Professional Documents
Culture Documents
Section-V
General/ISI Specification & list of approved makes
CSIDC F-1 Schedule-D-Section-V- Technical Tender Forms
Infrastructure development works for proposed Mega food park at village Baguad & Banjari, Thesil-Kurud, Distt.-Dhamtari (C.G.) CSIDC
GENERAL/ISI SPECIFICATIONS
The following list of Indian Standard as per latest amendment shall be applicable to the work
in general. However for other items also I.S.I. Specifications shall be followed, wherever
applicable even though the I.S Code is not specified below. Items not covered in the
IndianStandards shall be referred in British / American standards, as amended and in addition
particular conditions and specifications shall be followed.
23. 432-1966 Mild steel and medium tensile steel bars & hard drawn steel
wire & concrete reinforcement.
24. 432 (PT-I) 1966 Mild steel and medium tensile bards.
25. 516-1959 Methods of test for strength of Concrete.
26. 1139-1966 Hot rolled mild steel, medium tensile steel & high yield strength
steel deformed bars for concrete reinforcement.
27. 1199-1959 Method of sampling & analysis of concrete.
28. 1566-1967 Hard drawn steel wire fabric for concrete reinforcement.
29. 1786-1979 Cold drawn steel wire fabric for concrete reinformcements.
30. 1200 (PT-V) 1972 Method of Measurement of cement concrete work.
31. 1200 (PT-V) 1972 Method of Measurement of form work.
32. 2502-1963 Code of Practice for bending and fixing of bars for concrete
reinforcement.
33. 1077-1970 Common burnt clay building bricks.
34. 1200 (PT-III) 1970 Method of Measurement of Brick work.
35. 2212-1962 Code of Practice for Brick work.
36. 3102-1971 Classification of burnt clay solid bricks
37. 3495 (PTS-I to V) Method of test for clay building work.
38. 5454-1974 Method for sampling of clay building bricks.
39. 1122-1974 Methods for determinationof specification of specific gravity &
porosity of natural building stones.
40. 1124-1974 Methods of test for water absorption of natural bldg.stones.
41. 1130-1969 Marble (CAPACIs, slabs & tiles)
42. 205-1966 Non Ferrous metal butt hinges.
43. 206-1973 Tee and strap hinges.
44. 287-1973 Recommendation for maximum permissible moisture contents
of timber used for different purposes.
45. 303-1975 Plywood for General Purpose.
46. 451-1972 Technical supply condition for woood screws.
47. 723-1972 Steel counter sunk head wire nails.
48. 1003 Timber paneledand glazed shutters.
49. 1003 (PT.I) 1966 Door Shutters.
50. 1003 (PT.II) 1966 Window&VentilatorShutters.
79. 1200 (PT.VIII) 1974 Method of Measurements of steel work and iron works.
80. 1599-1974 Method for bend test for steel products other than sheet, strip,
wire and tube.
81. 1608-1972 Method of Tensile testing of steel products.
82. 1977-1975 Structural Steel (Ordinary Quality).
83. 2062-1984 Structural Steel (Fusion Welding Quality).
84. 4351-1967 Steel door frames.
85. 777-1970 Glazed earthen ware tiles.
86. 1130-1969 Marble (blocks, slabs and tiles).
87. 120 (PT.XI) 1971 Method of Measurements of paving and floor finishes.
88. 1237-1959 Cement Concrete Flooring Tiles.
89. 1443-1972 Codes of Practice for laying & finishing of cement concrete
floor in Tiles.
90. 1661-1972 Code of Practice for Applicagtion of cement lime plaster
finishes.
91. 2571-1971 Code of Practice for laying in situ cement concrete.
92. 102-1962 Ready mixed paint, brushing, Red, lead nonsetting, priming.
93. 103-1962 Ready mixed paint, brushing, white lead, for priming and
general purposes.
94. 133-1975 Enamel, internir (A) under coating (n) Finishing colour as
required.
95. 137-1965 Ready mixed paint, brushing, mat or egg shell flat, finishing,
interior to Indian Standard colour as required.
96. 158-1968 Ready mixed paint, brushing bituminous, black, lead free, acid
alkali water and heat resisting for general purposes.
97. 218-1961 Creosote and anthracene oil for use as wood preservative.
98. 1200 (PT.XII) 1971 Method of Measurements of plastering and pointing.
99. 1200 (PT.XIII) 1970 Method of Measurements of White washing, colour washing,
distempering and other finishes.
100. 1200 (PT.XV) 1968 Method of Measurement of Painting.
101. 5410-1969 Cement Paint, colour as required.
102. 5411 (PT.I) 1969 Plastic emulsion paint for interior use.
103. 6278-1971 Code of Practice for white washing & colour washing.
104. 5916-1970 Safety of Practice for white washing & colour washing.
For the items missing in the list, the relevant IS Code and specification should be binding on
the contractor.The contractor should take approval wrt the approved vendor list prior to any
procurement from the Engineer in charge. Further , contractor shall procure “or equivalent as
approved” after getting the approval of Engineer in Charge ,only if the approved makes
mentioned in the” list of approved makes” is not avilable in the market.All makes mentioned
below in various sections will be applicable for the entire work package irrespective of sections.
73. Aluminium Structural Members Hindalco Industries Ltd, Jindal Aluminium Ltd,
IndalcoAlloys .
69 Pipe clamp and support Chill / euro clamping / Hi-tech/ KML Classic