[1] This material certificate provides specifications for 2880 pieces of M16X2.0X80 hex bolts and 2720 pieces of M16X2.0X90 hex bolts supplied to M/S KAM-04 Ltd. in Bulgaria.
[2] Chemical analysis and mechanical testing confirms the bolts meet EN ISO 898-1 standards for property class 4.8 bolts. Tensile strength and hardness testing was within specified ranges.
[3] Dimensional inspection found head height, major diameter, total length and thread pitch to be within DIN 558 tolerances.
[1] This material certificate provides specifications for 2880 pieces of M16X2.0X80 hex bolts and 2720 pieces of M16X2.0X90 hex bolts supplied to M/S KAM-04 Ltd. in Bulgaria.
[2] Chemical analysis and mechanical testing confirms the bolts meet EN ISO 898-1 standards for property class 4.8 bolts. Tensile strength and hardness testing was within specified ranges.
[3] Dimensional inspection found head height, major diameter, total length and thread pitch to be within DIN 558 tolerances.
[1] This material certificate provides specifications for 2880 pieces of M16X2.0X80 hex bolts and 2720 pieces of M16X2.0X90 hex bolts supplied to M/S KAM-04 Ltd. in Bulgaria.
[2] Chemical analysis and mechanical testing confirms the bolts meet EN ISO 898-1 standards for property class 4.8 bolts. Tensile strength and hardness testing was within specified ranges.
[3] Dimensional inspection found head height, major diameter, total length and thread pitch to be within DIN 558 tolerances.
[2] Mechanical Inspection: As per EN ISO 898 (Part-1)
Tensile Strength (MPa) Stress at 0.2 % non- Description No. of Pcs. proportional elongation (MPa) Hardness in HRB Checked Specified Min 420 Min. 240 Min. 71.0-99.50 → Max M16X2.0X80 → 440-442 251-254 82-86 20 M16X2.0X90 → 438-440 240-242 84-87
[3] Dimensional Inspection: As per DIN 558
Description No. of Across Across Head Major Dia. Total Length Thread Pitch Pcs. Flat (S) Corner (e) Height (k) (MD) Min. Checked 23.16 26.17 9.25 15.68 Specified → Max 24.00 -- 10.75 15.96 ±0.60 M16x2.0p 23.65 26.81 9.31 15.72 79.78 M16X2.0X80 → OK 23.81 26.89 9.68 15.78 79.89 50 23.68 26.80 9.35 15.75 89.72 M16X2.0X90 → OK 23.85 26.88 9.70 15.82 89.95
[4] Finish: ELECTROPLATED: TRIVALENT WHITE ZINC PLATED- EN ISO 4042
Description No. of Thickness (µm) Pcs. Checked Specified → 8 Micron Min. M16X2.0X80 → 12,13,16,15 100 M16X2.0X90 → 11,14,15,16 [5] Visual Inspection as per ISO 6157-PART-1 No surface defect has been observed, Result – Satisfactory. For Capital Bolts & Hardware