Professional Documents
Culture Documents
CR 5-6 A-A-A-E-HQQE
Vertical, multistage centrifugal pump with suction and discharge
ports on the same level. The pump head and base are in cast
iron - all other wetted parts are in stainless steel (EN 1.4301)
Liquid: Water Max pressure at stated temp: 16 bar / 120 °C Rated power - P2: 0.25 kW
Temperature: 20 °C Liquid temperature range: -20 .. 120 °C Rated voltage: 220-240D/380-415Y V
Specific Gravity: 1.000 Maximum ambient temperature: 40 °C Mains frequency: 50 Hz
Shaft seal: HQQE Enclosure class: 55 Dust/Jetting
Product number: On request Insulation class: F
Motor protection: NONE
Motor type: 71A
Eta 1/1: 72.4-70.0 %
9 90
8 80
7 70
6 60
5 50
4 40
3 30
2 20
1 10
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4 Q [m³/h]
P NPSH
[W] [m]
P1
150 1.5
100 P2 1.0
50 0.5
0 0.0
1/16
Submittal Data
109
141
191
105
G 1/2 G 1/2
362
Rp 1 1/4
G 1/2
22 M10 X 40
4 x 13.5
20
50
100 75
145 180
160 220
Materials:
Base: Cast iron
Base: EN 1561 EN-GJL-200
Base: ASTM A48-25B
Impeller: Stainless steel
Impeller: AISI 304
Impeller: EN 1.4301
Material code: A
Code for rubber: E
2/16
Company name:
Created by:
Phone:
Date: 13/10/2022
Qty. Description
1 CR 5-6 A-A-A-E-HQQE
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base
are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe
handling, and easy access and service. Power transmission is via a rigid split coupling.
The pump is fitted with a 3-phase, fan-cooled asynchronous motor.
Pump
A standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motor stool by means
of two coupling guards.
The pump head, pump head cover and flange for motor mounting is made in one piece. The pump head has a
combined 1/2" priming plug and vent screw.
The pump is fitted with a balanced O-ring seal unit with a rigid torque-transmission system.
This seal type is assembled in a cartridge unit which makes replacement safe and easy.
Due to the balancing, this seal type is suitable for high-pressure applications.
The cartridge construction also protects the pump shaft from possible wear from a dynamic O-ring between pump
shaft and shaft seal.
Date: 13/10/2022
Qty. Description
1 Seal faces:
• Rotating seal ring material: silicon carbide (SiC)
• Stationary seat material: silicon carbide (SiC)
This material pairing is used where higher corrosion resistance is required. The high hardness of this material pairing
offers good resistance against abrasive particles.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The base is made of cast iron. The oval flanges are bolted to the base. The outlet side of the base has a combined
drain plug and bypass valve. The pump is secured to the foundation by four bolts through the base plate.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. Electrical
tolerances comply with IEC 60034.
The motor efficiency is classified as IE2 in accordance with IEC 60034-30.
The motor does not incorporate motor protection and must be connected to a motor-protective circuit breaker which
can be manually reset. The motor-protective circuit breaker must be set according to the rated current of the motor
(I1/1).
Technical data
Liquid:
Pumped liquid: Water
Liquid temperature range: -20 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 1410 rpm
Rated flow: 2.9 m³/h
Rated head: 7.1 m
Pump orientation: Vertical
Shaft seal arrangement: Single
Code for shaft seal: HQQE
Approvals: CE,EAC,UKCA,SEPRO
Approvals for drinking water: WRAS,ACS
Curve tolerance: ISO9906:2012 3B
Materials:
Date: 13/10/2022
Qty. Description
1 Base: Cast iron
EN 1561 EN-GJL-200
ASTM A48-25B
Impeller: Stainless steel
EN 1.4301
AISI 304
Bearing: SIC
Installation:
t max amb: 40 °C
Maximum operating pressure: 16 bar
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Type of connection: Oval / Rp
Size of inlet connection: 1 1/4 inch
Size of outlet connection: 1 1/4 inch
Pressure rating for connection: PN 16
Flange size for motor: FT85
Electrical data:
Motor standard: IEC
Motor type: 71A
IE Efficiency class: IE2
Rated power - P2: 0.25 kW
Power (P2) required by pump: 0.25 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 220-240D/380-415Y V
Rated current: 1,30-1,42/0,75-0,82 A
Starting current: 410 %
Cos phi - power factor: 0.73-0.64
Rated speed: 1410-1430 rpm
Efficiency: IE2 72,4% - IE2 70,0%
Motor efficiency at full load: 72.4-70.0 %
Motor efficiency at 3/4 load: 72.6 %
Motor efficiency at 1/2 load: 68.3 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Motor No: 99928151
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.57
Net weight: 20.3 kg
Gross weight: 23.1 kg
Shipping volume: 0.063 m³
Date: 13/10/2022
11
10 100
9 90
8 80
7 70
6 60
5 50
4 40
3 30
2 20
1 10
0 0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 Q [m³/h]
P NPSH
[W] [m]
200 2.0
P1
150 1.5
100 P2 1.0
50 0.5
0 0.0
Date: 13/10/2022
H CR 5-6, 3*400 V, 50Hz eta
Description Value [m] [%]
Pumped liquid = Water
General information: Liquid temperature during operation = 20 °C
Product name: CR 5-6 A-A-A-E-HQQE 11 Density = 998.2 kg/m³
Impellers: 6 4 40
Number of reduced-diameter impellers: 0
Low NPSH: N 3 30
50
145 180
220
160
75
100
362
M10 X4
140
x
2 3.5
2
G 1/2 105
191
109
141
141
Code for rubber: E
Bearing: SIC
Installation:
191
t max amb: 40 °C
Maximum operating pressure: 16 bar 105
G 1/2 G 1/2
Max pressure at stated temp: 16 bar / 120 °C
Max pressure at stated temp: 16 bar / -20 °C
362
Connect code: A
Liquid:
Pumped liquid: Water HIGH VOLTAGE
DIRECTION OF ROTATION
Electrical data:
L1 L2
V
98.3169
Date: 13/10/2022
Description Value
Starting current: 410 %
Cos phi - power factor: 0.73-0.64
Rated speed: 1410-1430 rpm
Efficiency: IE2 72,4% - IE2 70,0%
Motor efficiency at full load: 72.4-70.0 %
Motor efficiency at 3/4 load: 72.6 %
Motor efficiency at 1/2 load: 68.3 %
Number of poles: 4
Enclosure class (IEC 34-5): 55 Dust/Jetting
Insulation class (IEC 85): F
Built-in motor protection: NONE
Motor No: 99928151
Controls:
Frequency converter: NONE
Others:
Minimum efficiency index, MEI ≥: 0.57
Net weight: 20.3 kg
Gross weight: 23.1 kg
Shipping volume: 0.063 m³
Date: 13/10/2022
eta
0.6 0.6
0.4 0.4
0.2 0.2
0.0 0.0
0 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 P2 [kW]
n P1
[rpm] [kW]
P1
1400 n 0.40
1300 0.30
1200 0.20
1100 0.10
1000 0.00
Date: 13/10/2022
M10 X 40
13.5
Rp 1 1/4
x
4
75
180
220
20
G 1/2
22
100
145
141
160
109
G 1/2
G 1/2
105
50
191 362
Date: 13/10/2022
HIGH VOLTAGE
DIRECTION OF ROTATION
L3
L1 L2
LOW VOLTAGE
DIRECTION OF ROTATION
L3
L1 L2
98.3169
Date: 13/10/2022
Order Data:
Position Your pos. Product name Amount Product No Total
CR 5-6 1 On request Price on
request
Date: 13/10/2022
( TM069451 for SMCR standard)
10a
10a 38 18
8 9 38
9 8
10 25
10
2
109
105
60
110 26
37
44a
1 1
7a
7 7a
2a 18
38 7 51
28 1a
38
69
36 28 36
25 32 32 49
7 76a 7 64
76a
7a 76 7a 76 65
45 4
7a 49
7a 64a
2a
7 80
28 7 1a 65
18
38 38 28 45 4a
36
25 36 32
32
7 76a
7 76a 7a 76 47a
76
7a 49
64c
66
67
65
7a 45 5a
1a 7
28 36
32
55
7 76a
76
7a
37
36
440b
440 441
6
440a 6 6
441 6
6 441a 38a
38 25a 25a 35
38 25a 25a
38 38
38
441b
56 56 35 441a 25a
56
441
Date: 13/10/2022
Spare parts CR 5-6, Product No. On request
Produced After 2121 (production year and week number)
Date: 13/10/2022
Pos Description Annotation Classification Data Part no. Qty. Unit
7a Combi Slot Torx screw 4
7 Coupling guard 2
- Kit, Gaskets 96455090 1 pcs
37 O-ring 2
38 O-ring 1
38 O-ring 2
109 O-ring Diameter: 22,00 1
Material type: EPDM
Thickness: 2,75
- Kit, Plug 96505133 1 pcs
- 18 Air vent screw 1
Spindle
Plug
23b Spindle 1
25 Plug 1
25 Plug 1
38 O-ring 1
38 O-ring 2
38 O-ring Diameter: 16,3 1
Material type: FKM
Thickness: 2,4
38 O-ring Diameter: 16,3 2
Material type: FKM
Thickness: 2,4
- Kit, Shaft seal HQQE 96455086 1 pcs
+ 105 Shaft seal Material type: HQQE 1
- Kit, Wear parts Material type: SIC 96455096 1 pcs
- 4a Chamber w. bearing cpl. 1
Vane
Retainer
Guide vane
Chamber
45 Neck ring
47 Bearing bush
65 Retainer
65 Neck ring retainer
45 Neck ring 6
47a Bearing ring 1
64c Clamp, splined Internal diameter: 8,5 1
Outer diameter: 15
64a Spacing pipe Length (mm): 13.00 1
65 Neck ring retainer 6
66 Wedge lock washer 1
67 Lock nut Thread: M8 1
441b Gasket 2
Motor 92509316 1 pcs
2a Pump head 96588151 1 pcs
+ 4a Chamber w. bearing cpl. 96547652 1 pcs
+ 4a Chamber w. bearing cpl. 98371274 1 pcs
- 4 Chamber cpl. 96547651 4 pcs
45 Neck ring 96547603 1
65 Retainer 97911446 1
+ 4 Chamber cpl. 98371272 4 pcs
+ 5a Chamber cpl. 98371269 1 pcs
6 Base 96588138 1 pcs
7a Combi Slot Torx screw 96886324 4 pcs
10 Shaft pin Diameter: 5 96536473 1 pcs
Length (mm): 26
Date: 13/10/2022
Pos Description Annotation Classification Data Part no. Qty. Unit
10 Shaft pin Diameter: 5 96587588 1 pcs
Length (mm): 26
+ 18 Air vent screw 96547461 1 pcs
+ 18 Air vent screw 95061351 1 pcs
- 25a Priming valve cpl. 96588242 1 pcs
38 O-ring 99198815 1
38 O-ring 99412727 1
25 Plug 96536013 1 pcs
26 Staybolt Length (mm): 187 98901997 4 pcs
Thread: M12
32 Washer Designation: DIN 125 A 99883474 4 pcs
Internal diameter: 13
Outer diameter: 24
Thickness: 2,5
36 Hex nut Thread: M12 96620479 4 pcs
37 O-ring 96547656 2 pcs
38 O-ring 99198815 2 pcs
38 O-ring 99412727 2 pcs
+ 44a Guide vane cpl. 96547658 1 pcs
+ 44a Guide vane cpl. 98681144 1 pcs
47a Bearing ring 97905743 1 pcs
47a Bearing ring 96547649 1 pcs
49 Impeller cpl. 96547648 6 pcs
49 Impeller cpl. 98394422 6 pcs
+ 51 Shaft, spline, cpl. 98368514 1 pcs
55 Outer sleeve 98811255 1 pcs
60 Formed wire spring 99935918 1 pcs
64c Clamp, splined Internal diameter: 8,5 98496968 1 pcs
Outer diameter: 15
64a Spacing pipe Length (mm): 13.00 96536452 1 pcs
64a Spacing pipe Length (mm): 13.00 98520104 1 pcs
64 Spacing pipe Length (mm): 26.0 96536304 4 pcs
66 Wedge lock washer 96536157 1 pcs
66 Wedge lock washer 92575609 1 pcs
67 Lock nut Thread: M8 98277008 1 pcs
69 Spacing pipe Length (mm): 2.00 96536451 1 pcs
+ 105 Shaft seal Material type: HQQE 96983415 1 pcs
441b Gasket 96536206 2 pcs
+ 441a Flange Thread: RP 1 96547454 2 pcs