Professional Documents
Culture Documents
Engine Coolant Temperature - Data Valid But Above Normal Operating Range - Moderately
Severe Level
Fault Code: 1119 Engine Coolant Temperature - Progressive power derate increasing in
PID(P), SID(S): P110 Data Valid But Above Normal severity from time of alert.
SPN: 110 Operating Range - Moderately
FMI: 0/16 Severe Level. Engine coolant
Lamp: Amber temperature signal indicates
SRT: engine coolant temperature is
above engine protection warning
limit.
Circuit Description:
The engine coolant temperature sensor is used by the engine control module (ECM) to monitor the engine coolant
temperature. The ECM monitors the voltage on the SIGNAL pin and converts this to a temperature value. The engine
coolant temperature value is used by the ECM for the engine protection system and engine emissions control.
Component Location:
The engine coolant temperature sensor is located on the exhaust side of the engine near the thermostat housing.
Refer to Procedure 100-002 in Section E for a detailed component location view.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 07-May-2014
File: 06-fc1119 Page 2 of 3
Action Taken When the Fault Code is Active:
• The ECM logs the fault code immediately when the diagnostic runs and fails.
• The torque output of the engine will be reduced.
• Exhaust gas recirculation (EGR) valve operation will be disabled.
Shop Talk:
This fault code indicates that coolant temperature has exceeded the engine protection limits for high coolant
temperature. Refer to Engine Coolant Temperature Above Normal troubleshooting symptom tree.
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 07-May-2014
File: 06-fc1119 Page 3 of 3
© 2008 Cummins Inc., Box 3005, Columbus, IN 47202-3005 U.S.A. Printed from QuickServe® Online.
All Rights Reserved. Last Modified: 07-May-2014