Professional Documents
Culture Documents
Spindle speed
Spindle position
Table position
All of these
7. During the execution of a CNC part program block N020 G02 G91 X45 Z40…..,
G02 and G91 refers to
8. In a NC machining operation the tool has to be removed from point (5, 4) to point
(7,2) along the circular path with center at (5, 2) . Before starting the operation
the tool is at (5, 4). The correct G and M code motion is
M99,M48,M10,M09,M04,G35,G42,G74,G94,G99
G49,G83,G82,G81,G99,M07,M00,M60,M02,M05
11. Which type of LAN cable is used to Barcode reader and PC?
12. In what way RFID reader are basically classified and give example for each?
13. What is the highest bandwidth that can used in RFID Module kit?
16. Gear motors typically have an overall efficiency of _____ as compared to _____ for
piston motors.
17. The drawback of tandem cylinder is that it is _______ than a standard cylinder,
achieves an equal speed because flow must go to _______
18. In 4/3 DCV, for float neutral, the ------- is blocked and the outlet is connected to
the tank.