Professional Documents
Culture Documents
Dokumen : SD / QMS - QA - 12
PT. PLATINUM CERAMICS INDUSTRY SUPPORTING DOCUMENT
Revisi : 05
Tanggal : 26 - 11 - 20
JUDUL : TECHNICAL SPECIFICATION
Halaman : 1 dari 1
Side dimensions % of the average work size ISO 10545-2 ± 0.60 % ± 0.25 % ± 0.40 % ± 0.50 % ± 0.25 %
Thickness % of the average work thickness ISO 10545-2 ± 5.00 % ± 4.00 % ± 4.00 % ± 10.0 % ± 3.00 %
Side straightness % of the work sizes ISO 10545-2 ± 0.50 % ± 0.20 % ± 0.20 % ± 0.30 % ± 0.20 %
Rectangularity % of the work sizes ISO 10545-2 ± 0.60 % ± 0.30 % ± 0.30 % ± 0.50 % ± 0.25 %
Centre curvature % of the calculated diagonal work sizes ISO 10545-2 ± 0.50 % -0.10 % to +0.30 % -0.10 % to +0.30 % -0.30 % to +0.50 % -0.10 % to +0.30 %
Edge curvature % of the work sizes ISO 10545-2 ± 0.50 % -0,10 % to +0.25 % -0,10 % to +0.25 % -0.30 % to +0.50 % -0.10 % to +0.25 %
Warpage % of the calculated diagonal work sizes ISO 10545-2 ± 0.50 % ± 0.20 % ± 0.20 % ± 0.50 % ± 0.20 %
Water absorption % by weight ISO 10545-3 6.0 % < E < 10.0 % 6.0 % < E ≤ 10.0 % 6.0 % < E ≤ 10.0 % 10.0 % < E < 20.0 % 10.0 % < E ≤ 20.0 %
Modulus of rupture N / mm2 ISO 10545-4 > 18 N/mm2 ≥ 22 N/mm2 ≥ 22 N/mm2 > 15 N/mm2 ≥ 18 N/mm2
Abrasion resistance ( PEI test method ) ISO 10545-7 Required Class III to IV Class III to IV Not required Class II to III
Autoclave test Autoclave test Autoclave test Autoclave test Autoclave test
Crazing resistance ISO 10545-11 5 bar & 6.5 bar & lasts 6.5 bar & lasts 5 bar & 6.5 bar & lasts
lasts 2 hours 2 hours passed 2 hours passed lasts 2 hours 2 hours passed
Chemicals resistance ISO 10545-13 Resistant Resistant Resistant Resistant Resistant