Professional Documents
Culture Documents
5 kW (55 PS)
Operating Weight
ZAXIS70/ZAXIS70LC : 6 300 kg/6 400 kg
ZAXIS80LCK : 7 200 kg
Backhoe Bucket
SAE, PCSA Heaped : 0.13 0.33 m3
CECE Heaped : 0.12 0.29 m3
FP uturistic
erformance
Easier To Use
(Multi-purpose machine)
Increased front speed: Swing-independent 3-pump
hydraulic system.
26% more leveling speed (compared to EX60-5).
4% more travel power (compared to EX60-5).
Travel speed increased by 5km/h.
Three auxiliary ports (valves)
as standard equipment.
Cab Designed For Comfort
(A comfortable place for the operator)
AM-FM radio as standard equipment.
Auto control air conditioner as optional.
Lower Running Costs
Stronger structural component design
Increased wear resistance of bucket joint:
WC thermal spraying.
New HN bushing offers improved grease retention.
SC (Self Cleaning) paint.
Lower Maintenance Costs
Reduced maintenance time and expense
Daily inspection from ground level.
Extended lubrication interval at bucket joint
Notes : section.
1. Never leave the front attachment in a
raised position. Make sure the front attach- Extended replacement interval for
ment is lowered to the ground before
leaving the equipment unattended. (Some hydraulic oil filter (Every 1 000 hours).
of the pictures in this catalog show an un-
manned machine with attachments in an
operating position. These were taken for
demonstration
purposes only and the actions shown are
not recommended under normal operating
conditions.)
2. Caution plates on the machine will vary ac-
cording to country.
3. Photos include optional equipment.
2-3
Z A X I S
Travel Power You Can Depend On Three Auxiliary Ports (Valves)
A new automatic 2-speed travel motors are used to as Standard Equipment
increase travel power These ports make it easier to use attachments.
and speed.
4% more travel power
S marter
than EX60-5
ZAXIS uses
advanced technology Travel speeds : 4.8 km /h
EX60-5 5.0 km / h
& to reduce costs
aster
F
while working
faster.
1 670 mm
minimum
digging radius
EX60-5
Increase in ZAXIS
maximum vertical 70
wall depth
210 mm
* Image shown is for explanation
purposes only.
4-5
Z A X I S Safety & Service
Corner Reinforced Structure (CRES) Cab
* The CRES cab meets OPG top guard level (ISO).
inimum
The cab is designed with "just in case" protection for the
M
The operator's operator. The rigid cab design
compartment is designed can help prevent injury to
Effort
the operator during an
for both comfort accident.
and operating efficiency.
aximum
M Efficiency
Reinforced sections
shown in red
Lock
Unlock
Emergency evacuation
hammer
Easy-to-Monitor Instruments Idler direction mark
Large overhead window
Strategically positioned instru- Emergency engine stop knob
ments allow the operator to Right window guard
monitor the status of key areas
with just a glance.
Easy-to-Operate
Switches and other essential
controls are located near the
operator. This helps keep
operator movement to a
minimum, enhancing control
and helping to fight fatigue. Easy lock front window latch Storage box
Enhanced visibility on the Drink holder
Auto Control Air Conditioner lower right side
(Option)
Simply set the temperature
* Illustration shows a sample of the air flow and forget about it. Ducts are
during bi-level control.
positioned to promote even air
flow throughout the cab.
Slide window
6-7
Z A X I S Z A X I S
Equipment Operation Status Report
IT
Extensive steps
F unctional
&
urable
have been taken
to support basic
performance and
Onboard ICX
( Information
Controller )
PC nformation
echnology
D overall durability. Smart Advanced
Saving helps
technology
reduce
maintenance costs
Information Services for Equipment
Operation record
Error record
Support
Providing the data
for making
Lower
Cover for swing Alarm record the right decisions.
running gear lubrication area
Frequency distribution
costs Swing motor
Radiator coolant /hydraulic
temperature etc.
Cab
Control and others.
valve
Outer air Fuel tank Water
conditioner separator
filter
(option) Oil tank
Pilot filter
8-9
SPECIFICATIONS
10 - 11
SPECIFICATIONS
12 - 13
LIFTING CAPACITIES
A A
A: Load radius A: Load radius
B: Load point height B: Load point height
B C: Lifting capacity B C: Lifting capacity
METRIC MEASURE C
METRIC MEASURE C
Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg Rating over-side or 360 degrees Rating over-front Unit: 1 000 kg
ZAXIS70 ZAXIS70 with dozer blade (on ground)
Load radius Load radius
At max. reach At max. reach
Load point 2m 3m 4m 5m 6m Load point 2m 3m 4m 5m 6m
Conditions Conditions
height height
meter meter
4m *1.25 *1.25 *1.34 *1.34 0.85 *0.87 5.48 4m *1.25 *1.25 *1.34 *1.34 *0.87 *0.87 5.48
Boom 3.72 m Boom 3.72 m
3m *2.22 *2.22 *1.71 *1.71 1.45 *1.52 0.98 1.22 0.73 *0.87 5.85 3m *2.22 *2.22 *1.71 *1.71 *1.52 *1.52 1.07 *1.47 0.81 *0.87 5.85
Arm 1.62 m Arm 1.62 m
2m 2.18 *2.48 1.38 1.72 0.95 1.18 0.68 0.86 6.00 2m 2.37 *2.48 1.51 *1.85 1.04 *1.60 0.76 *0.90 6.00
Bucket Bucket
1m 2.01 2.58 1.30 1.64 0.91 1.15 0.67 0.85 5.95 1m 2.20 *3.16 1.43 *2.19 1.01 *1.76 0.75 *0.96 5.95
SAE,PCSA:0.28 m3 SAE,PCSA:0.28 m3
0 (Ground) 1.94 2.50 1.25 1.58 0.88 1.11 0.71 0.90 5.71 0 (Ground) 2.14 *3.40 1.38 *2.41 0.98 *1.89 0.79 *1.08 5.71
CECE:0.24 m3 -1 m
CECE:0.24 m3 -1 m
*3.15 *3.15 1.93 2.49 1.23 1.56 0.87 1.10 0.82 1.04 5.23 *3.15 *3.15 2.12 *3.35 1.35 *2.46 0.96 *1.90 0.91 *1.27 5.23
Shoe 450 mm -2 m Shoe 450 mm -2 m
*3.50 *3.50 1.95 2.51 1.23 1.56 1.09 1.37 4.42 *3.50 *3.50 2.14 *3.08 1.36 *2.30 1.20 *1.66 4.42
14 - 15
STANDARD EQUIPMENT Standard equipment may vary by country, so please consult your Hitachi dealer for details.
OPTIONAL EQUIPMENT Optional equipment may vary by country, so please consult your Hitachi dealer for details.
• Auto control air conditioner • Travel motion alarm device • Front glass upper guard
• Outer air conditioner filter • Air cleaner double filters • Dozer blade
• Arm rests • Attachment basic piping • Off-set front
• Suspension seat • Accessories for breaker • 450 mm (18") pad crawler
• Hose rupture valves • Accessories for breaker & crusher
• Electric fuel refilling pump • Accessories for 2 speed selector
• Swing motion alarm device with lamps • Front glass lower guard
Printed in Japan