You are on page 1of 3

PSIT-Pranveer

Pranveer Singh Institute of Technology


Kanpur-Delhi
Delhi National Highway (NH
(NH-2), Bhauti, Kanpur-209305 (U.P.), India

Fundamentals of Electronics Engineering (BEC-101)


Practice Sheet –1(Unit-1)
B. Tech. - 1st YearSemester-1stSession: 2022-23

Q1: Determine the Current I for Each of the configuration using simlified equivalent model for the
diode.

Q2: Determine V0 and ID for the circuits give below.

Q3: Determine the level of V0 for the circuits give below.

Q4: Determine V0 and ID for the circuits give below.

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING


PSIT-Pranveer
Pranveer Singh Institute of Technology
Kanpur-Delhi
Delhi National Highway (NH
(NH-2), Bhauti, Kanpur-209305 (U.P.), India

Q5: Determine V01 and V02 for the circuits give below.

Q6: Determine V0 and ID for the circuits give below.

Q7: Determine V0 and I for the circuits give below.

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING


PSIT-Pranveer
Pranveer Singh Institute of Technology
Kanpur-Delhi
Delhi National Highway (NH
(NH-2), Bhauti, Kanpur-209305 (U.P.), India

Q8: Determine V01 , V02 and I for the circuit give below.

Q9: Determine V0 and current flowing through diode for the circuits give below.

Q10.Determine the state of diode for the circuit shown in Fig. 10 (i) and find ID and VD .
Assume simplified model for the diode.

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

You might also like