[1] This document is a material certificate for a batch of 20,48,000 pieces of pan pozi self-tapping screws that were produced by Capital Bolts and Hardwares.
[2] Chemical analysis, mechanical tests, dimensional inspections, finish verification and visual inspection were performed and found to meet specifications.
[3] Specifically, the screws met specifications for chemical composition, achieved hardness between 310-315 HV, dimensional measurements were within tolerance, had an electroplated white zinc finish of 11-15 microns thick, and passed visual inspection for surface defects.
Original Description:
Original Title
CBH-22-171 DIN 7505 B PAN POZI ST M3.5 X 25 WTZP 4.6
[1] This document is a material certificate for a batch of 20,48,000 pieces of pan pozi self-tapping screws that were produced by Capital Bolts and Hardwares.
[2] Chemical analysis, mechanical tests, dimensional inspections, finish verification and visual inspection were performed and found to meet specifications.
[3] Specifically, the screws met specifications for chemical composition, achieved hardness between 310-315 HV, dimensional measurements were within tolerance, had an electroplated white zinc finish of 11-15 microns thick, and passed visual inspection for surface defects.
[1] This document is a material certificate for a batch of 20,48,000 pieces of pan pozi self-tapping screws that were produced by Capital Bolts and Hardwares.
[2] Chemical analysis, mechanical tests, dimensional inspections, finish verification and visual inspection were performed and found to meet specifications.
[3] Specifically, the screws met specifications for chemical composition, achieved hardness between 310-315 HV, dimensional measurements were within tolerance, had an electroplated white zinc finish of 11-15 microns thick, and passed visual inspection for surface defects.
Description No. of Hardness in HV Specified Min Pcs. Checked 280-450 → Max Observation → 150 310-315
3] Dimensional Inspection: As per DIN 7505-B
Description DK K r M d D L Thread No. of Min. 6.42 2.48 0.30 1.80 Pitch Specified Pcs. 3.20 SELF Check 4.0 approx. 35±1.25 → Max 7.05 2.72 -- 2.20 3.55 TAPPING ed 6.58 2.52 0.36 3.95 1.88 3.35 34.15 Observation → 850 OK 6.80 2.68 0.38 4.10 2.10 3.50 35.12 4.68 [4] Finish: ELECTROPLATED: WHITE ZINC PLATED As per EN ISO 4042 Description No. of Minimum Coating Thickness (µm) Pcs. Specified → Checked 8 Micron Min.
Observation → 1000 11,12,15,14
[5] Visual Inspection as per ISO 6157-PART-1
No surface defect has been observed, Result – Satisfactory.