depletion.
Incorporates optional DD and PD filters according
to Class 1.4.1.
9
9
Elektronikon® for remote
monitoring
5
Integrated smart algorithms reduce system pressure
and energy consumption.
Monitoring features include warning indications,
maintenance scheduling and online
visualization of machine’s condition.
4
8
Heavy-duty air intake filter
Protects the compressor components by removing
99.9% of dirt particles down to 3 microns.
3 Differential inlet pressure for proactive maintenance
while minimizing pressure drop.
7
Electronic no-loss water drain
(optional)
Ensures constant removal of condensate.
6 Manual integrated bypass for effective condensate
removal in case of power failure.
Water separator device (WSD) Integrated with compressor’s Elektronikon® with
High efficient.
warning/alarm features.
Ensures constant removal of condensate.
No loss of compressed air.
A step ahead in monitoring and controls
The next-generation Elektronikon® operating system offers a wide variety of control and monitoring features that allow you to increase
your compressor’s efficiency and reliability. To maximize energy efficiency, the Elektronikon® controls the main drive motor and regulates
Improved user-friendliness
3.5-inch high-definition color display with clear pictograms
On-screen Delayed Second Stop function and VSD
1
2
Average Pressure
3 1 2 3 Average Pressure
Min. System Pressure Min. System Pressure
Compressors
The Elektronikon® continuously monitors critical parameters. Monitoring features include service and warning indications, error detection, compressor
shut-down and maintenance scheduling.
Power Power
Loaded Loaded
Unloaded Unloaded
Stopped
Time Time
Saved energy
resulting in risk of corrosion and compressed air system leaks. Maintenance costs can far exceed air treatment costs. Our compressors provide the
clean, dry air that improves your system’s reliability, avoids costly downtime and production delays, and safeguards the quality of your products.
E
ZERO OZON
DEPLETION
On average 50% energy savings with
R410A integrated dryers
- Use of energy-efficient refrigerant R410A reduces operating costs.
- R410A refrigerant reduces global warming potential by an average
of 50%.
- Environmentally-friendly characteristics; zero ozone depletion.
- Unique Saver Cycle Control, with ambient temperature sensor and
based on dryer load and relative humidity of compressed air, saves
energy at partial load.
- Heat exchanger cross-flow technology with low pressure drop.
- Zero waste of compressed air thanks to no-loss condensate drain.
- Pressure dew point of 3°C (100% relative humidity at 20°C).
Integrated purity
The optional DD/PD filters and integrated refrigerant air dryer downstream equipment, increasing efficiency and ensuring
(IFD) efficiently remove moisture, aerosols and dirt particles to quality of your final product.
protect your investment. This air quality prolongs the life of
ISO quality class* Dirt particle size Water pressure dew point** Oil concentration
* The table values reflect the maximum limits according to the temperature ISO gravity class.
** Water pressure dew point based on 100% RH at 20°C/68°F.
WorkPlace: Compressed air at the point of use
With the industry-leading low noise operation and integration of air and condensate treatment equipment, the GA+ offers complete versatility
for your production. The compressor’s integrated design allows it to be placed on the production floor, creating substantial energy savings for
your business.
The GA+ is delivered ready for use – minimizing production downtime and reducing installation costs.
Filtration equipment is integrated – reducing the need for costly external piping and minimizing pressure drops.
The filtration system produces clean air to prevent network corrosion – minimizing energy, repair and maintenance costs.
The GA+ operates at the lowest possible system pressure to reduce energy costs thanks to the Elektronikon® advanced
monitoring system.
Atlas Copco has developed options and easily integrated compatible equipment.
Condensate OSCi
Rain protection -
Public works Main power isolator switch
ES 100 relays***
AIRconnect
Elektronikon® Graphic upgrade (only for GA 37 to GA 75) -
ES4i/ES6i (for Elektronikon® Graphic)
Communication Digital I/O expansion module
Food industry.
Drying processes.
Flow charts
Variable Speed Drive: GA VSD
E
A Intake air
B Air/oil mixture
C Oil
A D Wet compressed air
E Condensate
F Dried compressed air
D
B
E
C
Vp
E
A Intake air
B Air/oil mixture
C Oil
D Wet compressed air
E Condensate
F Dried compressed air
A D
B
E
C
Vp
D
W
Technical specifications GA 30+-90 (50 Hz versions)
Weight
Max. working pressure Noise Weight
Capacity FAD* Installed motor power WorkPlace
Compressor Pressure WorkPlace level** WorkPlace Full Feature
TYPE variant
bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs
GA 30 +
7.5 7.5 109 99 5.9 209 30 40 65 917 2022 998 2200
8.5 8.5 123 90 5.4 191 30 40 65 917 2022 998 2200
10 10.0 145 82 4.9 175 30 40 65 917 2022 998 2200
13 13.0 189 71 4.3 151 30 40 65 917 2022 998 2200
GA 37 7.5 7.5 109 115 6.9 243 37 50 69 920 2028 1005 2216
8.5 8.5 123 106 6.4 225 37 50 69 920 2028 1005 2216
10 10.0 145 100 6.0 213 37 50 69 920 2028 1005 2216
13 13.0 189 81 4.9 172 37 50 69 920 2028 1005 2216
GA 37+ 7.5 7.5 109 122 7.3 258 37 50 65 1002 2209 1087 2396
8.5 8.5 123 118 7.1 250 37 50 65 1002 2209 1087 2396
10 10.0 145 102 6.1 216 37 50 65 1002 2209 1087 2396
13 13.0 189 85 5.1 180 37 50 65 1002 2209 1087 2396
GA 45 7.5 7.5 109 137 8.2 291 45 60 72 994 2191 1079 2379
8.5 8.5 123 127 7.6 268 45 60 72 994 2191 1079 2379
10 10.0 145 117 7.0 248 45 60 72 994 2191 1079 2379
13 13.0 189 102 6.1 217 45 60 72 994 2191 1079 2379
GA 45+ 7.5 7.5 109 149 8.9 315 45 60 66 1070 2359 1160 2557
8.5 8.5 123 139 8.3 295 45 60 66 1070 2359 1160 2557
10 10.0 145 128 7.7 270 45 60 66 1070 2359 1160 2557
13 13.0 189 106 6.4 225 45 60 66 1070 2359 1160 2557
GA 55 7.5 7.5 109 169 10.1 359 55 75 69 1329 2930 1429 3150
8.5 8.5 123 159 9.5 337 55 75 69 1329 2930 1429 3150
10 10.0 145 148 8.9 313 55 75 69 1329 2930 1429 3150
13 13.0 189 126 7.6 267 55 75 69 1329 2930 1429 3150
GA 55 + 7.5 7.5 109 180 10.8 381 55 75 66 1458 3214 1558 3435
8.5 8.5 123 172 10.3 364 55 75 66 1458 3214 1558 3435
10 10.0 145 153 9.2 324 55 75 66 1458 3214 1558 3435
GA 75 7.5 7.5 109 226 13.6 478 75 100 66 1371 3023 1491 3287
8.5 8.5 123 209 12.5 444 75 100 73 1371 3023 1491 3287
10 10.0 145 190 11.4 401 75 100 73 1371 3023 1491 3287
13 13.0 189 162 9.7 344 75 100 73 1371 3023 1491 3287
GA 75+ 7.5 7.5 109 247 14.8 523 75 100 68 1525 3362 1645 3627
8.5 8.5 123 232 13.9 492 75 100 68 1525 3362 1645 3627
10 10.0 145 207 12.4 439 75 100 68 1525 3362 1645 3627
13 13.0 189 173 10.4 367 75 100 68 1525 3362 1645 3627
GA 90 7.5 7.5 109 281 16.9 596 90 125 73 1525 3362 1645 3627
8.5 8.5 123 275 16.5 582 90 125 73 1525 3362 1645 3627
10 10.0 145 250 15.0 529 90 125 73 1525 3362 1645 3627
13 13.0 189 216 13.0 458 90 125 73 1525 3362 1645 3627
** A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2ºC to 3ºC, 36°F to 37°F.
Technical specifications GA 30+-90 (60 Hz versions)
Weight
Max. working pressure Noise Weight
Capacity FAD* Installed motor power WorkPlace
Compressor Pressure WorkPlace level** WorkPlace Full Feature
TYPE variant
bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs
GA 30 +
100 7.4 107 100 6.0 212 30 40 65 917 2022 998 2200
125 9.1 132 91 5.5 192 30 40 65 917 2022 998 2200
150 10.8 157 82 4.9 174 30 40 65 917 2022 998 2200
175 12.5 181 75 4.5 158 30 40 65 917 2022 998 2200
GA 37 100 7.4 107 116 7.0 246 37 50 69 920 2028 1005 2216
125 9.1 132 108 6.5 229 37 50 69 920 2028 1005 2216
150 10.8 157 96 5.8 204 37 50 69 920 2028 1005 2216
175 12.5 181 87 5.2 185 37 50 69 920 2028 1005 2216
GA 37+ 100 7.4 107 120 7.2 255 37 50 65 1002 2209 1087 2396
125 9.1 132 111 6.7 234 37 50 65 1002 2209 1087 2396
150 10.8 157 100 6.0 212 37 50 65 1002 2209 1087 2396
175 12.5 181 91 5.4 192 37 50 65 1002 2209 1087 2396
GA 45 100 7.4 107 139 8.3 294 45 60 72 994 2191 1079 2379
125 9.1 132 128 7.7 271 45 60 72 994 2191 1079 2379
150 10.8 157 118 7.1 250 45 60 72 994 2191 1079 2379
175 12.5 181 105 6.3 222 45 60 72 994 2191 1079 2379
GA 45+ 100 7.4 107 146 8.8 310 45 60 66 1070 2359 1160 2557
125 9.1 132 134 8.0 284 45 60 66 1070 2359 1160 2557
150 10.8 157 126 7.5 266 45 60 66 1070 2359 1160 2557
175 12.5 181 111 6.7 236 45 60 66 1070 2359 1160 2557
GA 55 100 7.4 107 174 10.5 369 55 75 69 1329 2930 1429 3150
125 9.1 132 154 9.3 327 55 75 69 1329 2930 1429 3150
150 10.8 157 142 8.5 300 55 75 69 1329 2930 1429 3150
175 12.5 181 128 7.7 272 55 75 69 1329 2930 1429 3150
GA 55 + 100 7.4 107 181 10.9 384 55 75 67 1458 3214 1558 3435
125 9.1 132 163 9.8 345 55 75 67 1458 3214 1558 3435
150 10.8 157 138 8.3 292 55 75 67 1458 3214 1558 3435
GA 75 100 7.4 107 225 13.5 476 75 100 67 1371 3023 1491 3287
125 9.1 132 198 11.9 424 75 100 73 1371 3023 1491 3287
150 10.8 157 186 11.2 401 75 100 73 1371 3023 1491 3287
175 12.5 181 169 10.1 358 75 100 73 1371 3023 1491 3287
GA 75 + 100 7.4 107 247 14.8 523 75 100 69 1525 3362 1645 3627
125 9.1 132 226 13.6 479 75 100 69 1525 3362 1645 3627
150 10.8 157 201 12.1 426 75 100 69 1525 3362 1645 3627
175 12.5 181 179 10.7 379 75 100 69 1525 3362 1645 3627
GA 90 100 7.4 107 284 17.0 602 90 125 74 1525 3362 1645 3627
125 9.1 132 262 15.7 555 90 125 74 1525 3362 1645 3627
150 10.8 157 245 14.7 519 90 125 74 1525 3362 1645 3627
175 12.5 181 224 13.4 475 90 125 74 1525 3362 1645 3627
Please refer to the footnotes, reference conditions and FAD details of the 50 Hz versions.
bar(e) psig min max min max min max kW hp dB(A) kg lbs kg lbs
GA 37 VSD 4 58 26.0 124 1.6 7.4 55 263 37 50 66/67 1142 2518 1227 2705
7 102 26.0 123 1.6 7.4 55 260 37 50 66/67 1142 2518 1227 2705
10 145 25.8 107 1.5 6.4 55 226 37 50 66/67 1142 2518 1227 2705
13 189 40.3 87 2.4 5.2 85 185 37 50 66/67 1142 2518 1227 2705
GA 45 VSD 4 58 26.0 146 1.6 8.8 55 310 45 60 69/72 1200 2646 1290 2844
7 102 26.0 145 1.6 8.7 55 307 45 60 69/72 1200 2646 1290 2844
10 145 25.8 128 1.5 7.7 55 271 45 60 69/72 1200 2646 1290 2844
13 189 40.3 107 2.4 6.4 85 226 45 60 69/72 1200 2646 1290 2844
GA 55 VSD 4 58 32.4 197 1.9 11.8 69 418 55 75 69/72 1480 3263 1580 3483
7 102 26.0 175 1.6 10.5 55 371 55 75 69/72 1480 3263 1580 3483
10 145 25.4 155 1.5 9.3 54 328 55 75 69/72 1480 3263 1580 3483
13 189 37.0 129 2.2 7.7 78 273 55 75 69/72 1480 3263 1580 3483
GA 75 VSD 4 58 37.8 248 2.3 14.9 80 525 75 100 69/70 1632 3598 1752 3862
7 102 37.4 246 2.2 14.8 79 521 75 100 69/70 1632 3598 1752 3862
10 145 48.1 216 2.9 13.0 102 458 75 100 69/70 1632 3598 1752 3862
13 189 58.3 180 3.5 10.8 124 381 75 100 69/70 1632 3598 1752 3862
GA 90 VSD 4 58 37.0 290 2.2 17.4 78 614 90 125 73/74 1632 3598 1752 3862
7 102 39.4 289 2.4 17.3 84 612 90 125 73/74 1632 3598 1752 3862
10 145 48.3 253 2.9 15.2 102 536 90 125 73/74 1632 3598 1752 3862
13 189 59.4 209 3.6 12.5 126 443 90 125 73/74 1632 3598 1752 3862
* Unit performance measured according to ISO 1217, Annex E, Edition 4
Maximum working pressure for VSD machines: 13 bar(e) (188 psig)
Driven by innovation
With more than 135 years of innovation and experience, Atlas Copco will deliver the
products and services to help maximize your company’s efficiency and productivity.
As an industry leader, we are dedicated to offering high air quality at the lowest
possible cost of ownership. Through continuous innovation, we strive to safeguard
your bottom line and bring you peace of mind.
2935 0814 40 – Printed in Belgium – Subject to alteration without prior notice. Never use compressed air as breathing air without prior purification in accordance with local legislation and standards.
Building on interaction
As part of our long-term relationship with our customers, we have accumulated
extensive knowledge of a wide diversity of processes, needs and objectives. This
gives us the flexibility to adapt and efficiently produce customized compressed air
solutions that meet and exceed your expectations.
www.atlascopco.com
OIL-INJECTED
ROTARY SCREW
COMPRESSORS
Metal industry
Metal plants use compressed air for instrumentation, plant air
and pneumatic conveying for raw materials or ash and are in
need of an efficient solution to reduce their operating costs.
Thanks to their innovative features, our GA air compressors
meet this demand.
Mining industry
Compressed air is vital for the mining industry: applications
include dust bag filtration, service air, ventilation air and
pneumatic tools. The reliability and robustness of
GA air compressors will accomplish the job even
in the harshest conditions.
Power plants
Power plants run round-the-clock to supply vital energy.
A continuous supply of compressed air is absolutely critical
for trouble-free operation. GA compressors provide a reliable
source of compressed air for applications such as silt blowing
and fly ash handling.
General industry
Many industrial companies use compressed air in their daily
operations. Applications include pneumatic tools for cutting,
drilling, hammering and grinding; pneumatic actuators and
valves; ventilation systems; packing and palleting machinery
and conveyor systems. GA compressors are designed for
ultimate performance and reliability.
Keeping your production
up and running
GA compressors ensure long and trouble-free lifetime at the
lowest operating cost. At their heart are state-of-the-art
compression elements based on innovative asymmetric rotor
profiles and powered by a high efficiency electric motor.
Combined with a built-to-last drive system and heavy duty air
inlet filters, this results in maximum reliability to operate in
the toughest conditions and at ambient temperatures up
to 55°C/131°F.
1
Superior air quality
• Standard integrated water
separator to remove 100%
of the condensate with
electronic drain.
• 3-step efficient oil separation
process for low residual oil
content in the compressed air
(less than 3 ppm).
9
10
2
State-of-the-art screw element
• Patented asymmetric rotor profile for maximum efficiency. 1
• Bearing selection leads to low wear for
increased reliability.
11
3 5
Service friendly 2
• Selection of long lifetime consumables. 4
• Easy and safe access to all service parts. 3
4
Triple benefits with the gear driven transmission
• Built to last, totally enclosed and protected against dirt and dust.
• High-efficiency drive arrangement; no coupling or slippage losses.
• Coupling to absorb the thrust load and increase the reliability.
5
High efficient motor
• TEFC IP55 motor (Class F insulation B rise) protects against
dust and chemicals.
• Continuous operation under severe ambient temperature conditions.
6
Easy to install
• All inclusive package with flexible ducting possibilities.
• All user connections located on the same side of the compressor.
• Phase sequence relay as standard to protect the compressor against
reverse rotation.
7
Integrated refrigerant dryer
7 • Highly efficient dryer to increase the savings.
8
Heavy duty air intake filter
• Protects the compressor components by removing 99.9% of dirt particles
down to 3 microns.
• Reduces the dust load in the fine filter, doubling the filter element lifetime
without reducing filter efficiency.
6
9
Cooling module
• Separated oil and after coolers for highest efficiency.
• Standard design up to 46°C/115°F and HAT (55°C/131°F) variant available.
• Cooling fans located in the middle for fresh air in the system to prevent
build-up of heat.
• Fans with low noise level.
11
Optimized loading/
unloading valve
10
• Assures constant optimized pressure in the
system resulting in high energy savings. Durable design
• Smart design with few moving parts for • Solid metal pipe for durable operation and reduced service costs.
highest reliability. • Rigid straight connections eliminate risk of leaks and improve
• Accurate control through solenoid valve. package efficiency.
VSD: DRIVING DOWN YOUR ENERGY COSTS
Over 70% of a compressor’s lifecycle cost is taken up by the energy it consumes. Moreover, the generation
of compressed air can account for more than 40% of a plant’s total electricity bill. To cut your energy costs,
Atlas Copco has pioneered Variable Speed Drive (VSD) technology for several decades. VSD leads to major
energy savings, reducing the consumption of energy producing fuels and protecting the environment
for future generations. Thanks to continual investments in this technology, we offer the widest range of
integrated VSD compressors on the market.
MAX
MAX
• 64% of all installations. • 28% of all installations. • 8% of all installations.
• Factory working 24 hrs/day: low • Factory working 2 shifts/day, • Factory working 2 shifts/day,
demand at night & high demand no weekend work: erratically no weekend work: typical 'fixed'
during the day. varying air demand. speed application.
12%
Energy savings of up to 35%
Atlas Copco’s VSD technology closely follows the air
11% demand by automatically adjusting the motor speed.
35%
This results in large energy savings of up to 35%.
The Life Cycle Cost of a compressor can be cut by an
average of 22%. In addition, lowered system pressure
with VSD minimizes energy use across your
production dramatically.
Efficiency
External VSD operating range
Integrated VSD Non-integrated VSD Flow gaps due to vibration and noise issues
1 The Elektronikon® unit controller manages both the 7 A highly efficient frequency converter in a cool
compressor and the integrated converter, ensuring overpressure cubicle ensures stable operation in high
maximum machine safety within parameters. ambient temperatures up to 50°C/122°F (standard up to
2 Flexible pressure selection from 4 to 13 bar with electronic 46°C/114.8°F).
gearing reduces electricity costs. 8 It is important to ensure that when using a Variable Speed
3 Specific converter and motor design (with protected Drive vibration and noise issues do not occur. Atlas Copco
bearings) for the highest efficiency across the speed range. compressors are designed and tested to guarantee they
operate across the entire frequency range of operation.
4 Electric motor specifically designed for low operating
When an external VSD drive is used it may become
speeds with clear attention to motor cooling and
necessary to limit the operating range of the compressor,
compressor cooling requirements.
leading to reduced energy saving and jeopardizing stable
5 All Atlas Copco GA VSD compressors are EMC tested and air network pressure.
certified. Compressor operation does not influence external
9 The cubicle cooling booster increases the lifetime
sources and vice versa.
of electrical components due to a cool cubicle in
6 Mechanical enhancements ensure that all components overpressure and reduced dust ingress.
operate below critical vibration levels throughout the entire
10 Net pressure band is maintained within 0.10 bar, 1.5 psi.
compressor speed range.
No current peaks
% Full load current
Star Delta
DOL
Soft Starter
VSD
Seconds
INCREASE YOUR SAVINGS WITH
ENERGY RECOVERY
The Kyoto directives and the continuing depletion of traditional energy sources mean that businesses
throughout the world are making commitments to significantly reduce overall energy consumption.
Through innovative products and solutions, Atlas Copco helps you achieve your goals in this area.
When it comes to compressed air production – where energy costs can constitute 70% of total lifecycle
costs – saving energy can also lead to substantial cost savings.
Shower Space heating Steam boiler Process Heat driven chillers Heat exchangers
Applications:
• Heating of facilities, warehouses or workshops.
• Drying air for painting and washing applications.
PROTECT YOUR PRODUCTION WITH THE GA FF
Untreated compressed air contains moisture, aerosols and dirt particles that can damage your air system
and contaminate your end product, resulting in risk of corrosion and compressed air system leaks.
Maintenance costs can far exceed air treatment costs. Our compressors provide the clean, dry air that
improves your system’s reliability, avoids costly downtime and production delays, and safeguards the
quality of your products.
Configure your GA
ISO Quality Class Dirt Particle Size Water Pressure Dew Point Oil Concentration
for the air quality you need
Protects
Controls
Communicates
Loaded
Loaded Unloaded
Unloaded Stopped
Time Time
Saved energy
Modulation control • -
Anchor pads • •
Material certificates • •
Seaworthy packaging • •
* GA VSD up to 50°C/122°F; GA fix speed Pack up to 55°C/131°F. Not available on Full Feature. • : Optional - : Not available
FLOW CHART
Fixed speed: GA+ & GA
A D
B
E
A Intake air
B Air/oil mixture
C C Oil
Vp
D Wet compressed air
E Condensate
D
B
E
A Intake air
B Air/oil mixture
C Oil
C
Vp D Wet compressed air
E Condensate
bar(e) psig bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs
GA 90+ 5.5 80 5.3 77 336 20.2 712 90 125 74 3000 6614 3393 7480
7.5 109 7.3 106 293 17.6 621 90 125 74 3000 6614 3393 7480
8.5 123 8.3 120 280 16,8 593 90 125 74 3000 6614 3393 7480
10 145 9.8 142 253 15.2 536 90 125 74 3000 6614 3393 7480
GA 110 5.5 80 5.3 77 402 24.1 852 110 150 74 3100 6834 3493 7701
7.5 109 7.3 106 364 21.8 771 110 150 74 3100 6834 3493 7701
8.5 123 8.3 120 340 20.4 720 110 150 74 3100 6834 3493 7701
10 145 9.8 142 312 18.7 661 110 150 74 3100 6834 3493 7701
14 203 13.8 200 239 14.3 506 110 150 74 3100 6834 3493 7701
GA 132 5.5 80 5.3 77 474 28.4 1004 132 175 74 3375 7441 3768 8307
7.5 109 7.3 106 430 25.8 911 132 175 74 3375 7441 3768 8307
8.5 123 8.3 120 401 24.1 850 132 175 74 3375 7441 3768 8307
10 145 9.8 142 373 22.4 790 132 175 74 3375 7441 3768 8307
14 203 13.8 200 300 18.0 636 132 175 74 3375 7441 3768 8307
GA 160 7.5 109 7.3 106 508 30.5 1076 160 215 74 3440 7584 3833 8451
8.5 123 8.3 120 485 29.1 1028 160 215 74 3440 7584 3833 8451
10 145 9.8 142 452 27.1 958 160 215 74 3440 7584 3833 8451
14 203 13.8 200 361 21.7 765 160 215 74 3440 7584 3833 8451
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009). (3) Integrated dryer: compressed air pressure dewpoint at dryer reference conditions 3°C (37°F).
Reference conditions:
• Absolute inlet pressure 1 bar (14.5 psi). FAD(1) is measured at the following working pressures:
• Intake air temperature 20°C (68°F). 8.5 bar version at 7 bar (Standard & FF)
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with 10 bar version at 9.5 bar (Standard & FF)
uncertainty 3 dB). Values determined according to noise level test code ISO 2151 and noise 14 bar version at 13.5 bar (Standard) / 12.5 bar (FF)
measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2°C to 3°C (36°F to 37°F).
DIMENSIONS
Standard Full Feature
Type L W H L W H L W H L W H
mm inch mm inch
GA 90+/GA 110-160 air-cooled & water-cooled 2800 2000 2000 111 79 79 3700 2000 2000 146 79 79
GA 110-160 VSD air-cooled 3200 2000 2347 126 79 92 3800 2002 2347 150 79 92
GA 110-160 VSD water-cooled 3200 1630 2347 126 64 92 3200 1630 2347 126 64 92
TECHNICAL SPECIFICATIONS 60 Hz
Working pressure Weight
Installed motor Noise
Capacity FAD1
TYPE power level2
Standard Full Feature 3
Standard Full Feature
bar(e) psig bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs
GA 90+ 5.5 80 5.3 77 343 20.5 727 90 125 74 3000 6614 3393 7480
7.4 107 7.2 104 302 18.1 640 90 125 74 3000 6614 3393 7480
9.1 132 8.9 129 274 16.4 581 90 125 74 3000 6614 3393 7480
10.9 158 10.7 155 239 14.3 506 90 125 74 3000 6614 3393 7480
GA 110 5.5 80 5.3 77 406 24.3 860 110 150 74 3100 6834 3493 7701
7.4 107 7.2 104 363 21.7 769 110 150 74 3100 6834 3493 7701
9.1 132 8.9 129 331 19.8 701 110 150 74 3100 6834 3493 7701
10.9 158 10.7 155 295 17.7 625 110 150 74 3100 6834 3493 7701
14 203 13.5 196 248 14.9 525 110 150 74 3100 6834 3493 7701
GA 132 5.5 80 5.3 77 467 28.0 990 132 175 74 3375 7441 3768 8307
7.4 107 7.2 104 421 25.2 892 132 175 74 3375 7441 3768 8307
9.1 132 8.9 129 385 23.1 816 132 175 74 3375 7441 3768 8307
10.9 158 10.7 155 346 20.7 733 132 175 74 3375 7441 3768 8307
14 203 13.5 196 290 17.4 614 132 175 74 3375 7441 3768 8307
GA 160 7.4 107 7.2 104 475 28.4 1006 160 215 74 3440 7584 3833 8451
9.1 132 8.9 129 437 26.2 926 160 215 74 3440 7584 3833 8451
10.9 158 10.7 155 397 23.8 841 160 215 74 3440 7584 3833 8451
14 203 13.5 196 337 20.2 714 160 215 74 3440 7584 3833 8451
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009). (3) Integrated dryer: compressed air pressure dewpoint at dryer reference conditions 3°C (37°F).
Reference conditions:
• Absolute inlet pressure 1 bar (14.5 psi). FAD(1) is measured at the following working pressures:
• Intake air temperature 20°C (68°F). 125 psi version at 100 psi (Standard & FF)
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with 150 psi version at 150 psi (Standard & FF)
uncertainty 3 dB). Values determined according to noise level test code ISO 2151 and noise 200 psi version at 196 psi (Standard) / 181 psi (FF)
measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2°C to 3°C (36°F to 37°F).
DIMENSIONS
Standard Full Feature
TYPE L W H L W H L W H L W H
mm inch mm inch
GA 90+/GA 110-160 air-cooled & water-cooled 2800 2000 2000 111 79 79 3700 2000 2000 146 79 79
GA 110-160 VSD air-cooled 3200 2000 2347 126 79 92 3800 2002 2347 150 79 92
GA 110-160 VSD water-cooled 3200 1630 2347 126 64 92 3200 1630 2347 126 64 92
2935 0678 03 © 2016, Atlas Copco, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
Oil-injected rotary
screw compressors
Metal industry
QUALITY AND EFFICIENCY
Metal plants use compressed air for instrumentation, plant air and
pneumatic conveying for raw materials or ash and are in need of
an efficient solution to reduce their operating costs. Thanks to their
innovative features, our GA air compressors meet this demand.
Mining industry
ROBUSTNESS AND RELIABILITY
Compressed air is vital for the mining industry: applications include dust
bad filtration, service air, ventilation air and pneumatic tools.
The reliability and robustness of GA compressors will accomplish the
job even in the harshest conditions.
Power plants
SMOOTH AND COST-EFFECTIVE OPERATION
Power plants run round-the-clock to supply vital energy. A continuous
supply of compressed air is absolutely critical for trouble-free operation.
GA air compressors provide a reliable source of compressed air of
applications such as silt blowing and fly ash handling.
General industry
A SAFE AND RELIABLE POWER SOURCE
Many industrial companies use compressed air in their daily operations.
Applications include pneumatic tools for cutting, drilling, hammering
and grinding, pneumatic actuators and valves, ventilation systems,
packing and palleting machinery and conveyer systems.
GA compressors are designed for ultimate performance and reliability.
Keeping your production
up and running
GA compressors ensure long and trouble-free lifetime at
the lowest operating cost. At their heart are state-of-the-art
compression elements based on innovative asymmetric rotor
profiles and powered by a high efficiency electric motor.
Combined with a built-to-last drive system and heavy duty air
inlet filters, this results in maximum reliability to operate in the
toughest conditions.
1
Practical cooler cleaning
• Hinged fans, fan motors and cowls for easy cooler cleaning.
• Twin fans for optimal cooling.
• Axial cooling fans driven by separate TEFC electric motors (IP55 protection).
2
Superior air quality
• 3-step efficient oil separation process for low residual
4
oil content in the compressed air (less than 3 ppm)
• Hinged cover for easy separator element change
1
5
2
6
3
Protective air filtration
• Protects the compressor components by removing 99.9% of dirt particles
down to 3 microns.
• Extends the system lifetime
7
Elektronikon unit controller
• High resolution color display gives you an easy to understand
readout of the equipment’s running conditions.
• Clear icons and intuitive navigation provides you fast access to
all of the important settings and data.
• Monitoring of the equipment running conditions and
maintenance status.
6
Energy recovery
• The optional energy recovery system can
3
recover up to 75% of the compressor’s shaft
power as hot water.
• The main module of the recovery system is
integrated in the compressor.
5
Twin element on single drive & gear casing
• Efficiencies far superior to designs using one large element or 2-stages.
• Extended lifetime due to reduced loads on bearings, rotors and gears.
• Highly efficient motor – TEFC protection (IP55), class F insulation.
4
Moisture separator as standard
A cyclonic moisture separator, with automatic and manual drain,
mounted as standard, after the cooler block.
Optimize your system
With the GA 355-500, we provide an all-in-one solution incorporating the latest technology in a built-to-last
design. To further optimize the performance of your GA or to simply tailor it to your specific production
environment, optional features are available.
Incoming air
Outgoing air
Air/oil mixture
Water
Oil
Technical specifications
Maximum working pressure Capacity FAD (1) Installed Noise level
Compressor Weight (3)
motor (2), (3)
type Pack Pack
bar(e) psig l/s m3/ min cfm kW dB(A) kg lb
50 Hz
GA 355 - 7.5 7.5 109 1050 63.1 2225 355 73 8402 18523
GA 355 - 8.5 8.5 123 969 58.2 2053 355 73 8402 18523
GA 355 - 10 10 145 890 53.5 1886 355 73 8402 18523
GA 355 - 13 13 189 731 43.9 1549 355 73 8402 18523
GA 400 - 7.5 7.5 109 1175 70.6 2490 400 74 8602 18964
GA 400 - 8.5 8.5 123 1109 66.6 2350 400 74 8602 18964
GA 400 - 10 10 145 1011 60.8 2142 400 74 8602 18964
GA 400 - 13 13 189 844 50.7 1788 400 74 8602 18964
GA 450 - 7.5 7.5 109 1298 78.0 2750 450 75 8702 19185
GA 450 - 8.5 8.5 123 1240 74.5 2628 450 75 8702 19185
GA 450 - 10 10 145 1144 68.8 2424 450 75 8702 19185
GA 450 - 13 13 189 960 57.7 2034 450 75 8702 19185
GA 500 - 7.5 7.5 109 1410 84.7 2988 500 76 8202 18082
GA 500 - 8.5 8.5 123 1347 80.9 2854 500 76 8202 18082
GA 500 - 10 10 145 1257 75.5 2664 500 76 8202 18082
GA 500 - 13 13 189 1068 64.2 2263 500 76 8202 18082
GA 500 figures are for medium voltage IP 23 motor. (1) Unit performance measure according to ISO 1217, (2) Noise level
Annex C, Edition 4 (2009), FAD is measured at the A-weighted emission sound pressure level at the work
Reference conditions: following working pressures: station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Absolute inlet pressure 1 bar (14.5 psi) • 7.5 bar variants at 7 bar Values determined according to noise level test code ISO
Intake air temperature 20°C (68°F) • 8.5 bar variants at 8 bar 2151 and noise measurement standard ISO 9614.
Cooling medium temperature 20°C (68°F) • 10 bar variants at 9.5 bar
• 13 bar variants at 12.5 bar (3) Water-cooled models
GA 500 figures are for medium voltage IP 23 motor. (1) Unit performance measure according to ISO 1217, 2) Noise level
Annex C, Edition 4 (2009), FAD is measured at the A-weighted emission sound pressure level at the work
Reference conditions: following working pressures: station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Absolute inlet pressure 1 bar (14.5 psi) • 100 psi variants at 100 psi Values determined according to noise level test code ISO
Intake air temperature 20°C (68°F) • 125 psi variants at 125 psi 2151 and noise measurement standard ISO 9614.
Cooling medium temperature 20°C (68°F) • 150 psi variants at 150 psi
• 200 psi variants at 193 psi (3) Water-cooled models
Compressor L W H
type mm inch mm inch mm inch
GA 355-500 A (LV and MV-IP23) 5855 230.5 2120 83.5 2500 98.4 H
GA 355-500 A (MV-IP55) 6055 238.4 2120 83.5 2500 98.4
GA 355-500 W (LV and MV-IP23) 4000 157.5 2120 83.5 2500 98.4
GA 355-500 W (MV-IP55) 4200 165.4 2120 83.5 2500 98.4
A = air-cooled LV = low voltage
W = water-cooled MV = medium voltage
W L
2935 0368 19 © 2017, Atlas Copco, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
Oil-injected rotary
screw compressors
Metal industry
QUALITY AND EFFICIENCY
Metal plants use compressed air for instrumentation, plant air and
pneumatic conveying for raw materials or ash and are in need of
an efficient solution to reduce their operating costs. Thanks to their
innovative features, our GA air compressors meet this demand.
Mining industry
ROBUSTNESS AND RELIABILITY
Compressed air is vital for the mining industry: applications include dust
bad filtration, service air, ventilation air and pneumatic tools.
The reliability and robustness of GA compressors will accomplish the
job even in the harshest conditions.
Power plants
SMOOTH AND COST-EFFECTIVE OPERATION
Power plants run round-the-clock to supply vital energy. A continuous
supply of compressed air is absolutely critical for trouble-free operation.
GA air compressors provide a reliable source of compressed air of
applications such as silt blowing and fly ash handling.
General industry
A SAFE AND RELIABLE POWER SOURCE
Many industrial companies use compressed air in their daily operations.
Applications include pneumatic tools for cutting, drilling, hammering
and grinding, pneumatic actuators and valves, ventilation systems,
packing and palleting machinery and conveyer systems.
GA compressors are designed for ultimate performance and reliability.
Keeping your production
up and running
GA compressors ensure long and trouble-free lifetime at
the lowest operating cost. At their heart are state-of-the-art
compression elements based on innovative asymmetric rotor
profiles and powered by a high efficiency electric motor.
Combined with a built-to-last drive system and heavy duty air
inlet filters, this results in maximum reliability to operate in the
toughest conditions.
1
Practical cooler cleaning
• Hinged fans, fan motors and cowls for easy cooler cleaning.
• Twin fans for optimal cooling.
• Axial cooling fans driven by separate TEFC electric motors (IP55 protection).
2
Superior air quality
• 3-step efficient oil separation process for low residual
4
oil content in the compressed air (less than 3 ppm)
• Hinged cover for easy separator element change
1
5
2
6
3
Protective air filtration
• Protects the compressor components by removing 99.9% of dirt particles
down to 3 microns.
• Extends the system lifetime
7
Elektronikon unit controller
• High resolution color display gives you an easy to understand
readout of the equipment’s running conditions.
• Clear icons and intuitive navigation provides you fast access to
all of the important settings and data.
• Monitoring of the equipment running conditions and
maintenance status.
6
Energy recovery
• The optional energy recovery system can
3
recover up to 75% of the compressor’s shaft
power as hot water.
• The main module of the recovery system is
integrated in the compressor.
5
Twin element on single drive & gear casing
• Efficiencies far superior to designs using one large element or 2-stages.
• Extended lifetime due to reduced loads on bearings, rotors and gears.
• Highly efficient motor – TEFC protection (IP55), class F insulation.
4
Moisture separator as standard
A cyclonic moisture separator, with automatic and manual drain,
mounted as standard, after the cooler block.
Optimize your system
With the GA 355-500, we provide an all-in-one solution incorporating the latest technology in a built-to-last
design. To further optimize the performance of your GA or to simply tailor it to your specific production
environment, optional features are available.
Incoming air
Outgoing air
Air/oil mixture
Water
Oil
Technical specifications
Maximum working pressure Capacity FAD (1) Installed Noise level
Compressor Weight (3)
motor (2), (3)
type Pack Pack
bar(e) psig l/s m3/ min cfm kW dB(A) kg lb
50 Hz
GA 355 - 7.5 7.5 109 1050 63.1 2225 355 73 8402 18523
GA 355 - 8.5 8.5 123 969 58.2 2053 355 73 8402 18523
GA 355 - 10 10 145 890 53.5 1886 355 73 8402 18523
GA 355 - 13 13 189 731 43.9 1549 355 73 8402 18523
GA 400 - 7.5 7.5 109 1175 70.6 2490 400 74 8602 18964
GA 400 - 8.5 8.5 123 1109 66.6 2350 400 74 8602 18964
GA 400 - 10 10 145 1011 60.8 2142 400 74 8602 18964
GA 400 - 13 13 189 844 50.7 1788 400 74 8602 18964
GA 450 - 7.5 7.5 109 1298 78.0 2750 450 75 8702 19185
GA 450 - 8.5 8.5 123 1240 74.5 2628 450 75 8702 19185
GA 450 - 10 10 145 1144 68.8 2424 450 75 8702 19185
GA 450 - 13 13 189 960 57.7 2034 450 75 8702 19185
GA 500 - 7.5 7.5 109 1410 84.7 2988 500 76 8202 18082
GA 500 - 8.5 8.5 123 1347 80.9 2854 500 76 8202 18082
GA 500 - 10 10 145 1257 75.5 2664 500 76 8202 18082
GA 500 - 13 13 189 1068 64.2 2263 500 76 8202 18082
GA 500 figures are for medium voltage IP 23 motor. (1) Unit performance measure according to ISO 1217, (2) Noise level
Annex C, Edition 4 (2009), FAD is measured at the A-weighted emission sound pressure level at the work
Reference conditions: following working pressures: station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Absolute inlet pressure 1 bar (14.5 psi) • 7.5 bar variants at 7 bar Values determined according to noise level test code ISO
Intake air temperature 20°C (68°F) • 8.5 bar variants at 8 bar 2151 and noise measurement standard ISO 9614.
Cooling medium temperature 20°C (68°F) • 10 bar variants at 9.5 bar
• 13 bar variants at 12.5 bar (3) Water-cooled models
GA 500 figures are for medium voltage IP 23 motor. (1) Unit performance measure according to ISO 1217, 2) Noise level
Annex C, Edition 4 (2009), FAD is measured at the A-weighted emission sound pressure level at the work
Reference conditions: following working pressures: station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Absolute inlet pressure 1 bar (14.5 psi) • 100 psi variants at 100 psi Values determined according to noise level test code ISO
Intake air temperature 20°C (68°F) • 125 psi variants at 125 psi 2151 and noise measurement standard ISO 9614.
Cooling medium temperature 20°C (68°F) • 150 psi variants at 150 psi
• 200 psi variants at 193 psi (3) Water-cooled models
Compressor L W H
type mm inch mm inch mm inch
GA 355-500 A (LV and MV-IP23) 5855 230.5 2120 83.5 2500 98.4 H
GA 355-500 A (MV-IP55) 6055 238.4 2120 83.5 2500 98.4
GA 355-500 W (LV and MV-IP23) 4000 157.5 2120 83.5 2500 98.4
GA 355-500 W (MV-IP55) 4200 165.4 2120 83.5 2500 98.4
A = air-cooled LV = low voltage
W = water-cooled MV = medium voltage
W L
2935 0368 19 © 2017, Atlas Copco, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
OIL-INJECTED ROTARY
SCREW COMPRESSORS
GA 5-11 (5,5-11 kW/7,5-15 hp)
Highest reliability
The GA series is designed, manufactured and tested in
accordance with ISO 9001, ISO 14001 and ISO 1217, Ed. 4,
Annex C/E. Ensuring a long and trouble-free life at the
THE ULTIMATE
lowest operating cost, the GA contains the latest generation
of Atlas Copco’s innovative oil-injected screw element.
high-quality air, they keep the air network clean and your production up and running. • Extremely low losses of compressed air during load/unload cycle
thanks to minimized oil vessel size.
1
Optimized drive train
Unequaled reliability during the system’s lifetime
thanks to the belt-driven drive train developed in
accordance with the highest industry standards.
6
2
4
1
5 3 4
2 Elektronikon® controller
• Web based online compressor status viewer on new
Time proven Elektronikon® for remote monitoring using a standard
element Ethernet connection.
• The GA 5-11’s • The Elektronikon®’s monitoring features include new
compression element is combined with service and warning indications, error detection and
an IE3 efficiency motor, improved bearings compressor shut-down. The optional Elektronikon®
and seal arrangement resulting in minimized graphic controller provides further enhanced visual
energy costs. service indications and warnings.
• Fit for environments with ambient temperatures up to 46°C due
to superior component design.
• The Free Air Delivery is increased up to 8% and power consumption is
reduced by 7% thanks to optimized packaging and the state-of-the-art
compressor element.
6
Easy installation & servicing
3
• A true plug-and-play solution ready to be installed close
Integrated quality air solutions to the point of use.
• Protection of downstream air equipment in all working conditions: the integrated • Optionally, the system can be expanded with an integrated dryer,
dryer avoids condensation and corrosion in the network. air filters and a factory mounted 270L receiver (optional 500L).
• Additional energy savings with the dryer’s no-loss electronic drain. • Effortless transportation by forklift.
• Optional filters can be added to obtain air quality up to class 1 level (<0.01 ppm). • Standard equipped with a 3 meter power supply cable.
• Water separator included as standard. • Minimized service costs thanks to high-quality and easily
replaceable consumables with a long lifetime and easy servicing.
A STEP AHEAD IN MONITORING
AND CONTROLS
The next-generation Elektronikon® operating system offers a great variety of control and monitoring features Optional integrated compressor controller
to increase efficiency and reliability. The Elektronikon® controls the main drive motor and regulates system To reduce system pressure and energy consumption in installations of up to 4 (ES4i) or 6 (ES6i) compressors, the optional integrated
pressure within a predefined and narrow pressure band. compressor controller can be installed with a simple license.
Loaded
Loaded Unloaded
Unloaded Stopped
Time Time
Free online visualization Saved energy
Monitor your compressors over the Ethernet with the
new Elektronikon® controllers. Monitoring features
include warning indications, compressor shut-down and Saver cycle
maintenance scheduling, all possible with the free online Saver cycle technology reduces energy consumption. to monitor the required dew point suppression, the dryer saver
compressor status visualization. SMS service, trending The Elektronikon® is linked to both saver cycles: fan and dryer. cycle starts and stops the dryer when the compressor has
and remote history events are optional through the Monitoring the oil temperature, the fan saver cycle regulates stopped, minimizing energy use and protecting the air system
connectivity program. the fan and minimizes energy use. Using an ambient sensor from corrosion.
EXCELLENCE IN QUALITY AIR TAILORED TO YOUR NEEDS
Untreated compressed air contains moisture, aerosols and dirt particles that can damage your air system Some applications may need or benefit from additional options,
and contaminate your end product. The resulting maintenance costs can far exceed air treatment costs. more refined control and air treatment systems. To meet these needs,
Our compressors provide the clean, dry air that improves your system’s reliability, avoiding costly Atlas Copco has developed options and easily integrated compatible
downtime and production delays, and safeguarding the quality of your products. Clean, treated air also equipment providing the lowest cost compressed air.
reduces the risk of corrosion and leaks in your compressed air system, leading to substantial cost savings.
Furthermore, with leaks and energy waste minimized and the unsafe disposal of untreated condensate
eliminated, you can protect the environment and conform to stringent international regulations.
GA 5-11
Energy-saving contributors
ISO quality class* Dirt particle size Water pressure dew point** Oil concentration Saver Cycle Control
* The table values are maximum limits according to the respective ISO quality class.
** Water pressure dew point based on 100% RH at 20°C/68°F.
FLOW
GA 5-11 CHART TECHNICAL SPECIFICATIONS
GA 5-7-11
Weight (kg)
Working pressure Capacity FAD* Installed Noise
WorkPlace min-max motor power level**
10 COMPRESSOR WorkPlace WorkPlace Full Feature
21
2 17 TYPE
7 7
bar(e) psig l/s m3/h cfm kW hp dB(A) Floor-mounted Tank-mounted Floor-mounted Tank-mounted
3
1 50 Hz VERSION
23 GA 5 7.5 7.5 109 15.0 54.0 31.7 5.5 7.5 60 257 317 300 360
15 16 9
6 8.5 8.5 123 13.2 47.5 27.9 5.5 7.5 60 257 317 300 360
5 8
22 18 10 10 145 11.7 42.1 24.7 5.5 7.5 60 257 317 300 360
20
13 13 189 8.4 30.2 17.7 5.5 7.5 60 257 317 300 360
14
19 GA 7 7.5 7.5 109 21.0 78.5 46.0 7.5 10 61 270 330 315 375
11
8.5 8.5 123 19.6 70.6 41.5 7.5 10 61 270 330 315 375
GA 11 7.5 7.5 109 30.7 110.5 64.8 11 15 62 293 353 343 403
8.5 8.5 123 28.3 101.9 59.7 11 15 62 293 353 343 403
150 10.8 157 11.7 42.1 24.7 5.5 7.5 60 257 317 300 360
Wet compressed air High pressure refrigerant liquid
175 12.5 181 8.4 30.2 17.7 5.5 7.5 60 257 317 300 360
GA 7 100 7.4 107 21.0 76.6 44.3 7.5 10 61 270 330 315 375
Dry compressed air Low pressure refrigerant liquid
125 9.1 132 19.9 71.7 42.0 7.5 10 61 270 330 315 375
150 10.8 157 17.2 61.9 36.3 7.5 10 61 270 330 315 375
175 12.5 181 14.2 51.1 30.0 7.5 10 61 270 330 315 375
GA 11 100 7.4 107 30.4 109.4 64.1 11 15 62 293 353 343 403
125 9.1 132 27.0 97.2 57.0 11 15 62 293 353 343 403
150 10.8 157 24.9 89.6 52.5 11 15 62 293 353 343 403
175 12.5 181 22.0 79.2 46.4 11 15 62 293 353 343 403
Reference conditions:
Air flow Oil flow Refrigerant flow - Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20ºC, 68ºF.
7. Air-air heat exchanger 23. Air intake valve GA 5-7-11 pack (floor-mounted)
8. Water separator (pack only) H: 1240 mm
Floor-mounted Tank-mounted
2935 0875 46 © 2015, Atlas Copco Airpower NV, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
Oil-injected
COMPRESORES
DE TORNILLO
rotary screw
ROTATIVOS
compressors
CON INYECCIÓN
GA 7-75 VSD+ (7-75 kW/10-100 hp)
DE ACEITE
GA 7-75 VSD+ (7-75 kW/10-100 CV)
The new
revolutionary
compressor from
Atlas Copco
With its innovative vertical design, Atlas Copco’s
GA 7-75 VSD+ brings a game-changing revolution
in the compressor industry. It offers Variable
Speed Drive as standard, a compact motor and
footprint thanks to its in-house design and iPM
(Permanent Magnet) technology. The GA 7-75 VSD+
reduces energy consumption by on average
50%, with uptimes assured even in the harshest
operational conditions. The GA 7-75 VSD+ is the air
compressor of the future, designed in-house by
Atlas Copco. It will set a new standard for years to
come, positioning Atlas Copco as a leader in the
compressed air industry.
Innovative
Atlas Copco has turned the compressed air industry on its
head by redesigning the conventional layout of a typical air
compressor. Instead of the normal space-taking horizontal
design, the new GA 7-75 VSD+ has an upright, vertical, low
footprint layout. This saves valuable floor and work space,
eases maintenance access, accelerates manufacturing time,
and reduces the total cost of ownership for all customers.
Efficient
• On average 15% lower Specific Energy Requirement (SER)
than the current GA VSD models. Eco-efficient VSD+ reduces
energy consumption by on average 50% compared to the VSD
current idling models.
• On top of energy savings, Free Air Delivery (FAD)
increase of up to 12% over the range.
• Efficient fan motor below 37 kW (ERP 2015) reduces
electricity consumption and noise levels.
• IE4 motor efficiency (iPM), outperforming
IE3 efficiency levels.
Reliable
• Low maintenance: fewer components, increased uptime.
• Worry-free: the GA 7-75 VSD+ has been extensively
field-tested.
• Based on unique combination of proven technologies and
existing components, optimally brought together by
Atlas Copco’s unique experience and know-how.
Smart
• Elegant and revolutionary design.
• Extra compact footprint.
• Fewer components & few options: impressive list
of standard features.
• Ecological design, efficient material usage.
INSIDE THE INNOVATIVE GA 7-37 VSD+
DRIVE TRAIN
1
Interior Permanent Magnet (IPM) motor
• Very high efficiency: IE4. 4
• Compact, customized design for optimal cooling by oil.
• Designed in-house in Belgium.
• IP66 vs. IP55.
• No cooling air flow required.
• Oil-lubricated motor bearing: no (re)grease(ing), increased uptime.
2 7
Element
• Made by Atlas Copco.
• Robust and silent.
1
3 8
3
Direct drive
• Vertical design, fewer parts.
• Oil-cooled, pressure-tight.
• No gears or belts, no shaft seal.
• Compact: footprint down 60%.
4
Innovative fan
• Based on the newest technologies.
• In compliance with ERP2015 efficiency.
• Low noise levels.
5
Robust oil filter/separator
• Integrated bypass valve with the oil filter.
6 • Easy maintenance.
6
Electronic no-loss water drain
5 • Included as standard.
• Efficient removal of condensate without
loss of compressed air.
• Manual integrated bypass for effective condensate
removal in case of power failure.
7
Elektronikon® controller
9 • Integrated smart algorithms reduce system pressure
and energy consumption.
• Warning indications, maintenance scheduling
and online status visualization.
• Graphic display of key parameters (day, week, month)
and 32 language settings.
9 8
VSD+ cubicle Sentinel valve
• VSD+ superior to idling machines. • No inlet arrestor.
• Electrical components remain cool, • No blow off losses.
enhancing lifetime of components. • Maintenance free.
• Dedicated drive for iPM technology motors.
• 5% DC choke as standard.
• Heat dissipation of inverter in separate compartment.
INSIDE THE ROBUST GA 37-75 VSD+
2
8
DRIVE TRAIN
1
Interior Permanent Magnet (IPM) motor
• Oil cooled motor.
• Optimal cooling for all speeds and ambient conditions.
• Designed in-house in Belgium.
• Oil-lubricated motor bearing: no (re)grease(ing), increased uptime.
• IP66: pressure tight.
11 11
• Permanent magnets.
2
New compressor element
• New improved rotor profile.
• Reduced pressure losses.
• Optimized in and outlet portals.
3 4
Direct drive Inlet filter
• Vertical design, less parts. • Heavy duty.
• Oil-cooled, pressure-tight. • Maintenance every 4,000 hours.
• No gears or belts, no shaft seal. • Pressure drop indicator.
5
Radial fan
• Compact.
• Low noise level.
• High capacity for optimized cooling.
6
Classic cooler design
• Integrated water separation.
• Separate oil/air cooler.
• Easy access for maintenance.
7
Neos Inverter
• Cool cubicle: no cooling fans needed.
• Fully enclosed: no dust ingress possible.
8
9
6 Integrated dryer
• Extra compact footprint.
• Refrigerant R410A.
1
3 7
10
2
9
Elektronikon® controller
• Integrated smart algorithms reduce system
pressure and energy consumption.
• Monitoring features include warning indications,
maintenance scheduling and online visualization
11 of machine’s condition.
VSD+ cubicle
• VSD+ superior to idling machines.
10
• Electrical components remain cool,
enhancing lifetime of components. Sentinel valve
• Dedicated drive for iPM technology motors. • Optimizing the inlet flow of the air end.
• 5% DC choke as standard. • No blow off losses.
• Heat dissipation of inverter in separate compartment. • Full aluminum design: maintenance free.
VSD+ FOR 50% AVERAGE ENERGY SAVINGS
Atlas Copco’s GA Variable Speed Drive+ (VSD+) technology closely matches the air
demand by automatically adjusting the motor speed. Combined with the innovative
design of the iPM (Permanent Magnet) motor, this results in average energy savings of
50% and an average cut of 37% in the lifecycle cost of a compressor. VSD+ works with
permanent, in-house designed permanent magnet motors.
Time
Air demand Energy consumption
Fixed speed load/unload
Time
Air demand GA VSD+ energy consumption
50% SAVINGS
* Compared to fixed speed compressors, based on measurement performed by an independent energy audit agency.
A STEP AHEAD IN MONITORING
AND CONTROLS
The next-generation Elektronikon® operating system offers a wide variety of control and monitoring
features that allow you to increase your compressor’s efficiency and reliability. To maximize energy
efficiency, the Elektronikon® controls the main drive motor and regulates system pressure within
a predefined and narrow pressure band.
Week timer
An on-board clock enables timers to be set up to support any working scheme –
per day, per week or completely customizable to your specific situation and needs.
EXCELLENCE IN INTEGRATED AIR QUALITY
Untreated compressed air contains moisture and aerosols which increase the risk of corrosion and
compressed air system leaks. This can result in a damaged air system and contaminated end product.
Maintenance costs can far exceed air treatment costs. Our compressors provide the clean, dry air that
improves your system’s reliability, avoids costly downtime and production delays, and safeguards
the quality of your products.
* Unit performance measured according ISO 1217 ed. 4 2009, annex E, latest edition. FAD is measured at the following effective working pressures:
** Mean noise level measured at a distance of 1 m according to ISO 2151: 2004 using - 4 bar(e) (GA 18-37 VSD+)
ISO 9614/2 (sound intensity method); tolerance 3 dB(A). - 5.5 bar(e) (GA 7-15 VSD+)
- 7 bar(e)
Reference conditions: - 9.5 bar(e)
- Absolute inlet pressure 1 bar (14.5 psi). - 12.5 bar(e)
- Intake air temperature 20°C, 68°F. Maximum working pressure: 13 bar(e) (188 psig)
Options
Energy recovery DD+ filter
Dryer bypass FoodGrade oil
Main switch Elektronikon connectivity (SmartBox)
Freeze protection UD+ filter
H
Heavy duty inlet filter RXD oil
Pre-filter ES4i, ES6i
Tropical thermostat Transformer sales kit 200-230V / 500-575V
IT-ancillaries
D W
16
14
13
12
15* 9
7
8
17 10
11
1
1
6
4
2
3
* Unit performance measured according ISO 1217 ed. 4 2009, annex E, latest edition.
** Mean noise level measured at a distance of 1 m according to ISO 2151: 2004 using ISO 9614/2 (sound intensity method); tolerance 3 dB(A).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20°C, 68°F.
Options
Energy recovery
Pre-filter
Tropical thermostat
FoodGrade oil
UD+ filter
RXD oil
ES4i, ES6i
Transformer sales kit 200-230V / 500-575V
High ambient version
Power duct fan (standard on GA 75 VSD+, optional on GA 37-55 VSD+)
W
D
www.atlascopco.com
Oil-injected
rotary screw compressors
GA 11+-30 (60 Hz)
(11-30 kW / 15-40 hp)
Superior performance
State-of-the-art compression element coupled
with a maintenance-free gearbox.
100% continuous duty cycle.
Motor and drive train are greased for life to
avoid improper re-greasing.
Reduced electrical cubicle temperature doubles
electrical component lifetime.
Integrated dryer with heat exchanger and
integrated water separator for dry, quality air. State-of-the-art monitoring & control
Best-in-class low noise levels. High-tech Elektronikon® Touch controller with
high-definition color display, easy to use and
Supreme energy efficiency built to perform in the toughest conditions.
IE4 efficiency rated motor. Week timer, remote monitoring and
Free Air Delivery increased by 6-10%. maintenance scheduling.
Power consumption reduced by 3-8%. Built-in phase sequence relay for motor
control and protection.
Quick installation & maintenance Standard SMARTLINK remote monitoring to
Delivered plug & play. maximize air system performance and energy
Easy transportation. savings.
Main components are easily accessible. Optional multiple compressor control.
DIMENSIONS
159 cm
79 cm
126.7 cm
OPTIONS
Integrated filter Fan Saver Cycle Food-grade oil
Dryer bypass Compressor inlet pre-filter Roto-Xtend duty oil
Motor thermistors and Rain protection Energy recovery
anti-condensation heaters Lifting device Modulating control
Tropical thermostat Nema 4 & Nema 4X cubicle High ambient temperature versions
Freeze protection EQi central control license for 4 or 6 machines (55°C/131°F for pack, 50°C/122°F for FF)
Heavy duty air inlet filter (available on Elektronikon® Touch only) Dryer Save Cycle
TECHNICAL SPECIFICATIONS
Max. working pressure Weight
Installed Noise
Compressor Capacity FAD *
WorkPlace
WorkPlace Full motor power level** Work-
type WorkPlace Full
Feature Place
Feature
bar(e) psig bar(e) psig l/s m³/hr cfm kW hp dB(A) kg kg
GA 11+
100 7.4 107 7.2 104 39.4 141.8 83.5 11 15 68 411 451
125 9.1 132 8.9 128 34.3 123.5 72.7 11 15 68 411 451
150 10.8 157 10.6 153 30.4 109.4 64.4 11 15 68 411 451
175 12.6 183 12.3 179 26.1 94.0 55.3 11 15 68 411 451
GA 15+
100 7.4 107 7.2 104 51.9 186.8 110.0 15 20 69 427 483
125 9.1 132 8.9 128 46.1 166.0 97.7 15 20 69 427 483
150 10.8 157 10.6 153 40.5 145.8 85.8 15 20 69 427 467
175 12.6 183 12.3 179 36.0 129.6 76.3 15 20 69 427 467
GA 18+
100 7.4 107 7.2 104 63.6 229.0 134.8 18.5 25 69 428 484
125 9.1 132 8.9 128 56.6 203.8 119.9 18.5 25 69 428 484
150 10.8 157 10.6 153 51.2 184.3 108.5 18.5 25 69 428 484
175 12.6 183 12.3 179 45.3 163.1 96.0 18.5 25 69 428 484
GA 22+
100 7.4 107 7.2 104 73.8 265.7 156.4 22 30 67 487 545
125 9.1 132 8.9 128 69.2 249.1 146.6 22 30 67 487 545
150 10.8 157 10.6 153 63.0 226.8 133.5 22 30 67 487 545
175 12.6 183 12.3 179 58.1 209.2 123.1 22 30 67 487 545
GA 26+
100 7.4 107 7.2 104 85.3 307.1 180.7 26 35 68 490 548
125 9.1 132 8.9 128 80.6 290.2 170.8 26 35 68 490 548
150 10.8 157 10.6 153 72.7 261.7 154.0 26 35 68 490 545
175 12.6 183 12.3 179 66.1 238.0 140.1 26 35 68 490 545
GA 30
100 7.4 107 7.2 104 93.8 337.7 198.8 30 40 70 509 567
125 9.1 132 8.9 128 90.4 325.4 191.5 30 40 70 509 567
150 10.8 157 10.6 153 83.7 301.3 177.4 30 40 70 509 567
175 12.6 183 12.3 179 75.8 272.9 160.6 30 40 70 509 567
*
Unit performance measured according to ISO 1217, Annex C, latest edition.
**
Mean noise level measured according to ISO 2151/Pneuro/Cagi PN8NTC2 test code; tolerance 2 dB(A).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi)
- Intake air temperature 20°C/68°F
FAD is measured at the following working pressures:
- 7.5 bar versions at 7 bar
- 8 bar versions at 8 bar
- 10 bar versions at 9.5 bar
- 13 bar versions at 12.5 bar
Pressure dewpoint of integrated refrigerant dryer of GA 11+ - GA 15+ - GA 18+ - GA 22+ - GA 26+ - GA 30
at reference conditions 2°C to 3°C/36°F to 37°F.
2935 0827 40 © 2018 - Atlas Copco Airpower NV, Belgium. All rights reserved.
Designs and specifications are subject to change without notice or obligation.
Read all safety instructions in the manual before usage.
Oil-injected
rotary screw compressors
GA 11+-30 (50 Hz)
(11-30 kW / 15-40 hp)
Superior performance
State-of-the-art compression element coupled
with a maintenance-free gearbox.
100% continuous duty cycle.
Motor and drive train are greased for life to
avoid improper re-greasing.
Reduced electrical cubicle temperature doubles
electrical component lifetime.
Integrated dryer with heat exchanger and
integrated water separator for dry, quality air. State-of-the-art monitoring & control
Best-in-class low noise levels. High-tech Elektronikon® Touch controller with
high-definition color display, easy to use and
Supreme energy efficiency built to perform in the toughest conditions.
IE4 efficiency rated motor. Week timer, remote monitoring and
Free Air Delivery increased by 6-10%. maintenance scheduling.
Power consumption reduced by 3-8%. Built-in phase sequence relay for motor
control and protection.
Quick installation & maintenance Standard SMARTLINK remote monitoring to
Delivered plug & play. maximize air system performance and energy
Easy transportation. savings.
Main components are easily accessible. Optional multiple compressor control.
DIMENSIONS
159 cm
79 cm
126.7 cm
OPTIONS
Integrated filter Fan Saver Cycle Food-grade oil
Dryer bypass Compressor inlet pre-filter Roto-Xtend duty oil
Motor thermistors and Rain protection Energy recovery
anti-condensation heaters Lifting device Modulating control
Tropical thermostat Nema 4 & Nema 4X cubicle High ambient temperature versions
Freeze protection EQi central control license for 4 or 6 machines (55°C/131°F for pack, 50°C/122°F for FF)
Heavy duty air inlet filter (available on Elektronikon® Touch only) Dryer Save Cycle
TECHNICAL SPECIFICATIONS
Max. working pressure Weight
Installed Noise
Compressor Capacity FAD *
WorkPlace
WorkPlace Full motor power level** Work-
type WorkPlace Full
Feature Place
Feature
bar(e) psig bar(e) psig l/s m³/hr cfm kW hp dB(A) kg kg
GA 11+
7.5 7.5 109 7.3 105 37.2 133.9 78.8 11 15 68 411 451
8.5 8.5 116 8.3 120 35.7 128.5 75.6 11 15 68 411 451
10 10 145 9.8 141 32.3 116.3 68.4 11 15 68 411 451
13 13 189 12.8 185 26.7 96.1 56.6 11 15 68 411 451
GA 15+
7.5 7.5 109 7.3 105 51.7 186.1 109.5 15 20 69 427 483
8.5 8.5 116 8.3 120 46.1 166.0 97.7 15 20 69 427 483
10 10 145 9.8 141 41.1 148.0 87.1 15 20 69 427 467
13 13 189 12.8 185 36.9 132.8 78.2 15 20 69 427 467
GA 18+
7.5 7.5 109 7.3 105 62.6 225.4 132.6 18.5 25 69 428 484
8.5 8.5 116 8.3 120 58.2 209.5 123.3 18.5 25 69 428 484
10 10 145 9.8 141 51.3 184.7 108.7 18.5 25 69 428 484
13 13 189 12.8 185 45.8 164.9 97.0 18.5 25 69 428 484
GA 22+
7.5 7.5 109 7.3 105 72.6 261.4 153.8 22 30 67 487 545
8.5 8.5 116 8.3 120 69.7 250.9 147.7 22 30 67 487 545
10 10 145 9.8 141 62.6 225.4 132.6 22 30 67 487 545
13 13 189 12.8 185 55.1 198.4 116.8 22 30 67 487 545
GA 26+
7.5 7.5 109 7.3 105 87.2 313.9 184.8 26 35 68 490 548
8.5 8.5 116 8.3 120 83.7 301.3 177.4 26 35 68 490 548
10 10 145 9.8 141 76.5 275.4 162.1 26 35 68 490 545
13 13 189 12.8 185 66.2 238.3 140.3 26 35 68 490 545
GA 30
7.5 7.5 109 7.3 105 94.0 338.4 199.2 30 40 70 509 567
8.5 8.5 116 8.3 120 93.1 335.2 197.3 30 40 70 509 567
10 10 145 9.8 141 86.4 311.0 183.1 30 40 70 509 567
13 13 189 12.8 185 77.0 277.2 163.2 30 40 70 509 567
*
Unit performance measured according to ISO 1217, Annex C, latest edition.
**
Mean noise level measured according to ISO 2151/Pneuro/Cagi PN8NTC2 test code; tolerance 2 dB(A).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi)
- Intake air temperature 20°C/68°F
FAD is measured at the following working pressures:
- 7.5 bar versions at 7 bar
- 8 bar versions at 8 bar
- 10 bar versions at 9.5 bar
- 13 bar versions at 12.5 bar
Pressure dewpoint of integrated refrigerant dryer of GA 11+ - GA 15+ - GA 18+ - GA 22+ - GA 26+ - GA 30
at reference conditions 2°C to 3°C/36°F to 37°F.
2935 0826 40 © 2018 - Atlas Copco Airpower NV, Belgium. All rights reserved.
Designs and specifications are subject to change without notice or obligation.
Read all safety instructions in the manual before usage.
Oil-injected rotary
screw compressors
GA 15-26
GA 11+-30
Meeting your
every need for
compressed air
Atlas Copco's GA oil-injected screw
compressors provide you with industry-leading
performance and reliability and allow you to
benefit from a low cost of ownership. The GA
15-26 stands for a high quality, reliable air
compressor with the lowest initial investment.
The GA 11+-30 delivers top performance in the
fixed speed compressor market.
2 Advanced monitoring
• State-of-the-art monitoring using a simple
Ethernet connection, thanks to the Elektronikon®
with a built-in server.
• Service and warning indications, error detection
and compressor shut-down.
• Optional Elektronikon® graphic controller for
further enhanced remote monitoring features
and service time indications.
5 Easy installation
• A true plug-and-play solution, ideal machine
for installation companies and OEMs.
• Optional integrated dryer.
• Easy transportation by forklift.
• Remarkably compact footprint.
2 Electrical cubicle
• Reduced cubicle temperature doubles
the lifetime of the electrical components.
• Avoid damage with the electrical
cubicle’s standard phase sequence relay.
5 Energy-saving features
• Optional energy recovery system.
• Optional fan Saver Cycle, reducing
energy consumption.
Key features:
Key features:
• Automatic restart after voltage failure.
• Automatic restart after voltage failure.
• Delayed Second Stop function.
• Dual pressure set point.
• Option to upgrade to the advanced
Elektronikon® graphic controller. • More flexibility: four different week-schedules
that can be programmed for a period of
10 consecutive weeks.
• On-screen Delayed Second Stop function.
• Graphical indication service plan.
• Remote control and connectivity functions.
Loaded
Loaded Unloaded
Unloaded Stopped
Time Time
Saved energy
Applications
• Auxiliary or main heating of warehouses,
workshops…
• Industrial process heating
• Water heating for laundries, industrial cleaning
and sanitary facilities
• Canteens and large kitchens
• Food industry
• Chemical and pharmaceutical industries
• Drying processes
Integrated purity
Many Atlas Copco compressors (Full Feature option)
come with an integrated dryer that efficiently
removes moisture, aerosols and dirt particles to
protect your investment. This quality air expands the
life of equipment, increasing efficiency and ensuring
quality in your final product.
Full Feature unit with Class 2 integrated filter 2.4.2 1 micron +5°C/41°F +3ºC/37°F 0.1 ppm
Full Feature unit with Class 1 integrated filter 1.4.1 0.01 microns +3°C/37°F +3ºC/37°F 0.01 ppm
*
The table values are maximum limits according to the respective ISO quality class.
**
Water pressure dew point based on 100% RH at 20°C/68°F.
GA 15-26 GA 11+-30
Tropical thermostat • •
High ambient temperature versions (55°C/131°F for
pack, 50°C/122°F for FF)
• •
Wooden package • •
Food-grade oil • •
Modulating control • •
Energy recovery - •
Rain protection - •
*
Optional for GA 30. : Standard • : Optional - : Not available
GA 15 7.5 7.5 109 45.8 2.75 97.1 15 20 65 421 928 474 1045
8.5 8.5 123 42.0 2.52 88.9 15 20 65 421 928 474 1045
10.5 10.5 152 38.8 2.33 82.2 15 20 65 421 928 472 1041
GA 18 7.5 7.5 109 56.5 3.39 119.6 18.5 25 67 431 950 495 1091
8.5 8.5 123 53.8 3.23 114.0 18.5 25 67 431 950 495 1091
10.5 10.5 152 49.0 2.94 103.8 18.5 25 67 431 950 493 1087
13 13.0 189 40.7 2.44 86.2 18.5 25 67 431 950 491 1082
GA 22 7.5 7.5 109 65.1 3.91 138.0 22 30 68 440 970 495 1091
8.5 8.5 123 63.5 3.81 134.6 22 30 68 440 970 495 1091
10.5 10.5 152 53.3 3.20 112.9 22 30 68 440 970 493 1087
GA 26 7.5 7.5 109 72.9 4.37 154.4 30 40 69 500 1102 558 1230
8.5 8.5 123 68.1 4.09 144.2 30 40 69 500 1102 558 1230
10.5 10.5 152 61.5 3.69 130.3 30 40 69 500 1102 556 1226
Dimensions
L: 1225 mm/49”
W: 695 mm/27”
H: 1475 mm/58”
L W
GA 15 100 7.4 107 47.1 2.83 99.8 7.5 10 66 421 928 474 1045
125 9.1 132 42.4 2.54 89.8 7.5 10 66 421 928 474 1045
150 10.8 157 39.2 2.35 83.0 7.5 10 66 421 928 472 1041
175 12.5 181 30.3 1.82 64.2 7.5 10 66 421 928 470 1036
GA 18 100 7.4 107 56.9 3.41 120.5 11 15 68 431 950 495 1091
125 9.1 132 50.9 3.05 107.8 11 15 68 431 950 495 1091
150 10.8 157 48.0 2.88 101.7 11 15 68 431 950 493 1087
175 12.5 181 42.2 2.53 89.4 11 15 68 431 950 491 1082
GA 22 100 7.4 107 67.7 4.06 143.3 15 20 69 440 970 495 1091
125 9.1 132 60.6 3.64 128.4 15 20 69 440 970 495 1091
150 10.8 157 54.4 3.26 115.2 15 20 69 440 970 493 1087
175 12.5 181 49.0 2.94 103.8 15 20 69 440 970 491 1082
GA 26 100 7.4 107 74.4 4.46 157.6 18.5 25 70 500 1102 558 1230
125 9.1 132 69.5 4.17 147.2 18.5 25 70 500 1102 558 1230
150 10.8 157 62.8 3.77 133.0 18.5 25 70 500 1102 556 1226
175 12.5 181 57.1 3.43 120.9 18.5 25 70 500 1102 554 1221
*
Unit performance measured according to ISO 1217 ed. 4 2009, annex E, latest edition.
**
Mean noise level measured at a distance of 1 m according to ISO 2151: 2004 using ISO 9614/2 (sound intensity method); tolerance 3 dB(A).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20°C/68°F.
Air/oil mixture
Oil
Condensate
Dry air
Gaseous coolant
Liquid coolant
Water
bar(e) psi bar(e) psi l/s m³/min cfm kW hp dB(A) kg lbs kg lbs
GA 11+ 7.5 7.5 109 7.3 105 35.8 128.9 75.9 11 15 63 410 904 455 1003
8.5 8.5 116 8.3 120 33.8 121.7 71.7 11 15 63 410 904 455 1003
10 10 145 9.8 141 30.3 109.1 64.2 11 15 63 410 904 455 1003
13 13 189 12.8 185 25.2 90.7 53.4 11 15 63 410 904 455 1003
GA 15 + 7.5 7.5 109 7.3 105 46.9 168.8 99.4 15 20 64 420 926 470 1036
8.5 8.5 116 8.3 120 43.8 157.7 92.9 15 20 64 420 926 470 1036
10 10 145 9.8 141 39.8 143.3 84.4 15 20 64 420 926 470 1036
13 13 189 12.8 185 32.8 118.1 69.5 15 20 64 420 926 470 1036
GA 18 + 7.5 7.5 109 7.3 105 58.1 209.2 123.2 18.5 25 65 440 970 500 1102
8.5 8.5 116 8.3 120 54.3 195.5 115.1 18.5 25 65 440 970 500 1102
10 10 145 9.8 141 48.7 175.3 103.2 18.5 25 65 440 970 500 1102
13 13 189 12.8 185 41.1 148.0 87.1 18.5 25 65 440 970 500 1102
GA 22+ 7.5 7.5 109 7.3 105 68.2 245.5 144.6 22 30 66 455 1003 515 1135
8.5 8.5 116 8.3 120 64.5 232.2 136.7 22 30 66 455 1003 515 1135
10 10 145 9.8 141 58.1 209.2 123.2 22 30 66 455 1003 515 1135
13 13 189 12.8 185 50.7 182.5 107.5 22 30 66 455 1003 515 1135
GA 26 + 7.5 7.5 109 7.3 105 79.8 287.3 169.2 26 35 67 525 1157 595 1312
8.5 8.5 116 8.3 120 76.2 274.3 161.5 26 35 67 525 1157 595 1312
10 10 145 9.8 141 69.3 249.5 146.9 26 35 67 525 1157 595 1312
13 13 189 12.8 185 60.1 216.4 127.4 26 35 67 525 1157 595 1312
GA 30 7.5 7.5 109 7.3 105 90.0 324.0 190.8 30 40 68 540 1191 610 1345
8.5 8.5 116 8.3 120 86.4 311.0 183.2 30 40 68 540 1191 610 1345
10 10 145 9.8 141 79.8 287.3 169.2 30 40 68 540 1191 610 1345
13 13 189 12.8 185 68.7 247.3 145.6 30 40 68 540 1191 610 1345
10
20
16
8 8
2 7 9 22
14 9
3
1 21 17
19
13
15
5
11 18
12
bar(e) psi bar(e) psi l/s m³/min cfm kW hp dB(A) kg lbs kg lbs
GA 11+ 100 7.4 107 7.2 104 37.0 133.2 78.4 11 15 63 410 904 455 1003
125 9.1 132 8.9 128 32.0 115.2 67.8 11 15 63 410 904 455 1003
150 10.8 157 10.3 149 29.3 105.5 62.1 11 15 63 410 904 455 1003
175 12.5 181 12.3 178 25.3 91.1 53.6 11 15 63 410 904 455 1003
GA 15 + 100 7.4 107 7.2 104 48.3 173.9 102.4 15 20 64 420 926 470 1036
125 9.1 132 8.9 128 42.9 154.4 90.9 15 20 64 420 926 470 1036
150 10.8 157 10.3 149 39.4 141.8 83.5 15 20 64 420 926 470 1036
175 12.5 181 12.3 178 33.9 122.0 71.9 15 20 64 420 926 470 1036
GA 18 + 100 7.4 107 7.2 104 59.6 214.6 126.4 18.5 25 66 440 970 500 1102
125 9.1 132 8.9 128 53.3 191.9 113.0 18.5 25 66 440 970 500 1102
150 10.8 157 10.3 149 47.8 172.1 101.3 18.5 25 66 440 970 500 1102
175 12.5 181 12.3 178 42.5 153.0 90.1 18.5 25 66 440 970 500 1102
GA 22+ 100 7.4 107 7.2 104 70.3 253.1 149.0 22 30 67 455 1003 515 1135
125 9.1 132 8.9 128 62.9 226.4 133.3 22 30 67 455 1003 515 1135
150 10.8 157 10.3 149 56.9 204.8 120.6 22 30 67 455 1003 515 1135
175 12.5 181 12.3 178 52.3 188.3 110.9 22 30 67 455 1003 515 1135
GA 26 + 100 7.4 107 7.2 104 81.2 292.3 172.1 26 35 67 525 1157 595 1312
125 9.1 132 8.9 128 74.1 266.8 157.1 26 35 67 525 1157 595 1312
150 10.8 157 10.3 149 67.4 242.6 142.9 26 35 67 525 1157 595 1312
175 12.5 181 12.3 178 60.7 218.5 128.7 26 35 67 525 1157 595 1312
GA 30 100 7.4 107 7.2 104 90.1 324.4 191.0 30 40 68 540 1191 610 1345
125 9.1 132 8.9 128 84.1 302.8 178.3 30 40 68 540 1191 610 1345
150 10.8 157 10.3 149 77.1 277.6 163.5 30 40 68 540 1191 610 1345
175 12.5 181 12.3 178 70.1 252.4 148.6 30 40 68 540 1191 610 1345
*
Unit performance measured according to ISO 1217, Annex C, latest edition.
**
Mean noise level measured according to ISO 2151/Pneuro/Cagi PN8NTC2 test code; tolerance 2 dB(A).
Reference conditions:
• Absolute inlet pressure 1 bar (14.5 psi)
• Intake air temperature 20°C/68°F
Pressure dew point of integrated refrigerant dryer of GA 11+ - GA 15+ - GA 18+ - GA 22+ - GA 26+ - GA 30 at
reference conditions 2°C to 3°C/36°F to 37°F.
Dimensions
H
H: 1475 mm/58”
GA 11+ - GA 22+ L: 1255 mm/49”
W: 692 mm/27”
H: 1475 mm/58”
GA 26+ - GA 30 L: 1255 mm/49”
W: 865 mm/34”
W
L
2935 0812 42 © 2017, Atlas Copco Airpower NV, Belgium. All rights reserved.
Designs and specifications are subject to change without notice or obligation.
Read all safety instructions in the manual before usage.
OIL-INJECTED ROTARY SCREW
COMPRESSORS
GA 30+-90/GA 37-90 VSD
(30-90 kW/40-125 hp)
GA VSD: ULTIMATE ENERGY SAVER
The ultimate smart solution, driven by efficiency Unique integrated Variable Speed Drive (VSD) technology for on average 35%
energy savings.
Atlas Copco’s GA 30+-90 compressors bring you outstanding sustainability, reliability and performance, while minimizing the total cost of Industry-leading operating turndown range and flexible pressure selection: 4-13 bar.
Start under system pressure due to special VSD motor, no idling time.
ownership. A choice of three premium compressor types (GA VSD, GA+ and GA) provides you with the compressed air solution that perfectly
Integrated Dryer Saver Cycle saves up to 60% of the dryer’s electrical consumption.
matches your requirements with clear value propositions. Built to perform even in the harshest environments, these compressors keep your Smart Elektronikon® graphic compressor controller with high-definition color display
working to a set point minimizes pressure drops.
production running efficiently.
minimize operating cost. The integrated dryer R410A reduces ozone IE2 High Efficiency motor in combination with efficient element.
train accessibility.
pressure drops.
Smart Elektronikon® graphic compressor controller with high-definition
color display.
Outstanding performance is ensured by design, with IE2 motors mechanical separator. The three-stage air/oil separation Premium quality at the lowest initial investment.
in combination with Atlas Copco’s highly efficient element and an ensures low oil consumption. All electrical cubicles are in Efficient environmentally-friendly R410A integrated dryer reduces
oversized cooling arrangement resulting in significant energy overpressure, preventing electrically conductive dust, thus footprint and pressure drops.
savings. Internal pressure drops from inlet to discharge are increasing the lifetime of electrical components. Ensured efficiency of Elektronikon® controller with connectivity.
Variable Speed Drive (VSD) technology in the compressed air industry. VSD leads to major energy savings, while protecting
AMPS STATUS OF GENERAL LOAD - NO LOAD COMPRESSOR
the environment for future generations. Thanks to continual investments in this technology, Atlas Copco offers the widest
55.00
range of integrated VSD compressors on the market. 50.00
45.00
40.00
35.00
Integrated Elektronikon® Graphic controller controls the motor speed and high efficiency frequency inverter. 15.00
10.00
No wasted idling times or blow-off losses in normal operation.
5.00 Unload and blow-off losses
Compressor can start/stop under full system pressure without the need to unload with special VSD motor.
Time
Eliminates peak current penalty during start-up.
Minimizes system leakage due to a lower system pressure.
EMC Compliance to directives (2004/108/EG).
IME WHAT IS UNIQUE ABOUT THE INTEGRATED ATLAS COPCO GA VSD?
NO IDLINGT
2 Flexible pressure selection from 4 to 13 bar with 7 A highly efficient frequency converter in a cool
electronic gearing reduces electricity costs. overpressure cubicle ensures stable operation in high
ambient temperatures up to 50°C/122°F*.
3 Special electric motor specifically designed for * Standard up to 46°C/114.8°F.
VSD operation (inverter duty motor). Bearings are
protected against induced bearing currents. Both motor 8 No ‘speed windows’ that can jeopardize the
and converter are perfectly tuned for highest efficiency energy savings and the stable net pressure. Turndown
Air demand Energy consumption Time Air demand GA VSD energy consumption Time
across the entire speed range. capability of the compressor is maximized to 80-85%.
Fixed speed load/unload
4 Electric motor specifically designed for low 9 The cubicle cooling booster increases the lifetime
In almost every production environment, air demand fluctuates depending on different factors such as the time of operating speeds with clear attention to motor cooling of electrical components due to a cool cubicle in
the day, week or even month. Extensive measurements and studies of compressed air demand profiles show that and compressor cooling requirements. overpressure and reduced dust ingress.
many compressors have substantial variations in air demand.
5 All Atlas Copco GA VSD compressors are EMC tested 10 Net pressure band is maintained within 0.10 bar,
and certified. External sources do not influence compressor 1.5 psi.
operation, nor does the compressor affect the operation of
other instruments via emissions or via the power supply line.
ON AVERAGE 35% ENERGY SAVINGS
Atlas Copco’s GA VSD technology closely follows the air demand by Operating range Non-integrated Atlas Copco Combined motor/converter efficiency
automatically adjusting the motor speed. This results in on average solution integrated solution
35% energy savings. The lifecycle cost of a compressor can be cut by 100%
an average of 22%. In addition, lowered system pressure with GA
VSD dramatically minimizes energy use across your production.
1
Maintenance-free drive system
100% maintenance-free; totally enclosed and protected against dirt and dust.
10
Suitable for harsh environments.
Integrated highly efficient
High-efficiency drive arrangement; no coupling or slippage losses.
R410A dryer
Standard up to 46˚C/115˚F and for high ambient version 55˚C/131˚F.
Excellence in air quality.
to traditional dryers.
Zero ozone depletion.
to Class 1.4.1.
9
IE2 High Efficiency electrical motors
8
IP55, insulation Class F, B rise.
9
Non-drive side bearing greased for life.
7
Electronic no-loss water drain
5 (optional)
Ensures constant removal of condensate.
Separate oversized oil cooler
6
Manual integrated bypass for effective condensate
and aftercooler
High efficient.
Integrated with compressor’s Elektronikon® with
No consumables.
No loss of compressed air.
your compressor’s efficiency and reliability. To maximize energy efficiency, the Elektronikon® controls the main drive motor and regulates energy consumption in installations of up to 4 (ES4i) or 6 (ES6i) compressors.
1
2
Average Pressure
3 1 2 3 Average Pressure
Min. System Pressure Min. System Pressure
Compressors
The Elektronikon® continuously monitors critical parameters. Monitoring features include service and warning indications, error detection, compressor shut-down and
maintenance scheduling.
IMPROVED USER-FRIENDLINESS
3.5-inch high-definition color display with clear pictograms
On-screen Delayed Second Stop function and VSD
DUAL PRESSURE SET POINT & DELAYED SECOND STOP
and extra 4th LED indicator for service. savings indication.
Most production processes create fluctuating levels of demand use times. In addition, the sophisticated Delayed Second Stop
Graphical display of key parameters (day, week, month) and
Graphical indication Serviceplan, remote control and
which, in turn, can create energy waste in low use periods. (DSS) runs the drive motor only when needed. As the desired
32 language settings. connectivity functions.
Using either the standard or graphic Elektronikon® controller, you system pressure is maintained while the drive motor’s run time is
Internet-based compressor visualization using a simple
Software upgrade available to control up to 6 compressors
can manually or automatically create two different system minimized, energy consumption is kept at a minimum.
Ethernet connection. by installing the optional integrated compressor controller.
pressure bands to optimize energy use and reduce costs at low
Power Power
Loaded Loaded
Unloaded Unloaded
ONLINE & MOBILE MONITORING Stopped
Time Time
Monitor your compressors over the Ethernet with the new
Saved energy
Elektronikon® controller. Monitoring features include warning
indications, compressor shut-down and maintenance scheduling.
The Atlas Copco App is available for iPhone/Android phones as
INTEGRATED DRYER SAVER CYCLE
well as iPad and Android tablets. It allows fingertip monitoring
of your compressed air system through your own secured network. Saver Cycle technology reduces the energy consumption of dew point suppression, the Elektronikon® starts and stops the
the integrated refrigerant dryers with the fan in light load dryer and the fan, minimizing energy use and protecting the air
applications. Using an ambient sensor to monitor the required system from corrosion.
Excellence in integrated air quality WorkPlace: Compressed air at the point of use
Untreated compressed air contains moisture, aerosols and dirt particles that can damage your air system and contaminate your end product, With the industry-leading low noise operation and integration of air and condensate treatment equipment, the GA+ offers complete versatility
resulting in risk of corrosion and compressed air system leaks. Maintenance costs can far exceed air treatment costs. Our compressors provide the for your production. The compressor’s integrated design allows it to be placed on the production floor, creating substantial energy savings for
clean, dry air that improves your system’s reliability, avoids costly downtime and production delays, and safeguards the quality of your products. your business.
The GA+ is delivered ready for use – minimizing production downtime and reducing installation costs.
Filtration equipment is integrated – reducing the need for costly external piping and minimizing pressure drops.
E
ZERO OZON N
DEPLETIO
ON AVERAGE 50% ENERGY SAVINGS WITH
R410A INTEGRATED DRYERS
Use of energy-efficient refrigerant R410A reduces operating costs.
410A refrigerant reduces global warming potential by an average
R
of 50%.
Environmentally-friendly characteristics; zero ozone depletion.
Unique Saver Cycle Control, with ambient temperature sensor and
based on dryer load and relative humidity of compressed air, saves
energy at partial load.
Heat exchanger cross-flow technology with low pressure drop.
Zero waste of compressed air thanks to no-loss condensate drain.
Pressure dew point of 3°C (100% relative humidity at 20°C).
INTEGRATED PURITY
The optional DD/PD filters and integrated refrigerant air dryer downstream equipment, increasing efficiency and ensuring REDUCED ENERGY AND MAINTENANCE COSTS
(IFD) efficiently remove moisture, aerosols and dirt particles to quality of your final product.
With less external piping, the GA+ minimizes pressure drop across the system which can reduce energy costs.
protect your investment. This air quality prolongs the life of
The filtration system produces clean air to prevent network corrosion – minimizing energy, repair and maintenance costs.
The GA+ operates at the lowest possible system pressure to reduce energy costs thanks to the Elektronikon® advanced
monitoring system.
ISO QUALITY CLASS* DIRT PARTICLE SIZE WATER PRESSURE DEW POINT** OIL CONCENTRATION
1.4.1 0.01 microns +3ºC, 37ºF 0.01 ppm Oil carryover contained in condensate can harm the environment.
* The table values reflect the maximum limits according to the temperature ISO gravity class.
Treated condensate protects water, wildlife and ecosystems.
Atlas Copco has developed options and easily integrated compatible equipment.
F
Freeze protection
Pre-filter
Advanced monitoring C
Vp
Protection Electronic water drain (EWD)
Rain protection -
Public works Main power isolator switch
A Intake air D Wet compressed air
ES 100 relays***
AIRconnect FIXED
B SPEED: GA + & GAE
Air/oil mixture Condensate
Elektronikon® Graphic upgrade (only for GA 37 to GA 75) - C Oil F Dried compressed air
ES4i/ES6i (for Elektronikon® Graphic)
Communication F
Digital I/O expansion module
D W
Technical specifications GA 30+-90 (50 Hz versions) Technical specifications GA 30+-90 (60 Hz versions)
Max. working pressure Installed motor Noise Weight Weight WorkPlace Max. working pressure Installed motor Noise Weight Weight WorkPlace
Capacity FAD* COMPRESSOR Pressure Capacity FAD*
COMPRESSOR Pressure WorkPlace power level** WorkPlace Full Feature WorkPlace power level** WorkPlace Full Feature
TYPE variant TYPE variant
bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs bar(e) psig l/s m3/min cfm kW hp dB(A) kg lbs kg lbs
GA 30+ 7.5 7.5 109 99 5.9 209 30 40 65 917 2022 998 2200 GA 30+ 100 7.4 107 100 6.0 212 30 40 65 917 2022 998 2200
8.5 8.5 123 90 5.4 191 30 40 65 917 2022 998 2200 125 9.1 132 91 5.5 192 30 40 65 917 2022 998 2200
10 10.0 145 82 4.9 175 30 40 65 917 2022 998 2200 150 10.8 157 82 4.9 174 30 40 65 917 2022 998 2200
13 13.0 189 71 4.3 151 30 40 65 917 2022 998 2200 175 12.5 181 75 4.5 158 30 40 65 917 2022 998 2200
GA 37 7.5 7.5 109 115 6.9 243 37 50 69 920 2028 1005 2216 GA 37 100 7.4 107 116 7.0 246 37 50 69 920 2028 1005 2216
8.5 8.5 123 106 6.4 225 37 50 69 920 2028 1005 2216 125 9.1 132 108 6.5 229 37 50 69 920 2028 1005 2216
10 10.0 145 100 6.0 213 37 50 69 920 2028 1005 2216 150 10.8 157 96 5.8 204 37 50 69 920 2028 1005 2216
13 13.0 189 81 4.9 172 37 50 69 920 2028 1005 2216 175 12.5 181 87 5.2 185 37 50 69 920 2028 1005 2216
GA 37+ 7.5 7.5 109 122 7.3 258 37 50 65 1002 2209 1087 2396 GA 37+ 100 7.4 107 120 7.2 255 37 50 65 1002 2209 1087 2396
8.5 8.5 123 118 7.1 250 37 50 65 1002 2209 1087 2396 125 9.1 132 111 6.7 234 37 50 65 1002 2209 1087 2396
10 10.0 145 102 6.1 216 37 50 65 1002 2209 1087 2396 150 10.8 157 100 6.0 212 37 50 65 1002 2209 1087 2396
13 13.0 189 85 5.1 180 37 50 65 1002 2209 1087 2396 175 12.5 181 91 5.4 192 37 50 65 1002 2209 1087 2396
GA 45 7.5 7.5 109 137 8.2 291 45 60 72 994 2191 1079 2379 GA 45 100 7.4 107 139 8.3 294 45 60 72 994 2191 1079 2379
8.5 8.5 123 127 7.6 268 45 60 72 994 2191 1079 2379 125 9.1 132 128 7.7 271 45 60 72 994 2191 1079 2379
10 10.0 145 117 7.0 248 45 60 72 994 2191 1079 2379 150 10.8 157 118 7.1 250 45 60 72 994 2191 1079 2379
13 13.0 189 102 6.1 217 45 60 72 994 2191 1079 2379 175 12.5 181 105 6.3 222 45 60 72 994 2191 1079 2379
GA 45+ 7.5 7.5 109 149 8.9 315 45 60 66 1070 2359 1160 2557 GA 45+ 100 7.4 107 146 8.8 310 45 60 66 1070 2359 1160 2557
8.5 8.5 123 139 8.3 295 45 60 66 1070 2359 1160 2557 125 9.1 132 134 8.0 284 45 60 66 1070 2359 1160 2557
10 10.0 145 128 7.7 270 45 60 66 1070 2359 1160 2557 150 10.8 157 126 7.5 266 45 60 66 1070 2359 1160 2557
13 13.0 189 106 6.4 225 45 60 66 1070 2359 1160 2557 175 12.5 181 111 6.7 236 45 60 66 1070 2359 1160 2557
GA 55 7.5 7.5 109 169 10.1 359 55 75 69 1329 2930 1429 3150 GA 55 100 7.4 107 174 10.5 369 55 75 69 1329 2930 1429 3150
8.5 8.5 123 159 9.5 337 55 75 69 1329 2930 1429 3150 125 9.1 132 154 9.3 327 55 75 69 1329 2930 1429 3150
10 10.0 145 148 8.9 313 55 75 69 1329 2930 1429 3150 150 10.8 157 142 8.5 300 55 75 69 1329 2930 1429 3150
13 13.0 189 126 7.6 267 55 75 69 1329 2930 1429 3150 175 12.5 181 128 7.7 272 55 75 69 1329 2930 1429 3150
GA 55+ 7.5 7.5 109 180 10.8 381 55 75 66 1458 3214 1558 3435 GA 55+ 100 7.4 107 181 10.9 384 55 75 67 1458 3214 1558 3435
8.5 8.5 123 172 10.3 364 55 75 66 1458 3214 1558 3435 125 9.1 132 163 9.8 345 55 75 67 1458 3214 1558 3435
10 10.0 145 153 9.2 324 55 75 66 1458 3214 1558 3435 150 10.8 157 136 8.3 292 55 75 67 1458 3214 1558 3435
GA 75 7.5 7.5 109 226 13.6 478 75 100 66 1371 3023 1491 3287 GA 75 100 7.4 107 225 13.5 476 75 100 67 1371 3023 1491 3287
8.5 8.5 123 209 12.5 444 75 100 73 1371 3023 1491 3287 125 9.1 132 198 11.9 424 75 100 73 1371 3023 1491 3287
10 10.0 145 190 11.4 401 75 100 73 1371 3023 1491 3287 150 10.8 157 186 11.2 401 75 100 73 1371 3023 1491 3287
13 13.0 189 162 9.7 344 75 100 73 1371 3023 1491 3287 175 12.5 181 169 10.1 358 75 100 73 1371 3023 1491 3287
GA 75+ 7.5 7.5 109 247 14.8 523 75 100 68 1525 3362 1645 3627 GA 75+ 100 7.4 107 247 14.8 523 75 100 69 1525 3362 1645 3627
8.5 8.5 123 232 13.9 492 75 100 68 1525 3362 1645 3627 125 9.1 132 226 13.6 479 75 100 69 1525 3362 1645 3627
10 10.0 145 207 12.4 439 75 100 68 1525 3362 1645 3627 150 10.8 157 201 12.1 426 75 100 69 1525 3362 1645 3627
13 13.0 189 173 10.4 367 75 100 68 1525 3362 1645 3627 175 12.5 181 179 10.7 379 75 100 69 1525 3362 1645 3627
GA 90 7.5 7.5 109 281 16.9 596 90 125 73 1525 3362 1645 3627 GA 90 100 7.4 107 284 17.0 602 90 125 74 1525 3362 1645 3627
8.5 8.5 123 275 16.5 582 90 125 73 1525 3362 1645 3627 125 9.1 132 262 15.7 555 90 125 74 1525 3362 1645 3627
10 10.0 145 250 15.0 529 90 125 73 1525 3362 1645 3627 150 10.8 157 245 14.7 519 90 125 74 1525 3362 1645 3627
13 13.0 189 216 13.0 458 90 125 73 1525 3362 1645 3627 175 12.5 181 224 13.4 475 90 125 74 1525 3362 1645 3627
* Unit performance measured according to ISO 1217, Annex C, Edition 4 Please refer to the footnotes, reference conditions and FAD details of the 50 Hz versions.
Reference conditions:
Absolute inlet pressure 1 bar (14.5 psi)
Intake air temperature 20°C, 68°F Technical specifications GA 37-90 VSD (50/60 Hz versions)
FAD is measured at the following working pressures:
7.5 bar versions at 7 bar
Capacity FAD* Weight
8.5 bar versions at 8 bar
Working Installed motor Noise Weight
COMPRESSOR WorkPlace
10 bar versions at 9.5 bar
pressure power level** WorkPlace
TYPE l/s m3/min cfm Full Feature
13 bar versions at 12.5 bar
** A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB). bar(e) psig min max min max min max kW hp dB(A) kg lbs kg lbs
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
GA 37 VSD 4 58 26.0 124 1.6 7.4 55 263 37 50 66/67 1142 2518 1227 2705
Pressure dew point of integrated refrigerant dryer at reference conditions: 2ºC to 3ºC, 36°F to 37°F.
7 102 26.0 123 1.6 7.4 55 260 37 50 66/67 1142 2518 1227 2705
10 145 25.8 107 1.5 6.4 55 226 37 50 66/67 1142 2518 1227 2705
13 189 40.3 87 2.4 5.2 85 185 37 50 66/67 1142 2518 1227 2705
GA 45 VSD 4 58 26.0 146 1.6 8.8 55 310 45 60 69/72 1200 2646 1290 2844
7 102 26.0 145 1.6 8.7 55 307 45 60 69/72 1200 2646 1290 2844
10 145 25.8 128 1.5 7.7 55 271 45 60 69/72 1200 2646 1290 2844
13 189 40.3 107 2.4 6.4 85 226 45 60 69/72 1200 2646 1290 2844
GA 55 VSD 4 58 32.4 197 1.9 11.8 69 418 55 75 69/72 1480 3263 1580 3483
7 102 26.0 175 1.6 10.5 55 371 55 75 69/72 1480 3263 1580 3483
10 145 25.4 155 1.5 9.3 54 328 55 75 69/72 1480 3263 1580 3483
13 189 37.0 129 2.2 7.7 78 273 55 75 69/72 1480 3263 1580 3483
GA 75 VSD 4 58 37.8 246 2.3 14.9 80 525 75 100 69/70 1632 3598 1752 3862
7 102 37.4 246 2.2 14.8 79 521 75 100 69/70 1632 3598 1752 3862
10 145 48.1 216 2.9 13.0 102 458 75 100 69/70 1632 3598 1752 3862
13 189 58.3 180 3.5 10.8 124 381 75 100 69/70 1632 3598 1752 3862
GA 90 VSD 4 58 37.0 290 2.2 17.4 78 614 90 125 73/74 1632 3598 1752 3862
7 102 39.4 289 2.4 17.3 84 612 90 125 73/74 1632 3598 1752 3862
10 145 48.3 254 2.9 15.2 102 536 90 125 73/74 1632 3598 1752 3862
13 189 59.4 212 3.6 12.5 126 443 90 125 73/74 1632 3598 1752 3862
* Unit performance measured according to ISO 1217, Annex E, Edition 4
Maximum working pressure for VSD machines: 13 bar(e) (188 psig)
2935 0814 42 © 2016, Atlas Copco Airpower NV, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
Oil-injected
rotary screw
compressors
GA 75-110 VSD+ (75-110 kW/100-150 hp)
Innovative
Atlas Copco has turned the compressed air industry on its
head by redesigning the conventional layout of a typical air
compressor. Instead of the normal space-taking horizontal
design, the new GA 75-110 VSD+ has an upright, vertical,
low-footprint layout. This saves valuable floor and work space,
eases maintenance access, accelerates manufacturing time,
and reduces the total cost of ownership for all customers.
Efficient
• On average 8% lower Specific Energy Requirement (SER)
than the current GA VSD models. Eco-efficient VSD+ reduces
energy consumption by on average 50% compared to the
current idling models.
• On top of energy savings, Free Air Delivery (FAD)
increase of up to 6% over the range. VSD
The new • The iPM motor outperforms IE4 efficiency levels.
revolutionary
compressor from Reliable
Atlas Copco • Completely enclosed frequency drive and drive train
ensure performance even in the harshest environments.
• Based on unique combination of proven technologies and
Atlas Copco’s GA 75-110 VSD+ brings a game- existing components, optimally brought together by Atlas
changing revolution in the compressor industry. It Copco’s experience and know-how.
offers Variable Speed Drive as standard, a powerful
motor and a compact footprint thanks to its in-house
designed iPM (Interior Permanent Magnet) motor
technology. The GA 75-110 VSD+ reduces energy Smart
• Easy monitoring and maintenance thanks to the
consumption by on average 50%, with uptimes
Elektronikon® Graphic controller.
assured even in the harshest operational conditions.
• Maintenance notifications and machine status available
The GA 75-110 VSD+ is the air compressor of the via SMARTLINK e-mail or text messages.
future, reducing electricity costs to a minimum • Customized reports on the energy performance of your
and maximizing uptime. It fits even in the smallest machine, in compliance with ISO 50001.
compressor room. The GA 75-110 VSD+ will set a
new standard for years to come, positioning Atlas
Copco as a leader in the compressed air industry.
2 - Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors - 3
7
INSIDE THE POWERFUL GA 75-110 VSD +
Innovative Neos inverter
• Atlas Copco’s in-house designed inverter,
now also controls iPM motors.
• IP5x protection.
• Robust aluminum enclosure for trouble-
free operation in the harshest conditions.
• Fewer components: compact, simple and
user-friendly.
1
Interior Permanent Magnet (iPM) motor
• Premium efficiency that exceeds IE4 levels.
• Compact, customized design for optimal cooling by oil.
• Designed in-house in Belgium.
• IP66 versus IP55.
• No cooling air flow required.
• Oil-lubricated motor bearing: no (re)grease(ing) and
5 5
increased uptime.
2 6 8 6
New compressor element
• Improved efficiency.
9
• Made by Atlas Copco.
• Robust and silent.
1 9
1
10 Elektronikon® Graphic controller
3
4 4
7 • Integrated smart algorithms reduce system pressure
Direct drive and energy consumption.
2
4
Inlet filter
• Heavy duty.
• Pressure drop indicator.
5
Cooling fan 6 8 10
• Already compliant with Classic cooler design Integrated dryer VSD+ Neos cubicle
future ERP2020 efficiency. • Ensures excellence in air quality. • VSD+ is superior to idling machines.
• Integrated water separation.
• Optimized, application-specific • Incorporates optional UD+ filter to meet ISO • Electrical components remain cool, enhancing
• Separate oil/air cooler.
design results in low noise 8573.1 Quality Class 1.4.2. lifetime of components.
and high efficiency. • Easy access for maintenance.
• True plug-and-play design eliminates cost of • Dedicated Neos drive for iPM technology motors.
installing a separate dryer. • Heat dissipation of inverter in separate compartment.
4 - Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors - 5
In almost every production environment, air demand fluctuates depending on different factors such
as the time of the day, week or even month. Extensive measurements and studies of compressed air
demand profiles show that many compressors have substantial variations in air demand.
Time
Air demand Energy consumption
Fixed speed load/unload
Time
Air demand GA VSD+ energy consumption
50% SAVINGS
CONNECT
Dual Pressure Set Point SMARTLINK*: Data Monitoring Program
Create two different system pressure bands to reduce • Remote monitoring that helps you optimize your compressed air system and save energy and costs.
energy use and costs during fluctuating demand. • Provides a complete insight in your compressed air network.
• Anticipates potential problems by warning you up-front.
Integrated Saver Cycles * Please contact your local sales representative for more information.
Fan Saver Cycle reduces energy consumption
by switching off the fan in light load applications.
Timer
A built-in clock supports any working
schedule – per day, per week or
customized to your specific
EXCELLENCE IN INTEGRATED AIR QUALITY
situation and needs.
Untreated compressed air contains moisture and aerosols which increase the risk of corrosion and
compressed air system leaks. This can result in a damaged air system and contaminated end products.
Maintenance costs can far exceed air treatment costs. The GA 75-110 VSD+ provides the clean, dry air that
improves your system’s reliability, avoids costly downtime and production delays, and safeguards
the quality of your products.
8 - Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors - 9
TECHNICAL SPECIFICATIONS GA 75-110 VSD+ FLOW CHART GA 75-110 VSD+
Weight
Weight
Working pressure Capacity FAD* (min-max) Installed motor power Noise level** WorkPlace
Type WorkPlace
Full Feature
Reference conditions: 14
- Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20°C/68°F.
Options 1
Energy recovery
Pre-filter
Tropical thermostat
FoodGrade oil 4
UD+ filter
RXD oil
ES4i, ES6i
Transformer sales kit 200-230V/500-575V
High ambient version 7
Power duct fan
2 5
6
10 - Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors Atlas Copco GA 75-110 VSD+ oil-injected rotary screw compressors - 11
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the environment and the people around us.
We make performance stand the test of time. This is what we call – Sustainable Productivity.
2935 0817 42 © 2017, Atlas Copco Airpower NV, Belgium. All rights reserved.
Designs and specifications are subject to change without notice or obligation.
Read all safety instructions in the manual before usage.
OIL-INJECTED ROTARY
SCREW COMPRESSORS
GA 160+-315 (VSD) (160-315 kW/200-350 hp)
HIGHEST RELIABILITY, LOWEST
OPERATING COSTS
The shortest route to maximize your profitability is to minimize your operational cost. As energy consumption
is the major factor (up to 70%) of a compressor’s lifecycle cost, the Atlas Copco GA 160+-315 (VSD) compressors
are designed to help you achieve significant savings. The compressors provide high-quality compressed
air to meet your requirements even in the most demanding applications.
Mining industry
• Years of experience with thousands of compressors running
around the world.
• High product reliability with maximum uptime even
in harsh conditions.
• Strong global support network to provide 24/7 assistance
even in remote locations.
Energy industry
• Protect downstream equipment and increase component lifetime.
• Integrated water separator with electronic drain as standard.
• GA Full Feature decreases energy and installation costs.
Metal industry
• Easy and quick installation, with flexible ducting possibilities.
• A complete, ready-to-use solution including all components
and options.
• Low service cost thanks to high accessibility of components
and long service intervals.
General industry
• GA compressors are designed for ultimate efficiency
in all your industrial applications.
• Ideal for machinery operation, plant maintenance, cleaning,
pneumatic tools and controls, sand- and shot-blasting.
Reducing your operating costs
The GA 160+-315 (VSD) provide maximum output at the
lowest energy consumption. They will reduce your energy bill
and your CO2 emissions. The right core technologies with our
experience in design and manufacture combine to produce
a solution to match your needs. Generous cooling capacity,
low pressure drop and a highly efficient drive train ensure
optimum operation over a long lifetime.
1
High-efficiency
motor
• TEFC IP55 motor (Class F
insulation B rise) protects
against dust and chemicals.
• Continuous operation in
ambient temperatures up
to 55°C/131°F (standard up
to 46°C/115°F).
7
3
2
State-of-the-art screw element
• Patented asymmetric rotor profile and meticulous selection of bearings.
• Low wear and tear leads to increased reliability.
• Proven reliability with thousands of installations throughout the world.
6
3
2
Cooling module
• Separated oil and aftercoolers for highest efficiency. 4
• Axial cooling fans driven by separate TEFC electric motors
(IP55 protection).
• Low noise level.
5
4
Gear-driven transmission
• Maintenance-free; totally enclosed and protected against dirt and dust.
• Optimal working range of the screw element.
• Bowex coupling to absorb the trust load and increase the reliability.
5
Service-friendly
• Selection of long lifetime consumables.
• Easy and safe access to all service parts.
• Unique sliding system to access the oil coolers.
6
Optimized loading/unloading valve
• Ensures constant optimized pressure in the system,
resulting in significant energy savings.
• Simple, maintenance-free set-up with few moving parts
for highest reliability.
• Accurate control through solenoid valve.
7
Superior air quality
• Integrated water separator with electronic
drain removes 100% of condensate.
• Full Feature with integrated dryer
(up to 315 kW).
10 8
Easy to install
• Oil-containing frame as standard.
• All-in-one package, no hidden costs.
• Flexible ducting possibilities.
1 9
Superior air intake filter
• Protects the compressor components by removing
99.9% of dirt particles > 3 μm.
• Reduces the dust load in the fine filter, doubling the
filter element lifetime without reducing filter efficiency.
10
Elektronikon® for advanced monitoring
• Integrated smart algorithms reduce system pressure
and energy consumption.
• Monitoring features include warning indications, maintenance
scheduling and online visualization of machine’s condition.
VSD: DRIVING DOWN YOUR ENERGY COSTS
Over 70% of a compressor’s lifecycle cost is taken up by the energy it consumes. Moreover, the generation
of compressed air can account for more than 40% of a plant’s total electricity bill. To cut your energy costs,
Atlas Copco has pioneered Variable Speed Drive (VSD) technology for several decades. VSD leads to major
energy savings, reducing the consumption of energy producing fuels and protecting the environment
for future generations. Thanks to continual investments in this technology, Atlas Copco offers the widest
range of integrated VSD compressors on the market.
MAX
MAX
• 64% of all installations. • 28% of all installations. • 8% of all installations.
• Factory working 24 hrs/day: • Factory working 2 shifts/day, • Factory working 2 shifts/day,
low demand at night & high no weekend work: erratically no weekend work: typical 'fixed'
demand during the day. varying air demand. speed application.
Efficiency
External VSD operating range
Integrated VSD Non-integrated VSD Flow gaps due to vibration and noise issues
1 The Elektronikon® unit controller manages both the 7 A highly efficient frequency converter in a cool
compressor and the integrated converter, ensuring overpressure cubicle ensures stable operation in high
maximum machine safety within parameters. ambient temperatures up to 50°C/122°F
2 Flexible pressure selection from 4 to 13 bar with (standard up to 46°C/114.8°F).
electronic gearing reduces electricity costs. 8 It is important to ensure that when using a Variable Speed
3 Specific converter and motor design (with protected Drive vibration and noise issues do not occur. Atlas Copco
bearings) for the highest efficiency across the speed range. compressors are designed and tested to guarantee they
operate across the entire frequency range of operation.
4 Electric motor specifically designed for low operating
When an external VSD drive is used it may become
speeds with clear attention to motor cooling and
necessary to limit the operating range of the compressor,
compressor cooling requirements.
leading to reduced energy saving and jeopardizing stable
5 All Atlas Copco GA VSD compressors are EMC tested and air network pressure.
certified. Compressor operation does not influence
9 The cubicle cooling booster increases the lifetime
external sources and vice versa.
of electrical components due to a cool cubicle in
6 Mechanical enhancements ensure that all components overpressure and reduced dust ingress.
operate below critical vibration levels throughout the
10 Net pressure band is maintained within 0.10 bar, 1.5 psi.
entire compressor speed range.
No current peaks
% Full load current
Seconds
Shower Space heating Steam boiler Process Heat driven chillers Heat exchangers
Applications:
• Heating of facilities, warehouses or workshops.
• Drying air for painting and washing applications.
PROTECT YOUR PRODUCTION WITH THE GA FF
Untreated compressed air contains moisture, aerosols and dirt particles that can damage your air system
and contaminate your end product, resulting in risk of corrosion and compressed air system leaks.
Maintenance costs can far exceed air treatment costs. Our compressors provide the clean, dry air that
improves your system’s reliability, avoids costly downtime and production delays, and safeguards the quality
of your products.
Configure your GA
ISO Quality Class Dirt Particle Size Water Pressure Dew Point Oil Concentration
for the air quality you need
Protects
Controls
Communicates
Loaded
Loaded Unloaded
Unloaded Stopped
Time Time
Saved energy
A Intake air F
B Air/oil mixture
C Oil
E Condensate
E
F Dried compressed air
A D
B
E
C
Vp
A Intake air
B Air/oil mixture
C Oil
D
B
E
C
Vp
GA 160+ - 5.5 bar 5.5 80 5.3 77 621 37.2 1316 3624 7990 4081 8997
GA 160+ - 7.5 bar 7.5 109 7.3 106 538 32.2 1140 3624 7990 4081 8997
160 77
GA 160+ - 8.5 bar 8.5 123 8.3 120 498 29.8 1055 3197 7049 3654 8057
GA 160+ - 10 bar 10 145 9.8 142 448 26.9 949 3197 7049 3654 8057
GA 200 - 5.5 bar 5.5 80 5.3 77 748 44.8 1585 3624 7990 4217 9297
GA 200 - 7.5 bar 7.5 109 7.3 106 674 40.4 1428 4927 10862 5384 11870
GA 200 - 8.5 bar 8.5 123 8.3 120 632 37.9 1339 200 78 4927 10862 5384 11870
GA 200 - 10 bar 10 145 9.8 142 572 34.3 1212 4500 9922 4957 10929
GA 200 - 14 bar 14 203 13.8 200 440 26.4 932 4500 9922 4957 10929
GA 250 - 7.5 bar 7.5 109 7.3 106 833 49.9 1765 5144 11341 5737 12648
GA 250 - 8.5 bar 8.5 123 8.3 120 773 46.3 1638 5144 11341 5601 12348
250 78
GA 250 - 10 bar 10 145 9.8 142 709 42.5 1503 4717 10400 5174 11408
GA 250 - 14 bar 14 203 13.8 200 575 34.5 1219 4717 10400 5174 11408
GA 315 - 7.5 bar 7.5 109 7.3 106 1000 59.9 2119 5559 12256 6152 13563
GA 315 - 8.5 bar 8.5 123 8.3 120 955 57.2 2024 5559 12256 6152 13563
315 78
GA 315 - 10 bar 10 145 9.8 142 891 53.4 1888 5132 11315 5725 12622
GA 315 - 14 bar 14 203 13.8 200 745 44.7 1579 5132 11315 5589 12323
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
DIMENSIONS
- Intake air temperature 20°C (68°F).
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa)
dB (with uncertainty 3 dB). Values determined according to noise level test code
L W H ISO 2151 and noise measurement standard ISO 9614. Pressure dew point of
integrated refrigerant dryer at reference conditions: 2°C to 3°C (36°F to 37°F).
mm
GA 160+-315 A/W 3400 2000 2300 (3) Integrated dryer: compressed air pressure dewpoint at dryer
GA 160+-315 A - FF 4300 2000 2300 reference conditions 3°C (37°F).
GA 160+-315 W - FF 3400 2000 2300 FAD (1) is measured at the following working pressures:
GA 160+-315 A/W (MV) 3700 2000 2300
GA 160+-315 A - FF (MV) 4600 2000 2300 Standard FF
GA 160+-315 W - FF (MV) 3700 2000 2300 5.5 bar version at 5 bar 5 bar
GA 200-315 VSD A 3700 2000 2300 7.5 bar version at 7 bar 7 bar
GA 200-315 VSD A - FF 4600 2000 2300 8.5 bar version at 8 bar 8 bar
GA 200-315 VSD W 3700 2000 2300 10 bar version at 9.5 bar 9.5 bar
GA 200-315 VSD W - FF 3700 2000 2300 14 bar version at 13.5 bar 12.5 bar
A = air-cooled.
W = water-cooled.
FF = Full Feature.
TECHNICAL SPECIFICATIONS
GA 160+-315 (VSD) (60 Hz)
Working pressure Capacity FAD (1) Installed Weight
Noise
motor
level (2)
TYPE Standard Full Feature (3) Standard / Full Feature power Standard Full Feature
GA 160+ - 75 psi 5.5 80 5.3 77 580 34.8 1229 77 4712 10388 5169 11396
GA 160+ - 100 psi 7.4 107 7.2 104 511 30.6 1083 77 4712 10388 5169 11396
200
GA 160+ - 125 psi 9.1 132 8.9 129 446 26.7 945 77 4285 9448 4742 10455
GA 160+ - 150 psi 10.9 158 10.7 155 397 23.8 841 75 4285 9448 4742 10455
GA 200 - 75 psi 5.5 80 5.3 77 711 42.6 1507 77 4712 10388 5305 11696
GA 200 - 100 psi 7.4 107 7.2 104 633 37.9 1341 77 4892 10785 5349 11793
GA 200 - 125 psi 9.1 132 8.9 129 576 34.5 1221 250 77 4465 9845 4922 10852
GA 200 - 150 psi 10.9 158 10.7 155 505 30.3 1070 77 4465 9845 4922 10852
GA 200 - 200 psi 14 203 13.8 200 405 24.3 858 75 4465 9845 4922 10852
GA 250 - 100 psi 7.4 107 7.2 104 759 45.5 1608 78 5014 11054 5607 12361
GA 250 - 125 psi 9.1 132 8.9 129 694 41.6 1471 77 5014 11054 5471 12062
300
GA 250 - 150 psi 10.9 158 10.7 155 627 37.6 1329 77 4587 10114 5044 11121
GA 250 - 200 psi 14 203 13.8 200 526 31.5 1115 77 4587 10114 5044 11121
GA 315 - 100 psi 7.4 107 7.2 104 925 55.4 1960 78 5654 12465 6247 13772
GA 315 - 125 psi 9.1 132 8.9 129 855 51.2 1812 78 5654 12465 6247 13772
350
GA 315 - 150 psi 10.9 158 10.7 155 784 47.0 1661 78 5227 11525 5820 12832
GA 315 - 200 psi 14 203 13.8 200 667 40.0 1414 77 5227 11525 5684 12532
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009).
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
DIMENSIONS
- Intake air temperature 20°C (68°F).
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa)
dB (with uncertainty 3 dB). Values determined according to noise level test code
L W H ISO 2151 and noise measurement standard ISO 9614. Pressure dew point of
inch integrated refrigerant dryer at reference conditions: 2°C to 3°C (36°F to 37°F).
GA 160+-315 A/W 134 79 91 (3) Integrated dryer: compressed air pressure dewpoint at dryer
GA 160+-315 A - FF 169 79 91 reference conditions 3°C (37°F).
A = air-cooled.
W = water-cooled.
FF = Full Feature.
2935 0626 11 © 2015, Atlas Copco, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety instructions in the manual before usage.
www.atlascopco.com
Oil-injected rotary
screw compressors
Reliability
The GA compressor's drive train is IP66 rated protecting it
temperatures up to 55°C/131°F.
Serviceability
Service time is reduced to a minimum with all service parts
traditional designs.
3
Installations around the world
Thousands of GA compressors are running around the world in a vast range of applications delivering reliable and
General industry
Lowest life cycle cost
Mining
Operating in the toughest conditions
harshest conditions.
Metal plants
Ultimate efficiency
this demand.
Cement industry
Easy to maintain and service
5
GA air-cooled fixed speed pack
7
GA water-cooled VSD pack
9
VSD: driving down energy costs
Variable Speed Drive
generation of compressed air can account for more than 40% of a plant’s total electricity bill. To cut your
energy costs, Atlas Copco pioneered Variable Speed Drive (VSD) technology in the compressed air
industry. VSD leads to major energy savings, while protecting the environment for future generations.
Thanks to continual investments in this technology, Atlas Copco offers the widest range of integrated
dramatically.
3. Specific converter and motor design (with protected bearings) for the highest efficiency across the
speed range.
4. Electric motor specifically designed for low operating speeds with clear attention to motor cooling and
5. All Atlas Copco VSD compressors are EMC tested and certified. Compressor operation does not
6. Mechanical enhancements ensure that all components operate below critical vibration levels
7. A highly efficient frequency converter in a cubicle ensures stable operation in high ambient
temperatures up to 50°C/122°F
8. No ‘speed windows’ that can jeopardize the energy savings and the stable net pressure. Turndown
and air treatment equipment under a variety of conditions. Our solutions provide you with key benefits
such as increased energy efficiency, lower energy consumption, reduced maintenance times and less
stress… less stress for both you and your entire air system.
• Clear icons and intuitive navigation provides you fast access to all
of the important settings and data.
• Monitoring of the equipment running conditions and
maintenance status; bringing this information to your attention
when needed.
• Operation of the equipment to deliver specifically and reliably to
your compressed air needs.
• Built in remote control and notifications functions provided as
standard, including simple to use integrated webpage.
• Integrated SMARTLINK
• Support for 31 different languages, including character based
languages.
11
Dual set-point and automatic stop
Most production processes create fluctuating levels of demand which, in turn, can create energy waste in
low use periods. Using the Elektronikon® unit controller, you can manually or automatically switch
between two different setpoints to optimize energy use and reduce costs at low use times. In addition,
the sophisticated algorithm runs the drive motor only when needed. As the desired setpoint is maintained
while the drive motor’s run time is minimized, energy consumption is kept to a minimum.
SMARTLINK
Monitor your compressed air installation with SMARTLINK
Knowing the status of your compressed air equipment at all times is the surest way to achieve optimal
Increase uptime
Save money
Optimizer 4.0 minimizes the generation of excess compressed air by starting and stopping compressors.
Its user friendly interface enables you to set multiple pressure bands, allowing you to optimize your
With Optimizer 4.0 you can realize the full energy saving potential of VSD (Variable Speed Drive). It
regulates the VSD to ensure that the compressed air output is proportional to the demand, preventing
higher pressures than required, excess unloaded running, and spiraling energy costs.
Improving Uptime
Optimizer 4.0 effectively eliminates production downtime caused by unexpected system pressure drops,
because it regulates the system pressure instead of the compressor output pressure.
This means Optimizer 4.0 will automatically adjust the system pressure to compensate for pressure
We also provide additional functionality and services on Optimizer 4.0 to ensure that your energy savings
will stand the test of time. Even when your installation needs adaptations or your demand changes.
13
Services
Properly caring for your air compressor helps you lower your operating costs and minimises the risk for unplanned
breakdowns or production stops. Atlas Copco offers energy efficiency checks, service, repairs, spare parts and
maintenance plans for all air compressors. Entrust your servicing to our expert professionals and ensure your business
continues to run efficiently. Our plans cover repairs, preventative maintenance, spare parts, and more.
performance and lifetime. Our compressed air fluids and lubricants cover all your needs.
Anti-oxidation
Prevent foaming
Save costs
Optimal maintenance will reduce the operational cost of your compressed air and vacuum system.
Our maintenance expertise makes life easier when it comes to resource management.
Specialist service keeps your equipment running as it should, protecting your investment.
15
Customized to your needs
A range of optional features are available to ensure the GA compressor is customized to the applications requirements
humid environments up to :
vibration levels.
the compressor can run longer, since overhaul can be done when
Energy recovery
The energy recovery system consists of a build-in stainless steel
heat from the compressor in the form of warm water or hot water
2009, annex “C” and “E” (4th edition) for full transparency and
peace of mind.
Integrated dryer
In a GA Full Feature compressor the refrigeration dryer is fully
conditions.
compressor motor.
17
Flow diagrams GA
Process flow, oil flow and cooling flow - step by step
GA 90+ - 5.5 bar 5.5 80 5.3 77 353 21.2 748 2800 6173 3200 7055
GA 90+ - 7.5 bar 7.5 109 7.3 106 297 17.8 629 2800 6173 3200 7055
90 76
GA 90 - 8.5 bar
+
8.5 123 8.3 120 284 17.0 602 2800 6173 3200 7055
GA 90+ - 10 bar 10 145 9.8 142 260 15.6 551 2800 6173 3200 7055
GA 110 - 5.5 bar 5.5 80 5.3 77 424 25.4 898 2700 5952 3100 6834
GA 110 - 7.5 bar 7.5 109 7.3 106 370 22.2 784 2700 5952 3100 6834
110 77
GA 110 - 8.5 bar 8.5 123 8.3 120 347 20.8 735 2700 5952 3100 6834
GA 110 - 10 bar 10 145 9.8 142 316 19.0 670 2700 5952 3100 6834
GA 132 - 5.5 bar 5.5 80 5.3 77 502 30.1 1064 2800 6173 3200 7055
GA 132 - 7.5 bar 7.5 109 7.3 106 440 26.4 932 2800 6173 3200 7055
132 78
GA 132 - 8.5 bar 8.5 123 8.3 120 414 24.8 877 2800 6173 3200 7055
GA 132 - 10 bar 10 145 9.8 142 382 22.9 809 2800 6173 3200 7055
GA 160 - 7.5 bar 7.5 109 7.3 106 525 31.5 1112 2900 6393 3300 7275
GA 160 - 8.5 bar 8.5 123 8.3 120 495 29.7 1049 160 78 2900 6393 3300 7275
GA 160 - 10 bar 10 145 9.8 142 460 27.6 975 2900 6393 3300 7275
(1) Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20°C (68°F).
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
(3) Integrated dryer (FF) : compressed air pressure dewpoint at dryer reference conditions 3°C (37°F).
Dimensions
L W H
mm mm mm
GA 90+ - 75 psi 5.5 80 5.3 77 316 19.0 670 3100 6834 3450 7606
GA 90+ - 100 psi 7.4 107 7.2 104 303 18.2 642 3100 6834 3450 7606
125 76
GA 90 - 125 psi
+
9.1 132 8.9 129 271 16.3 574 3100 6834 3450 7606
GA 90+ - 150 psi 10.9 158 10.7 155 243 14.6 515 3100 6834 3450 7606
GA 110 - 75 psi 5.5 80 5.3 77 425 25.5 901 2600 5732 3050 6724
GA 110 - 100 psi 7.4 107 7.2 104 372 22.3 788 2600 5732 3050 6724
150 77
GA 110 - 125 psi 9.1 132 8.9 129 333 20.0 706 2600 5732 3050 6724
GA 110 - 150 psi 10.9 158 10.7 155 298 17.9 631 2600 5732 3050 6724
GA 132 - 75 psi 5.5 80 5.3 77 505 30.3 1070 2700 5952 3150 6945
GA 132 - 100 psi 7.4 107 7.2 104 446 26.8 945 2700 5952 3150 6945
175 77
GA 132 - 125 psi 9.1 132 8.9 129 400 24.0 848 2700 5952 3150 6945
GA 132 - 150 psi 10.9 158 10.7 155 354 21.2 750 2700 5952 3150 6945
GA 160 - 100 psi 7.4 107 7.2 104 529 31.7 1121 2900 6393 3250 7165
GA 160 - 125 psi 9.1 132 8.9 129 480 28.8 1017 215 78 2900 6393 3250 7165
GA 160 - 150 psi 10.9 158 10.7 155 439 26.3 930 2900 6393 3250 7165
(1) Unit performance measured according to ISO 1217, Annex C, Edition 4 (2009)
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi).
- Intake air temperature 20°C (68°F).
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
(3) Integrated dryer (FF) : compressed air pressure dewpoint at dryer reference conditions 3°C (37°F).
Dimensions
L W H
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009)
Reference conditions:
- Absolute inlet pressure 1 bar (14.5 psi)
- Intake air temperature 20°C (68°F)
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
( 3) Integrated dryer (FF): compressed air pressure dewpoint at dryer reference conditions 3°C (37°F).
Dimensions
L W H
mm mm mm
GA 110-160 VSD +
2500 1785 2020
(1) Unit performance measured according to ISO 1217, Annex C and E, Edition 4 (2009)
Reference conditions:
Absolute inlet pressure 1 bar (14.5 psi)
Intake air temperature 20°C (68°F)
(2) A-weighted emission sound pressure level at the work station, Lp WSA (re 20 μPa) dB (with uncertainty 3 dB).
Values determined according to noise level test code ISO 2151 and noise measurement standard ISO 9614.
Pressure dew point of integrated refrigerant dryer at reference conditions: 2°C to 3°C (36°F to 37°F)
( 3) Integrated dryer: Compressed air pressure dewpoint at dryer reference conditions 3°C (37°F)
Dimensions
L W H
mm mm mm
GA 90 - 160
+
2500 1785 2020
GA 90 - 160 (FF)
+
2900 1785 2020
COMMITTED TO SUSTAINABLE PRODUCTIVITY
We stand by our responsibilities towards our customers, towards the
environment and the people around us. We make performance stand
the test of time. This is what we call – Sustainable Productivity.
www.atlascopco.com
2935 0712 00 © 2018, Atlas Copco Airpower NV, Belgium. All rights reserved. Designs and specifications are subject to change without notice or obligation. Read all safety
instructions in the manual before usage.
24