You are on page 1of 2

BLUE DIAMOND ATTACHMENTS

Extreme Duty Open Front - Standard Flow


The Open Front Cutter is an extremely
aggresive low flow cutter that will
outperform most high flow units!
The durable push bar keeps the trees
off the deck. Requiring only 16 GPMs,
this bi-directional cutter can cut up to
6” trees. The hydraulic motor drives a 3.5”
shaft that is housed in 2 massive bearings packed
in grease, and makes this commercial grade cutter very reliable.
Never before has this type of cutter been available for a low flow skid steer. Optional
high flow motors for 27-45 GPM range are available for both models.

Features include:
• 3.5” drive shaft
• 4 double edged blades
• One piece 3/4” thick
blade carrier
• Very quiet and smooth running
• Bearing seal protection kit
under deck
• Cut up to 6” material
• Rear chain curtain controls
debris discharge
• 1 year parts and labor warranty
• LIFETIME warranty against
breakage on drive spindle NEW… extra bracing under deck!

QUALITY | DEPENDABILITY | INTEGRITY


Blue Diamond AttachmentsTM
4512 Anderson Road, Knoxville, TN 37918
ph 888-376-7027 | info@bdattachments.com
www.bluediamondattachments.com
© 2019 Blue Diamond Attachments LLC. All rights reserved.
BLUE DIAMOND ATTACHMENTS

Applications:
MODEL 60” Standard Flow 72” Standard Flow
• Farm and ranch clearing # OF BLADES 3 4
• Right of way maintenance WEIGHT 1,220 lbs. 1,550 lbs.
• Brush and sapling clearing OVERALL WIDTH 63.5” 75.5”
• Mowing fields HEIGHT 27.25” 27.25”
LENGTH 74” 83”
FLOW 16-28 GPM 16-26 GPM
CUT CAPACITY 5” 6”

Wire Protection Kit One Piece 3/4” Raised Back DirectDrive


Blade Carrier

QUALITY | DEPENDABILITY | INTEGRITY


Blue Diamond AttachmentsTM
4512 Anderson Road, Knoxville, TN 37918
ph 888-376-7027 | info@bdattachments.com
www.bluediamondattachments.com
© 2019 Blue Diamond Attachments LLC. All rights reserved.

You might also like