Professional Documents
Culture Documents
Myride VX Group is a system designed to select, play and control videos for
use on video output devices for live or virtual trainings. The system is controlled
using two preconfigured tablets via peer to peer WiFi connection. One tablet is
mounted on an IC5/IC7 for instructor access during training sessions. The
second is for selection of virtual trainings from a desktop or wall mount.
Contents:
1. Required tools and hardware 2
2. Scope of delivery 2
3. Instructor Bike IC5/IC7 Power cable installation
3.1. Shroud removal 3
3.2. Power cable fastening 6
4. MYRIDE VX Virtual & Live Tablet
4.1. Handlebar Mount Installation 10
4.2. MYRIDE VX TABLET Universal Desktop / Wall Mounts 14
5. MYRIDE VX Media Server & Tablet Connection and Setup
5.1. Media Server Connection and Setup 15
5.2. Tablet Setup 19
6. Function Test 23
7. Shroud Assembly 30
8. Appendix
8.1. Pairing the WIFI connection of the Myride VX Tablet to the
Myride VX Media Server.
8.2. Tablet Menu Overview 33
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 1
1. Required Tools and Hardware:
QUANTITY TOOLS SIZE MM
1 L shape Allen key 3 mm
1 Straight shaft Allen key 2 mm, 2.5 mm & 3 mm
1 Open end spanner or equivalent 10 mm
1 Cutting pliers
1 Long nose pliers
1 Scissors
5 Cable ties 100 mm
5 Cable ties 350 mm
1 Black tape 20 mm wide
2. Scope of delivery:
QUANTITY Description
1 Power cable for Instructor VX Tablet
1 MYRIDE VX tablet
2 Universal Mounts
1 Instructor MYRIDE VX Tablet + IC5/IC7 Mount
1 Media server including VESA Universal wall mount
1 Antenna
1 Allen key 2,5 mm
1 Allen key 3 mm
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 2
3. IC5/IC7 Bike Power Cable Installation
3.1Shroud removal
Please refer to our shroud removal video on our service portal at
Http://www.teamicg.com/en
3.1.1 Open the seat height adjustment by lifting 3.1.2 Remove seat post cover by removing 2
the lever into the horizontal position and bolts with a 2 mm Allen key and 1 bolt
fully extend the seat post. with a 3 mm straight Allen key.
3.1.3 Remove brake dial cap by carefully by 3.1.4 Remove 1 bolt with a 3 mm Allen key
lifting the cover with a small 2 mm flat and lift cap to remove.
headed screw driver.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 3
3.1.5 Remove 4 bolts with 2 mm Allen key. 3.1.6 Lift handlebar top cover
3.1.9 Lift seat post and handlebar top cover 3.1.10 Remove 14 bolts from the shroud on the
and remove top main cover. right side with a 3 mm straight Allen key.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 4
3.1.11 Turn the crank to the above position so 3.1.12 Carefully slide the shroud towards the
the shroud can be maneuvered past pedal
the pedal
3.1.13 Slightly tilt the shroud and gently pull it by the pedal without detaching the rubber spacers from the
shroud.
Tip!
If a rubber spacer falls off the shroud, use superglue to fasten it back to its position on the shroud.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 5
3.2 Power cable fastening
Rear Front
3.2.1 Before fixing the cable, fully extend the stem. The length of cable must extend up to the 20 mark.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 6
3.2.2 Use 100 mm cable ties to fasten the power cable on two points with the Bowden wire.
3.2.3 The power cable should be fastened on two more points on the Bowden wire using 100 mm small
cable ties.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 7
3.2.4 Fix the power cord to the frame using a strip of BLACK tape and cable tie. Take care to stick the tape max.
1 cm above the lower frame so it cannot be seen from under the shroud. Black tape is required to make it
less obvious if the edge of the tape is visible.
3.2.5 Run the cable down the frame hiding the cable under the frame/stabilizer.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 8
3.2.6 Fasten the power cable in 2 places with 350 mm cable ties.
3.2.8 The power cable is fastened by inserting the connector from the inside of the handlebar top cover and
fastening them from outside with a washer and a nut.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 9
4 Myride VX Tablet
If your bike is boxed and the computer has not yet been fastened to the bike, do
not mount the spacer because it must be removed for the assembly of the
handlebar mount. See below 4.1.1 and 4.1.2
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 10
Before the VX Tablet can be mounted on the bike, the bolt and spacer fixing the
computer to the bracket must to be removed.
Depending on your bike revision, a spacer may not have been used to fasten the
computer. If this is the case in your bike, a M4 counter sunk bolt was used and
can stay in place during the tablet assembly process.
4.1.1 Remove the bolt and spacer 4.1.2 The plastic spacer and bolt are
with a 3 mm Allen key. no longer needed to mount the
Myride VX bracket.
4.1.3 Remove the bolt from the bracket before next step
with a 2.5 mm Allen key
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 11
Tip!
4.1.4 Slide the tablet handlebar bracket completely onto the handlebar.
4.1.5 Take care to wrap the wires neatly around the computer and fasten the tablet handlebar
mount with the bolt which was removed in step 4.1.3
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 12
4.1.6 Plug the tablet into the power lead and the
USB /cable adapter into the power supply.
Do not close the shroud until the installation is completed and the system has
been tested.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 13
4.2 MYRIDE VX TABLET Universal Desktop / Wall Mounts
For on demand virtual workout video selection and media server control, the VX
Tablet can either be mounted on a wall or on a desktop with the universal
desktop and wall mounts. The scope of delivery includes 2 universal mounts.
The mounts could be permanently installed and the tablet can be moved as
required.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 14
MYRIDE VX Media Server
The unit can be operated either on a flat surface, vertically with the stand or
fastened to a wall. The media server must always be installed with sufficient air
circulation around the ventilation slots.
LAN
5.1.1 Screw the Antenna into the media server.
The Myride VX Media Server audio signal is transferred through a HDMI cable to
the external display by default.
The Myride VX Media Server can deliver sound to an external AV system via 3.5
mm jack (Green). Please note the settings must be adjusted accordingly in the
menu (Appendix B).
The Myride media server has a HDMI and DVI video output. Either can be used
to connect your video output device to the Myride VX Media Server
DVI HDMI
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 16
ATTENTION!
DVI HDMI
OR
If a DVI connection is used, the audio setting We recommend using a HDMI connection with a
must be changed in the Media Server menu. cable length no longer than 10 m.
See Appendix B
5.1.2
Connect your external video output device (TV or Projector) into the Media Server via DVI or HDMI cable.
5.1.3
Turn your TV or projector ON before the Myride VX Media Server is plugged in.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 17
Wake up on Power on
The MYRIDE VX Media Server automatically starts once connected to a power
source. The power switch is deactivated and therefore to turn the Media Server
off, the unit must be unplugged or turned off via circuit breaker.
5.1.4
Plug in the power cord to the MYRIDE VX Media
Server and connect to a power source.
Once the media server is plugged in, the on button will light up on the MYRIDE
VX Media Server and a loading screen will appear on the video output device.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 18
A screen saver will start with small ICG icons signaling that the tablets can be
turned on!
On/Off
Volume
Please note: the volume
buttons are not activated
in the group version
because the tablet cannot
control the audio output of
external devices.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 19
Tip!
5.2.1
Turn on both MYRIDE VX Tablets. After a short
loading screen, the App selection screen will appear
From the App selection screen, you can access the training apps and the
settings menu. The below screen will appear the same for both tablets.
For best user experience, we recommend adjusting the time and language to
your local settings. The next steps will show you how to make the proper
adjustments and confirm that the unit is charging correctly.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 20
ATTENTION!
The following will show how to set the time and language settings which must
be adjusted before use.
5.2.2
Touch the Settings button and confirm that you would like to continue
5.2.3
The Password is: 4 3 2 1
Enter and touch “OK”
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 21
Settings Menu
Only make changes to the default settings as needed. See Appendix B for further
explanation of these options.
5.2.4
Touch the Time and Language buttons to make the appropriate adjustments for your region if
required. The tablets have been setup for group mode. WiFi is preconfigured! Do not change any
settings.
5.2.5
Set the time
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 22
5.2.5
Select your language
5.2.6
If the Myride Tablet is plugged in, the battery icon with the lighting indicates that tablet charging is functional.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 23
5 Function Test
6.1 Tablet
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 24
6.2 External display test.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 25
If the tablet from which the video was selected and the output device are
showing the video, the installation was successful!
The side shroud has 13 rubber spacers on the inside which prevent the shroud
from rattling during use. Be sure that they are in place before assembly.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 26
7.1.1 Slide the shroud over the pedal, crank and fasten 14, M4x10 bolts.
Tip!
7.1.2 Put the main top cover into position 7.1.3 Fasten seat post cover with two M3 x 8
mm bolts and one M4 x 20 mm bolt in the
center.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 27
7.1.4 Fasten 2 M4 x 10 bolts including
washers on the handlebar top cover.
7.1.5 Position the flaps under the top cover and fasten with 4 bolts
7.1.6 Push knob on to bolt and fasten 7.1.7 Snap cap onto knob.
bolts.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 28
7 Appendix
Appendix A
Pairing the WIFI connection of the Myride VX Tablet to the Myride VX Media
Server.
The Myride VX Media Server has to be on and running before the tablets can be
connected. See section 5, page 18 of this manual for details.
This process applies for both tablets.
Step 1
Touch the Settings button and confirm that you would like to continue
Step 2
The Password is: 4, 3, 2, 1
Enter and touch “OK”
Step 3 Step 4
Touch the WIFI menu button. If the WIFI button is not turned on, touch it to turn
it on.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 29
Once the WIFI is turned on, the available networks will show up in a list.
Step 4
Touch the network starting with “Myride”.
(The number after “Myride” is the hard drive serial number of the Myride Media Server). The number can
be found on the media server.
Step 5
Enter the password and touch Connect.
Password: myride123
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 30
The Tablet is now connected to the Myride VX Media Server
Step 6
Touch the arrow to go back to the Myride menu.
End of operation.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 31
Appendix B
System Information
The system Information tab contains detailed information about the system and
settings. No adjustments can be made and it is relevant for trouble shooting.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 32
GroupX
Settings and adjustments for training modes, timetable modes, audio output and
manual updates can be made from this menu.
Live only: When “ON”, only live trainings can be selected through the
tablets.
Virtual only: When “ON”, only virtual training are available for selection
through the tablets.
Timetable only: When on, the tablet is locked and only the timetable will be
displayed on the tablet.
Timetable interrupt: When off, the tablet is locked preventing courses from being
accidentally started when a scheduled course is taking place.
HDMI Audio: By default, the audio signal is transferred via HDMI. If you wish
to connect an external AV device via 3.5mm jack, HDMI AUDIO
must be set to off.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 33
CDN: When connected via LAN to the Internet, the Myride VX Media
Server automatically checks for new content, updates or course
schedules once every hour. By touching the “CHECK NOW”
button, you can immediately connect to the server.
_________________________________________________________________________________
FB SB TAG 01 ICG® Service Bulletin | released by ICG® Service Department 34