Professional Documents
Culture Documents
This project is used to stop the elevator from the damage that occurs due to heavy load
IR sensors for detecting the persons who enter into the elevator & increases the cou
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 1/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
This increased count can be displayed on the seven segment display for indicating the
elevator at a fixed time.
This project uses a buzzer to generate the ring once the number of people within the
the limit. This buzzer will stop automatically once the number of people within the elev
the counter number will be decreased.
This project implements a system for opening the door automatically depending on the m
This project is used in offices, hotels, shopping malls to open the door automatically by
near the door. This can be achieved by using PIR sensors by detecting infrared energy
This signal can be processed & the door is opened as well as closed depending on this d
When a person reaches the range of the sensor, then it detects the person & sends a
door and it closes the door in a precise time delay if there is no motion at the door. Furth
be improved by including a counter device so that number of persons can be tracked ins
This project is used to position a dish at an exact angle to get the maximum signal thro
This project can be built with an 8051 family microcontroller by interfacing with two
microcontrollers can generate commands to control the directions of dish movements in
horizontal.
By using the IR remote, the transmission of coded signals can be done from transmitte
receiver decodes the signal & transmits it to the microcontroller to start the motors
movements using the motor driver IC. The code used by the TV remote is RC5 code an
recognized through a microcontroller for generating suitable signals.
This project detects the temperature of a device when it gets overheated. This proje
machines get overheated like industries and factories. The sensor used in this sy
temperature sensor for detecting temperature & transmits the data toward the microcontr
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 2/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
Further, this microcontroller processes data & transmits the temperature to display on the
temperature can be controlled through four pushbuttons and the power supply can b
system by using a 12V transformer. If the system increases the temperature to a set l
can be generated.
This project implements a system to control the street light based on vehicle detect
project, the energy is conserved through detecting the vehicle movement on highways to
of a street light in front of it & turns off the switching lights simultaneously.
Telephone Router
Nowadays, the usage of electronic devices is increasing. Similarly, devices like EVMs a
purposes. Here, the proposed system is implemented namely a cellular voting
microcontroller. This system includes two units namely a master & voting.
The voting unit can be arranged anywhere & the master unit can be arranged within a
unit mainly includes a DTMF decoder that produces a DTMF tone & can be sent to the
the FM transmitter.
The master unit includes a DTMF decoder, FM receiver, Display unit & Microcontrolle
from the voting unit can be obtained through the receiver and is decoded and specific fu
out by microcontroller and then it is displayed.
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 3/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
The barcode decoder using a microcontroller can be used to decode code 39. This
barcode symbology for encoding alphanumeric data strings. This code is used in many
requirements of labels. The decoders like HP barcoders are used in badges as well as
give an outstanding scanning performance.
Whenever a barcoded-based card is swiped then the slot reader provides a stream
changing widths. The count equivalent to these pulse widths is stored within the RA
Corporation implemented it to evaluate the pulse widths which are stored using the ch
output of the decoded can be demonstrated on the LCD.
This project implements a single-phase induction motor for a smooth start. This proje
defend this motor using a low voltage supply at begin & after that to increase the volta
motor very smoothly. Because of the interrupt within the voltage supply at begin, the ind
get damage & in some cases, the motor windings can also be damaged. Therefore, t
targets to provide a smooth start using the SCR firing angle control concept.
Some more electrical project ideas for diploma students include the following.
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 5/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
47. Auto Power Supply Control from 4 Different Sources: Solar, Mains, Generator & In
No Break
48. Speed Control Unit Designed for a DC Motor
49. Accident Alert in Modern Traffic System with Camera
50. PIR Based Energy Conversation System for Corporate Computers and Lighting sy
Electronics Projects
In addition to the electrical projects, the following is a list of electronics projects for
particularly for the sake of those students who have an interest in electronics. We are
ideas with a variety of project topics that fulfills their necessities. This article consists o
projects list
This project implements a system for avoiding gas as well as fire accidents by detecting t
The proposed system includes both the sensors like fire and gas for the purpose of detec
system detects the leakage of gas, then it turns off the gas supply to evade more gas lea
immediately gives an alert to the concerned person via an SMS through GSM. Similarly,
a fire sensor to detect the fire and informs the authorized person so that he takes the req
This project designs a system to indicate the brake failure of an automobile. At present, t
faced commonly by different vehicles which cause too many accidents. To overcome this
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 6/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
In this project, the brake condition can be checked through the microcontroller. The micro
this project is PIC16F877 otherwise 89C51. The type of brake system used in the four-w
or air pressure type. So this project supports both types. The connection of the braking s
done using a pressure tank. The pressure within the tank can be detected by the pressur
that, that sensor that generates the signal can be amplified to some level of voltage level
the analog to digital converter.
This converter converts the signal from analog to digital and sends it to Microcontroller. If
pressure is less, the Microcontroller triggers an alarm using the driver circuit to alert the r
range can be displayed on an LCD display.
Patient data acquisition, as well as transmission, is the most significant topic within medi
recent enhancements within the technology are improving to provide the best solutions fo
diagnostics & therapy.
This project is used to implement a system for transmitting the biomedical data wirelessly
real-time. The biomedical sensors used in this system are heart rate, accelerometer & sk
The wireless communication is used to provide sensor data toward a PC to perform data
real-time.
This project implements a simple as well as useful visual ac mains voltage indicator. This
indicate the AC mains voltage level using three dissimilar LEDs. This project is very simp
especially for beginners.
This system provides a visual indication for the AC mains voltage that ranges from 160v
system uses a number of LEDs to specify the voltage level. The LEDs will turn off for < 1
voltage.
In an automatic phase shifter, the 3 phase power supply is R, Y, B. Once the R phase po
three-phase cuts, then we can get the Y phase-only & B phase can get at the output. So
phase cannot work.
If we use an automatic phase shifter then it will automatically adjust & we can get supply
phases without any power loss. If both the phases like R & Y is not coming from the elec
the electrical load present within the phase will not function, so by using an automatic ph
can work with all the phases. So this system is applicable for both domestic as well as co
At present, road accidents have been occurring due to several reasons like careless driv
not following the rules, etc. So the proposed system implements a system for detecting th
car. This system detects once the car speed once it crosses the maximum limit of speed
This project includes three categories like detection of speed, acquisition of image & ima
The speed detecting device mainly works with the Doppler effect using a microwave Dop
The car speed can be estimated using the preset threshold & immediately camera is acti
speed increased. The image transfer and acquisition can be done using an HD camera t
with Raspberry pi & it is connected to the server through the internet.
The server includes the program for image processing to separate the frame of license fr
The number plate characters can be digitized & sends to the authority existing in the upc
wherever the car is heading.
This project is used to implement a system for controlling the level crossing of the railway
Android-based device that can be operated by the railway station master.
In general, a railway level crossing gate can be opened or closed by the station master m
overcome this, the proposed system is used to control the crossing motor gate through th
with a phone by sending commands to a microcontroller for getting an output to drive a re
gate motor.
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 8/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
Some more electronics project ideas for diploma students include the following.
1. Biomedical Data Transmission System with Central Monitoring and Controlling Syst
2. Microcontroller based Digital Card Dash Board with Data Recording Facility
3. Gas and Fire Accident Avoiding System
4. Operation of Dam Based On the Level of Water
5. Health and Position of Soldier Tracking SystemAlcohol Detecting Alarm
6. Attendance Management with Face Recognition System
7. A Bi-Directional Visitors Counter
8. The indication of Brake Failure for Four Wheeler
9. Function Generator with Frequency Counter
10. Fuse Tube light Glower without any Choke
11. Single-Phase Multilevel Inverter SPWM with Personal Computer Interface and OLM
12. Intelligent Automatic Three-Phase Shifter System
13. Visual AC Mains Voltage Indicator
14. Advances in Renewable Energy Sources
15. Wireless Petroleum Tank Monitor
16. Multi-Power Utilizer Maximum-Demand Indicator and Power-Factor Indicator
17. Sensorless Speed Control of Active Current Induction Motor Using Microcontroller
18. Temperature Adjustable Heating System by Using Power Electronic Devices
19. Weather Reporting Based on GSM
20. Heart Beat Sensor-based Detection of Heart Attack
21. Authentication of Exam Hall using Fingerprint
22. Voting System based on Finger Print
23. RFID based Billing System
24. The door unlocked system using GSM
25. Detection of Car Over speed
26. Arduino Based Home Automation
27. Arduino Based Underground Cable Fault Detection
28. Incoming Phone Ring Flasher
29. Electronic Eye Controlled Security System
30. Android-based Remotely Programmable Sequential Load Operation
31. Home Automation by Android Application Based Remote Control
32. Android Application Controlled Remote Robot Operation
33. Remote Operated Domestic Appliances Control by Android Application
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 9/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 10/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
All of these diploma project ideas in the above list are of the latest and real-time projects
suitable for the electronic and electrical diploma. Furthermore, if you want any help
these projects, you can write to us in the comment section below.
Photo Credits: ganpatielectricals
‹ PREVIOUS
Introduction to Embedded M
Brief History of Electronics and Their
and I
Development
RELATED CONTENT
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 11/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 12/13
9/19/22, 7:15 PM Diploma Projects for Electronics and Electrical Diploma Students
https://www.elprocus.com/electronics-and-electrical-projects-for-diploma-students/ 13/13