Professional Documents
Culture Documents
2-1-1. Solution
Replace D101 on MAIN board.
D101
A:3.7 VA
B:3.3 VA
2-68
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will blank / no message or “PLEASE WAIT” display on front panel, and
it will not boot-up.
2-2-1. Solution
Replace IC155 on MAIN board.
L158
IC155
< Main board bottom view >
2-69
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will blank / no message or “PLEASE WAIT” display on front panel, and
it will not boot-up.
2-3-1. Solution
Replace IC153 on MAIN board.
L154
C181
IC153
< Main board top view >
2-70
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will blank / no message or “PLEASE WAIT” display on front panel, and
it will not boot-up.
2-4-1. Solution
Replace IC153 on MAIN board.
IC153
L153
C174
2-71
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will “PLEASE WAIT” display on front panel, and it will not boot-up
normally.
2-5. X501
2-5-1. Solution
Replace X501 on MAIN board.
X501
2-72
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will “PLEASE WAIT” display on front panel, and it will not boot-up
normally.
2-6-1. Solution
Replace IC504 on MAIN board.
IC501 IC502
IC504 IC503
2-73
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will “PLEASE WAIT” display on front panel, and it will not boot-up
normally.
2-7-1. Solution
Replace IC502, IC503 on MAIN board.
IC501 IC502
C523
IC503
C545
DDR3_VREF
< Main board bottom view > < Main board top view >
2-74
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will “PLEASE WAIT” display on front panel, and it will not boot-up
normally.
2-8-1. Solution
Replace IC501 on MAIN board.
IC101
IC501 R134
RESET#
< Main board bottom view > < Main board top view >
2-75
ONE POINT REPAIR GUIDE
2. NO BOOTING WHEN YOU TURN THE UNIT ON, NO MESSAGE OR
“PLEASE WAIT” ON FRONT PANEL
When you turn on your set, it will “PLEASE WAIT” display on front panel, and it will not boot-up
normally.
2-9-1. Solution
Replace MAIN board.
IC501 IC502
IC503
2-76