Professional Documents
Culture Documents
... dry-tech bearings ... 2017 ... plastics for longer life
® ®
.bearings
... linear systems and ball bearings
1 Polymer plain bearings From page
Service life calculation online
19
ww.igus.eu/dry-tec Online product finder
531
Improve technology and save costs 3 Slewing ring bearings From page
igus® dry-tech® bearings offer an alternative to lubricated plain, linear and roller
bearings. igus® develops tribopolymers for continuous dry-running operation.
Product finder and service life calculation online 579
By avoiding lubrication, dry-tech® polymer technology attains superior service
life: from –100 °C up to +250 °C at continuous exposure, from cleanrooms to 4 iglidur® for design freedom From page
extreme dirt exposure, from vacuum to extreme humidity. Service life calculation online
Online product finder 607
Available from stock.
Ready for delivery in 24–48h, earlier upon request.
5 iglidur® Tribo 3D printing From page
645
The delivery times indicated correspond to the average time until the ordered
goods are dispatched. 3D printing service online
lubrication-free
made easy
Plastic instead of metal: longer service life
and 40 % cost saving
iglidur® plastic plain bearings from igus® are lubrication-
free, maintenance-free, cost-effective and versatile. They
are suitable for mass-produced automotive products or
for the construction of special machines, for underwater
applications, for the food and tobacco industry, for extreme
resistance to chemicals and temperature fluctuations or for
simple metal-sheet bearings: iglidur® bearings always offer
a solution - either from the product range in the catalogue
or as a special customised bearing solution – minimum
quantity 1!
For more than 30 years, iglidur® bearings, which conform
with RoHS, have been a technically and economically
advantageous alternative to metal bearings of all kinds.
The industry's biggest test laboratory with approx. 15,000
tests per year enables reliable predictability.
Resistant to dirt with igus®. No lubrication with igus®. No maintenance with igus®. Corrosion-free with igus®.
Zero-maintenance and dirt resistance The lubrication free design of iglidur® Various iglidur ® materials for wide Low weight, corrosion resistance
are not the only advantages of drylin®. also permits its use in the food and variety of operating conditions. Large as well as zero maintenance and
Cost down, life up! pharmaceutical industries. Don't wait program of dimensions compatible lubrication achieve solutions for nearly
any longer! with nearly all applications. all types of applications. Fit and forget!
Predictable service life!
2
Reduce process
costs: bearings
online
For every product in this catalogue, there is a special quick
link or direct online pointer to further details, data and facts.
These include:
●● Online tools for calculating service life
●● 3D-CAD files
●● DXF data
●● Download current catalogues, brochures, videos and
assembly instructions
●● Application pictures
●● Imperial dimensions
●● Personal support
●● Catalogue and sample ordering "Search"
●● Online price list and online shop iglidur® product finder
Find the right bearing for your
Over 30 helpful online tools for quick finding, configuring application with few clicks
and calculating your product. No registration necessary.
3D-CAD models online for downloading. Easy to use.
ORDER
iglidur® online catalogue
he online catalogue is just a click away. See all impor-
T
tant product details, information and tools by clicking
again on the corresponding link.
4
Quality from the
igus laboratory ®
More than 12,000 tribological tests per year ... 1,000 customer tests per year ... ... or heavy duty tests up to 250 MPa
www.igus.de/dry-tech-labor-film
on 53 test rigs ...
8.0 9
7.0 8
6.0 7
6
5.0
5
4.0
Wear [µm/km]
Wear [µm/km]
4
3.0 3
2.0 2
1.0 1
0.0 0
0 1 2 3 4 5 0 1 2 3 4 5
0.5 4.0
3.5
0.4
Coefficient of friction μ
3.0
Automatic screw steel
0.3 2.5
Cf53, hard-chromed
2.0
High grade steel
HR carbon steel
Wear [µm/km]
0.2 1.5
1.0
304 SS
0.1
Cf53
0.5
0.0 0.0
0 10 20 30 40 50 60 70 80
Shaft material
Load [MPa]
The results of more than 15,000 tests are fed to our database
annually.
RoHS
ISO 9001:2008 TS16949
8
The flexible
igus factory ®
10
Fit and forget
For all tasks – the appropriate solution in
any batch size from stock
Different industries need different solutions. From mechanical
engineering, automotive assembly or medical technology,
to the robotics industry - igus® offers customised solutions
for specific applications. igus® already has many years of
experience and specialised resources for many industries
If your industry is not listed, please let us know. We're here
No lubrication necessary in the overload element Extremely wear-resistant iglidur® bearings in a drylin® linear guiding system in the EURO-C welding
to help.
of carat 9 (intensive grubber). hip joint system. tongue for the automotive industry.
Lead screw unit with accessories ensures speedy, Flexible without fault: Adjustable camera tripod igubal® rod end bearings made from plastic display
precisely repeatable format adjustments. with drylin® W bearings for quiet operation. their strength in the demanding environment.
12
Worldwide
individual
consultation
by igus – by ®
phone or at your In a face-to-face meeting Technical consultation at your premises Worldwide open offices – for example in China
premises
igus® is close to you.
35 subsidiaries worldwide.
the customer
Plug valve catalogue, material: rod end guide linear guide bearings design: igubal® coupling ted slewing ring sys- Tribo-Tape made of solid wear
for the company 8 pages iglidur® G systems systems Ø 10-100 mm bars tems with universal plastic and resistant com-
Pierburg glide elements carbon fibre ponents
since 1964
From a garage to the global market with
tribopolymers 1993 2003 2007 2009 2011 2012 2013 2014 2015 2016
What began in 1964 with a single injection moulding First drylin® W drylin® ZLW robolink® drylin® E – drylin® SLN High efficiency: iglidur® tribo- Cost-effective, drylin® carria-
drylin® R modular linear Toothed belt joints linear axes miniature linear dryspin® high filament for lightweight and ge for curved
machine in a garage in Cologne has within half a century linear round guide systems axes with stepper axes helix screw 3D printing modular: robo- rail
become a global enterprise. It all started more than 50 years shaft guide motor drives link® D
10 27
8,000
16 3 1,000
igus® WebGuide – the "TV guide" for engineers
The WebGuide is the first technical printed catalogue that
is entirely designed as a quick online guide, On selection of
the desired product it leads straight to the internet. "Zap-
ping" online ... find, configure, order ... followed by speedy
delivery. Also available as an App for Android and iOS.
More information www.igus.eu/webguide
Legal information: The information in this catalogue, and the data in the Design section in particular, is based on our current knowledge of the products
described. A legally binding assurance of certain properties or the suitability for a certain application cannot be derived. igus® is unable to assume liability
of any nature for damage, loss or injury resulting from application of the products. Due to constant technical development, we reserve the right at all
times to make technical changes and improvements to the products. Subject to printing errors.
Our offers are exclusively directed to dealers / resellers. The delivery times indicated correspond to the time until the goods are dispatched, whe-
reby transport costs are not included in the price. We recommend that you always check the suitability of the products for a particular purpose
in a practical trial. Please avail of our consulting services.
All products that are marked "New" in the catalogue have been added since the last version of the catalogue was published in August 2016.
The terms "igus", "chainflex", "CFRIP", "conprotect", "CTD", "drylin", "dry-tech", "dryspin", "easy chain", "e-chain", "e-chain systems", "e-ketten", "e-
kettensysteme", "e-skin", "energy chain", "energy chain systems", "flizz", „iglide“, "iglidur", "igubal", "invis", "manus", "motion plastics", "pikchain",
"readychain", "readycable", "speedigus", "triflex", "twisterchain", "plastics for longer life", "robolink", "xiros", "xirodur" and "vector" are legally protected
trademarks of the igus® GmbH/Cologne in the Federal Republic of Germany and, where applicable, in some foreign countries.
iglidur...
Polymer plain bearings
...
...
...plastics
Application examples: iglidur®
All-rounder-
materials for The classic The robust all-rounder Specialist for pivoting, The cost-effective Versatile and Low-cost material
general purpose all-rounder: according to DIN 2795: rolling applications and outdoor all-rounder: cost-effective: for mass production:
iglidur® G iglidur® M250 more: iglidur® P210 iglidur® P iglidur® K iglidur® GLW
Page 79 Page 95 Page 105 Page 113 Page 123 Page 131
Endurance
runner-
materials The versatile The classic endurance Specialist for Endurance runner with high dimen Ideal for plastics Endurance runner For fast rotating
for long long distance runner: runner up to 30 MPa: pulsating loads: sional stability at high temperature: shafts: up to +180 °C: applications:
service life iglidur® J iglidur® W300 iglidur® J3 iglidur® J350 iglidur® J260 iglidur® W360 iglidur® L250
Page 141 Page 153 Page 165 Page 23 Page 181 Page 189 Page 197
For high rotational For extreme rotational Low-cost: Low-cost Specialist for
speeds: speeds: with silicone: aluminium shafts:
iglidur® L350 iglidur® L500 iglidur® R iglidur® D iglidur® J200
Page 205 Page 213 Page 221 Page 229 Page 235
Materials for
use at high The chemical and Extremely long service life The high temperature For soft shafts and All-rounder for steam For hot
temperatures temperature specialist: under extreme conditions: specialists up to +250 °C: high temperatures: sterilisation: liquids:
iglidur® X iglidur® Z iglidur® X6 iglidur® V400 iglidur® HSD350 iglidur® UW500
Page 245 Page 255 Page 265 Page 273 Page 281 Page 287
iglidur® plain bearings made from tribo plastics: High media resistance
Materials with
good media Endurance runner with Extremely long service life The classic with high High temperature The Low cost specialist
resistance high media resistance: under water: resistance to media and endurance runner: for chemicals and
iglidur® H1 iglidur H370
®
temperature: iglidur® H iglidur® C500 temperatures: iglidur® H2
Page 297 Page 305 Page 313 Page 321 Page 329
22 23
iglidur® plain bearings | Product overview
iglidur® plain bearings made from tribo plastics: For contact with food
Materials
for contact The universal bearing for The endurance runner at higher The media and temperature The "Food-all- The "food-classic" for "Food" bearing with high The Robust:
with food contact with food: temperatures in the food sector: specialist in the food sector: rounder": low speeds: media resistance
iglidur® A181 iglidur® A350 iglidur® A500 iglidur® A180 iglidur® A200 up to +90 °C: iglidur® A160 iglidur® A290
Page 339 Page 347 Page 355 Page 363 Page 371 Page 382 Page 389
iglidur® plain bearings made from tribo plastics: For contact with food
iglidur® plain bearings made from tribo plastics: For high loads
Materials
for heavy duty The durable heavy duty The peak of Heavy-duty The high load bearing up to
applications bearing: stability: on soft shafts: 200 MPa static and 140 MPa
iglidur® Q2 iglidur® Q iglidur® Q290 dynamic: iglidur® TX1
Page 415 Page 423 Page 431 Page 437
Materials
for special
application Electrically conductive: ESD compatible The automotive For fast rotation The biopolymer: Low-cost all-rounder Versatile and
areas all-rounder: standard: under water: for fire protection: cost-effective:
iglidur® F iglidur® F2 iglidur® H4 iglidur® UW iglidur® N54 iglidur® G V0 iglidur® J2
Page 449 Page 457 Page 465 Page 473 Page 481 Page 489 Page 497
24 25
iglidur® plain bearings | Selection according to main criteria
iglidur® G M250 P210 P K GLW J W300 J3 J350 J260 W360 L250 L350 L500 R D J200
Installation tolerances E10 D11 E10 E10 E10 E10 E10 E10 E10 F10 E10 E10 E10 F10 F10 E10 E10 E10
Descriptive technical specifications
Resistant to impacts/shock
Resistant to dirt
Corrosion free
Electrically conductive
RoHS-II 2011/65/EC
Fire class in accordance with UL-94 HB V-2 HB HB HB HB HB HB HB V-0 V-2 HB HB V-0 V-0 HB HB HB
Availabilities / variants
Type S, sleeve
Stock plate
Tribo-Tape liner
26 27
iglidur® plain bearings | Selection according to main criteria
iglidur® X Z X6 V400 HSD350 UW500 H1 H370 H C500 H2 A181 A350 A500 A180 A200 A160 A290
Installation tolerances F10 F10 F10 F10 F10 F10 F10 F10 F10 F10 F10 E10 F10 F10 E10 D11 E10 D11
Descriptive technical specifications
Resistant to impacts/shock
Resistant to dirt
Corrosion free
Electrically conductive
RoHS-II 2011/65/EC
Fire class in accordance with UL-94 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 V-0 HB V-0 V-1 HB V-2 HB HB
Availabilities / variants
Type S, sleeve
Stock plate
Tribo-Tape liner
28 29
iglidur® plain bearings | Selection according to main criteria
iglidur® UW160 T220 Q2 Q Q290 F F2 H4 UW N54 G V0 J2 AB RW370 B C
Installation tolerances E10 E10 E10 E10 D11 D11 E10 F10 E10 E10 E10 E10 E10 F10 D11 D11
Descriptive technical specifications
Resistant to impacts/shock
Resistant to dirt
Corrosion free
Electrically conductive
RoHS-II 2011/65/EC
Availabilities / variants
Type S, sleeve
Stock plate
Tribo-Tape liner
30 31
iglidur® plain bearings | Material properties table
iglidur® Unit G M250 P210 P K GLW J W300 J3 J350 J260 W360 L250 L350 L500 R D J200
General properties
Density [g/cm3] 1.46 1.14 1.40 1.58 1.52 1.36 1.49 1.24 1.42 1.44 1.35 1.34 1.5 1.54 1.53 1.39 1.4 1.72
Colour
Max. water absorption [% weight] 4.0 7.6 0.5 0.4 0.6 5.5 1.3 6.5 1.3 1.6 0.4 1.6 3.9 1.4 0.3 1.1 1.1 0.7
Coefficient of sliding friction, dynamic, 0.08– 0.18– 0.07– 0.06– 0.06– 0.10– 0.06– 0.08– 0.06– 0.10– 0.06– 0.07– 0.08– 0.15– 0.19– 0.09– 0.08– 0.11–
[µ]
against steel 0.15 0.40 0.19 0.21 0.21 0.24 0.18 0.23 0.20 0.20 0.20 0.21 0.19 0.20 0.26 0.25 0.26 0.17
pv value, max. (dry) [MPa · m/s] 0.42 0.12 0.4 0.39 0.3 0.3 0.34 0.23 0.5 0.45 0.35 0.35 0.4 3.0 4.0 0.27 0.27 0.3
Mechanical properties
Flexural modulus [MPa] 7,800 2,700 2,500 5,300 3,500 7,700 2,400 3,500 2,700 2,000 2,200 3,829 1,950 15,882 12,015 1,950 2,000 2,800
Flexural strength at +20 °C [MPa] 210 112 70 120 80 235 73 125 70 55 60 119 67 210 201 70 72 58
Shore-D-Hardness 81 79 75 75 72 78 74 77 73 80 77 n.s. 68 80 81 77 78 70
Thermal conductivity [W/m · K] 0.24 0.24 0.25 0.25 0.25 0.24 0.25 0.24 0.25 0.24 0.24 0.24 0.24 0.61 0.45 0.25 0.25 0.24
Electrical properties
Specific contact resistance [Ωcm] > 1013 > 1013 > 1012 > 1013 > 1012 > 1011 > 1013 > 1013 > 1012 > 1013 > 1012 > 1013 > 1010 > 105 > 1010 > 1012 > 1014 > 108
Surface resistance [Ω] > 1011 > 1011 > 1011 > 1012 > 1012 > 1011 > 1012 > 1012 > 1012 > 1010 > 1010 > 1012 > 1011 > 105 > 1012 > 1012 > 1014 > 108
32 33
iglidur® plain bearings | Material properties table
iglidur® Unit X Z X6 V400 HSD350 UW500 H1 H370 H C500 H2 A181 A350 A500 A180 A200 A160 A290
General properties
Density [g/cm3] 1.44 1.4 1.53 1.51 1.39 1.49 1.53 1.66 1.71 1.37 1.72 1.38 1.42 1.28 1.46 1.14 1.00 1.41
Colour
Max. water absorption [% weight] 0.5 1.1 0.5 0.2 1.2 0.5 0.3 0.1 0.3 0.5 0.2 1.3 1.9 0.5 1.3 7.6 0.1 7.3
Coefficient of sliding friction, dynamic, 0.09– 0.06– 0.09– 0.15– 0.07– 0.20– 0.06– 0.07– 0.07– 0.07– 0.07– 0.10– 0.10– 0.26– 0.05– 0.10– 0.09– 0.13–
[µ]
against steel 0.27 0.14 0.25 0.20 0.23 0.36 0.20 0.17 0.20 0.19 0.30 0.21 0.20 0.41 0.23 0.40 0.19 0.40
pv value, max. (dry) [MPa · m/s] 1.32 0.84 1.35 0.5 0.3 0.35 0.80 0.74 1.37 0.7 0.58 0.31 0.40 0.28 0.31 0.09 0.25 0.23
Mechanical properties
Flexural modulus [MPa] 8,100 2,400 16,000 4,500 2,150 16,000 2,800 11,100 12,500 3,300 10,300 1,913 2,000 3,600 2,300 2,500 1,151 8,800
Flexural strength at +20 °C [MPa] 170 95 290 95 67 260 55 135 175 100 210 48 110 140 88 116 19 250
Shore-D-Hardness 85 81 89 74 77 86 77 82 87 80 88 76 76 83 76 81 60 88
Thermal conductivity [W/m · K] 0.60 0.62 0.55 0.24 0.24 0.6 0.24 0.5 0.6 0.24 0.24 0.25 0.24 0.24 0.25 0.24 0.30 0.24
Electrical properties
Specific contact resistance [Ωcm] < 105 > 1011 < 105 > 1012 > 1013 < 109 > 1012 < 105 < 105 > 1014 > 1015 > 1012 > 1011 > 1014 > 1012 > 1013 > 1012 > 1011
Surface resistance [Ω] < 103 > 1011 < 103 > 1012 > 1014 < 109 > 1011 < 105 < 102 > 1013 > 1014 > 1012 > 1011 > 1013 > 1011 > 1012 > 1012 > 1011
34 35
iglidur® plain bearings | Material properties table
General properties
Density [g/cm3] 1.04 1.28 1.46 1.4 1.27 2.1 1.25 1.52 1.79 1.52 1.13 1.53 1.44 1.11 1.34 1.15 1.1
Colour
Max. water absorption [% weight] 0.1 0.5 4.6 4.9 9.3 0.1 8.4 0.4 0.2 0.8 3.6 4.0 1.3 1.6 1.2 6.3 6.9
Coefficient of sliding friction, dynamic, 0.17– 0.20– 0.22– 0.05– 0.14– 0.09– 0.10– 0.16– 0.08– 0.15– 0.15– 0.07– 0.11– 0.18– 0.13– 0.18– 0.17–
[µ]
against steel 0.31 0.32 0.42 0.15 0.26 0.37 0.39 0.22 0.25 0.35 0.23 0.20 0.27 0.31 0.17 0.28 0.25
pv value, max. (dry) [MPa · m/s] 0.22 0.28 0.7 0.55 0.70 0.89 0.34 0.31 0.70 0.11 0.5 0.5 0.23 0.25 1.2 0.15 0.10
Mechanical properties
Flexural modulus [MPa] 1,349 1,800 8,370 4,500 3,074 12,000 11,600 7,418 7,500 9,600 1,800 7,900 3,605 1,850 2,997 1,800 1,900
Flexural strength at +20 °C [MPa] 22 65 240 120 97 55 260 93 120 90 70 140 101 50 100 55 60
Thermal conductivity [W/m · K] 0.50 0.24 0.24 0.23 0.24 0.24 0.65 0.61 0.24 0.6 0.24 0.25 0.25 0.24 0.22 0.24 0.24
Electrical properties
Specific contact resistance [Ωcm] > 1012 > 1010 > 1013 > 1015 > 1012 > 1011 < 103 < 109 > 1013 < 105 > 1013 > 1012 > 1013 > 1012 > 1012 > 1010 > 1010
Surface resistance [Ω] > 1012 > 1010 > 1011 > 1012 > 1012 > 1013 < 102 < 109 > 1012 < 105 > 1011 > 1011 > 1012 > 1012 > 1012 > 109 > 109
36 37
dry-tech® bearing technology | Lubrication-free made easy iglidur® | High performance polymers
Change now and save up to 40 % Properties and design
iglidur® plain bearings made of high
performance polymers
Extremely wear-resistant tribopolymers improved by General properties of
precisely harmonised additions of strengthening materials iglidur® plain bearings
and solid lubricants, tested a thousand times and proved a
million times – that is iglidur®. igus® engineers develop and test
●● Lubrication-free
more than 100 new plastic compounds every year. The finely
harmonised combination of plastic matrix, strengthening ●● Corrosion resistance
components and solid lubricants in every single tribopolymer
●● Good media resistance
results in an individual properties profile in each case. In
more than 10,000 individual tests a year on over 200 test ●● High compressive strength
stands in the igus® test laboratory, all existing and potential
●● High mechanical dampening
iglidur® materials, as well as other materials, are thoroughly
tested. The findings go into a unique knowledge database ●● Low coefficients of friction
on the tribology of maintenance free plastic plain bearings.
●● Maintenance-free
This database enables us to select the ideal iglidur® plain
dry-tech®: Enhance technology without Tested thousands of times Proven millions
bearing for our customers depending on the application ●● High resistance to contamination
lubrication – Reduce cost by using of times.
and to calculate its anticipated service life. If necessary, it
tribopolymers Applications with high cycle rates, speeds and accelerations ●● Lightweight
is also possible to develop an application-specific material,
igus dry-tech bearings offer an alternative to lubricated
® ®
in demanding environmental conditions require tested and
exactly adapted to the thermal, mechanical and tribological ●● High wear resistance
plain, linear and roller bearings. igus® develops tribopolymers reliable systems for all igus® products. igus® constantly
requirements, which goes beyond the existing iglidur®
for continuous dry-running operation. By avoiding lubrica conducts tests in its in-house laboratory under real-world ●● Excellent price-performance ratio
range. In addition, freely accessible online tools simply to
tion, dry-tech® bearing technology attains superior service conditions. Every year, more than 9,600 tests are conducted
use enable every user to select his personal sliding bearing
life: from –100 °C up to +250 °C at continuous exposure, on plain bearings and over 4,100 tests on e-chains® and
from iglidur ® product range. Whether iglidur ® product
from cleanrooms to extreme dirt, from vacuum to extreme cables. The findings go into a unique knowledge database
finder or iglidur® service life calculation, piston ring or bar
humidity. Reduce cost with igus® dry-tech® bearings. A on the tribology of maintenance-free plastic plain bearings.
stock configurator: with few clicks and applications related Over and above the general properties, each iglidur ®
direct product comparison shows that you can reduce your Our laboratory is also at your disposal. If we don’t have
information a suitable bearing is quickly found. bearing material possesses a series of special properties
current costs for bearing components by as much as 50 %. data for your type of application, we can conduct a test
www.igus.eu/online-tools and strengths, which make it specially suitable for
representative of your requirements.
certain applications and requirements. You can find a
comprehensive description of the materials in the respective
chapters before the dimensions tables.
Picture 02: Injection moulded iglidur® plain bearings Picture 03: Base polymers with fibres and solid lubri
are homogeneously structured. Base polymer, bonding cants, magnified 200 times, dyed
materials and solid lubricants mutually complement
Picture 01: igus® lab: 15,000 tribological tests (friction and wear) in 300 test set-ups in the industry's largest labora each other.
tory (2,750m2). View inside bearing laboratory in Cologne.
38 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 39
iglidur® | High performance polymers iglidur® | Technical data
Properties and design Load
120
The traditional solution The load of a plain bearing is expressed by the surface
Hard shells with soft coating. Every lubricated bearing The iglidur® solution: pressure (p) in MPa (corresponding to N/mm2). For this 100
works according to this principle, and also a number of the self-lubricating effect purpose, the radial load is determined on the projected 80
is easily removed. 20
●● Base polymer p = F
p = F
d1 · b1
(d2 2
– d12 ) · π 0
Base polymers and technical fibres ●● Fibres and filling material 4 20 50 80 120 150
The radial pressure with which the bearings are loaded ●● Solid lubricants Temperature [°C]
is received by the polymer material. In the contact area, iglidur® G iglidur® J260 iglidur® A290
In these equations: iglidur® M250 iglidur® L250 iglidur® T220
this material provides a support to the shaft. The polymer These components are not applied in layers, but instead iglidur® P iglidur® R iglidur® Q
F load in [N] iglidur® GLW iglidur® D iglidur® F
base material ensures that the lubricants do not receive are mixed together homogeneously. The advantage of iglidur® J iglidur® J200 iglidur® UW
d1 bearing inner diameter in [mm] iglidur® W300 iglidur® A180 iglidur® B
a surface pressure that is too high. The base material is this design is clear when the requirements on the bearings iglidur® J3 iglidur® A200 iglidur® C
b1 bearing length in [mm]
also reinforced by technical fibres or filling materials. These surface are studied:
d2 outer diameter of the bearing in [mm]
additional materials stabilise the bearing especially in cases
160
of continuous load. 1. The coefficient of friction, which is determined
140
especially by the surface of the bearing, should
120
Incorporated self-lubrication be as low as possible. Max. permissible surface pressure
Wear [µm/km]
●● Solid lubricants lubricate the bearing plain bearing to record these effects in advance, or deter-
independently and prevent friction of the system. mine the effective temperatures in the test.
1
Pressure and speed 5 10 20 45
With decreasing radial load on the plain bearing, the Load [MPa]
permissible surface speed increases. The product of iglidur® G iglidur® W300 iglidur® Q
Picture 04: Polymer granulate; basis compound of the iglidur® P iglidur® Z
the pressure [p] and speed [v] can be understood as a iglidur® J iglidur® V400
lubrication-free and predictable iglidur® bearings
measurement for the frictional heat of the bearing. This
relationship is shown by the pv diagram that is the first in Diagram 04: Wear of iglidur® plain bearings under
the respective chapter for each iglidur® material. medium and high pressures
40 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 41
iglidur® | Technical data iglidur® | Technical data
Pressure and wear Pressure and coefficient of friction
The load of the plain bearing has an effect on the wear of the each pressure, there is an optimal plain bearing available. With increasing load, the coefficient of friction of the plain and the surface finish are also significant.
bearing. The following diagrams show the wear behaviour of The wear is shown as a wear rate in [μm/km]. bearing typically decreases. In this context, shaft materials Coefficient of friction, page 47
the iglidur® bearing materials. It is easily recognised that for
iglidur® Q2
iglidur® Q
iglidur® Q290
0.1
iglidur® F
0.25 0.75 1 2 5
iglidur® F2
Load [MPa]
iglidur® H4
iglidur® UW
iglidur® N54
iglidur® G V0
iglidur® J2
Diagrams 05–07: Wear of iglidur® plain bearings under low pressures iglidur® AB
iglidur® RW370
iglidur® B
iglidur® C
42 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 43
iglidur® | Technical data
Surface Speed Material Rotating Oscillating Linear
Long-term Short-term Long-term Short-term Long-term Short-term
The peripheral speed is always significant in plain bearings. bearings for rotating, oscillating, and linear movements. iglidur® G 1.0 2.0 0.7 1.4 4.0 5.0
Crucial is not the absolute rotation speed, but the relative These surface speeds are limit values assuming minimum iglidur® M250 0.8 2.0 0.6 1.4 2.5 5.0
speed between the shaft and the bearing. The surface pressure loading of the bearing. In practice, these limit iglidur® P210 1.0 2.0 0.7 1.4 3.0 4.0
speed is expressed in meters per second [m/s] and calcula- values are rarely reached due to an inverse relationship iglidur® P 1.0 2.0 0.7 1.4 3.0 4.0
ted from the rotary speed n [rpm] with the following formula. between load and speed. All increases of the pressure iglidur® K 1.0 2.0 0.7 1.4 3.0 4.0
With varying speed like seen for example with oscillating leads unavoidably to a reduction of the allowable surface iglidur® GLW 0.8 1.0 0.6 0.7 2.5 3.0
movements, the value needed is the average speed (see speeds and vice versa. iglidur® J 1.5 3.0 1.1 2.1 8.0 10.0
above formula). The speed limit is determined by the thermal properties of iglidur® W300 1.0 2.5 0.7 1.8 4.0 6.0
the bearing. This is also the reason why different surface iglidur® J3 1.5 3.0 1.1 2.1 8.0 10.0
iglidur® J350 1.3 3.0 1.0 2.3 4.0 8.0
speeds can occur for the different movement types. For
iglidur® J260 1.0 2.0 0.7 1.4 3.0 4.0
linear movements, more heat can be dissipated via the
iglidur® W360 1.2 2.7 0.9 2.0 3.0 5.0
Rotational motion: v =
60 · 1,000 s [ ]
n · d1 · π m shaft, since the bearing uses a longer surface area on the
shaft.
iglidur® L250
iglidur® L350
1.0
3.0
1.5
4.0
0.7
1.5
1.1
3.0
2.0
4.0
3.0
6.0
[ ]
iglidur® L500 3.0 4.0 1.5 3.0 5.0 8.0
Oscillating motion: v = d1 · π · 2 · ß · f m Surface speed and wear
360 1,000 s iglidur® R 0.8 1.2 0.6 1.0 3.5 5.0
Considerations regarding the permissible surface speeds iglidur® D 1.5 3.0 1.1 2.1 8.0 10.0
In these equations: should also include the wear resistance of the plain bearing. iglidur® J200 1.0 1.5 0.7 1.1 10.0 15.0
d1 = shaft diameter [mm] ß High surface speeds automatically bring correspondingly iglidur® X 1.5 3.5 1.1 2.5 5.0 10.0
f = frequency in Hertz high wear rates with them. With higher sliding speed, not iglidur® Z 1.5 3.5 1.1 2.5 5.0 6.0
ß = angle of motion per cycle [°] only the wear rate rises but also the absolute wear. iglidur® X6 1.5 3.5 1.1 2.5 5.4 10.0
n = rpm iglidur® V400 0.9 1.3 0.6 0.9 2.0 3.0
Surface speed and coefficient of friction iglidur® UW500 0.8 1.5 0.6 1.1 2.0 3.0
In practice the coefficient of friction of plain bearings is iglidur® H1 2.0 2.5 1.0 1.5 5.0 7.0
Permissible surface speeds a result of the surface speed. High surface speeds have iglidur® H370 1.2 1.5 0.8 1.1 4.0 5.0
iglidur® plain bearings were primarily developed for low a higher coefficient of friction than low surface speeds. iglidur® H 1.0 1.5 0.7 1.1 3.0 4.0
iglidur® C500 0.9 1.1 0.7 1.0 2.4 2.8
to average surface speeds in continuous operation. Table Diagram 08 shows this relationship by using the example
iglidur® H2 0.9 1.0 0.6 0.7 2.5 3.0
01 shows the permissible surface speed of iglidur® plain of a cold rolled steel shaft (Cf53) with a load of 0.7 MPa.
iglidur® A181 0.8 1.2 0.6 1.0 3.5 5.0
iglidur® A350 1.0 1.2 0.8 0.9 2.5 3.0
iglidur® A500 0.6 1.0 0.4 0.7 1.0 2.0
iglidur® A180 0.8 1.2 0.6 1.0 3.5 5.0
iglidur® A200 0.8 1.5 0.6 1.1 2.0 3.0
iglidur® A160 0.5 0.7 0.4 0.6 2.0 3.0
iglidur® A290 1.0 2.0 0.7 1.4 3.0 4.0
iglidur® UW160 0.3 0.5 0.3 0.4 1.0 2.5
iglidur® T220 0.4 1.0 0.3 0.7 1.0 2.0
iglidur® Q2 1.0 2.0 0.7 1.4 4.0 5.0
iglidur® Q 1.0 2.0 0.7 1.4 5.0 6.0
iglidur® Q290 0.8 2.0 0.6 1.4 1.0 2.0
iglidur® TX1 0.4 0.9 0.2 0.5 1.0 2.0
iglidur® F 0.8 1.5 0.6 1.1 3.0 5.0
iglidur® F2 0.8 1.4 0.7 1.1 3.0 5.0
iglidur® H4 1.0 1.5 0.7 1.1 1.0 2.0
iglidur® UW 0.5 1.5 0.4 1.1 2.0 3.0
iglidur® N54 0.8 1.5 0.6 1.1 1.0 2.0
iglidur® G V0 1.0 2.0 0.7 1.4 4.0 5.0
iglidur® J2 0.8 1.9 0.7 1.1 3.0 5.0
iglidur® AB 0.7 1.0 0.5 0.7 1.0 1.8
iglidur® B 0.7 1.0 0.5 0.7 2.0 3.0
iglidur® C 1.0 1.5 0.7 1.1 2.0 3.0
Table 01: Surface speeds of iglidur® bearings in m/s; long and short-term
44 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 45
iglidur® | Technical data
pv value and coefficients of friction
For plain bearings, the product is given a new value depen Lubrication Lubrication Correction factor Depending on whether an application is starting from a
ding on the pressure [p] and the surface speed [v]. The pv Although iglidur® plain bearings are designed to run dry, Dry-running 1.0 stationary position or the movement is in progress and
value can be considered a measure of the frictional heat they are quite compatible with standard oils and greases. A During installation 1.3 needs to be maintained, a choice is made between static
and can be used as an analytical tool to answer questions single lubrication during the installation improves the start-up Continuous, grease 2.0 friction coefficient and the dynamic friction coefficient.
concerning the proper application of a plain bearing. For this behaviour and the coefficient of friction, thus reducing Continuous, water 4.0
purpose the actual pv value is compared with a permitted the frictional heat. Due to this effect, the permissible loads Continuous, oil 5.0 Coefficients of friction and surfaces
pv value calculable for the height. The permitted pv value for plain bearings can be increased by lubrication. Table 02 At study here is the relationship between coefficients of
Table 02: Correction of the tolerated pv value by
depends on the shaft material, the ambient temperature shows the correction factors for pv value using lubrication. friction and surface roughness of shaft materials. It is clearly
means of lubrication
and the service time. shown that the amount of friction is composed of different
Material Thermal conductivity [W/m · k] factors.
8
Correction factor Steel 46 If the shaft is too rough, abrasion levels play an important
7
The permissible pv value can be increased in practical Aluminium 204 role. Small areas of unevenness that can interlock
6
operation if the bearing temperature never reaches the Grey cast iron 58 with each other must be worn off the surface.
5
maximum limit because of the short operating time. Tests 304 stainless steel 16 When the surfaces are too smooth, however, higher adhesion
4
Correction factor
have shown that this is true for operating times below 10 Ceramics 1.4 results, i. e. the surfaces stick to each other. Higher forces are
3
minutes. It is known that a longer dwell time makes a greater Plastics 0.24 necessary to overcome the adhesion, which results from an
2
contribution to re-cooling. An important qualifier here is the increased coefficient of friction.
1 Table 03: Heat conductivity values of shaft or housing
ratio of the operating time and dwell times. The different Stick-slip can be the result of a large difference between
0 materials
curves of diagram 09 represent different ratios (3 x means that 0 1 2 3 4 5 6 7 8 9 static and dynamic friction and of a higher adhesive tendency
the dwell time is three times longer than the operating time). Operating time [min] of mating surfaces. Stick-slip also occurs due to intermittent
4 times 3 times 2 times 1time Coefficients of friction running behaviour and can result in loud squeaking. Over
Diagram 09: Correction factor for p · v iglidur® plain bearings are self-lubricating by the addition of and over again, it is observed that these noises do not occur
solid lubricants. The solid lubricants lower the coefficient or can be eliminated with rough shafts. Thus for applications
of friction of the plain bearings and thus increase the wear that have a great potential for stick-slip – slow movements,
resistance. The coefficient of friction μ is proportional to the large resonance of the housing – attention must be paid to
normal force and describes which force is needed to move the optimal roughness of the shafts.
a body in relation to another.
pv
perm.
= ( )
[K1 · π · k · ∆T ] [K2 · π · s · ∆T ]
µ · s
+
µ · b1 · 2
· 10–3
In these equations:
K1, K2 = constant for heat dissipation (K1 = 0.5, K2 = 0.042)
s = bearing wall thickness mm
b1 = bearing length mm
μ = coefficient of friction
s = thermal conductivity of the shaft
k = thermal conductivity of the bearing
∆T = (Ta – Tu)
Tu = ambient temperature [°C]
Ta = max. Application Temperature [°C]
Picture 05: Better products for less – a key element is the industry's largest test lab. 2,750 m2 lab, more than
15,000 tests and 2 billion test strokes per year.
46 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 47
iglidur® | Technical data –100 –50 0 +50 +100 +150 +200 +250 +300 Material Temperature [°C]
iglidur G
®
iglidur G
®
+80
Temperatures iglidur® M250 iglidur® M250 +60
iglidur® P210 iglidur® P210 +50
The temperature resistance of high performance polymer addition to the press-fit. The table 04 shows the temperature
iglidur® P iglidur P
®
+90
plain bearings is usually underestimated. Data is often found at which additional securing of the iglidur® plain bearing is
iglidur® K iglidur® K +70
in the literature about the continuous use temperature. The required, even under low axial loads. The greater the forces, iglidur® GLW iglidur GLW
®
+80
continuous use temperature is the highest temperature, the more reasons to engage such a fastening. iglidur® J iglidur® J +60
which the plastic can withstand for a period of time without a iglidur® W300 iglidur W300
®
+90
reduction in the tensile strength of the material above or below Temperature and load iglidur® J3 iglidur® J3 +60
a prespecified value. This standardised test however yields The diagrams 02 and 03 ( Page 41) show the maximum iglidur® J350 iglidur J350
®
+140
only a less relevant characteristic value, as bearings are almost permissible surface pressure [p] of the iglidur® plain bea- iglidur® J260 iglidur® J260 +80
always subjected to a load. The application temperatures of rings as a function of temperature. With increasing tempe- iglidur® W360 iglidur® W360 +90
the materials are more revealing. rature, this value decreases continuously. With plain bea- iglidur® L250 iglidur L250
®
+55
iglidur® L350 iglidur® L350 +140
rings it is important to note that, due to the friction, the
iglidur® L500 iglidur® L500 +135
Application temperatures bearing temperature may be higher than the ambient tem-
iglidur® R iglidur® R +50
The minimum application temperature is the temperature perature.
iglidur® D iglidur D
®
+50
below which the material is so rigid and hard that it iglidur® J200 iglidur® J200 +60
becomes too brittle for standard applications. The maximum Coefficient of thermal expansion iglidur® X iglidur® X +135
continuous application temperature is the temperature The thermal expansion of polymers is approximately 10 iglidur® Z iglidur® Z +145
which the material can endure without the properties to 20 times higher than metals. In contrast to metal, this iglidur® X6 iglidur® X6 +165
changing considerably. expansion is non linear in plastics. The coefficient of thermal iglidur® V400 iglidur V400
®
+100
The maximum, short-term application temperature is the expansion of the iglidur® plain bearing is a significant reason iglidur® HSD350 iglidur® HSD350 +130
temperature above which the material becomes so soft, that for the required play in the bearing. At the given application iglidur® UW500 iglidur® UW500 +150
iglidur® H1 iglidur® H1 +80
it can only withstand small external loads. "Short-term" is clearance, seizing of the bearing to the shaft does not
iglidur® H370 iglidur® H370 +100
defined as a period of a few minutes. occur at high temperatures. The coefficient of thermal
iglidur® H iglidur® H +120
If the plain bearings are moved axially or axial forces occur, expansion of iglidur® plain bearings was examined for
iglidur® C500 iglidur® C500 +130
there is more opportunity for the bearing to lose press-fit. significant temperature ranges and the results are given in iglidur® H2 iglidur H2
®
+110
In these cases, axial securing of the bearing is necessary in the individual materials tables, at the start of each chapter. iglidur® A181 iglidur® A181 +60
iglidur® A350 iglidur A350
®
+140
iglidur® A500 iglidur® A500 +130
iglidur® A180 iglidur® A180 +60
iglidur® A200 iglidur A200
®
+50
iglidur® A160 iglidur® A160 +60
iglidur® A290 iglidur A290
®
+110
iglidur® UW160 iglidur® UW160 +70
iglidur® T220 iglidur T220
®
+50
iglidur® Q2 iglidur® Q2 +70
iglidur® Q iglidur® Q +50
iglidur® Q290 iglidur Q290
®
+80
iglidur® TX1 iglidur® TX1 +100
iglidur® F iglidur® F +105
iglidur® F2 iglidur® F2 +70
iglidur® H4 iglidur H4
®
+110
iglidur® UW iglidur® UW +80
iglidur® N54 iglidur® N54 +60
iglidur® G V0 iglidur G V0
®
+100
iglidur® J2 iglidur® J2 +60
iglidur® AB iglidur AB
®
+50
iglidur® RW370 iglidur® RW370 +120
iglidur® B iglidur® B +50
iglidur® C iglidur® C +40
Picture 06: Material tests are possible up to +250 °C Diagram 10: Comparison of the continuous and short-term upper Table 04: Temperature at which
application temperature limits [°C] additional securing of the iglidur®
plain bearing is required
48 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 49
iglidur® | Technical data
Wear resistance
The wear of components depends on many different Wear and temperature
factors, therefore it is difficult to make general statements Within wide temperature ranges, the wear resistance of the
about the wear behaviour. In many experiments and tests, iglidur® plain bearings shows little change. In the maximum
the measurement of the wear is a primary factor In testing, temperature range, however, the temperature increases and
it has become clear what variances are possible between the wear of the plain bearing increases. One particular exception
different material pairings. For given loads and surface is represented by iglidur® X. The wear resistance of iglidur® X
speeds, the wear resistance can easily vary by a factor of increases greatly as temperature increases and reaches
10 between materials pairings that run well together. the optimum wear resistance at a temperature of +160 °C.
Then resistance decreases again, gradually.
Shaft materials, page 52
Wear during abrasive dirt accumulation
Wear and pressure Special wear problems frequently occur if abrasive dirt
Different loads greatly influence the bearing wear. Among particles get into the bearing. iglidur® plain bearings can
the iglidur® plain bearings, certain materials are optimised clearly improve the operating time of machines and systems
for low loads, while others are suitable for use with high or in these situations. The high wear resistance of the materials
extremely high loads. and the self lubrication process result in the highest service
life time. As no oil or grease is on the bearing, dirt particles
can not penetrate as easily into the bearing. Most debris
100
simply falls away from the bearing thus limiting potential
damage. If however, a hard particle penetrates into the
10
bearing area, then an iglidur® plain bearing can absorb this
particle. The foreign body becomes embedded in the wall
Wear [µm/km]
50 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 51
iglidur® | Technical data
Wear and shaft materials
The shaft is, next to the plain bearing itself, the most important The small wear results of the systems with hard-chromed 15 15
parameter in a bearing system. It is in direct contact with shafts are especially impressive. This very hard, but also
12 12
the bearing, and like the bearing, it is affected by relative smooth shaft gives excellent results on the wear behaviour
motion. Fundamentally, the shaft is also worn, however, in many bearing pairs. The wear of many iglidur® plain bea- 9 9
modern bearing systems are designed in a way that the rings is lower on this shaft than on any other shaft material
wear of the shafts is so small that it can not be detected with tested. However, it should be pointed out that because of 6 6
Wear [µm/km]
Wear [µm/km]
traditional methods of measurement technology. Shafts can the typically small surface roughness, the danger of stick
3 3
W300
W300
M250
M250
A180
A180
J350
J350
be distinguished and classified according to their hardness slip on hard chromed shafts is especially high.
J3
J3
H1
H1
X6
X6
P
P
X
X
J
J
G
G
Z
Z
and according to the surface roughness. With high-grade stainless steel 1.4112, a similarly good 0 0
result is obtained. Case-hardened steel shafts (material Diagram 13: Wear with Cf53 shaft, Diagram 17: Wear with hard chromed aluminium
Coefficient of friction, page 47 key 1.1213) give very good results, too. With other shaft p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm shaft, p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm
Wear resistance, page 50 materials, the wear results vary considerably. For example,
in tests with 304 stainless steel shafts at low load, good 15 15
The hardness of the shaft likewise plays an important role. to very good results can be found with the right bearing
12 12
When the shafts are less hard, the shaft is worn smooth material. It must be said on the other side, that no other
during the break-in phase. Abrasive points are worn off and shaft material shows a bigger variation of wear results with 9 9
the surface is rebuilt. For some materials, this effect has different bearing materials. Therefore, the choice of the most
positive influences, and the wear resistance of the polymer suitable bearing material is particularly important with the 6 6
Wear [µm/km]
Wear [µm/km]
bearing increases. In the following diagrams, the most com- shaft materials 304 stainless steel and HR carbon steel.
3 3
W300
W300
M250
M250
A180
A180
J350
J350
mon shaft materials are listed and the iglidur® materials that The test results give only a sample of the existing data. All
J3
J3
H1
H1
X6
X6
P
P
X
X
J
J
G
G
Z
Z
are best suited are compared. For easier comparison, the of the results shown were made with same loads and 0 0
scaling of the wear axis is the same in all diagrams. speeds. Diagram 14: Wear with 304 stainless steel shaft, Diagram 18: Wear with a machine steel shaft,
p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm
15 15
12 12
9 9
6 6
Wear [µm/km]
Wear [µm/km]
3 3
W300
W300
M250
M250
A180
A180
J350
J350
J3
J3
H1
H1
X6
X6
P
P
X
X
J
J
G
G
Z
Z
0 0
Diagram 15: Wear with HR carbon steel shaft, Diagram 19: Wear with high grade steel shaft,
p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm
15
12
6
Wear [µm/km]
W300
M250
A180
J350
J3
H1
X6
P
X
J
G
Z
0
Picture 10: Oscillating wear test rig for testing the Picture 11: Oscillating wear test rig for testing the Diagram 16: Wear with hard chromed shaft,
wear in oscillating movements at low loads wear in oscillating movements at medium loads p = 1 MPa, v = 0.30 m/s Ra = 0.20 μm
52 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 53
iglidur® | Technical data iglidur® | Technical data
Chemical resistance Material Hydro- Greases, Weak Weak UV resistance
carbons oils without acids alkaline
iglidur® plain bearings can come into contact with many additives Radioactive radiation absorption of moisture. In experiments, it should be tested
chemicals during their use. This contact can lead to iglidur® G + + 0 to – + A comparison of the resistance to radioactive radiation is whether the required properties are also stable when the
changes of the structural properties. The behaviour of iglidur® M250 + + 0 to – + shown in table 07. By a wide margin iglidur® X, UW500, conditions are changing.
plastics towards a certain chemical is dependent on the iglidur P210
®
– – 0 – and Z are the most resistant materials.
temperature, the length of exposure, and the type and iglidur® P – + 0 – Material Radiation
amount of the mechanical loading. If iglidur® plain bearings iglidur® K + + 0 to – + UV resistance resistance
are resistant to a chemical, they can be used in these iglidur® GLW + + 0 to – + Plain bearings can be exposed to constant weathering when X, Z, UW500, A160 1 · 105 Gy
iglidur® J + + 0 to – +
media. Sometimes, the surrounding media can even take they are used outside. The UV-resistance is an important X6, A500 2 · 105 Gy
iglidur W300
®
+ + 0 to – +
on the role of a lubricant. Therefore plain bearings may measure that states whether a material is affected by UV M250, J3, A200, N54 1 · 104 Gy
iglidur® J3 + + 0 to – +
also be used lubricated. However, in dirty environments, a radiation. The effects can extend from slight changes in L250 3 · 104 Gy
iglidur® J350 + to 0 + + +
traditional lubricant can decrease the wear resistance when iglidur® J260 + 0 to – – + to 0 colour to brittleness of the material A comparison of the V400, C 2 · 104 Gy
compared to running dry. The following overview should iglidur® W360 + + 0 to – + materials to each other is shown in the table 08. The results P, K 5 · 102 Gy
quickly assist you. You’ll find a detailed list of chemical iglidur® L250 + + 0 to – + show that iglidur® plain bearings are suitable for outside use. G, J, W300, P210, J260, J200, R, D, C500, 3 · 102 Gy
resistances in the rear of the catalogue. iglidur® L350 + to 0 + + + Only for a few iglidur® materials are any changes expected. A180, A290, UW160, T220, F, F2, Q, Q2,
iglidur® L500 + + + +
UW, G V0, J2, B, GLW, L500, Q290, AB
Chemical table, page 1478 iglidur R
®
+ + 0 to – + Vacuum J350, H, H1, H370, H2, H4, A181, 2 · 102 Gy
iglidur® D + + 0 to – + iglidur® plain bearings can be used in a vacuum to a limited A350, W360, TX1
iglidur® J200 + + 0 to – +
extent. Only a small amount of outgassing takes place.
iglidur X
®
+ + + + Table 06: Comparison of the radiation resistance of
Applications in the food industry In most iglidur® plain bearings, the outgassing does not
iglidur® Z + + + + iglidur® plain bearings
The iglidur® programme with specially developed bearing iglidur X6
®
+ + + + change the material properties. Generally, materials with
materials is prepared for the special requirements in iglidur® V400 + + + + low moisture absorption are recommended.
machines and equipment for the food industry. The Material Surface resistance [Ω]
iglidur® HSD350 + + + +
materials of the iglidur® A serie (except of iglidur® A290) and iglidur UW500
®
+ + + + Electrical properties iglidur X ®
< 103
of the iglidur® T220 are made according to the requirements iglidur® H1 + + + to 0 + In the product range of the maintenance-free, self lubricating iglidur® X6 < 105
of the American Food and Drugs Administration (FDA) for iglidur H370
®
+ + + to 0 + iglidur® plain bearings, there are both insulating as well as iglidur® UW500 < 109
the repeated contact with food. iglidur® A290 material is iglidur® H + + + to 0 + electrically conductive materials. The electrical properties iglidur® H < 102
iglidur® C500 + + + + iglidur® H370 < 105
made according to the requirements of the German federal are given in detail in the individual material descriptions.
iglidur H2
®
+ + + to 0 + iglidur® F < 102
agency BfR (Federal Institute for Risk Assessment). Table 07: Electrical properties of conductive iglidur® plain
iglidur® A181 + + 0 to – + iglidur® F2 < 109
bearings. The iglidur® plain bearings not mentioned here
iglidur A350
®
+ to 0 + + +
are usually electrically insulating. Please observe that for iglidur® UW < 105
iglidur® A500 + + + +
iglidur® A180 + + 0 to – + some materials the properties can be changed by the Table 07: Electrical properties of conductive iglidur®
iglidur A200
®
+ + 0 to – + plain bearings
iglidur® A160 + + + +
iglidur A290
®
+ + 0 to – +
iglidur® UW160 + + + +
iglidur® T220 – + 0 –
Material UV Material UV Material UV Material UV
iglidur Q2
®
+ + 0 to – +
resistance resistance resistance resistance
iglidur® Q + + 0 to – +
iglidur® G 5 iglidur® L350 5 iglidur® H 2 iglidur® Q 2
iglidur Q290
®
+ + 0 to – +
iglidur® M250 4 iglidur® L500 5 iglidur® C500 4 iglidur® Q290 4
iglidur® TX1 + + + +
iglidur P210
®
3 iglidur R
®
4 iglidur H2
®
1 iglidur F
®
5
iglidur® F + + 0 to – +
iglidur® P 5 iglidur® D 4 iglidur® A181 3 iglidur® F2 3
iglidur F2
®
– + 0 – iglidur® K 4 iglidur® J200 4 iglidur® A350 4 iglidur® H4 1
iglidur® H4 + + + to 0 + iglidur® GLW 5 iglidur® X 5 iglidur® A500 3 iglidur® UW 3
iglidur® UW + + 0 to – + iglidur® J 3 iglidur® Z 3 iglidur® A180 3 iglidur® N54 4
iglidur® N54 + + 0 to – + iglidur W300
®
3 iglidur X6
®
5 iglidur A200
®
4 iglidur G V0
®
3
Table 05 (right): iglidur® G V0 + + 0 to – + iglidur® J3 3 iglidur® V400 3 iglidur® A160 4 iglidur® J2 2
Chemical resistance of iglidur® materials iglidur J2
®
+ + 0 to – + iglidur® J350 2 iglidur® HSD350 3 iglidur® A290 4 iglidur® AB 2
+ resistant iglidur® AB + + 0 to – + iglidur® J260 1 iglidur® UW500 5 iglidur® UW160 4 iglidur® RW370 3
0 conditionally resistant iglidur RW370
®
– + + + iglidur® W360 3 iglidur® H1 2 iglidur® T220 2 iglidur® B 1
All data given at room temperature [+20 °C] iglidur® C + + 0 to – + Table 08: UV resistance of iglidur® plain bearings, 1 low resistance, 5 highest resistance
54 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 55
iglidur® | Technical data iglidur® | Technical data
Assembly instructions Tolerances and measurement system
iglidur® bearings are press-fit bearings. The inner diameter The installation dimensions and tolerances of the iglidur®
adjusts only after press-fit in the proper housing bore with a plain bearings are a function of the material and wall thick-
recommended (H7) tolerance. The before press-fit oversized nesses. For each material, the moisture absorption and
dimension can be up to 2 % of the inner diameter. In this the thermal expansion are imperative. Plain bearings with
manner, the secure press-fitting of the bearing is achieved. low moisture absorption can be designed with a minimal
Axial or radial shifts in the housing are also prevented. amount of tolerance. For wall thickness, the rule is: The
The bore in the housing should be finished in the recom thicker the bearings are, the larger the tolerances must
mended tolerance (usually H7) for all bearings and be as be. Thus, different tolerance classes exist for iglidur® plain
smooth, flat, and chamfered as possible. The bearing bearings. Within these tolerances, iglidur® plain bearings
should be press-fitted using a flat press. The use of centring can operate in the permissible temperature range and in
or calibrating pins can cause damage to the bearing and humidity conditions up to 70 % according to the installati-
create a larger amount of clearance. on recommendations. Should higher air moisture levels be
present, or the bearing is used under water, we provide
Adhesion advice with regard to applications, in order to help you use
Using an adhesive to fit an iglidur® bearing is not usually Picture 12: The bearing should be press-fitted using your bearings correctly. Picture 13: Measurement of the inner diameter of a
necessary. If the press-fit of the bearing could be lost a flat press press-fit plain bearings
because of high temperatures, the use of a plain bearing Testing methods
having a higher temperature resistance is recommended. iglidur® bearings are press-fit bearings for housings with an
If however, the securing of the bearing by adhesives is Press-fitting plain bearings H7 standard bore. This press-fitting of the bearing fixes the
1
planned, individual tests are necessary in each case. The made easy bearing in the housing, and the inner diameter of the plain
transfer of successful results to other application cases is bearing is also formed upon press-fit.
iglidur® plain bearings are press-fit bearings, which are
not possible. The bearing test is performed when the bearing is installed
dimensionally oversized and pressed into a housing with
in a bore with the minimum specified dimension; both using 2
H7 tolerance. This is not always done in an assembly line
a 3 point probe and a Go-No-Go gauge.
using suitable tools. The igus® assembly aid flexibly
Machining ●● The "Go-Side" of the Go-No-Go gauge, pressed into
and reliably accepts plain bearings for shaft diameters
iglidur ® plain bearings are delivered ready to fit. The the bore, must pass easily through the bearing
from 13–50 mm (PT-1350) and 6–20 mm (PT-0620)
extensive product line makes it possible to use a standard ●● With the 3 point probe, the inner diameter of the
and even permits assembly using a hammer – simple 3
dimension in most cases. If for some reason, a subsequent bearing must lie within the prescribed tolerance on the
and fast.
machining of the plain bearing is necessary, the adjacent measurement plane (diagram 20)
table shows the machining standard values. The subsequent
Ø
machining of the running surfaces is to be avoided if Troubleshooting
possible. Higher wear rate is most often the result. In spite of careful manufacturing and assembly of the Diagram 20: Positions of the measurement lines
An exception is the iglidur® M250 which is very suitable bearings, differences and questions regarding the recom
for secondary machining. In other iglidur® plain bearings, mended installation dimensions and tolerances can result.
disadvantages of a sliding surface machining can be For this reason, we have compiled a list of the most frequent
PT-1350 PT-0620
counteracted by lubrication during installation. reasons for differences. In many cases, with this trouble
shooter, the reasons for the differences can be found quickly.
●● The bore is not chamfered correctly, so the bearing
Process Turning Drilling Milling material is removed upon press-fitting
Tool material SS SS SS ●● A centring pin was used which expanded the inside
Feed [mm] 0.1…0.5 0.1…0.5 to 0.5 diameter of the bearing during press-fit
Clearance angle 5…15 10…12 3 ●● The bore does not meet the recommended housing 20– 30°
Rake angle 0…10 3…5 bore specifications (usually H7)
Cutting speed [m/min] 200…500 50…100 to 1,000 ●● The housing is made out of a soft material that was
Table 09: Guidelines for machining expanded by the bearing installation
●● The shaft is not within recommended tolerances
●● The measuring doesn't take place within the
measuring lines Diagram 21: Press-fit of the bearing (section view)
56 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 57
iglidur® | Calculation iglidur® | Calculation
Tolerances igus® formula
Installation tolerances Short cuts and formulas for polymer plain bearings
iglidur® plain bearings are standard bearings for shafts with housing, in standard cases the inner diameter automatically Surface pressure F = load [N]
h-tolerance (recommended minimum h9). The bearings adjusts to the correct tolerances. For particular dimensions FR = coefficient of friction [N]
Radial bearing: axial bearing:
are designed for pressfit into a housing machined to a the tolerance differs depending on the wall thickness. d1 = inner diameter of the bearing [mm]
p = F p = F
H7 tolerance. After being assembled into a nominal size b1 = bearing length [mm]
d1 · b1
(d2 2
– d12 ) · π
4 d2 = outer diameter of the bearing [mm]
p = surface pressure [N/mm2]
ISO tolerances for iglidur® bearings [mm]
Surface speed v = surface speed [m/s]
Diameter Housing Shaft Tolerances according to ISO 3547-1
Rotational motion: n = revolutions per minute
d1 H7 h9 E10 F10 D11
[ ]
ß = angle of motion per cycle [°]
up to 3 0 +0.010 0–0.025 +0.014 +0.054 +0.006 +0.046 +0.020 +0.080 v = n · d1 · π m
60 · 1.000 s f = frequency in Hertz
> 3 to 6 0 +0.012 0–0.030 +0.020 +0.068 +0.010 +0.058 +0.030 +0.105
K1, K2 = constant for heat dissipation
> 6 to 10 0 +0.015 0–0.036 +0.025 +0.083 +0.013 +0.071 +0.040 +0.130
Oscillating motion: (K1 = 0.5 K2 = 0.042) [N]
> 10 to 18 0 +0.018 0–0.043 +0.032 +0.102 +0.016 +0.086 +0.050 +0.160
[ ]
s = bearing wall thickness [mm]
> 18 to 30 0 +0.021 0–0.052 +0.040 +0.124 +0.020 +0.104 +0.065 +0.195 v = d1 · π · 2 · ß · f m
360 1.000 s μ = coefficient of friction
> 30 to 50 0 +0.025 0–0.062 +0.050 +0.150 +0.025 +0.125 +0.080 +0.240
λs = thermal conductivity of the shaft
> 50 to 80 0 +0.030 0–0.074 +0.060 +0.180 +0.030 +0.150 +0.100 +0.290
λk = thermal conductivity of the bearing
> 80 to 120 0 +0.035 0–0.087 +0.072 +0.212 +0.036 +0.176 +0.120 +0.340 pv value ΔT = (Ta - Tu )
> 120 to 180 0 +0.040 0–0.100 +0.085 +0.245 +0.043 +0.203 +0.145 +0.395
pv
perm.
= ( )
[K1 · π · k · ∆T ] [K2 · π · s · ∆T ]
µ · s
+
µ · b1 · 2
· 10–3 Tu
Ta
=
=
ambient temperature
max. application temperature
[°C]
[°C]
Material E10 F10 D11 Material E10 F10 D11
iglidur® G iglidur® C500 coefficient of friction
iglidur® M250 iglidur® H2
iglidur® P210 iglidur® A181 FR = µ · F
iglidur® P iglidur® A350
iglidur® K iglidur® A500
iglidur® GLW iglidur® A180 Quicklinks
iglidur® J iglidur® A200
iglidur® W300 iglidur® A160
iglidur® J3 iglidur® A290
iglidur® J350 iglidur® UW160
iglidur® J260 iglidur® T220
iglidur® W360 iglidur® Q2
iglidur® L250 iglidur® Q
iglidur® L350 iglidur® Q290
iglidur® L500 iglidur® TX1
iglidur® R iglidur® F
iglidur® D iglidur® F2
iglidur® J200 iglidur® H4
iglidur® X iglidur® UW
iglidur® Z iglidur® N54
iglidur® X6 iglidur® G V0
iglidur® V400 iglidur® J2
iglidur® HSD350 iglidur® AB
iglidur® UW500 iglidur® RW370 Quicklinks for more information and additional features. Visit directly your chosen product online, e.g.
iglidur® H1 iglidur® B www.igus.eu/G and you'll find more details, 3D-CAD files, DXF-files, PDF-downloads, application examples
iglidur® H370 iglidur® C and many more for your chosen igus® product.
iglidur® H
Table 10: Tolerances of iglidur® materials
58 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 59
iglidur standards:
®
60
iglidur® standards | Materials overview
iglidur® for all kind of applications – from stock
G M250 P210 P K
All-rounder The classic The robust Specialist for The low-priced Versatile and
all-rounder all-rounder pivoting, rolling outdoor all-rounder cost-effective
From page 144
according to applications and
DIN 2795 more
From page 79 From page 95 From page 105 From page 113
X Z X6 V400 HSD350
High
temperatures The specialist Extremely long The high For soft shafts and All-rounder for
for chemicals service life temperature high temperatures steam sterilisation
up to +250 °C
and temperatures under extreme specialist up
From page 242 conditions to +250 °C
From page 245 From page 255
H1 H370 H C500
High media Endurance runner Extremely long The classic with a High temperature
resistance with high media service life under high level of media endurance runner
From page 278 resistance water and temperature-
resistance
From page 297 From page 305
Contact with The universal The endurance The media and The "Food- The "food- "Food" bearing The Robust Suitable for
bearing for food runner at higher temperature all-rounder" classic" for with high media contact with
food contact temperatures in specialist in the low speeds resistance up to drinking water
From page 320 the food sector food sector 90 °C
Q2 Q Q290 TX1
Applications
with high The durable heavy The peak of Heavy-duty on The high load bearing
duty bearing stability soft shafts up to 200 MPa
loads static and 140 MPa
From page 396 dynamic
From page 415
F F2 H4 UW N54 G V0 J2 AB RW370
Special
application Electrically ESD compatible The automotive For fast rotation The Low-cost Versatile and The first According to
conductive all-rounder standard under water biopolymer all-rounder cost-effective antibacterial DIN EN 45545**
areas for fire protection iglidur® bearing
From page 424
62
iglidur®
iglidur standards | Advantages
®
iglidur standards | Advantages
® standard
product
range
16 iglidur® standards with more than 3,000 articles from stock
Coefficient of friction
Temperature [°C] 123)
Surface pressure
Price index
[MPa] 124)
[µ] 125)
iglidur® J3 – The new endurance runner: specialist for
16 iglidur standards, 1,321 new articles: the
®
●● Lubrication and maintenance-free pulsating loads
iglidur® standard product range now features ●● Service life can be calculated online Up to 10 MPa up to three times more wear resistant than 45 0.13
standardisation for 16 main materials with the ●● No minimum order value iglidur® J Page 165
90 0.05
work has never been easier; for (virtually) any Up to 150 MPa static
application from high-temperature to salt water, Page 245
0.33
Coefficient of friction
Temperature [°C] 123)
from foodstuffs to automotive.
Surface pressure
Price index
conditions
[MPa] 124)
0.18
Resistant to wear and impact even at high loads and
[µ] 125)
1.00
temperatures Page 255
iglidur® H1 – Endurance runner with high media
iglidur® G – The classic all-rounder 200
80 0.23 resistance 80
Excellent price-performance ratio 130 Excellent coefficients of friction and wear 0.17
Page 79 0.2 0.29
Page 297
iglidur® M250 – The robust all-rounder according to 0.55 iglidur® H370 – Extremely long service life 200
3.5
DIN ISO 2795 under water 80
Excellent vibration dampening High media resistance 0.17 1.20
80 28
Page 95 Page 305
iglidur® P210 – Specialist for pivoting, rolling
iglidur® A181 – The universal bearing for food contact
applications and more
FDA- and EC10/2011 compliant 0.18
Good coefficients of friction and wear on almost every shaft 100
50 0.17
0.48
0.38 Page 339 90 32
Page 105
iglidur® A350 – The endurance runner at higher
iglidur® P – The cost-effective outdoor all-rounder 180
0.24 temperatures in the food sector
No moisture absorption even with high ambient humidity 130 50 1.8 FDA- and EC10/2011 compliant, extremely wear-resistant 60 0.17 1.79
Page 113
Page 347
iglidur® J – The versatile endurance runner iglidur® A500 – The media and temperature specialist 250 120
0.36
High wear resistance on (almost) all shafts, very low in the food sector
coefficients of friction 0.16 FDA- and EU10/2011 compliant; extremely wear-resistant
90 35 0.29 0.20
Page 141 for high temperatures Page 355
iglidur® W300 – The classic endurance runner iglidur® Q2 – The durable heavy duty bearing 120
64 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 65
iglidur®
iglidur standards | Selection according to main criteria
® standard
product
range
Installation tolerances E10 D11 E10 E10 E10 E10 E10 F10 F10 F10 F10 F10 E10 F10 F10 E10
Resistant to impacts/shock
Resistant to dirt
Corrosion free
Electrically conductive
RoHS-II 2011/65/EC
Fire class in accordance with UL-94 HB V-2 HB HB HB HB HB V-0 V-0 V-0 V-0 V-0 HB V-0 V-1 HB
Availabilities / variants
Type S, sleeve
Stock plate
66 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 67
iglidur®
iglidur standards | Material properties table
® standard
product
range
iglidur® Unit G M250 P210 P J W300 J3 J350 X Z H1 H370 A181 A350 A500 Q2
General properties
Density [g/cm3] 1.46 1.14 1.40 1.58 1.49 1.24 1.42 1.44 1.44 1.4 1.53 1.66 1.38 1.42 1.28 1.46
Colour
Max. water absorption [% weight] 4.0 7.6 0.5 0.4 1.3 6.5 1.3 1.6 0.5 1.1 0.3 0.1 1.3 1.9 0.5 4.6
Coefficient of sliding friction, dynamic, 0.08– 0.18– 0.07– 0.06– 0.06– 0.08– 0.06– 0.10– 0.09– 0.06– 0.06– 0.07– 0.10– 0.10– 0.26– 0.22–
[µ]
against steel 0.15 0.40 0.19 0.21 0.18 0.23 0.20 0.20 0.27 0.14 0.20 0.17 0.21 0.20 0.41 0.42
pv value, max. (dry) [MPa · m/s] 0.42 0.12 0.4 0.39 0.34 0.23 0.5 0.45 1.32 0.84 0.80 0.74 0.31 0.40 0.28 0.7
Mechanical properties
Flexural modulus [MPa] 7,800 2,700 2,500 5,300 2,400 3,500 2,700 2,000 8,100 2,400 2,800 11,100 1,913 2,000 3,600 8,370
Flexural strength at +20 °C [MPa] 210 112 70 120 73 125 70 55 170 95 55 135 48 110 140 240
Shore-D-Hardness 81 79 75 75 74 77 73 80 85 81 77 82 76 76 83 80
Max. short-term application temperature [°C] +220 +170 +160 +200 +120 +180 +120 +220 +315 +310 +240 +240 +110 +210 +300 +200
Min. long-term application temperature [°C] –40 –40 –40 –40 –50 –40 –50 –100 –100 –100 –40 –40 –50 –100 –100 –40
Thermal conductivity [W/m · K] 0.24 0.24 0.25 0.25 0.25 0.24 0.25 0.24 0.60 0.62 0.24 0.5 0.25 0.24 0.24 0.24
Electrical properties
Specific contact resistance [Ωcm] > 1013 > 1013 > 1012 > 1013 > 1013 > 1013 > 1012 > 1013 < 105 > 1011 > 1012 < 105 > 1012 > 1011 > 1014 > 1013
Surface resistance [Ω] > 1011 > 1011 > 1011 > 1012 > 1012 > 1012 > 1012 > 1010 < 103 > 1011 > 1011 < 105 > 1012 > 1011 > 1013 > 1011
68 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 69
_SM iglidur® standards | Product range iglidur® standards | Product range _SM
Sleeve bearing (Form S) Absolute flexibility: all iglidur® standard sizes available from stock
30°
P210 Specialist for pivoting, rolling applications and more
Type Dimensions [mm]
P The low-priced outdoor all-rounder
d1
d2
0.5 J The versatile endurance runner
iglidur® material
30°
Outer-Ø d2
Inner-Ø d1
Length b1
Form S
J350 Endurance runner with high dimensional stability at high temperature
Metric
X The chemical and temperature specialist
2)
Thickness < 1 mm: chamfer = 20°
Z Extremely long service life under extreme conditions
to the tolerances (more information in material specific chapters) to the tolerances (more information in material specific chapters)
70 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 71
_FM iglidur® standards | Product range iglidur® standards | Product range _FM
Flange bearing (Form F) Absolute flexibility: all iglidur® standard sizes available from stock
.5
.0 G The classic all-rounder
ax Order key
f1
30
m
r
°
P210 Specialist for pivoting, rolling applications and more
Type Dimensions [mm]
P The low-priced outdoor all-rounder
d2
d3
d1
J The versatile endurance runner
iglidur® material
b2 J3 The new endurance runner: specialist for pulsating loads
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
J350 Endurance runner with high dimensional stability at high temperature
Metric
X The chemical and temperature specialist
2)
Thickness < 1 mm: chamfer = 20°
Z Extremely long service life under extreme conditions
to the tolerances (more information in material specific chapters) to the tolerances (more information in material specific chapters)
72 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 73
iglidur all-rounder materials
®
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
The iglidur® materials are summarised in this Available from stock
[µ] 125)
group, which have a universal use under normal Detailed information about delivery time online.
conditions (temperature, media, etc.).
iglidur ® G is the decathlete among iglidur ® Block pricing online iglidur® K – Versatile and cost-effective 170
materials. It performs exceedingly well in almost all No minimum order value. From batch size 1. For medium temperatures and wet environments
50 0.16
technical disciplines. The iglidur® GLW is specially Page 123 0.60
suitable for solutions in large batches. Ø 1–195 mm
iglidur® P and iglidur® K have a similar potential More dimensions upon request
as iglidur® G paired with significantly reduced
moisture absorption, which is advantageous for Imperial dimensions available iglidur® GLW – Low-cost material for high quantities
80
use in wet environments. From page 1391 For applications with mostly static loads 0.23 8.30
100
●● Lubrication and maintenance-free Page 131
●● Lightweight Online product finder
●● Good price / performance ratio www.igus.eu/iglidur-finder 123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
●● Predictable service life 125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
[µ] 125)
iglidur® G – The classic all-rounder
80
Excellent price-performance ratio 130 0.22
1.75
Page 79
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
76 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 77
The classic all-rounder –
iglidur G ®
78
G
iglidur®
G iglidur G | The classic all-rounder
®
iglidur G | Technical data
® +130 °C
80 MPa
Excellent price-performance ratio
Material properties
Maintenance-free dry running iglidur® G bearings cover an extremely wide range General properties Unit iglidur® G Testing method
of different requirements – they are truly "all-round". Density g/cm3 1.46
The material is ideal for universal applications, Colour dark grey
a truly "all-round". Typical applications include Max. moisture absorption at +23 °C/50 % r.h. % weight 0.7 DIN 53495
medium to high loads, medium sliding speeds Max. water absorption % weight 4.0
and medium temperatures. Coefficient of sliding friction, dynamic, against steel µ 0.08–0.15
pv value, max. (dry) MPa · m/s 0.42
High wear resistance Mechanical properties
Flexural modulus MPa 7,800 DIN 53457
When to use it? Flexural strength at +20 °C MPa 210 DIN 53452
●● Economical all-round performance bearing Compressive strength MPa 78
●● For low to average surface speeds Max. recommended surface pressure (+20 °C) MPa 80
●● When the bearing needs to run on different Shore-D hardness 81 DIN 53505
shaft materials Physical and thermal properties
●● For oscillating and rotational movements Max. long-term application temperature °C +130
Resistance to Max. short-term application temperature °C +220
dust and dirt Min. long-term application temperature °C –40
Heat conductivity W/m · K 0.24 ASTM C 177
When not to use it? Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
9 DIN 53752
●● When mechanical reaming of the wall surface Electrical properties
is necessary Specific contact resistance Ωcm > 1013 DIN IEC 93
iglidur® M250, page 95 Surface resistance Ω > 10 11
DIN 53482
Cost-effective ●● When the highest wear resistance is required Table 01: Material properties table
iglidur® W300, page 153
100.0
●● When universal chemical resistance is Radiation resistance
required Plain bearings made from iglidur® G are resistant to radiation
iglidur® X, page 245 10.0 up to an intensity of 3 · 102 Gy.
●● When temperatures are constantly higher
than +130 °C UV resistance
iglidur® H, page 313 1.0 iglidur® G plain bearings are permanently resistant to UV
Load [MPa]
iglidur® X, page 245 radiation.
iglidur® H370, page 305
Available from stock 0.1
●● For underwater use 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Detailed information about delivery time online.
iglidur® H370, page 305 Surface speed [m/s] Alcohol + to 0
Diagram 01: Permissible pv values for iglidur® G bearings Hydrocarbons +
Block pricing online
Typical application areas with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
No minimum order value. From batch size 1.
●● Agricultural machines shaft, at +20 °C, mounted in a steel housing Fuels +
●● Construction machinery industry Diluted acids 0 to –
Max. +130 °C
●● Machine building Moisture absorption Strong acids –
Min. –40 °C
●● Sports and leisure The moisture absorption of iglidur® G plain bearings is Diluted alkalines +
●● Automotive industry approximately 0.7 % weight in standard climatic conditions. Strong alkalines 0
Ø 1.5–195 mm
●● Mechatronics The saturation limit submerged in water is 4 % weight. This
More dimensions upon request + resistant 0 conditionally resistant – not resistant
must be taken into account for these types of applications.
All data given at room temperature [+20 °C]
Imperial dimensions available Diagram, www.igus.eu/g-moisture Table 02: Chemical resistance
From page 1391
Vacuum
iglidur® G plain bearings outgas in a vacuum. Use in vacuum Chemical table, page 1478
Online product finder
is only possible with dehumidified bearings.
www.igus.eu/iglidur-finder
80 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 81
G G
+130 °C iglidur G | Technical data
®
iglidur G | Technical data ® +130 °C
80 MPa 80 MPa
0.35 200
iglidur® G is the decathlete among iglidur® materials. It Permissible surface speeds 180
0.30
performs exceedingly well in all technical disciplines and is iglidur® G has been developed for low to medium surface 160 rotating oscillating
the classic all-rounder, primarily with respect to the overall speeds. The maximum values shown in table 03 can only 0.25 140
Wear [µm/km]
Mechanical properties levels. In practice, though, this temperature level is rarely 0.10 60
With increasing temperatures, the compressive strength reached due to varying application conditions. 40
0.05
20
of iglidur® G plain bearings decreases. The diagram 02
Surface speed, page 44 0.00 0
shows this inverse relationship. However, at the long-term 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80
maximum temperature of +130 °C the permissible surface m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
pressure is almost 35 MPa. The permissible maximum Continuous 1 0.7 4 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
surface pressure is a mechanical material parameter. No Short-term 2 1.4 5 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
conclusions regarding the tribological properties can be steel, as a function of the pressure
Table 03: Maximum surface speeds
drawn from this.
from iglidur® G. It is important to notice that with increasing depending on the wall thickness (please see product range
20 securing is required.
loads, the recommended hardness of the shaft increases. table).
0 Application temperatures, page 49 The "soft" shafts tend to wear more easily and thus the
20 30 40 50 60 70 80 90 100 110 120 130 Additional securing, page 49 wear of the overall system. If the loads exceed 2 MPa it is Testing methods, page 57
Temperature [°C]
important to recognise that the wear rate (the gradient of
Diagram 02: Permissible maximum surface pressure of
the curves) clearly decreases with the hard shaft materials. Diameter Shaft iglidur® G Housing
as a function of temperature (80 MPa at +20 °C) Friction and wear
If the shaft material you plan on using is not shown in these d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Similar to wear resistance, the coefficient of friction µ also
test results, please contact us. up to 3 0–0.025 +0.014 +0.054 0 +0.010
Diagram 03 shows the elastic deformation of iglidur G ®
changes with the speed and load (diagrams 04 and 05).
at radial loads. The plastic deformation is minimal up to > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Coefficients of friction and surfaces, page 47 Shaft materials, page 52 > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
a pressure of approximately 100 MPa. However, it is also
Wear resistance, page 50 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
dependent on the service time.
iglidur® G Dry Greases Oil Water > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Surface pressure, page 41 C. o. f. µ 0.08–0.15 0.09 0.04 0.04 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Table 04: Coefficient of friction against steel (Ra = 1 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
μm, 50 HRC) > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
10 0.5 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
9
8 +23 °C +60 °C 12 Table 05: Important tolerances for plain bearings
0.4
7 according to ISO 3547-1 after pressfit
Coefficient of friction [µ]
10
6
5 0.3
HR carbon steel
3
H.a. aluminium
0.2
2
Wear [µm/km]
4
1
304 SS
0 0.1 2 Cf53
0 25 50 75 100 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s] 0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa p = 1 MPa, v = 0.3 m/s
82 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 83
GSM iglidur® G | Product range iglidur® G | Product range GSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
8.0 +0.025 10.0 22.0 GSM-0810-22 12.0 14.0 25.0 GSM-1214-25
+0.032
8.0 +0.083 10.1 25.0 GSM-0810-25 12.0 15.0 6.0 GSM-1215-06
d1
d2
0.5 +0.102
+0.040 12.0 15.0 22.0 GSM-1215-22
8.0 12.0 9.0 GSM-0812-09
+0.130 12.0 +0.050 16.0 10.0 GSM-1216-10
30°
iglidur® material
9.0 +0.013 10.0 12.0 GSM-0910-12 12.0 +0.160 16.0 20.0 GSM-1216-20
b1
9.0 +0.049 10.0 16.0 GSM-0910-16 13.0 15.0 7.0 GSM-1315-070
Outer-Ø d2
Inner-Ø d1
Length b1
9.0 +0.025 11.0 6.0 GSM-0911-06 13.0 15.0 7.5 GSM-1315-075
Form S
Metric
9.0 +0.083 11.0 20.0 GSM-0911-20 13.0 15.0 10.0 GSM-1315-10
2)
Thickness < 1 mm: chamfer = 20° 10.0 11.0 6.0 GSM-1011-06 13.0 15.0 15.0 GSM-1315-15
10.0 11.0 7.0 GSM-1011-07 13.0 15.0 20.0 GSM-1315-20
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 10.0 +0.013 11.0 10.0 GSM-1011-10 13.0 15.0 25.0 GSM-1315-25
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 10.0 +0.049 11.0 20.0 GSM-1011-20 14.0 16.0 3.0 GSM-1416-03
f [mm]: 0.3 0.5 0.8 1.2 +0.032
Imperial dimensions available 10.0 11.0 25.0 GSM-1011-25 14.0 16.0 6.0 GSM-1416-06
+0.102
From page 1402 10.0 11.0 30.0 GSM-1011-30 14.0 16.0 8.0 GSM-1416-08
Dimensions [mm] 10.0 12.0 4.0 GSM-1012-04 14.0 16.0 10.0 GSM-1416-10
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 10.0 12.0 4.5 GSM-1012-045 14.0 16.0 12.0 GSM-1416-12
Tolerance3) h13 Tolerance3) h13 10.0 12.0 5.0 GSM-1012-05 14.0 16.0 15.0 GSM-1416-15
1.5 3.0 2.0 GSM-0103-02 6.0 8.0 6.0 GSM-0608-06 10.0 12.0 6.0 GSM-1012-06 14.0 16.0 20.0 GSM-1416-20
2.0 3.5 3.0 GSM-0203-03 6.0 8.0 8.0 GSM-0608-08 10.0 12.0 7.0 GSM-1012-07 14.0 16.0 25.0 GSM-1416-25
2.5 +0.014 4.5 5.0 GSM-02504-05 6.0 +0.020 8.0 9.5 GSM-0608-09 10.0 12.0 8.0 GSM-1012-08 14.0 16.0 45.0 GSM-1416-45
3.0 +0.054 4.5 3.0 GSM-0304-03 6.0 +0.068 8.0 10.0 GSM-0608-10 10.0 +0.025 12.0 9.0 GSM-1012-09 15.0 +0.016 16.0 10.0 GSM-1516-10
3.0 4.5 5.0 GSM-0304-05 6.0 8.0 11.8 GSM-0608-11 10.0 +0.083 12.0 10.0 GSM-1012-10 15.0 +0.059 16.0 15.0 GSM-1516-15
3.0 4.5 6.0 GSM-0304-06 6.0 8.0 13.8 GSM-0608-13 10.0 12.0 12.0 GSM-1012-12 15.0 17.0 4.0 GSM-1517-04
4.0 5.5 4.0 GSM-0405-04 7.0 +0.013 8.0 10.0 GSM-0708-10 10.0 12.0 14.0 GSM-1012-14 15.0 17.0 10.0 GSM-1517-10
4.0 +0.020 5.5 6.0 GSM-0405-06 7.0 +0.049 8.0 19.0 GSM-0708-19 10.0 12.0 15.0 GSM-1012-15 15.0 17.0 12.0 GSM-1517-12
4.5 +0.068 6.0 8.0 GSM-0406-08 7.0 9.0 8.0 GSM-0709-08 10.0 12.0 17.0 GSM-1012-17 15.0 17.0 15.0 GSM-1517-15
4.0 7.0 5.5 GSM-0407-05 7.0 +0.025 9.0 9.0 GSM-0709-09 10.0 12.0 20.0 GSM-1012-20 15.0 17.0 20.0 GSM-1517-20
5.0 6.0 4.6 GSM-0506-046 7.0 +0.083 9.0 10.0 GSM-0709-10 10.0 13.0 13.5 GSM-1013-13 15.0 17.0 25.0 GSM-1517-25
+0.010
5.0 6.0 5.0 GSM-0506-05 7.0 9.0 12.0 GSM-0709-12 10.0 +0.025 14.0 10.0 GSM-1014-10 16.0 18.0 5.5 GSM-1618-055
+0.040
5.0 6.0 7.0 GSM-0506-07 8.0 9.0 5.0 GSM-0809-05 10.0 +0.115 14.0 20.0 GSM-1014-20 16.0 18.0 8.0 GSM-1618-08
5.0 7.0 5.0 GSM-0507-05 8.0 +0.013 9.0 6.0 GSM-0809-06 +0.040 16.0 +0.032 18.0 10.0 GSM-1618-10
10.0 16.0 10.0 GSM-1016-10
5.0 +0.020 7.0 7.0 GSM-0507-07 8.0 +0.049 9.0 8.0 GSM-0809-08 +0.130 16.0 +0.102 18.0 12.0 GSM-1618-12
5.0 +0.068 7.0 8.0 GSM-0507-08 8.0 9.0 12.0 GSM-0809-12 12.0 13.0 4.7 GSM-1213-047 16.0 18.0 13.5 GSM-1618-13.5
5.0 7.0 10.0 GSM-0507-10 8.0 10.0 5.0 GSM-0810-05 12.0 +0.016 13.0 10.0 GSM-1213-10 16.0 18.0 15.0 GSM-1618-15
6.0 7.0 6.0 GSM-0607-06 8.0 10.0 6.0 GSM-0810-06 12.0 +0.059 13.0 12.0 GSM-1213-12 16.0 18.0 20.0 GSM-1618-20
6.0 7.0 12.0 GSM-0607-12 8.0 10.0 6.8 GSM-0810-07 12.0 13.0 15.0 GSM-1213-15 16.0 18.0 25.0 GSM-1618-25
+0.010
6.0 7.0 17.0 GSM-0607-17 8.0 10.0 8.0 GSM-0810-08 12.0 14.0 4.0 GSM-1214-04 16.0 18.0 30.0 GSM-1618-30
+0.040
6.0 7.0 17.5 GSM-0607-17.5 8.0 10.0 10.0 GSM-0810-10 12.0 14.0 5.0 GSM-1214-05 16.0 18.0 38.5 GSM-1618-38.5
6.0 7.0 19.0 GSM-0607-19 8.0 +0.025 10.0 12.0 GSM-0810-12 12.0 14.0 6.0 GSM-1214-06 16.0 18.0 50.0 GSM-1618-50
6.0 8.0 1.5 GSM-0608-015 8.0 +0.083 10.0 13.8 GSM-0810-13 12.0 14.0 8.0 GSM-1214-08 17.0 19.0 15.0 GSM-1719-15
+0.032
6.0 8.0 2.5 GSM-0608-025 8.0 10.0 14.0 GSM-0810-14 12.0 14.0 10.0 GSM-1214-10 +0.016
+0.102 18.0 19.0 15.0 GSM-1819-15
6.0 +0.020 8.0 3.0 GSM-0608-03 8.0 10.0 15.0 GSM-0810-15 12.0 14.0 12.0 GSM-1214-12 +0.059
6.0 +0.068 8.0 4.0 GSM-0608-04 8.0 10.0 16.0 GSM-0810-16 12.0 14.0 14.0 GSM-1214-14 18.0 20.0 6.0 GSM-1820-06
+0.032
6.0 8.0 5.0 GSM-0608-05 8.0 10.0 18.0 GSM-0810-18 12.0 14.0 15.0 GSM-1214-15 18.0 20.0 10.0 GSM-1820-10
+0.102
6.0 8.0 5.5 GSM-0608-055 8.0 10.0 20.0 GSM-0810-20 12.0 14.0 20.0 GSM-1214-20 18.0 20.0 12.0 GSM-1820-12
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
84 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 85
GSM iglidur® G | Product range iglidur® G | Product range GSM
86 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 87
GFM iglidur® G | Product range iglidur® G | Product range GFM
30
m
r d1 d1- d2 d3 b1 b2 Part No. d1 d1 - d2 d3 b1 b2 Part No.
°
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
8.0 10.0 15.0 3.0 1.0 GFM-0810-03 11.0 12.0 16.0 6.0 0.5 GFM-1112-06
8.0 10.0 15.0 4.0 1.0 GFM-0810-04 12.0 +0.016 13.0 17.0 3.0 0.5 GFM-1213-03
d2
d3
d1
8.0 10.0 15.0 5.5 1.0 GFM-0810-05 12.0 +0.059 13.0 15.0 12.0 0.5 GFM-121315-12
8.0 10.0 15.0 6.5 1.0 GFM-0810-065 12.0 13.0 17.0 12.0 0.5 GFM-1213-12
iglidur® material
8.0 10.0 15.0 7.5 1.0 GFM-0810-07 12.0 14.0 20.0 3.0 1.0 GFM-1214-03
b2
8.0 10.0 15.0 9.5 1.0 GFM-0810-09 12.0 14.0 20.0 5.0 1.0 GFM-1214-05
Outer-Ø d2
Inner-Ø d1
+0.025
Length b1
b1 8.0 10.0 15.0 10.0 1.0 GFM-0810-10 12.0 14.0 20.0 6.0 1.0 GFM-1214-06
+0.083
Form F
Metric
8.0 10.0 14.0 11.0 1.0 GFM-0810-11 12.0 14.0 20.0 7.0 1.0 GFM-1214-07
2)
Thickness < 1 mm: chamfer = 20° 8.0 10.0 15.0 15.0 1.0 GFM-0810-15 12.0 14.0 20.0 9.0 1.0 GFM-1214-09
8.0 10.0 15.0 25.0 1.0 GFM-0810-25 12.0 14.0 20.0 10.0 1.0 GFM-1214-10
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 8.0 10.0 15.0 30.0 1.0 GFM-0810-30 12.0 14.0 20.0 11.0 1.0 GFM-1214-11
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 8.0 10.0 12.0 12.5 1.0 GFM-081012-125 12.0 14.0 20.0 12.0 1.0 GFM-1214-12
f [mm]: 0.3 0.5 0.8 1.2 8.0 10.0 13.0 8.0 1.0 GFM-081013-08 12.0 14.0 20.0 15.0 1.0 GFM-1214-15
Imperial dimensions available
From page 1428 +0.040 12.0 14.0 20.0 17.0 1.0 GFM-1214-17
Dimensions [mm] 8.0 10.0 14.0 5.0 1.0 GFM-081014-05
+0.098 12.0 14.0 20.0 20.0 1.0 GFM-1214-20
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No. 8.0 +0.025 10.0 14.0 6.0 1.0 GFM-081014-06 12.0 14.0 20.0 24.0 1.0 GFM-1214-24
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14 8.0 +0.083 10.0 14.0 8.0 1.0 GFM-081014-08 12.0 14.0 20.0 31.0 1.0 GFM-1214-31
3.0 4.5 7.5 2.0 0.5 GFM-0304-02 6.0 +0.010 7.0 11.0 6.0 0.5 GFM-0607-06 +0.040 12.0 14.0 20.0 40.0 1.0 GFM-1214-40
8.0 10.0 14.0 10.0 1.0 GFM-081014-10
3.0 4.5 7.0 2.7 0.75 GFM-0304-0275 6.0 +0.040 7.0 11.0 10.0 0.5 GFM-0607-10 +0.098 12.0 14.0 18.0 4.0 1.0 GFM-121418-04
+0.014 +0.032
3.0 4.5 7.5 3.0 0.75 GFM-0304-03 6.0 8.0 12.0 2.5 1.0 GFM-0608-025 8.0 10.0 16.0 11.5 1.5 GFM-081016-11 12.0 14.0 18.0 8.0 1.0 GFM-121418-08
+0.054 +0.102
3.0 4.5 7.5 5.0 0.75 GFM-0304-05 6.0 8.0 12.0 4.0 1.0 GFM-0608-04 8.0 +0.025 10.0 16.0 15.0 1.5 GFM-081016-15 12.0 14.0 18.0 10.0 1.0 GFM-121418-10
3.0 4.5 7.0 5.0 0.75 GFM-030407-05 6.0 8.0 12.0 4.8 1.0 GFM-0608-048 8.0 +0.083 10.0 17.0 15.0 1.0 GFM-081017-15 12.0 14.0 18.0 12.0 1.0 GFM-121418-12
4.0 +0.010 5.0 9.5 4.0 0.5 GFM-04050-04 6.0 8.0 12.0 5.0 1.0 GFM-0608-05 8.0 10.0 18.0 3.0 1.0 GFM-081018-03 12.0 14.0 18.0 15.0 1.0 GFM-121418-15
4.0 +0.040 5.0 9.5 6.0 0.5 GFM-04050-06 6.0 8.0 12.0 6.0 1.0 GFM-0608-06 8.0 +0.040 12.0 16.0 6.0 2.0 GFM-0812-06 12.0 14.0 18.0 20.0 1.0 GFM-121418-20
4.0 5.5 9.5 2.5 0.75 GFM-0405-0255 6.0 +0.020 8.0 12.0 7.0 1.0 GFM-0608-07 8.0 +0.130 12.0 21.0 8.0 2.0 GFM-081221-08 13.0 15.0 22.0 6.0 1.0 GFM-1315-06
4.0 5.5 9.5 3.0 0.75 GFM-0405-03 6.0 +0.068 8.0 12.0 8.0 1.0 GFM-0608-08 9.0 +0.013 10.0 15.0 6.5 0.5 GFM-0910-065 13.0 15.0 22.0 8.0 1.0 GFM-1315-08
+0.020
4.0 5.5 9.5 4.0 0.75 GFM-0405-04 6.0 8.0 12.0 10.0 1.0 GFM-0608-10 9.0 +0.049 10.0 15.0 17.5 0.5 GFM-0910-17 13.0 15.0 22.0 40.0 1.0 GFM-131522-40
+0.068
4.0 5.5 9.5 6.0 0.75 GFM-0405-06 6.0 8.0 12.0 25.0 1.0 GFM-0608-25 +0.013 14.0 16.0 22.0 3.0 1.0 GFM-1416-03
10.0 11.0 20.0 3.5 0.5 GFM-1011-03
4.0 5.5 8.0 10.0 1.0 GFM-040508-10 6.0 8.0 12.0 35.0 1.0 GFM-0608-35 +0.046 14.0 16.0 22.0 4.0 1.0 GFM-1416-04
5.0 6.0 10.0 3.5 0.5 GFM-0506-035 6.0 8.0 14.0 2.8 1.0 GFM-060814-028 10.0 +0.013 11.0 15.0 4.4 0.5 GFM-1011-044 14.0 16.0 22.0 6.0 1.0 GFM-1416-06
5.0 6.0 10.0 4.0 0.5 GFM-0506-04 6.0 8.0 14.0 12.0 1.0 GFM-060814-12 10.0 +0.049 11.0 15.0 10.0 0.5 GFM-1011-10 14.0 16.0 22.0 8.0 1.0 GFM-1416-08
+0.010
5.0 6.0 10.0 5.0 0.5 GFM-0506-05 7.0 8.0 12.0 1.7 0.5 GFM-0708-017 10.0 12.0 18.0 3.5 1.0 GFM-1012-035 14.0 16.0 22.0 10.0 1.0 GFM-1416-10
+0.040
5.0 6.0 10.0 6.0 0.5 GFM-0506-06 7.0 +0.013 8.0 12.0 3.0 0.5 GFM-0708-03 10.0 12.0 18.0 4.0 1.0 GFM-1012-04 14.0 16.0 22.0 12.0 1.0 GFM-1416-12
5.0 6.0 10.0 15.3 0.5 GFM-0506-15 7.0 +0.049 8.0 12.0 6.0 0.5 GFM-0708-06 10.0 12.0 18.0 5.0 1.0 GFM-1012-05 14.0 16.0 22.0 17.0 1.0 GFM-1416-17
5.0 7.0 11.0 3.5 1.0 GFM-0507-03 7.0 8.0 12.0 8.0 0.5 GFM-0708-08 10.0 12.0 18.0 6.0 1.0 GFM-1012-06 14.0 16.0 22.0 21.0 1.0 GFM-1416-21
5.0 7.0 11.0 4.0 1.0 GFM-0507-04 7.0 9.0 15.0 3.5 1.0 GFM-0709-035 10.0 12.0 18.0 7.0 1.0 GFM-1012-07 15.0 16.0 20.0 2.0 0.5 GFM-1516-02
5.0 7.0 11.0 5.0 1.0 GFM-0507-05 7.0 9.0 15.0 6.0 1.0 GFM-0709-06 10.0 12.0 18.0 9.0 1.0 GFM-1012-09 15.0 +0.016 16.0 20.0 2.5 0.5 GFM-1516-025
+0.025
5.0 7.0 11.0 7.0 1.0 GFM-0507-07 7.0 9.0 15.0 10.0 1.0 GFM-0709-10 10.0 +0.025 12.0 18.0 10.0 1.0 GFM-1012-10 15.0 +0.059 16.0 20.0 3.0 0.5 GFM-1516-03
+0.020 +0.083
5.0 7.0 11.0 11.0 1.0 GFM-0507-11 7.0 9.0 15.0 12.0 1.0 GFM-0709-12 10.0 +0.083 12.0 18.0 12.0 1.0 GFM-1012-12 15.0 16.0 20.0 15.0 0.5 GFM-1516-15
+0.068
5.0 7.0 11.0 14.5 1.0 GFM-0507-145 7.0 9.0 19.0 10.0 1.0 GFM-070919-10 10.0 12.0 18.0 15.0 1.0 GFM-1012-15 15.0 17.0 23.0 4.0 1.0 GFM-1517-04
5.0 7.0 11.0 30.0 1.0 GFM-0507-30 8.0 9.0 15.0 3.0 0.5 GFM-0809-03 10.0 12.0 18.0 17.0 1.0 GFM-1012-17 15.0 17.0 23.0 4.5 1.0 GFM-1517-045
5.0 7.0 9.5 5.0 1.0 GFM-050709-05 8.0 9.0 13.0 3.5 0.5 GFM-0809-035 10.0 12.0 15.0 12.0 1.0 GFM-101215-12 15.0 +0.032 17.0 23.0 5.0 1.0 GFM-1517-05
+0.013
5.0 7.0 15.0 4.0 1.0 GFM-050715-04 8.0 9.0 13.0 5.5 0.5 GFM-0809-055 10.0 12.0 16.0 6.0 1.0 GFM-101216-06 15.0 +0.102 17.0 23.0 9.0 1.0 GFM-1517-09
+0.049
6.0 +0.010 7.0 11.0 2.4 0.5 GFM-0607-024 8.0 9.0 13.0 8.0 0.5 GFM-0809-08 10.0 12.0 16.0 9.0 1.0 GFM-101216-09 15.0 17.0 23.0 12.0 1.0 GFM-1517-12
6.0 +0.040 7.0 11.0 4.5 0.5 GFM-0607-045 8.0 9.0 13.0 12.0 0.5 GFM-0809-12 10.0 12.0 16.0 15.0 1.0 GFM-101216-15 15.0 17.0 23.0 17.0 1.0 GFM-1517-17
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
88 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 89
GFM iglidur® G | Product range iglidur® G | Product range GFM
90 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 91
GTM iglidur® G | Product range iglidur® G | Product range GTM
s
d2
+0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12
Type Dimensions [mm]
+0.12 +0.125 –0.2
14.0 20.0 1.5 4) 4)
1.0 20.0 GTM-1420-015
14.0 26.0 1.5 20.0 2.0 1.0 26.0 GTM-1426-015
d5
d4 15.0 22.0 0.8 4) 4)
0.5 22.0 GTM-1522-008
iglidur® material
15.0 19.0 0.8 4) 4)
0.5 19.0 GTM-1519-008
d6
15.0 24.0 1.5 19.5 1.5 1.0 24.0 GTM-1524-015
Thickness s
Outer-Ø d2
h
Inner-Ø d1
15.0 24.0 2.75 4) 4)
2.0 24.0 GTM-1524-0275
Form T
Metric
16.0 28.0 1.0 4) 4)
0.7 28.0 GTM-1628-010
16.0 30.0 1.5 22.0 2.0 1.0 30.0 GTM-1630-015
18.0 32.0 1.5 25.0 2.0 1.0 32.0 GTM-1832-015
Dimensions according to ISO 3547-1 Imperial dimensions available 20.0 36.0 1.5 28.0 3.0 1.0 36.0 GTM-2036-015
and special dimensions From page 1445 22.0 30.0 1.5 4) 4)
1.0 30.0 GTM-2230-015
22.0 38.0 1.5 30.0 3.0 1.0 38.0 GTM-2238-015
Dimensions [mm] 24.0 42.0 1.5 33.0 3.0 1.0 42.0 GTM-2442-015
d1 d2 s d4 d5 h d6 Part No. 26.0 44.0 1.5 35.0 3.0 1.0 44.0 GTM-2644-015
+0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12 28.5 35.8 0.5 4) 4)
0.2 35.8 GTM-2835-005
+0.12 +0.125 –0.2 28.0 48.0 1.5 38.0 4.0 1.0 48.0 GTM-2848-015
4.0 8.0 0.5 4) 4)
0.2 8.0 GTM-0408-005 32.0 45.8 1.0 4) 4)
0.7 45.8 GTM-3246-010
4.0 9.0 0.6 4) 4)
0.3 9.0 GTM-0409-006 32.0 54.0 1.5 43.0 4.0 1.0 54.0 GTM-3254-015
4.0 9.0 1.6 4) 4)
0.3 9.0 GTM-0409-016 38.0 62.0 1.5 50.0 4.0 1.0 62.0 GTM-3862-015
4.0 10.0 0.5 4) 4)
0.2 10.0 GTM-0410-005 42.0 66.0 1.5 54.0 4.0 1.0 66.0 GTM-4266-015
4.0 11.0 0.5 (-0.06) 4) 4)
0.2 11.0 GTM-0411-005 48.0 60.0 2.0 4) 4)
1.5 60.0 GTM-4860-020
5.0 9.5 0.6 4) 4)
0.3 9.5 GTM-0509-006 48.0 74.0 2.0 61.0 4.0 1.5 74.0 GTM-4874-020
6.0 11.0 1.0 4) 4)
0.7 11.0 GTM-0611-010 52.0 78.0 2.0 65.0 4.0 1.5 78.0 GTM-5278-020
6.0 12.0 1.5 4) 4)
1.0 12.0 GTM-0612-015 52.5 69.0 2.0 4) 4)
1.5 69.0 GTM-52569-020
6.0 15.0 1.5 4) 4)
1.0 15.0 GTM-0615-015 62.0 78.0 2.0 4) 4)
1.5 78.0 GTM-6278-020
6.0 20.0 1.5 13.0 1.5 1.0 20.0 GTM-0620-015 62.0 90.0 1.0 4) 4)
0.7 90.0 GTM-6290-010
7.0 12.0 0.5 4) 4)
0.2 12.0 GTM-0712-005 62.0 90.0 2.0 76.0 4.0 1.5 90.0 GTM-6290-020
7.0 13.0 0.5 4) 4)
0.2 13.0 GTM-0713-005 68.0 81.0 2.0 4) 4)
1.5 81.0 GTM-6881-020
8.0 15.0 0.5 4) 4)
0.2 15.0 GTM-0815-005 78.0 114.0 1.5 4) 4)
1.0 114.0 GTM-78114-015
8.0 15.0 1.5 4) 4)
1.0 15.0 GTM-0815-015 80.5 114.0 1.5 4) 4)
1.0 114.0 GTM-80114-015
8.0 18.0 1.0 4) 4)
0.7 18.0 GTM-0818-010 4)
Design without fixing bore
8.0 18.0 1.5 13.0 1.5 1.0 18.0 GTM-0818-015
8.0 18.0 2.0 4) 4)
1.5 18.0 GTM-0818-020
9.0 13.0 1.0 4) 4)
0.7 13.0 GTM-0913-010
9.0 18.0 1.5 13.5 1.5 1.0 18.0 GTM-0918-015
10.0 17.8 0.5 4) 4)
0.2 17.8 GTM-1018-005
10.0 18.0 1.0 4) 4)
0.7 18.0 GTM-1018-010
10.0 18.0 1.5 4) 4)
1.0 18.0 GTM-1018-015
10.0 18.0 2.0 4) 4)
1.5 18.0 GTM-1018-020
10.0 20.0 1.5 4) 4)
0.7 20.0 GTM-1020-015
11.0 15.0 1.0 4) 4)
0.7 15.0 GTM-1115-010
11.0 27.0 0.5 4) 4)
0.2 27.0 GTM-1127-005
12.0 24.0 1.5 18.0 1.5 1.0 24.0 GTM-1224-015 Even more dimensions from stock
12.2 30.0 1.5 4) 4)
1.0 30.0 GTM-1230-015 More than 300 dimensions are now available. Search online for your required bearing.
4)
Design without fixing bore www.igus.eu/iglidur-specialbearings
92 Online tools and more information www.igus.eu/g 3D-CAD files, prices and delivery time online www.igus.eu/g 93
iglidur®
G My sketches
Load [MPa]
0.1
iglidur® J, page 141 iglidur® M250 plain bearings are permanently resistant to
●● When a cost-effective wear resistant bearing UV radiation.
0.01
Available from stock is required 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. iglidur® R, page 221 Surface speed [m/s] Medium Resistance
Diagram 01: Permissible pv values for iglidur® M250 Alcohol + to 0
Block pricing online Typical application areas bearings with a wall thickness of 1 mm dry running against Hydrocarbons +
No minimum order value. From batch size 1. ●● Agricultural machines a steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Furniture/Industrial design Fuels +
Max. +80 °C ●● Textile industry Moisture absorption Diluted acids 0 to –
Min. –40 °C ●● Doors and gates The humidity absorption of iglidur® M250 bearings amounts Strong acids –
●● Machine building to about 1.4 % weight in standard climatic conditions. The Diluted alkalines +
Ø 1–75 mm saturation limit in water is 7.6 % weight. This must be taken Strong alkalines 0
More dimensions upon request into account for these types of applications.
+ resistant 0 conditionally resistant – not resistant
Diagram, www.igus.eu/m250-moisture All data given at room temperature [+20 °C]
Imperial dimensions available
Table 02: Chemical resistance
From page 1391 Vacuum
iglidur® M250 plain bearings outgas in a vacuum. The
Online product finder relatively high moisture absorption of the bearing allows Chemical table, page 1478
www.igus.eu/iglidur-finder only limited use in vacuum.
96 Online tools and more information www.igus.eu/m250 3D-CAD files, prices and delivery time online www.igus.eu/m250 97
M250 M250
+80 °C iglidur M250 | Technical data
®
iglidur M250 | Technical data ® +80 °C
20 MPa 20 MPa
0.6 30
The self lubricating plain bearings made from iglidur® M250 Permissible surface speeds
are defined by their impact strength, vibration dampening, As standard, iglidur® M250 is manufactured as a thick 0.5 25
and wear resistant properties. They excel in applications walled bearing. iglidur® M250 is best suited for low to
Wear [µm/km]
able to absorb dirt, they are also suited for agricultural (linear). In practice, though, this temperature level is rarely 0.2 10
machines and garden appliances. reached due to varying application conditions. 0.1 5
10 temperatures over +60 °C an additional securing is required. loads. These are hardened shafts, such as cold-rolled steel into a nominal size housing, in standard cases the inner
or hard chromed shafts. Diagram 07 makes it clear that diameter automatically adjusts to the D11 tolerances. For
0 Application temperatures, page 49
20 30 40 50 60 70 80 iglidur® M250 is considerably better for rotational than for particular dimensions the tolerance differs depending on
Additional securing, page 49
Temperature [°C] oscillating operation. However, it must be mentioned that the wall thickness (please see product range table). The
Diagram 02: Permissible maximum surface pressure of in oscillating movements, often the vibrations acting on the shaft should have a recommended minimum h9 tolerance.
as a function of temperature (20 MPa at +20 °C) Friction and wear bearing are especially high. Here, iglidur® M250 can utilise
Testing methods, page 57
The coefficient of friction μ of a plain bearing among other its special dampening properties. In our test, these vibra-
iglidur® M250 bearings can withstand radial loads of a factors is influenced by the surface speed and the load tions are excluded so that the comparison between rotation Diameter Shaft iglidur® M250 Housing
maximum 20 MPa. Compared with other iglidur® materials (diagrams 04 and 05). and oscillating operation is captured first. d1 [mm] h9 [mm] D11 [mm] H7 [mm]
iglidur® M250 bearings are highly elastic. A plastic defor- up to 3 0–0.025 +0.020 +0.080 0 +0.010
Coefficients of friction and surfaces, page 47 Shaft materials, page 52
mation is minimal up to the permissible surface pressure. A > 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
Wear resistance, page 50
plastic deformation is minimal up to the permissible surface iglidur M250 ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
pressure. C. o. f. µ 0.18–0.40 0.09 0.04 0.04 > 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
Surface pressure, page 41 Table 04: Coefficient of friction against steel (Ra = 1µm, > 18 to 30 0–0.052 +0.065 +0.195 0 +0.021
50 HRC) > 30 to 50 0–0.062 +0.080 +0.240 0 +0.025
0.7 > 50 to 80 0–0.074 +0.100 +0.290 0 +0.030
4
0.6 6 Table 05: Important tolerances for plain bearings
+23 °C +60 °C
according to ISO 3547-1 after pressfit
Coefficient of friction [µ]
3 5
0.5
HR carbon steel
H.a. aluminium
1 0.3
Wear [µm/km]
304 SS
0 0.2 1
Cf53
0 5 10 15 20 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s] 0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa pressure, p = 1 MPa, v = 0.3 m/s
98 Online tools and more information www.igus.eu/m250 3D-CAD files, prices and delivery time online www.igus.eu/m250 99
MSM iglidur® M250 | Product range iglidur® M250 | Product range MSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
10.0 12.0 10.0 MSM-1012-10 16.0 18.0 20.0 MSM-1618-20
10.0 12.0 12.0 MSM-1012-12 16.0 18.0 25.0 MSM-1618-25
d1
d2
0.5 MSM-1012-15 MSM-1620-20
10.0 12.0 15.0 16.0 20.0 20.0
10.0 12.0 20.0 MSM-1012-20 16.0 20.0 25.0 MSM-1620-25
30°
iglidur® material
10.0 14.0 6.0 MSM-1014-06 16.0 20.0 30.0 MSM-1620-30
b1
10.0 14.0 8.0 MSM-1014-08 16.0 21.0 7.0 MSM-1621-07
Outer-Ø d2
Inner-Ø d1
+0.040
Length b1
10.0 14.0 10.0 MSM-1014-10 16.0 22.0 12.0 MSM-1622-12
+0.130
Form S
Metric
10.0 14.0 16.0 MSM-1014-16 16.0 22.0 15.0 MSM-1622-15
2)
Thickness < 1 mm: chamfer = 20° 10.0 16.0 6.0 MSM-1016-06 16.0 +0.050 22.0 16.0 MSM-1622-16
10.0 16.0 8.0 MSM-1016-08 16.0 +0.160 22.0 20.0 MSM-1622-20
Chamfer in relation to the d1 Dimensions according to DIN 1850 10.0 16.0 10.0 MSM-1016-10 16.0 22.0 25.0 MSM-1622-25
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 10.0 16.0 16.0 MSM-1016-16 18.0 20.0 15.0 MSM-1820-15
f [mm]: 0.3 0.5 0.8 1.2 10.0 16.0 50.0 MSM-1016-50 18.0 20.0 20.0 MSM-1820-20
Imperial dimensions available
From page 1411 12.0 14.0 10.0 MSM-1214-10 18.0 20.0 25.0 MSM-1820-25
Dimensions [mm] 12.0 14.0 12.0 MSM-1214-12 18.0 24.0 12.0 MSM-1824-12
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 12.0 14.0 15.0 MSM-1214-15 18.0 24.0 20.0 MSM-1824-20
Tolerance3) h13 Tolerance3) h13 12.0 14.0 20.0 MSM-1214-20 18.0 24.0 30.0 MSM-1824-30
1.0 3.0 2.0 MSM-0103-02 6.0 10.0 2.5 MSM-0610-02 12.0 16.0 15.0 MSM-1216-15 18.0 24.0 40.0 MSM-1824-40
1.5 4.0 2.0 MSM-0104-02 6.0 10.0 4.0 MSM-0610-04 12.0 16.0 20.0 MSM-1216-20 20.0 23.0 10.0 MSM-2023-10
2.0 5.0 1.0 MSM-0205-01 6.0 10.0 6.0 MSM-0610-06 12.0 18.0 8.0 MSM-1218-08 20.0 23.0 15.0 MSM-2023-15
2.0 5.0 2.0 MSM-0205-02 6.0 +0.030 10.0 8.0 MSM-0610-08 12.0 18.0 10.0 MSM-1218-10 20.0 23.0 20.0 MSM-2023-20
2.0 +0.020 5.0 3.0 MSM-0205-03 6.0 +0.105 10.0 10.0 MSM-0610-10 12.0 18.0 15.0 MSM-1218-15 20.0 23.0 25.0 MSM-2023-25
2.5 +0.080 6.0 3.0 MSM-0206-03 6.0 11.0 4.0 MSM-0611-04 12.0 18.0 20.0 MSM-1218-20 20.0 23.0 30.0 MSM-2023-30
3.0 5.0 3.0 MSM-0305-03 6.0 12.0 6.0 MSM-0612-06 13.0 15.0 10.0 MSM-1315-10 20.0 25.0 14.0 MSM-2025-14
3.0 5.0 4.0 MSM-0305-04 6.0 12.0 10.0 MSM-0612-10 13.0 15.0 20.0 MSM-1315-20 20.0 25.0 20.0 MSM-2025-20
3.0 6.0 3.0 MSM-0306-03 7.0 10.0 5.0 MSM-0710-05 14.0 16.0 8.5 MSM-1416-085 20.0 25.0 30.0 MSM-2025-30
3.0 6.0 4.0 MSM-0306-04 7.0 10.0 8.0 MSM-0710-08 14.0 16.0 10.0 MSM-1416-10 20.0 26.0 12.0 MSM-2026-12
4.0 5.5 4.0 MSM-0405-04 7.0 10.0 10.0 MSM-0710-10 14.0 16.0 15.0 MSM-1416-15 20.0 26.0 15.0 MSM-2026-15
4.0 5.5 6.0 MSM-0405-06 7.0 11.0 16.0 MSM-0711-16 14.0 +0.050 16.0 20.0 MSM-1416-20 20.0 26.0 20.0 MSM-2026-20
4.0 7.0 3.0 MSM-0407-03 8.0 10.0 6.0 MSM-0810-06 14.0 +0.160 16.0 25.0 MSM-1416-25 20.0 26.0 30.0 MSM-2026-30
4.0 7.0 4.0 MSM-0407-04 8.0 10.0 8.0 MSM-0810-08 14.0 16.0 29.0 MSM-1416-29 22.0 24.0 8.0 MSM-2224-08
+0.065
4.0 7.0 6.0 MSM-0407-06 8.0 10.0 10.0 MSM-0810-10 14.0 18.0 20.0 MSM-1418-20 22.0 25.0 15.0 MSM-2225-15
+0.195
4.0 8.0 4.0 MSM-0408-04 8.0 10.0 12.0 MSM-0810-12 14.0 20.0 10.0 MSM-1420-10 22.0 25.0 20.0 MSM-2225-20
4.0 8.0 6.0 MSM-0408-06 8.0 11.0 6.0 MSM-0811-06 14.0 20.0 15.0 MSM-1420-15 22.0 25.0 25.0 MSM-2225-25
5.0 7.0 5.0 MSM-0507-05 8.0 +0.040 11.0 8.0 MSM-0811-08 14.0 20.0 20.0 MSM-1420-20 22.0 25.0 30.0 MSM-2225-30
5.0 +0.030 7.0 10.0 MSM-0507-10 8.0 +0.130 11.0 12.0 MSM-0811-12 15.0 17.0 10.0 MSM-1517-10 22.0 26.0 15.0 MSM-2226-15
5.0 +0.105 8.0 4.0 MSM-0508-04 8.0 12.0 4.0 MSM-0812-04 15.0 17.0 15.0 MSM-1517-15 22.0 28.0 10.0 MSM-2228-10
5.0 8.0 5.0 MSM-0508-05 8.0 12.0 6.0 MSM-0812-06 15.0 17.0 20.0 MSM-1517-20 22.0 28.0 15.0 MSM-2228-15
5.0 8.0 8.0 MSM-0508-08 8.0 12.0 8.0 MSM-0812-08 15.0 17.0 25.0 MSM-1517-25 22.0 28.0 20.0 MSM-2228-20
5.0 9.0 5.0 MSM-0509-05 8.0 12.0 10.0 MSM-0812-10 15.0 21.0 10.0 MSM-1521-10 22.0 28.0 30.0 MSM-2228-30
5.0 9.0 8.0 MSM-0509-08 8.0 12.0 12.0 MSM-0812-12 15.0 21.0 15.0 MSM-1521-15 24.0 27.0 15.0 MSM-2427-15
6.0 8.0 6.0 MSM-0608-06 8.0 14.0 6.0 MSM-0814-06 15.0 21.0 20.0 MSM-1521-20 24.0 27.0 20.0 MSM-2427-20
6.0 8.0 8.0 MSM-0608-08 8.0 14.0 10.0 MSM-0814-10 15.0 21.0 23.0 MSM-1521-23 24.0 27.0 25.0 MSM-2427-25
6.0 8.0 10.0 MSM-0608-10 9.0 12.0 14.0 MSM-0912-14 16.0 18.0 12.0 MSM-1618-12 24.0 27.0 30.0 MSM-2427-30
6.0 9.0 6.0 MSM-0609-06 10.0 12.0 8.0 MSM-1012-08 16.0 18.0 15.0 MSM-1618-15 24.0 30.0 15.0 MSM-2430-15
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
100 Online tools and more information www.igus.eu/m250 3D-CAD files, prices and delivery time online www.igus.eu/m250 101
MSM iglidur® M250 | Product range iglidur® M250 | Product range MFM
30
m
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. r
°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
24.0 30.0 20.0 MSM-2430-20 +0.065
30.0 38.0 4.5 MSM-3038-045
24.0 30.0 30.0 MSM-2430-30 +0.195
d2
d3
d1
25.0 28.0 12.0 MSM-2528-12 +0.080
30.0 38.0 17.0 MSM-3038-17
25.0 28.0 15.0 MSM-2528-15 +0.240
iglidur® material
25.0 28.0 20.0 MSM-2528-20 30.0 38.0 20.0 MSM-3038-20
b2
25.0 28.0 25.0 MSM-2528-25 30.0 +0.065 38.0 30.0 MSM-3038-30
Outer-Ø d2
Inner-Ø d1
Length b1
25.0 28.0 30.0 MSM-2528-30 30.0 +0.195 38.0 40.0 MSM-3038-40 b1
Form F
Metric
25.0 30.0 20.0 MSM-2530-20 30.0 40.0 40.0 MSM-3040-40
25.0 30.0 30.0 MSM-2530-30 32.0 40.0 20.0 MSM-3236-20
2)
Thickness < 1 mm: chamfer = 20°
25.0 30.0 40.0 MSM-2530-40 32.0 40.0 20.0 MSM-3236-30
25.0 32.0 10.0 MSM-2532-10 32.0 40.0 20.0 MSM-3236-40 Chamfer in relation to the d1 Dimensions according to DIN 1850
25.0 32.0 12.0 MSM-2532-12 32.0 40.0 20.0 MSM-3240-20 d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
25.0 32.0 20.0 MSM-2532-20 32.0 40.0 30.0 MSM-3240-30 f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
25.0 32.0 30.0 MSM-2532-30 32.0 40.0 40.0 MSM-3240-40 From page 1435
25.0 32.0 35.0 MSM-2532-35 35.0 39.0 20.0 MSM-3539-20 Dimensions [mm]
25.0 32.0 40.0 MSM-2532-40 35.0 39.0 30.0 MSM-3539-30 d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
26.0 +0.065 30.0 20.0 MSM-2630-20 35.0 39.0 40.0 MSM-3539-40 Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
26.0 +0.195 32.0 30.0 MSM-2632-30 35.0 39.0 50.0 MSM-3539-50 1.0 3.0 5.0 2.0 1.0 MFM-0103-02 8.0 12.0 16.0 8.0 2.0 MFM-0812-08
27.0 34.0 20.0 MSM-2734-20 35.0 42.0 50.0 MSM-3542-50 1.5 4.0 6.0 2.0 1.0 MFM-0104-02 8.0 12.0 16.0 12.0 2.0 MFM-0812-12
+0.020
27.0 34.0 30.0 MSM-2734-30 40.0 44.0 20.0 MSM-4044-20 2.0 5.0 8.0 3.0 1.5 MFM-0205-03 8.0 14.0 18.0 6.0 3.0 MFM-0814-06
+0.080 +0.080
27.0 34.0 40.0 MSM-2734-40 40.0 44.0 30.0 MSM-4044-30 2.5 6.0 9.0 3.0 1.5 MFM-0206-03 8.0 14.0 18.0 10.0 3.0 MFM-0814-10
+0.240
28.0 32.0 20.0 MSM-2832-20 40.0 44.0 40.0 MSM-4044-40 3.0 6.0 9.0 4.0 1.5 MFM-0306-04 8.0 14.0 16.0 6.0 3.0 MFM-081416-06
28.0 32.0 25.0 MSM-2832-25 40.0 44.0 50.0 MSM-4044-50 4.0 8.0 12.0 4.0 2.0 MFM-0408-04 8.0 14.0 16.0 10.0 3.0 MFM-081416-10
28.0 32.0 30.0 MSM-2832-30 40.0 46.0 20.0 MSM-4046-20 4.0 8.0 12.0 6.0 2.0 MFM-0408-06 9.0 14.0 19.0 6.0 2.0 MFM-0914-06
28.0 33.0 20.0 MSM-2833-20 45.0 50.0 20.0 MSM-4550-20 4.0 8.0 12.0 8.0 2.0 MFM-0408-08 9.0 14.0 19.0 10.0 2.0 MFM-0914-10
28.0 36.0 20.0 MSM-2836-20 45.0 50.0 30.0 MSM-4550-30 5.0 9.0 13.0 5.0 2.0 MFM-0509-05 9.0 14.0 19.0 14.0 2.0 MFM-0914-14
28.0 36.0 30.0 MSM-2836-30 45.0 50.0 40.0 MSM-4550-40 5.0 9.0 13.0 6.0 2.0 MFM-0509-06 10.0 12.0 18.0 7.0 1.0 MFM-1012-07
28.0 36.0 40.0 MSM-2836-40 45.0 50.0 50.0 MSM-4550-50 5.0 9.0 13.0 8.0 2.0 MFM-0509-08 10.0 12.0 18.0 9.0 1.0 MFM-1012-09
30.0 34.0 20.0 MSM-3034-20 50.0 55.0 20.0 MSM-5055-20 6.0 +0.030 8.0 12.0 4.0 1.0 MFM-0608-04 10.0 12.0 18.0 12.0 1.0 MFM-1012-12
30.0 34.0 25.0 MSM-3034-25 50.0 55.0 30.0 MSM-5055-30 6.0 +0.105 8.0 12.0 8.0 1.0 MFM-0608-08 10.0 12.0 18.0 17.0 1.0 MFM-1012-17
+0.040
30.0 34.0 30.0 MSM-3034-30 50.0 55.0 40.0 MSM-5055-40 6.0 10.0 14.0 4.0 2.0 MFM-0610-04 10.0 14.0 19.0 9.0 2.0 MFM-1014-09
+0.130
30.0 34.0 40.0 MSM-3034-40 50.0 55.0 50.0 MSM-5055-50 6.0 10.0 14.0 6.0 2.0 MFM-0610-06 10.0 14.0 19.0 10.0 2.0 MFM-1014-10
30.0 35.0 20.0 MSM-3035-20 50.0 55.0 60.0 MSM-5055-60 6.0 10.0 14.0 10.0 2.0 MFM-0610-10 10.0 14.0 17.5 14.0 1.0 MFM-1014-14
30.0 35.0 40.0 MSM-3035-40 +0.100 6.0 11.0 14.0 4.0 2.0 MFM-0611-04 10.0 14.0 17.5 19.0 1.0 MFM-1014-19
75.0 80.0 60.0 MSM-7580-60
+0.032 +0.290 6.0 12.0 14.0 6.0 3.0 MFM-0612-06 10.0 14.0 17.5 24.0 1.0 MFM-1014-24
30.0 38.0 3.0 MSM-3038-03
+0.102 6.0 12.0 14.0 10.0 3.0 MFM-0612-10 10.0 14.0 17.5 34.0 1.0 MFM-1014-34
3)
After press-fit. Testing methods Page 57 7.0 11.0 15.0 6.0 2.0 MFM-0711-06 10.0 14.0 19.0 8.0 2.0 MFM-101419-08
7.0 11.0 15.0 8.0 2.0 MFM-0711-08 10.0 14.0 19.0 12.0 1.5 MFM-101419-12
8.0 9.0 13.0 5.5 0.5 MFM-0809-055 10.0 14.0 20.0 12.0 2.0 MFM-101420-12
Couldn't find your size? 8.0 10.0 15.0 5.5 1.0 MFM-0810-05 10.0 16.0 22.0 8.0 3.0 MFM-1016-08
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your +0.040
8.0 10.0 15.0 7.5 1.0 MFM-0810-07 10.0 16.0 22.0 10.0 3.0 MFM-1016-10
application? Please call us. igus® listens to your needs and provides you a solution very quickly. +0.130
8.0 10.0 15.0 9.5 1.0 MFM-0810-09 10.0 16.0 22.0 16.0 3.0 MFM-1016-16
8.0 11.0 13.0 5.0 2.0 MFM-0811-05 10.0 16.0 20.0 6.0 3.0 MFM-101620-06
Even more dimensions from stock 8.0 11.0 13.0 8.0 2.0 MFM-0811-08 10.0 16.0 20.0 10.0 3.0 MFM-101620-10
More than 300 dimensions are now available. Search online for your required bearing. 8.0 12.0 16.0 6.0 2.0 MFM-0812-06
www.igus.eu/iglidur-specialbearings 3)
After press-fit. Testing methods Page 57
102 Online tools and more information www.igus.eu/m250 3D-CAD files, prices and delivery time online www.igus.eu/m250 103
MFM iglidur® M250 | Product range
Flange bearing (Form F)
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1 - d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
12.0 14.0 20.0 7.0 1.0 MFM-1214-07 19.0 24.0 27.0 12.0 2.0 MFM-192427-12
12.0 14.0 20.0 9.0 1.0 MFM-1214-09 20.0 23.0 30.0 11.5 1.5 MFM-2023-11
12.0 14.0 20.0 12.0 1.0 MFM-1214-12 20.0 23.0 30.0 16.5 1.5 MFM-2023-16
12.0 14.0 20.0 17.0 1.0 MFM-1214-17 20.0 23.0 30.0 21.5 1.5 MFM-2023-21
12.0 16.0 22.0 10.0 2.0 MFM-1216-10 20.0 26.0 32.0 15.0 3.0 MFM-2026-15
12.0 16.0 22.0 20.0 2.0 MFM-1216-20 20.0 26.0 32.0 20.0 3.0 MFM-2026-20
12.0 18.0 24.0 8.0 3.0 MFM-1218-08 20.0 26.0 28.0 12.0 3.0 MFM-202628-12
12.0 18.0 22.0 10.0 3.0 MFM-1218-10 20.0 26.0 32.0 30.0 3.0 MFM-2026-30
12.0 18.0 24.0 12.0 3.0 MFM-1218-12 22.0 28.0 34.0 15.0 3.0 MFM-2228-15
12.0 18.0 22.0 15.0 3.0 MFM-1218-15 22.0 28.0 34.0 20.0 3.0 MFM-2228-20
12.0 18.0 22.0 20.0 3.0 MFM-1218-20 22.0 28.0 34.0 30.0 3.0 MFM-2228-30
13.0 15.0 20.0 14.0 2.0 MFM-1315-14 24.0 30.0 36.0 15.0 3.0 MFM-2430-15
13.0 16.0 24.0 8.0 2.0 MFM-131624-08 24.0 30.0 36.0 20.0 3.0 MFM-2430-20
14.0 16.0 22.0 12.0 1.0 MFM-1416-12 24.0 30.0 36.0 30.0 3.0 MFM-2430-30
14.0 16.0 22.0 17.0 1.0 MFM-1416-17 25.0 28.0 35.0 11.5 1.5 MFM-2528-11
14.0 20.0 25.0 7.0 3.0 MFM-1420-07 25.0 28.0 35.0 16.5 1.5 MFM-2528-16
14.0 20.0 25.0 10.0 3.0 MFM-1420-10 25.0 +0.065 28.0 35.0 21.5 1.5 MFM-2528-21
14.0 20.0 25.0 15.0 3.0 MFM-1420-15 25.0 +0.195 32.0 38.0 12.0 4.0 MFM-2532-12
14.0 20.0 25.0 20.0 3.0 MFM-1420-20 25.0 32.0 38.0 15.0 4.0 MFM-2532-15
15.0 17.0 23.0 9.0 1.0 MFM-1517-09 25.0 32.0 38.0 20.0 4.0 MFM-2532-20
15.0 +0.050 17.0 23.0 12.0 1.0 MFM-1517-12 25.0 32.0 38.0 30.0 4.0 MFM-2532-30
15.0 +0.160 17.0 23.0 17.0 1.0 MFM-1517-17 25.0 32.0 38.0 40.0 4.0 MFM-2532-40
15.0 21.0 27.0 10.0 3.0 MFM-1521-10 27.0 34.0 40.0 20.0 4.0 MFM-2734-20
15.0 21.0 27.0 15.0 3.0 MFM-1521-15 27.0 34.0 40.0 30.0 4.0 MFM-2734-30
15.0 21.0 27.0 20.0 3.0 MFM-1521-20 27.0 34.0 40.0 40.0 4.0 MFM-2734-40
16.0 22.0 28.0 15.0 3.0 MFM-1622-15 30.0 35.0 44.0 20.0 4.0 MFM-3035-20
16.0 22.0 28.0 20.0 3.0 MFM-1622-20 30.0 38.0 44.0 20.0 4.0 MFM-3038-20
16.0 22.0 28.0 25.0 3.0 MFM-1622-25 30.0 38.0 44.0 30.0 4.0 MFM-3038-30 Low moisture absorption
18.0 20.0 26.0 12.0 1.0 MFM-1820-12 30.0 38.0 44.0 40.0 4.0 MFM-3038-40
18.0 20.0 26.0 17.0 1.0 MFM-1820-17 32.0 40.0 46.0 20.0 4.0 MFM-3240-20 Extremely wear resistant especially up to 20 MPa
18.0 20.0 26.0 22.0 1.0 MFM-1820-22 32.0 40.0 46.0 30.0 4.0 MFM-3240-30 in pivoting applications
18.0 24.0 30.0 8.0 3.0 MFM-1824-08 32.0 40.0 46.0 40.0 4.0 MFM-3240-40
18.0 24.0 30.0 12.0 3.0 MFM-1824-12 35.0 +0.080 39.0 47.0 16.0 2.0 MFM-3539-16 Versatile: performance on many different shafts
18.0 24.0 30.0 18.0 3.0 MFM-1824-18 35.0 +0.240 39.0 47.0 26.0 2.0 MFM-3539-26
18.0 24.0 30.0 20.0 3.0 MFM-1824-20 40.0 44.0 52.0 30.0 2.0 MFM-4044-30 Good with edge loads
18.0 24.0 30.0 30.0 3.0 MFM-1824-30 40.0 44.0 52.0 40.0 2.0 MFM-4044-40
18.0 24.0 26.0 7.8 3.0 MFM-182426-078 45.0 50.0 58.0 50.0 2.0 MFM-4550-50 Lubrication and maintenance-free
3)
After press-fit. Testing methods Page 57
Standard range from stock
Load [MPa]
●● When temperatures in excess of +100 °C
iglidur® P210 bearings have a good resistance to UV
occur
radiation.
iglidur® G, page 79 0.1
Available from stock
iglidur® J350, page 173 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Surface speed [m/s] Medium Resistance
Diagram 01: Permissible pv values for iglidur® P210 Alcohol +
Typical application areas
Block pricing online bearings with a wall thickness of 1 mm dry running against Hydrocarbons –
●● Agricultural machines
No minimum order value. From batch size 1. a steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Furniture/Industrial design
●● Textile industry Fuels +
Max. +100 °C Moisture absorption Diluted acids 0
●● Doors and gates
Min. –40 °C The humidity absorption of iglidur® P210 bearings amounts Strong acids –
●● Machine building
to about 0.3 % weight in standard climatic conditions. The Diluted alkalines –
Ø 4–50 mm saturation limit in water is 0.5 % weight. This low moisture Strong alkalines –
More dimensions upon request absorption is well below the values of iglidur® G.
+ resistant 0 conditionally resistant – not resistant
Diagram, www.igus.eu/p210-moisture All data given at room temperature [+20 °C]
Imperial dimensions available
Table 02: Chemical resistance
From page 1391 Vacuum
In a vacuum environment, any existing moisture in iglidur® P210 Chemical table, page 1478
Online product finder plain bearings is released as a vapour. Use in vacuum is
www.igus.eu/iglidur-finder limited.
106 Online tools and more information www.igus.eu/p210 3D-CAD files, prices and delivery time online www.igus.eu/p210 107
P210 P210
+100 °C iglidur P210 | Technical data
®
iglidur P210 | Technical data ® +100 °C
50 MPa 50 MPa
0.30 120
iglidur® P210 plain bearings provide the user with versatile Permissible surface speeds
all-round bearings, which have proven to have above Plain bearings made from iglidur® P210 are maintenance- 0.25 100
rotating oscillating
average service life, primarily in pivoting applications at free plain bearings, which were developed for low to average
Wear [µm/km]
Mechanical properties maximum speed given is the speed at which an increase up 0.10 40
With increasing temperatures, the compressive strength to the continuous use temperature occurs due to friction. 0.05 20
of iglidur® P210 plain bearings decreases. The diagram 02
0.00 0
shows this inverse relationship. The recommended maxi Surface speed, page 44 0 10 20 30 40 50 0 5 10 15 20 25 30 35 40 45
mum surface pressure is a mechanical material parameter. Load [MPa] Load [MPa]
No conclusions regarding the tribological properties can be m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Continuous 1 0.7 3 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Short-term 2 1.4 4 steel, as a function of the pressure
60
Table 03: Maximum surface speeds
50 Shaft materials Installation tolerances
40 Temperatures Diagram 06 shows results of testing different shaft materials iglidur® P210 plain bearings are standard bearings for
With its highest long-term application temperature of with plain bearings made from iglidur® P210. shafts with h-tolerance (recommended minimum h9). The
30
+100 °C, iglidur® P210 is suitable for a large application For rotating motions at radial loads below 1 MPa, iglidur® P210 bearings are designed for pressfit into a housing machined
20 spectrum. If higher temperatures are required, iglidur® G has generally very low wear. Wear is only significantly higher to a H7 tolerance. After being assembled into a nominal
Load [MPa]
10 with a max. long-term temperature of +130 °C can be in combination with HR carbon steel shafts. Generally, size housing, the inner diameter automatically adjusts to
used. The temperatures prevailing in the bearing system rotational wear will be higher than for a pivoting application the E10 tolerances. For particular dimensions the tolerance
0
20 30 40 50 60 70 80 90 100 also have an influence on the bearing wear. The wear rises of equal load. This is only reversed at loads above 25 MPa differs depending on the wall thickness (please see product
Temperature [°C] with increasing temperatures. At temperatures over +50 °C (diagram 07). range table).
Diagram 02: Permissible maximum surface pressure of an additional securing is required.
as a function of temperature (50 MPa at +20 °C) Shaft materials, page 52 Testing methods, page 57
Application temperatures, page 49
Diagram 03 shows the elastic deformation of iglidur P210 ®
Additional securing, page 49 iglidur® P210 Dry Greases Oil Water Diameter Shaft iglidur® P210 Housing
as a function of radial pressure. At the permissible maximum C. o. f. µ 0.07 – 0.19 0.09 0.04 0.04 d1 [mm] h9 [mm] E10 [mm] H7 [mm]
surface pressure of 50 MPa the deformation at room tem Friction and wear up to 3 0–0.025 +0.014 +0.054 0 +0.010
Table 04: Coefficient of friction against steel (Ra = 1µm,
perature is less than 3 %. Similar to wear resistance, the coefficient of friction also > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
50 HRC)
changes with the load (diagrams 04 and 05). > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Surface pressure, page 41 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
5
Coefficients of friction and surfaces, page 47 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Wear resistance, page 50 4 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
H.a. aluminium
0.35 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
+23 °C +60 °C 2
Wear [µm/km]
8
0.30
7 Table 05: Important tolerances for plain bearings
Coefficient of friction [µ]
304 SS
0.25 1
6
Cf53
according to ISO 3547-1 after pressfit
5 0.20
Deformation [%]
0
4 0.15
3 Diagram 06: Wear, rotating with different shaft materials,
0.10
2 p = 1 MPa, v = 0.3 m/s
1 0.05
0 0.00
0 25 50 75 0.10 0.15 0.20 0.25 0.30 0.35 0.40
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1 MPa
108 Online tools and more information www.igus.eu/p210 3D-CAD files, prices and delivery time online www.igus.eu/p210 109
P210SM iglidur® P210 | Product range iglidur® P210 | Product range P210SM
30°
d1- d1-
Tolerance 3) h13 Tolerance 3) h13
Type Dimensions [mm]
28.0 32.0 30.0 P210SM-2832-30 40.0 44.0 30.0 P210SM-4044-30
30.0 34.0 20.0 P210SM-3034-20 40.0 44.0 40.0 P210SM-4044-40
d1
d2
0.5 +0.040
30.0 34.0 25.0 P210SM-3034-25 40.0 44.0 50.0 P210SM-4044-50
+0.124
30.0 34.0 30.0 P210SM-3034-30 45.0 50.0 20.0 P210SM-4550-20
30°
iglidur® material
30.0 34.0 40.0 P210SM-3034-40 45.0 50.0 30.0 P210SM-4550-30
b1
32.0 36.0 20.0 P210SM-3236-20 45.0 +0.050 50.0 40.0 P210SM-4550-40
Outer-Ø d2
Inner-Ø d1
Length b1
32.0 36.0 30.0 P210SM-3236-30 45.0 +0.150 50.0 50.0 P210SM-4550-50
Form S
Metric
32.0 36.0 40.0 P210SM-3236-40 50.0 55.0 20.0 P210SM-5055-20
2)
Thickness < 1 mm: chamfer = 20° 35.0 +0.050 39.0 20.0 P210SM-3539-20 50.0 55.0 30.0 P210SM-5055-30
35.0 +0.150 39.0 30.0 P210SM-3539-30 50.0 55.0 40.0 P210SM-5055-40
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 35.0 39.0 40.0 P210SM-3539-40 50.0 55.0 50.0 P210SM-5055-50
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 35.0 39.0 50.0 P210SM-3539-50 50.0 55.0 60.0 P210SM-5055-60
f [mm]: 0.3 0.5 0.8 1.2 40.0 44.0 20.0 P210SM-4044-20
Imperial dimensions available
From page 1415 3)
After press-fit. Testing methods Page 57
Dimensions [mm]
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No.
Tolerance 3) h13 Tolerance 3) h13
4.0 5.5 4.0 P210SM-0405-04 15.0 17.0 25.0 P210SM-1517-25
4.0 5.5 6.0 P210SM-0405-06 16.0 18.0 15.0 P210SM-1618-15
5.0 7.0 5.0 P210SM-0507-05 16.0 18.0 20.0 P210SM-1618-20
+0.020 +0.032
5.0 7.0 10.0 P210SM-0507-10 16.0 18.0 25.0 P210SM-1618-25
+0.068 +0.102
6.0 8.0 6.0 P210SM-0608-06 18.0 20.0 15.0 P210SM-1820-15
6.0 8.0 8.0 P210SM-0608-08 18.0 20.0 20.0 P210SM-1820-20
6.0 8.0 10.0 P210SM-0608-10 18.0 20.0 25.0 P210SM-1820-25
8.0 10.0 8.0 P210SM-0810-08 20.0 23.0 10.0 P210SM-2023-10
8.0 10.0 10.0 P210SM-0810-10 20.0 23.0 15.0 P210SM-2023-15
8.0 10.0 12.0 P210SM-0810-12 20.0 23.0 20.0 P210SM-2023-20
10.0 +0.025 12.0 8.0 P210SM-1012-08 20.0 23.0 25.0 P210SM-2023-25
10.0 +0.083 12.0 10.0 P210SM-1012-10 20.0 23.0 30.0 P210SM-2023-30
10.0 12.0 12.0 P210SM-1012-12 22.0 25.0 15.0 P210SM-2225-15
10.0 12.0 15.0 P210SM-1012-15 22.0 25.0 20.0 P210SM-2225-20
10.0 12.0 20.0 P210SM-1012-20 22.0 25.0 25.0 P210SM-2225-25
12.0 14.0 10.0 P210SM-1214-10 22.0 25.0 30.0 P210SM-2225-30
+0.040
12.0 14.0 12.0 P210SM-1214-12 24.0 27.0 15.0 P210SM-2427-15
+0.124
12.0 14.0 15.0 P210SM-1214-15 24.0 27.0 20.0 P210SM-2427-20
12.0 14.0 20.0 P210SM-1214-20 24.0 27.0 25.0 P210SM-2427-25
13.0 15.0 10.0 P210SM-1315-10 24.0 27.0 30.0 P210SM-2427-30
+0.032
13.0 15.0 20.0 P210SM-1315-20 25.0 28.0 15.0 P210SM-2528-15 Couldn't find your size?
+0.102
14.0 16.0 15.0 P210SM-1416-15 25.0 28.0 20.0 P210SM-2528-20 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
14.0 16.0 20.0 P210SM-1416-20 25.0 28.0 25.0 P210SM-2528-25 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
14.0 16.0 25.0 P210SM-1416-25 25.0 28.0 30.0 P210SM-2528-30
15.0 17.0 15.0 P210SM-1517-15 28.0 32.0 20.0 P210SM-2832-20 Even more dimensions from stock
15.0 17.0 20.0 P210SM-1517-20 28.0 32.0 25.0 P210SM-2832-25 More than 300 dimensions are now available. Search online for your required bearing.
3)
After press-fit. Testing methods Page 57 www.igus.eu/iglidur-specialbearings
110 Online tools and more information www.igus.eu/p210 3D-CAD files, prices and delivery time online www.igus.eu/p210 111
P210FM iglidur® P210 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
12.0 14.0 20.0 7.0 1.0 P210FM-1214-07 30.0 34.0 42.0 16.0 2.0 P210FM-3034-16
+0.124
12.0 14.0 20.0 9.0 1.0 P210FM-1214-09 30.0 34.0 42.0 26.0 2.0 P210FM-3034-26
12.0 14.0 20.0 12.0 1.0 P210FM-1214-12 35.0 39.0 47.0 16.0 2.0 P210FM-3539-16 Low water absorption
+0.032
12.0 14.0 20.0 17.0 1.0 P210FM-1214-17 35.0 39.0 47.0 26.0 2.0 P210FM-3539-26
14.0
+0.102
16.0 22.0 12.0 1.0 P210FM-1416-12 40.0 44.0 52.0 30.0 2.0 P210FM-4044-30 Low wear rates
14.0 16.0 22.0 17.0 1.0 P210FM-1416-17 40.0 44.0 52.0 40.0 2.0 P210FM-4044-40
15.0 17.0 23.0 9.0 1.0 P210FM-1517-09 45.0 50.0 58.0 50.0 2.0 P210FM-4550-50 High load capacity
3)
After press-fit. Testing methods Page 57
Cost-effective
Couldn't find your size?
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
Lubrication and maintenance-free
application? Please call us. igus® listens to your needs and provides you a solution very quickly.
Standard range from stock
Even more dimensions from stock
More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
Load [MPa]
●● Solar technology
iglidur® P bearings have a good resistance to UV radiation.
●● Sports and leisure
●● Machine building 0.1
Available from stock Medium Resistance
●● Doors and gates 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Surface speed [m/s] Alcohol +
●● Railway technology
Diagram 01: Permissible pv values for iglidur® P bearings Hydrocarbons –
Block pricing online with a wall thickness of 1 mm dry running against a Greases, oils without additives +
No minimum order value. From batch size 1. steel shaft, at +20 °C, mounted in a steel housing Fuels +
Diluted acids 0
Max. +130 °C Strong acids –
Moisture absorption
Min. –40 °C Diluted alkalines –
The moisture absorption of iglidur® P plain bearings is
approximately 0.2 % weight in standard climatic conditions. Strong alkalines –
Ø 3–95 mm
The saturation limit in water is 0.4 % weight. This low + resistant 0 conditionally resistant – not resistant
More dimensions upon request
moisture absorption is well below the values of iglidur® G. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Imperial dimensions available Diagram, www.igus.eu/p-moisture
From page 1391
Vacuum Chemical table, page 1478
The existent humidity of iglidur® P bearings degasses in
Online product finder
the vacuum. Use in vacuum can be limited. Use in vacuum
www.igus.eu/iglidur-finder
can be limited.
114 Online tools and more information www.igus.eu/p 3D-CAD files, prices and delivery time online www.igus.eu/p 115
P P
+130 °C iglidur P | Technical data
®
iglidur P | Technical data ® +130 °C
50 MPa 50 MPa
0.25 180
With the iglidur® P plain bearing, the user has a cost- Permissible surface speeds 160
effective, maintenance-free plain bearing. Compared to Plain bearings made from iglidur® P are maintenance-free 0.20 140 rotating oscillating
iglidur® G, plain bearings made from iglidur® P are suitable plain bearings, which were developed for low to average
Wear [µm/km]
Mechanical properties maximum speed given is the speed at which an increase up 60
40
With increasing temperatures, the compressive strength of to the continuous use temperature occurs due to friction. 0.05
20
iglidur® P plain bearings decreases. The diagram 02 shows
Surface speed, page 44 0.00 0
this inverse relationship. The recommended maximum 0 5 10 15 20 25 30 35 0 10 20 30 40 50
surface pressure is a mechanical material parameter. No m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be Continuous 1 0.7 3 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Short-term 2 1.4 4 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
steel, as a function of the pressure
Table 03: Maximum surface speeds
60
10 temperatures. At temperatures over +90 °C an additional On the other hand, the bearings on 304 stainless steel housing, the inner diameter automatically adjusts to the E10
securing is required. shafts as well as hard-chromed shafts result in higher wear tolerances. For particular dimensions the tolerance differs
0
20 30 40 50 60 70 80 90 100 110 120 130 than other shaft materials even in the low load range. For depending on the wall thickness (please see product range
Application temperatures, page 49
Temperature [°C] example at a load of 2 MPa, cold rolled steel is six times table).
Additional securing, page 49
Diagram 02: Permissible maximum surface pressure of better than 304 stainless steel. For oscillating movements,
as a function of temperature (50 MPa at +20 °C) however, is the "soft" HR carbon steel shaft significantly Testing methods, page 57
Friction and wear
less favourable than the hardened shaft versions or the 304
Just as the wear resistance, the coefficient of friction changes
stainless steel shafts. Diameter Shaft iglidur® P Housing
Diagram 03 shows the elastic deformation of iglidur P as ®
greatly with increasing load (diagrams 04 and 05). iglidur® P
a function of radial pressure. At the permissible maximum plain bearings obtain a minimum coefficient of friction d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
surface pressure of 50 MPa the deformation is less than 4 %. on shafts with a roughness Ra from 0.1 to 0.2 μm. Both
smoother and rougher shaft surface finish cause the friction > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Surface pressure, page 41 to clearly increase. iglidur P ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
C. o. f. µ 0.06 – 0.21 0.09 0.04 0.04 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
Coefficients of friction and surfaces, page 47 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Table 04: Coefficient of friction against steel (Ra = 1µm,
Wear resistance, page 50 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
50 HRC)
> 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
> 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
10 0.4 18 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
9 16
8 +23 °C +60 °C
14
Table 05: Important tolerances for plain bearings
7 according to ISO 3547-1 after pressfit
0.3 12
HR carbon steel
8 H.a. aluminium
Deformation [%]
4
Wear [µm/km]
0.2 6
3
4
304 SS
2
Cf53
1 2
0 0.1 0
0 5 10 15 20 25 30 35 40 45 50 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
116 Online tools and more information www.igus.eu/p 3D-CAD files, prices and delivery time online www.igus.eu/p 117
PSM iglidur® P | Product range iglidur® P | Product range PSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
23.0 25.0 58.0 PSM-2325-58 35.0 39.0 30.0 PSM-3539-30
23.0 25.0 68.0 PSM-2325-68 35.0 39.0 40.0 PSM-3539-40
d1
d2
0.5 PSM-2427-15 PSM-3539-50
24.0 27.0 15.0 35.0 39.0 50.0
24.0 27.0 20.0 PSM-2427-20 40.0 44.0 20.0 PSM-4044-20
30°
iglidur® material
24.0 27.0 25.0 PSM-2427-25 40.0 44.0 30.0 PSM-4044-30
b1
24.0 27.0 30.0 PSM-2427-30 40.0 44.0 40.0 PSM-4044-40
Outer-Ø d2
Inner-Ø d1
Length b1
25.0 28.0 15.0 PSM-2528-15 40.0 44.0 50.0 PSM-4044-50
Form S
Metric
25.0 28.0 20.0 PSM-2528-20 40.0 44.0 58.0 PSM-4044-58
2)
Thickness < 1 mm: chamfer = 20° +0.050
25.0 28.0 25.0 PSM-2528-25 45.0 50.0 20.0 PSM-4550-20
+0.150
25.0 +0.040 28.0 30.0 PSM-2528-30 45.0 50.0 30.0 PSM-4550-30
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 25.0 +0.124 28.0 35.0 PSM-2528-35 45.0 50.0 40.0 PSM-4550-40
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 26.0 30.0 25.0 PSM-2630-25 45.0 50.0 50.0 PSM-4550-50
f [mm]: 0.3 0.5 0.8 1.2 28.0 32.0 20.0 PSM-2832-20 50.0 55.0 20.0 PSM-5055-20
Imperial dimensions available
From page 1414 28.0 32.0 25.0 PSM-2832-25 50.0 55.0 30.0 PSM-5055-30
Dimensions [mm] 28.0 32.0 30.0 PSM-2832-30 50.0 55.0 40.0 PSM-5055-40
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 30.0 34.0 20.0 PSM-3034-20 50.0 55.0 50.0 PSM-5055-50
Tolerance3) h13 Tolerance3) h13 30.0 34.0 25.0 PSM-3034-25 50.0 55.0 60.0 PSM-5055-60
+0.014 15.0 17.0 15.0 PSM-1517-15 30.0 34.0 30.0 PSM-3034-30 60.0 65.0 50.0 PSM-6065-50
3.0 4.5 3.0 PSM-0304-03
+0.054 15.0 17.0 20.0 PSM-1517-20 30.0 34.0 40.0 PSM-3034-40 60.0 +0.060 65.0 60.0 PSM-6065-60
4.0 5.5 4.0 PSM-0405-04 15.0 17.0 25.0 PSM-1517-25 30.0 34.0 45.0 PSM-3034-45 65.0 +0.180 70.0 50.0 PSM-6570-50
4.0 5.5 6.0 PSM-0405-06 16.0 18.0 15.0 PSM-1618-15 32.0 36.0 20.0 PSM-3236-20 75.0 80.0 80.0 PSM-7580-80
5.0 7.0 5.0 PSM-0507-05 16.0 18.0 20.0 PSM-1618-20 32.0 +0.050 36.0 30.0 PSM-3236-30 90.0 +0.072 95.0 100.0 PSM-9095-100
+0.020 +0.032
5.0 7.0 10.0 PSM-0507-10 16.0 18.0 25.0 PSM-1618-25 32.0 +0.150 36.0 40.0 PSM-3236-40 95.0 +0.212 100.0 100.0 PSM-95100-100
+0.068 +0.102
6.0 8.0 6.0 PSM-0608-06 16.0 18.0 42.0 PSM-1618-42 35.0 39.0 20.0 PSM-3539-20
6.0 8.0 8.0 PSM-0608-08 18.0 20.0 15.0 PSM-1820-15 3)
After press-fit. Testing methods Page 57
6.0 8.0 10.0 PSM-0608-10 18.0 20.0 20.0 PSM-1820-20
8.0 10.0 8.0 PSM-0810-08 18.0 20.0 25.0 PSM-1820-25
8.0 10.0 10.0 PSM-0810-10 18.0 20.0 33.0 PSM-1820-33
8.0 10.0 11.5 PSM-0810-11 20.0 22.0 22.0 PSM-2022-22
8.0 10.0 12.0 PSM-0810-12 20.0 22.0 30.0 PSM-2022-30
+0.025
10.0 12.0 8.0 PSM-1012-08 20.0 22.0 48.0 PSM-2022-48
+0.083
10.0 12.0 10.0 PSM-1012-10 20.0 22.0 51.0 PSM-2022-51
10.0 12.0 12.0 PSM-1012-12 20.0 23.0 10.0 PSM-2023-10
10.0 12.0 15.0 PSM-1012-15 20.0 23.0 15.0 PSM-2023-15
10.0 12.0 20.0 PSM-1012-20 20.0 23.0 20.0 PSM-2023-20
12.0 14.0 10.0 PSM-1214-10 20.0 23.0 25.0 PSM-2023-25
+0.040
12.0 14.0 12.0 PSM-1214-12 20.0 23.0 30.0 PSM-2023-30
+0.124
12.0 14.0 15.0 PSM-1214-15 22.0 24.0 42.0 PSM-2224-42
12.0 14.0 20.0 PSM-1214-20 22.0 24.0 45.0 PSM-2224-45
12.0 +0.032 14.0 25.0 PSM-1214-25 22.0 25.0 15.0 PSM-2225-15 Couldn't find your size?
13.0 +0.102 15.0 10.0 PSM-1315-10 22.0 25.0 20.0 PSM-2225-20 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
13.0 15.0 20.0 PSM-1315-20 22.0 25.0 25.0 PSM-2225-25 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
14.0 16.0 15.0 PSM-1416-15 22.0 25.0 30.0 PSM-2225-30
14.0 16.0 20.0 PSM-1416-20 22.0 25.0 45.0 PSM-2225-45 Even more dimensions from stock
14.0 16.0 25.0 PSM-1416-25 23.0 25.0 37.0 PSM-2325-37 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
118 Online tools and more information www.igus.eu/p 3D-CAD files, prices and delivery time online www.igus.eu/p 119
PFM iglidur® P | Product range iglidur® P | Product range PFM
30
m
r d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
°
Tolerance 3) d13 h13 Tolerance3) d13 h13
Type Dimensions [mm]
30.0 +0.040 34.0 42.0 30.0 2.0 PFM-3034-30 45.0 +0.050 50.0 58.0 50.0 2.0 PFM-4550-50
30.0 +0.124 34.0 42.0 37.0 2.0 PFM-3034-37 50.0 +0.150 55.0 63.0 50.0 2.0 PFM-5055-50
d2
d3
d1
35.0 39.0 47.0 16.0 2.0 PFM-3539-16 60.0 65.0 73.0 40.0 2.0 PFM-6065-40
35.0 +0.050 39.0 47.0 26.0 2.0 PFM-3539-26 60.0 +0.060 65.0 73.0 50.0 2.0 PFM-6065-50
iglidur® material
40.0 +0.150 44.0 52.0 30.0 2.0 PFM-4044-30 70.0 +0.180 75.0 83.0 50.0 2.0 PFM-7075-50
b2
40.0 44.0 52.0 40.0 2.0 PFM-4044-40 80.0 85.0 93.0 100.0 2.5 PFM-8085-100
Outer-Ø d2
Inner-Ø d1
Length b1
b1 3)
After press-fit. Testing methods Page 57
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
120 Online tools and more information www.igus.eu/p 3D-CAD files, prices and delivery time online www.igus.eu/p 121
iglidur®
P My sketches
Load [MPa]
UV resistance
0.1
0.001 0.01 0.1 1.0 10.0 iglidur® K plain bearings become discoloured under UV
Surface speed [m/s] radiation. However, the material properties do not change.
Diagram 01: Permissible pv values for iglidur® K bearings
Available from stock with a wall thickness of 1 mm dry running against a Medium Resistance
Detailed information about delivery time online. steel shaft, at +20 °C, mounted in a steel housing Alcohol + to 0
Hydrocarbons +
Block pricing online Greases, oils without additives +
No minimum order value. From batch size 1. Moisture absorption Fuels +
The humidity absorption of iglidur® K bearings amounts to Diluted acids 0 to –
Max. +170 °C about 0.1 % weight in standard climatic conditions. The Strong acids –
Min. –40 °C saturation limit submerged in water is 0.6 % weight. These Diluted alkalines +
values are so low that a moisture expansion need to be Strong alkalines 0
Ø 6–20 mm considered only in extreme cases.
+ resistant 0 conditionally resistant – not resistant
More dimensions upon request
Diagram, www.igus.eu/k-moisture All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Online product finder Vacuum
www.igus.eu/iglidur-finder When used in vacuum, the iglidur® K plain bearings release Chemical table, page 1478
124 Online tools and more information www.igus.eu/k 3D-CAD files, prices and delivery time online www.igus.eu/k 125
K K
+170 °C iglidur K | Technical data
®
iglidur K | Technical data ® +170 °C
50 MPa 50 MPa
0.25 45
iglidur® K is characterised by its good wear characteristics at Permissible surface speeds 0.24 40
low moisture absorption and good thermal and mechanical iglidur® K has been developed for low to medium surface 0.23 35
specifications. This supports a very universal application speeds. The maximum values shown in table 03 can only 0.22
Wear [µm/km]
Mechanical properties levels. In practice, though, this temperature level is rarely 0.18 15
10
With increasing temperatures, the compressive strength of reached due to varying application conditions. 0.17
5 rotating oscillating
0.16
iglidur® K plain bearings decreases. The diagram 02 shows
0.15 0
this inverse relationship. The recommended maximum Surface speed, page 44 0 10 20 30 40 50 60 0 10 20 30 40 50 60
surface pressure is a mechanical material parameter. No Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Continuous 1 0.7 3 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Short-term 2 1.4 4 steel, as a function of the pressure
HR carbon steel
H.a. aluminium
1.0 3
Wear [µm/km]
304 SS
0.0 0.15
Cf53
0 5 10 15 20 25 30 35 40 45 50 55 60 0.05 0.10 0.15 0.20 0.25 0.30 0.35 1
Load [MPa] Surface speed [m/s] 0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa p = 1 MPa, v = 0.3 m/s
126 Online tools and more information www.igus.eu/k 3D-CAD files, prices and delivery time online www.igus.eu/k 127
KSM iglidur® K | Product range iglidur® K | Product range KFM
d2
d1
d3
2)
°
30
d2
d1
2)
°
30
f b2
f r = max.
iglidur® material
iglidur® material
b1
b1
0.5 mm
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
128 Online tools and more information www.igus.eu/k 3D-CAD files, prices and delivery time online www.igus.eu/k 129
iglidur®
K My sketches
Load [MPa]
●● Automotive UV radiation.
●● Industrial handling
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol + to 0
Diagram 01: Permissible pv values for iglidur® GLW Hydrocarbons +
Available upon request
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Detailed information about delivery time online.
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Diluted acids 0 to –
Order-related Moisture absorption Strong acids –
The moisture absorption of iglidur® GLW plain bearings is Diluted alkalines +
approximately 1.3 % weight in standard climatic conditions. Strong alkalines 0
Max. +100 °C
The saturation limit in water is 5.5 % weight. This must be
Min. –40 °C + resistant 0 conditionally resistant – not resistant
taken into account for these types of applications.
All data given at room temperature [+20 °C]
Diagram, www.igus.eu/glw-moisture Table 02: Chemical resistance
Order-related
Vacuum
When used in vacuum, the iglidur® GLW plain bearings Chemical table, page 1478
Online product finder
release moisture as a vapour. Use in a vacuum should be
www.igus.eu/iglidur-finder
tested beforehand.
132 Online tools and more information www.igus.eu/glw 3D-CAD files, prices and delivery time online www.igus.eu/glw 133
GLW GLW
+100 °C iglidur GLW | Technical data
®
iglidur GLW | Technical data ® +100 °C
80 MPa 80 MPa
10 0.35 100
With plain bearings made from iglidur® GLW we can
30
offer our customers an alternative to iglidur® G for mass 8
0.30
production applications. Featuring similar mechanical 25
HR carbon steel
H.a. aluminium
primarily recommended for static loads. With regard to
Deformation [%]
4 15
Wear [µm/km]
these applications, in which the dynamic properties of 10
0.20
304 SS
iglidur® G to a large extent are unimportant, iglidur® GLW 2
5
Cf53
presents a very cost-effective alternative.
0 0.15 0
0 10 20 30 40 50 60 70 80 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
Mechanical properties Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
With increasing temperatures, the compressive strength Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
of iglidur® GLW plain bearings decreases. The diagram surface speed, p = 0.75 MPa
02 shows this inverse relationship. The recommended
maximum surface pressure is a mechanical material 0.30
Installation tolerances
parameter. No conclusions regarding the tribological Permissible surface speeds 0.25 iglidur® GLW plain bearings are standard bearings for
properties can be drawn from this. iglidur® GLW was developed for low to average surface
shafts with h-tolerance (recommended minimum h9). The
134 Online tools and more information www.igus.eu/glw 3D-CAD files, prices and delivery time online www.igus.eu/glw 135
iglidur endurance runner materials
®
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
[µ] 125)
Every iglidur® bearing is naturally optimised for wear, Available from stock
but the materials in this group are characterised Detailed information about delivery time online.
by, like the standards iglidur® J and iglidur® W300, iglidur® J260 – Ideal for plastic shafts
particularly low rates of wear, or in other words a Block pricing online Wear resistant at medium temperatures and loads 120
40 0.16
long service life. No minimum order value. From batch size 1. Page 181
0.11
Besides the absolute service life and price level,
they differ inter alia in terms of potential tempe Ø 1.5–139 mm
rature and load ranges, and the suitability in con More dimensions upon request iglidur® W360 – Endurance runner up to +180 °C 180
junction with special shaft materials. For applications with no significant influence from 75
●● Lubrication and maintenance-free Imperial dimensions available media or humidity
●● Lightweight From page 1391 Page 189 0.07 0.24
●● Good price / performance ratio
●● Predictable service life Online product finder
www.igus.eu/iglidur-finder iglidur® L250 – For fast rotating applications
Low coefficient of friction at low load applications
45 0.18
Page 197 90
0.20
Coefficient of friction
Temperature [°C] 123)
Price index
59
[MPa] 124)
1.50
Page 205 0.12
[µ] 125)
iglidur® J – The versatile endurance runner
iglidur® L500 – For extreme rotational speeds
High wear resistance on (almost) all shafts, very low 70
Temperature-resistant and media-resistant 250
coefficients of friction 0.16 0.19
90 35 0.29 Page 213 1.00
Page 141
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C; 123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating 125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
138 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 139
The versatile endurance runner –
iglidur J ®
140
J
iglidur®
J iglidur J | The versatile endurance runner
®
iglidur J | Technical data
® +90 °C
35 MPa
High wear resistance on (almost) all shafts, very low coefficients of friction
Material properties
Low wear against One main advantage of iglidur® J plain bearings General properties Unit iglidur® J Testing method
different shaft materials is the combination of a low coefficient of friction Density g/cm3 1.49
when running dry and the low stickslip tendency. Colour yellow
With a recommended maximum surface pressure Max. moisture absorption at +23 °C/50 % r.h. % weight 0.3 DIN 53495
of 35 MPa, iglidur® J plain bearings are not suitable Max. water absorption % weight 1.3
Low friction when for extreme loads. Coefficient of sliding friction, dynamic, against steel µ 0.06–0.18
running dry pv value, max. (dry) MPa · m/s 0.34
Mechanical properties
Flexural modulus MPa 2,400 DIN 53457
When to use it? Flexural strength at +20 °C MPa 73 DIN 53452
●● For high speeds Compressive strength MPa 60
Vibration dampening ●● For highest wear resistance at low to medium Max. recommended surface pressure (+20 °C) MPa 35
pressures Shore-D hardness 74 DIN 53505
●● Low wear against different shafts Physical and thermal properties
●● Low coefficient of friction in dry operation Max. long-term application temperature °C +90
Good resistance ●● Vibration dampening Max. short-term application temperature °C +120
to chemicals ●● Good chemical resistance Min. long-term application temperature °C –50
●● Best performance with soft shaft materials Heat conductivity W/m · K 0.25 ASTM C 177
●● Low moisture absorption Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
10 DIN 53752
Electrical properties
Best material to use Specific contact resistance Ωcm > 1013 DIN IEC 93
with soft shaft materials Surface resistance Ω > 10 12
DIN 53482
When not to use it? Table 01: Material properties table
●● When high pressures occur 100.0
Radiation resistance
iglidur® G, page 79
Plain bearings made from iglidur® J are resistant up to a
Low moisture iglidur® W300, page 153 10.0
radiation intensity of 3 · 102 Gy.
absorption ●● When short-term temperatures occur
that are higher +120 °C 1.0
UV resistance
iglidur® G, page 79
iglidur® J plain bearings become discoloured under UV
Load [MPa]
iglidur® Z, page 255 0.1
radiation. However, the material properties do not change.
●● When a cost-effective bearing for
occasional movements is necessary 0.01
Available from stock Medium Resistance
iglidur® G, page 79 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® J bearings Hydrocarbons +
Typical application areas
Block pricing online with a wall thickness of 1 mm dry running against a Greases, oils without additives +
●● Automation
No minimum order value. From batch size 1. steel shaft, at +20 °C, mounted in a steel housing Fuels +
●● Printing industry
●● Beverage technology Diluted acids 0 to –
Max. +90 °C Strong acids –
●● Aerospace engineering Moisture absorption
Min. –50 °C Diluted alkalines +
●● Clean room The moisture absorption of iglidur® J plain bearings is 0.3 %
weight in standard climatic conditions. The saturation limit Strong alkalines + to 0
Ø 1.5–139 mm
in water is 1.3 % weight. These values are so low that + resistant 0 conditionally resistant – not resistant
More dimensions upon request
design changes due to absorption are only necessary in All data given at room temperature [+20 °C]
extreme cases. Table 02: Chemical resistance
Imperial dimensions available
From page 1391 Diagram, www.igus.eu/j-moisture
Chemical table, page 1478
Vacuum
Online product finder
iglidur® J plain bearings outgas in a vacuum. Therefore, only
www.igus.eu/iglidur-finder
dehumidified bearings are suitable in vacuum.
142 Online tools and more information www.igus.eu/j 3D-CAD files, prices and delivery time online www.igus.eu/j 143
J J
+90 °C iglidur J | Technical data
®
iglidur J | Technical data ® +90 °C
35 MPa 35 MPa
0.30 3.5
One main advantage of iglidur® J plain bearings is the Permissible surface speeds
0.25 3.0
combination of a low coefficient of friction when running The low coefficient of friction and the extremely low stick slip
dry and the low stickslip tendency. tendency of iglidur® J plain bearings are especially important 2.5
Wear [µm/km]
With increasing temperatures, the compressive strength static friction is very low and stick slip does not occur. The 0.10
1.0
of iglidur® J plain bearings decreases. The diagram 02 maximum values shown in table 03 can only be achieved 0.05 0.5
shows this inverse relationship. However, at the long-term at low pressures. At the given speeds, friction can cause
0.00 0.0
maximum temperature of +90 °C the permissible surface a temperature increase to maximum permissible levels. In 0 5 10 15 20 25 30 35 Cf53 hard 304 SS HR carbon
pressure is almost 20 MPa. The recommended maximum practice, though, this temperature level is rarely reached Load [MPa] chromed steel
surface pressure is a mechanical material parameter. No due to varying application conditions. Diagram 05: Coefficient of friction as a function of the rotating oscillating
conclusions regarding the tribological properties can be pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
drawn from this. Surface speed, page 44 tions with different shaft materials, p = 2 MPa
Temperatures
20 testing different shaft materials with plain bearings made E10 tolerances. For specific dimensions the tolerance differs
iglidur® J plain bearings can be used between –50 °C and
from iglidur® J. When compared to most iglidur® materials, depending on the wall thickness (please see the product
0 +90 °C; the short-term maximum permissible temperature
20 30 40 50 60 70 80 90 iglidur® J has very low wear results at low loads compared range table).
is +120 °C. Also, the wear increases significantly above
Temperature [°C] with all shaft materials tested. Also, for increasing pressures
+80 °C. At temperatures over +60 °C an additional securing
Diagram 02: Permissible maximum surface pressure of up to 5 MPa, the wear resistance of iglidur® J is excellent. If Testing methods, page 57
is required.
as a function of temperature (35 MPa at +20 °C) the shaft material you plan on using is not shown in these
test results, please contact us. Diameter Shaft iglidur® J Housing
Application temperatures, page 49
With a recommended maximum surface pressure of 35 MPa, Additional securing, page 49 d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
iglidur® J plain bearings are not suitable for extreme loads.
Diagram 03 shows the elastic deformation of iglidur® J at > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Friction and wear iglidur J ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
radial loads.
Similar to wear resistance, the coefficient of friction also C. o. f. µ 0.06–0.18 0.09 0.04 0.04 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
changes with the load (diagrams 04 and 05). > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Surface pressure, page 41 Table 04: Coefficient of friction against steel (Ra = 1
μm, 50 HRC) > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Coefficients of friction and surfaces, page 47 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Wear resistance, page 50 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
12.5 0.4 1.2
> 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
Table 05: Important tolerances for plain bearings
10.0 1.0
according to ISO 3547-1 after pressfit
HR carbon steel
H.a. aluminium
Deformation [%]
5.0
Wear [µm/km]
0.2 0.4
304 SS
2.5
0.2
144 Online tools and more information www.igus.eu/j 3D-CAD files, prices and delivery time online www.igus.eu/j 145
JSM iglidur® J | Product range iglidur® J | Product range JSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
10.0 +0.040 +0.130 14.0 16.0 JSM-1014-16 20.0 23.0 10.0 JSM-2023-10
+0.040
12.0 14.0 6.0 JSM-1214-06 20.0 23.0 15.0 JSM-2023-15
d1
d2
0.5 +0.124
12.0 14.0 8.0 JSM-1214-08 20.0 23.0 20.0 JSM-2023-20
12.0 14.0 9.0 JSM-1214-09 20.0 +0.020 23.0 25.0 JSM-2023-25
+0.032
30°
iglidur® material
12.0 14.0 10.0 JSM-1214-10 20.0 +0.104 23.0 30.0 JSM-2023-30
b1 +0.102
12.0 14.0 12.0 JSM-1214-12 20.0 26.0 6.0 JSM-2026-06
Outer-Ø d2
Inner-Ø d1
Length b1
12.0 14.0 15.0 JSM-1214-15 20.0 +0.065 26.0 20.0 JSM-2026-20
Form S
Metric
12.0 14.0 20.0 JSM-1214-20 20.0 +0.195 26.0 25.0 JSM-2026-25
2)
Thickness < 1 mm: chamfer = 20° 12.0 +0.050 16.0 12.0 JSM-1216-12 20.0 26.0 30.0 JSM-2026-30
12.0 +0.160 16.0 17.0 JSM-1216-17 21.0 24.0 12.0 JSM-2124-12
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 13.0 15.0 10.0 JSM-1315-10 22.0 25.0 15.0 JSM-2225-15
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 13.0 15.0 20.0 JSM-1315-20 22.0 25.0 20.0 JSM-2225-20
f [mm]: 0.3 0.5 0.8 1.2 13.0 16.0 18.5 JSM-1316-185 22.0 25.0 25.0 JSM-2225-25
Imperial dimensions available
From page 1407 14.0 16.0 5.0 JSM-1416-05 22.0 25.0 30.0 JSM-2225-30
Dimensions [mm] 14.0 +0.032 16.0 8.0 JSM-1416-08 23.0 26.0 12.0 JSM-2326-12
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 14.0 +0.102 16.0 10.0 JSM-1416-10 24.0 27.0 15.0 JSM-2427-15
Tolerance3) h13 Tolerance3) h13 14.0 16.0 15.0 JSM-1416-15 24.0 27.0 20.0 JSM-2427-20
+0.040
1.5 +0.014 4.0 2.0 JSM-0104-02 6.0 8.0 8.0 JSM-0608-08 14.0 16.0 20.0 JSM-1416-20 24.0 27.0 25.0 JSM-2427-25
+0.020 +0.124
2.0 +0.054 3.5 7.0 JSM-0203-07 14.0 16.0 25.0 JSM-1416-25 24.0 27.0 30.0 JSM-2427-30
6.0 +0.068 8.0 10.0 JSM-0608-10
2.0 +0.020 5.0 2.5 JSM-0205-02 14.0 18.0 18.0 JSM-1418-18 24.0 27.0 46.0 JSM-2427-46
2.5 +0.080 6.0 2.5 JSM-0206-02 6.0 +0.030 9.0 6.0 JSM-0609-06 +0.050 25.0 28.0 12.0 JSM-2528-12
14.0 20.0 20.0 JSM-1420-20
3.0 +0.014 4.5 5.0 JSM-0304-05 6.0 +0.105 10.0 10.0 JSM-0610-10 +0.160 25.0 28.0 15.0 JSM-2528-15
3.0 +0.054 4.5 9.0 JSM-0304-09 7.0 9.0 5.0 JSM-0709-05 15.0 17.0 6.0 JSM-1517-06 25.0 28.0 20.0 JSM-2528-20
3.0 5.0 4.0 JSM-0305-04 7.0 9.0 7.0 JSM-0709-07 15.0 17.0 10.0 JSM-1517-10 25.0 28.0 25.0 JSM-2528-25
3.0 +0.020 7.0 14.0 JSM-0307-14 7.0 9.0 9.0 JSM-0709-09 15.0 17.0 12.0 JSM-1517-12 25.0 28.0 30.0 JSM-2528-30
3.0 +0.080 8.0 4.0 JSM-0308-04 7.0 9.0 12.5 JSM-0709-125 15.0 17.0 15.0 JSM-1517-15 25.0 28.0 60.0 JSM-2528-60
3.0 8.0 5.0 JSM-0308-05 8.0 10.0 3.0 JSM-0810-03 15.0 17.0 20.0 JSM-1517-20 25.0 30.0 40.0 JSM-2530-40
+0.025
4.0 5.5 4.0 JSM-0405-04 8.0 10.0 4.0 JSM-0810-04 15.0 +0.032 17.0 25.0 JSM-1517-25 25.0 32.0 25.0 JSM-2532-25
+0.083 +0.065
4.0 5.5 6.0 JSM-0405-06 8.0 10.0 6.0 JSM-0810-06 15.0 +0.102 18.0 10.0 JSM-1518-10 25.0 32.0 32.0 JSM-2532-32
+0.195
4.0 5.5 8.0 JSM-0405-08 8.0 10.0 8.0 JSM-0810-08 16.0 18.0 10.0 JSM-1618-10 25.0 32.0 35.0 JSM-2532-35
+0.020
5.0 7.0 4.6 JSM-0507-046 8.0 10.0 10.0 JSM-0810-10 16.0 18.0 12.0 JSM-1618-12 26.0 30.0 20.0 JSM-2630-20
+0.068
5.0 7.0 5.0 JSM-0507-05 8.0 10.0 12.0 JSM-0810-12 16.0 18.0 15.0 JSM-1618-15 +0.040
27.0 30.0 20.0 JSM-2730-20
5.0 7.0 10.0 JSM-0507-10 8.0 10.0 16.0 JSM-0810-16 16.0 18.0 20.0 JSM-1618-20 +0.124
5.0 7.0 14.0 JSM-0507-14 8.0 +0.040 12.0 10.0 JSM-0812-10 16.0 18.0 25.0 JSM-1618-25 28.0 32.0 20.0 JSM-2832-20
+0.065
+0.020 8.0 +0.130 12.0 12.0 JSM-0812-12 16.0 20.0 16.0 JSM-1620-16 28.0 32.0 25.0 JSM-2832-25
5.0 7.0 15.0 JSM-0507-15 +0.050 +0.195
+0.080 9.0 11.0 10.0 JSM-0911-10 16.0 22.0 16.0 JSM-1622-16 28.0 32.0 30.0 JSM-2832-30
+0.160
+0.030 10.0 12.0 5.0 JSM-1012-05 16.0 22.0 20.0 JSM-1622-20 30.0 34.0 20.0 JSM-3034-20
5.0 8.0 5.0 JSM-0508-05
+0.105 10.0 12.0 6.0 JSM-1012-06 17.0 19.0 6.0 JSM-1719-06 30.0 +0.040 34.0 25.0 JSM-3034-25
6.0 7.0 3.0 JSM-0607-03 10.0 12.0 8.0 JSM-1012-08 18.0 20.0 10.0 JSM-1820-10 30.0 +0.124 34.0 30.0 JSM-3034-30
+0.025
6.0 7.0 5.0 JSM-0607-05 10.0 12.0 10.0 JSM-1012-10 18.0 +0.032 20.0 15.0 JSM-1820-15 30.0 34.0 40.0 JSM-3034-40
+0.010 +0.083
6.0 7.0 8.0 JSM-0607-08 10.0 12.0 11.0 JSM-1012-11 18.0 +0.102 20.0 20.0 JSM-1820-20 +0.065
+0.058 30.0 38.0 40.0 JSM-3038-40
6.0 7.0 12.5 JSM-0607-12.5 10.0 12.0 12.0 JSM-1012-12 18.0 20.0 25.0 JSM-1820-25 +0.195
6.0 7.0 14.0 JSM-0607-14 10.0 12.0 15.0 JSM-1012-15 19.0 22.0 14.0 JSM-1922-14 32.0 36.0 20.0 JSM-3236-20
+0.050
6.0 +0.020 8.0 4.3 JSM-0608-043 10.0 12.0 20.0 JSM-1012-20 20.0 +0.040 22.0 20.0 JSM-2022-20 32.0 36.0 30.0 JSM-3236-30
+0.150
6.0 +0.068 8.0 6.0 JSM-0608-06 10.0 +0.040 +0.130 14.0 10.0 JSM-1014-10 20.0 +0.124 22.0 30.0 JSM-2022-30 32.0 36.0 40.0 JSM-3236-40
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
146 Online tools and more information www.igus.eu/j 3D-CAD files, prices and delivery time online www.igus.eu/j 147
JSM iglidur® J | Product range iglidur® J | Product range JFM
30
m
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. r
°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
32.0 37.0 25.0 JSM-3237-25 45.0 +0.025 +0.125 50.0 50.0 JSM-4550-50
32.0 38.0 50.0 JSM-3238-50 50.0 55.0 20.0 JSM-5055-20
d2
d3
d1
35.0 39.0 20.0 JSM-3539-20 50.0 55.0 30.0 JSM-5055-30
+0.050
35.0 39.0 30.0 JSM-3539-30 50.0 55.0 40.0 JSM-5055-40
+0.150
iglidur® material
35.0 39.0 40.0 JSM-3539-40 50.0 55.0 50.0 JSM-5055-50
b2
35.0 +0.050 39.0 50.0 JSM-3539-50 50.0 55.0 60.0 JSM-5055-60
Outer-Ø d2
Inner-Ø d1
Length b1
36.0 +0.150 40.0 45.0 JSM-3640-45 55.0 60.0 60.0 JSM-5560-60 b1
Form F
Metric
40.0 44.0 20.0 JSM-4044-20 60.0 65.0 60.0 JSM-6065-60
40.0 44.0 30.0 JSM-4044-30 65.0 70.0 50.0 JSM-6570-50
2)
Thickness < 1 mm: chamfer = 20°
+0.060
40.0 44.0 35.0 JSM-4044-35 70.0 75.0 60.0 JSM-7075-60
+0.180 Chamfer in relation to the d1 Dimensions according to ISO 3547-1
40.0 44.0 40.0 JSM-4044-40 75.0 80.0 60.0 JSM-7580-60
40.0 44.0 50.0 JSM-4044-50 80.0 85.0 100.0 JSM-8085-100 d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
42.0 +0.080 +0.240 46.0 73.0 JSM-4246-73 80.0 86.0 60.0 JSM-8086-60 f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
45.0 50.0 20.0 JSM-4550-20 100.0 +0.072 105.0 100.0 JSM-100105-100 From page 1432
+0.025 Dimensions [mm]
45.0 50.0 30.0 JSM-4550-30 110.0 +0.212 115.0 60.0 JSM-110115-60
+0.125
45.0 50.0 40.0 JSM-4550-40 d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
3)
After press-fit. Testing methods Page 57
3.0 4.5 7.5 3.0 0.75 JFM-0304-03 8.0 12.0 16.0 9.0 2.0 JFM-0812-09
+0.014
3.0 4.5 7.5 4.5 0.75 JFM-0304-045 10.0 12.0 18.0 5.0 1.0 JFM-1012-05
+0.054
3.0 4.5 7.5 5.0 0.75 JFM-0304-05 10.0 12.0 18.0 7.0 1.0 JFM-1012-07
+0.020 10.0 12.0 18.0 9.0 1.0 JFM-1012-09
3.0 6.0 9.0 10.0 1.5 JFM-0306-10
+0.080 10.0 12.0 18.0 10.0 1.0 JFM-1012-10
+0.025
4.0 5.5 9.5 3.0 0.75 JFM-0405-03 10.0 12.0 18.0 12.0 1.0 JFM-1012-12
+0.083
4.0 5.5 9.5 6.0 0.75 JFM-0405-06 10.0 12.0 18.0 15.0 1.0 JFM-1012-15
5.0 6.0 10.0 5.0 0.5 JFM-0506-05 10.0 12.0 18.0 17.0 1.0 JFM-1012-17
5.0 7.0 11.0 3.0 1.0 JFM-0507-03 10.0 12.0 18.0 18.0 1.0 JFM-1012-18
+0.020
5.0 7.0 11.0 5.0 1.0 JFM-0507-05 10.0 12.0 15.0 3.5 1.0 JFM-101215-035
+0.068
6.0 8.0 12.0 4.0 1.0 JFM-0608-04 10.0 14.0 17.5 14.0 1.0 JFM-1014-14
6.0 8.0 12.0 6.0 1.0 JFM-0608-06 11.0 13.0 18.0 5.0 1.0 JFM-1113-05
6.0 8.0 12.0 8.0 1.0 JFM-0608-08 12.0 14.0 20.0 4.0 1.0 JFM-1214-04
6.0 8.0 12.0 10.0 1.0 JFM-0608-10 12.0 14.0 20.0 5.0 1.0 JFM-1214-05
+0.030 12.0 14.0 20.0 7.0 1.0 JFM-1214-07
6.0 10.0 14.0 10.0 2.0 JFM-0610-10
+0.105 12.0 +0.032 14.0 20.0 9.0 1.0 JFM-1214-09
8.0 10.0 15.0 3.8 1.0 JFM-0810-038 12.0 +0.102 14.0 20.0 12.0 1.0 JFM-1214-12
8.0 10.0 15.0 5.0 1.0 JFM-0810-05 12.0 14.0 20.0 15.0 1.0 JFM-1214-15
8.0 10.0 15.0 6.0 1.0 JFM-0810-06 12.0 14.0 20.0 17.0 1.0 JFM-1214-17
8.0 10.0 15.0 7.0 1.0 JFM-0810-07 12.0 14.0 18.0 4.5 1.0 JFM-121418-045
8.0 10.0 15.0 8.0 1.0 JFM-0810-08 12.0 14.0 18.0 10.0 1.0 JFM-121418-10
8.0 +0.025 10.0 15.0 9.5 1.0 JFM-0810-09 12.0 18.0 24.0 8.0 3.0 JFM-1218-08
+0.050
Couldn't find your size? 8.0 +0.083 10.0 15.0 10.0 1.0 JFM-0810-10 12.0 18.0 24.0 12.0 3.0 JFM-1218-12
+0.160
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your 8.0 10.0 12.5 10.0 1.0 JFM-0810125-10 12.0 18.0 22.0 20.0 3.0 JFM-1218-20
application? Please call us. igus® listens to your needs and provides you a solution very quickly. 8.0 10.0 12.0 16.0 1.0 JFM-081012-16 14.0 16.0 22.0 3.0 1.0 JFM-1416-03
8.0 10.0 14.0 10.0 1.0 JFM-081014-10 14.0 +0.032 16.0 22.0 10.0 1.0 JFM-1416-10
Even more dimensions from stock 8.0 10.0 16.0 11.0 2.0 JFM-081016-11 14.0 +0.102 16.0 22.0 12.0 1.0 JFM-1416-12
More than 300 dimensions are now available. Search online for your required bearing. 8.0 12.0 16.0 6.0 2.0 JFM-0812-06 14.0 16.0 22.0 17.0 1.0 JFM-1416-17
www.igus.eu/iglidur-specialbearings 3)
After press-fit. Testing methods Page 57
148 Online tools and more information www.igus.eu/j 3D-CAD files, prices and delivery time online www.igus.eu/j 149
JFM iglidur® J | Product range iglidur® J | Product range JTM
Order key
d1 d1- d2 d3 b1 b2 Part No. d1 d1 - d2 d3 b1 b2 Part No.
s
d2
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
14.0 18.0 22.0 20.0 2.0 JFM-141822-20 25.0 28.0 35.0 14.5 1.5 JFM-2528-14.5
14.0 18.0 25.0 24.0 2.0 JFM-141825-24 25.0 +0.040 28.0 35.0 21.5 1.5 JFM-2528-21
15.0 17.0 23.0 4.0 1.0 JFM-1517-04 25.0 +0.124 28.0 39.0 5.0 1.5 JFM-252839-05
+0.032
d5
15.0 17.0 23.0 5.5 1.0 JFM-1517-055 25.0 28.0 39.0 7.5 1.5 JFM-252839-075 d4
+0.102
iglidur® material
15.0 17.0 23.0 9.0 1.0 JFM-1517-09 25.0 32.0 38.0 20.0 4.0 JFM-2532-20
+0.065 d6
15.0 17.0 23.0 12.0 1.0 JFM-1517-12 25.0 32.0 38.0 25.0 4.0 JFM-2532-25
Thickness s
Outer-Ø d2
h
Inner-Ø d1
+0.195
15.0 17.0 23.0 17.0 1.0 JFM-1517-17 28.0 32.0 35.0 7.0 2.0 JFM-283235-07
Form T
Metric
+0.050 28.0 32.0 39.0 20.0 2.0 JFM-283239-20
15.0 21.0 27.0 20.0 3.0 JFM-1521-20
+0.160 30.0 32.0 40.0 12.0 1.0 JFM-303240-12
+0.040
16.0 18.0 24.0 6.0 1.0 JFM-1618-06 30.0 34.0 42.0 16.0 2.0 JFM-3034-16
+0.124 Dimensions according to ISO 3547-1
16.0 +0.032 18.0 24.0 12.0 1.0 JFM-1618-12 30.0 34.0 42.0 20.0 2.0 JFM-3034-20
16.0 +0.102 18.0 24.0 16.0 1.0 JFM-1618-16 30.0 34.0 42.0 26.0 2.0 JFM-3034-26 and special dimensions
16.0 18.0 24.0 17.0 1.0 JFM-1618-17 +0.080
30.0 38.0 44.0 20.0 4.0 JFM-3038-20 Dimensions [mm]
16.0 +0.050 22.0 28.0 12.0 3.0 JFM-1622-12 +0.240
16.0 +0.160 22.0 28.0 15.0 3.0 JFM-1622-15 30.0 +0.065 38.0 44.0 30.0 4.0 JFM-3038-30 d1 d2 s d4 d5 h d6 Part No.
17.0 19.0 25.0 9.0 1.0 JFM-1719-09 30.0 +0.195 38.0 44.0 36.0 4.0 JFM-3038-36 +0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12
17.0 19.0 25.0 21.0 1.0 JFM-1719-21 35.0 39.0 47.0 12.0 2.0 JFM-3539-12 +0.12 +0.125 –0.2
18.0 20.0 26.0 4.0 1.0 JFM-1820-04 35.0 39.0 47.0 16.0 2.0 JFM-3539-16 12.0 24.0 1.5 18.0 1.5 1.0 24.0 JTM-1224-015
18.0 20.0 26.0 12.0 1.0 JFM-1820-12 35.0 39.0 47.0 26.0 2.0 JFM-3539-26 12.0 34.0 1.5 4) 4)
1.0 34.0 JTM-1234-015
+0.032
18.0 20.0 26.0 17.0 1.0 JFM-1820-17 40.0 44.0 52.0 20.0 2.0 JFM-4044-20 14.0 20.0 1.5 4) 4)
1.0 20.0 JTM-1420-015
+0.102
18.0 20.0 26.0 22.0 1.0 JFM-1820-22 40.0 44.0 52.0 30.0 2.0 JFM-4044-30 20.0 36.0 1.5 28.0 3.0 1.0 36.0 JTM-2036-015
+0.050
18.0 21.0 25.0 12.0 1.0 JFM-1821-12 40.0 44.0 52.0 40.0 2.0 JFM-4044-40 28.0 42.0 2.0 38.0 4.0 1.0 48.0 JTM-2842-020
+0.150
19.0 22.0 26.0 23.0 1.0 JFM-1922-23 45.0 50.0 58.0 12.0 2.0 JFM-4550-12 30.0 39.0 1.5 4) 4)
1.0 39.0 JTM-3039-015
19.0 22.0 26.0 36.0 1.0 JFM-1922-36 45.0 50.0 58.0 20.0 2.0 JFM-4550-20 56.0 70.0 1.0 4) 4)
0.7 70.0 JTM-5670-010
20.0 23.0 30.0 11.5 1.5 JFM-2023-11 45.0 50.0 58.0 50.0 2.0 JFM-4550-50 139.0 188.0 2.0 4) 4)
1.5 188.0 JTM-139188-020
20.0 +0.040 23.0 30.0 15.5 1.5 JFM-2023-15.5 50.0 55.0 63.0 11.5 2.0 JFM-5055-115 4)
Design without fixing bore
20.0 +0.124 23.0 30.0 16.5 1.5 JFM-2023-16 50.0 55.0 63.0 50.0 2.0 JFM-5055-50
20.0 23.0 30.0 21.5 1.5 JFM-2023-21 55.0 60.0 68.0 50.0 2.0 JFM-5560-50
20.0 26.0 32.0 15.0 3.0 JFM-2026-15 60.0 65.0 73.0 37.0 2.0 JFM-6065-37
+0.065 +0.060
20.0 26.0 32.0 20.0 3.0 JFM-2026-20 60.0 65.0 73.0 50.0 2.0 JFM-6065-50
+0.195 +0.180
20.0 26.0 32.0 25.0 3.0 JFM-2026-25 65.0 70.0 78.0 60.0 2.0 JFM-6570-60
22.0 25.0 32.0 8.0 1.5 JFM-222532-08 70.0 75.0 83.0 50.0 2.0 JFM-7075-50
24.0 30.0 36.0 30.0 3.0 JFM-2430-30 90.0 95.0 103.0 100.0 2.5 JFM-9095-100
+0.040
25.0 28.0 35.0 6.0 1.5 JFM-2528-06 100.0 +0.072 105.0 113.0 100.0 2.5 JFM-100105-100
+0.124
25.0 28.0 35.0 11.5 1.5 JFM-2528-11 110.0 +0.212 115.0 123.0 100.0 2.5 JFM-110115-100
25.0 28.0 35.0 12.0 1.5 JFM-2528-12 120.0 125.0 133.0 100.0 2.5 JFM-120125-100
3)
After press-fit. Testing methods Page 57
150 Online tools and more information www.igus.eu/j 3D-CAD files, prices and delivery time online www.igus.eu/j 151
iglidur®
J My sketches
Load [MPa]
iglidur® G, page 79 UV radiation. A slight change in colour will not significantly
influence their properties.
0.1
Available from stock Typical application areas 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. ●● Automation Surface speed [m/s] Medium Resistance
●● Printing industry Diagram 01: Permissible pv values for iglidur® W300 Alcohol + to 0
Block pricing online ●● Woodworking bearings with a wall thickness of 1 mm dry running against Hydrocarbons +
No minimum order value. From batch size 1. ●● Mechatronics a steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Test engineering and quality assurance Fuels +
Max. +90 °C Diluted acids 0 to –
Moisture absorption
Min. –40 °C Strong acids –
The moisture absorption of iglidur® W300 bearings amounts
to about 1.3 % weight in standard climatic conditions. The Diluted alkalines +
Ø 2–120 mm Strong alkalines 0
saturation limit submerged in water is 6.5 % weight. This
More dimensions upon request
must be taken into account for these types of applications. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Imperial dimensions available Diagram, www.igus.eu/w300-moisture
Table 02: Chemical resistance
From page 1391
Vacuum
iglidur® W300 plain bearings outgas in a vacuum. Use in Chemical table, page 1478
Online product finder
vacuum is only possible to a limited extent.
www.igus.eu/iglidur-finder
154 Online tools and more information www.igus.eu/w300 3D-CAD files, prices and delivery time online www.igus.eu/w300 155
W300 W300
+90 °C iglidur W300 | Technical data
®
iglidur W300 | Technical data ® +90 °C
60 MPa 60 MPa
0.30 70
iglidur® W300 gives excellent wear resistance, even in harsh Permissible surface speeds
0.25 60
environments or when used with rough shafts. This material Even at higher surface speeds, the coefficients of friction
rotating oscillating
is the most tolerant of these external effects out of all the for iglidur® W300 do not increase. Therefore, compared to 50
Wear [µm/km]
Mechanical properties bearing wear remains low when used for long periods at 0.10
20
With increasing temperatures, the compressive strength high speeds, due to exceptional wear resistance. Relatively 0.05 10
of iglidur® W300 plain bearings decreases. The diagram high speeds can be obtained with iglidur® W300 bearings
0.00 0
02 shows this inverse relationship. The recommended on hardened shafts with the recommended surface finish. 0 10 20 30 40 50 60 0.25 0.75 2.00 5.00 10.00 45.00 76.00
maximum surface pressure is a mechanical material Load [MPa] Load [MPa]
Surface speed, page 44
parameter. No conclusions regarding the tribological Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
properties can be drawn from this. m/s Rotating Oscillating Linear pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Continuous 1 0.7 4 steel, as a function of the pressure
120 Short-term 1.5 1.8 6
100 Table 03: Maximum surface speeds Shaft materials Installation tolerances
80 Friction and wear are to a large extent also highly dependent iglidur® W300 plain bearings are standard bearings for
on the shaft materials. Shafts that are too smooth, increase shafts with h-tolerance (recommended minimum h9). The
60 Temperatures
both the coefficient of friction and the wear of the bearing. bearings are designed for pressfit into a housing machined
40
iglidur® W300 bearings maintain their exceptional wear
Smooth shafts have the danger of stick slip. Squeaking to a H7 tolerance. After being assembled into a nominal
Load [MPa]
6
1.2
0.3
1.0
HR carbon steel
H.a. aluminium
2
0.6
Wear [µm/km]
0.4
304 SS
0 0.2
0.2 Cf53
0 15 30 45 60 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s] 0.0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa p = 1 MPa, v = 0.3 m/s
156 Online tools and more information www.igus.eu/w300 3D-CAD files, prices and delivery time online www.igus.eu/w300 157
WSM iglidur® W300 | Product range iglidur® W300 | Product range WSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
13.0 15.0 15.0 WSM-1315-15 22.0 24.0 35.0 WSM-2224-35
13.0 15.0 20.0 WSM-1315-20 22.0 24.0 45.0 WSM-2224-45
d1
d2
0.5 WSM-1416-07 WSM-2225-15
14.0 16.0 7.25 22.0 25.0 15.0
14.0 16.0 10.0 WSM-1416-10 22.0 25.0 20.0 WSM-2225-20
30°
iglidur® material
14.0 16.0 15.0 WSM-1416-15 22.0 25.0 25.0 WSM-2225-25
b1
14.0 16.0 20.0 WSM-1416-20 22.0 25.0 30.0 WSM-2225-30
Outer-Ø d2
Inner-Ø d1
Length b1
14.0 16.0 25.0 WSM-1416-25 24.0 27.0 15.0 WSM-2427-15
Form S
Metric
14.0 16.0 33.0 WSM-1416-33 24.0 27.0 20.0 WSM-2427-20
2)
Thickness < 1 mm: chamfer = 20° 15.0 17.0 10.0 WSM-1517-10 24.0 27.0 25.0 WSM-2427-25
15.0 17.0 15.0 WSM-1517-15 24.0 27.0 30.0 WSM-2427-30
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 15.0 17.0 20.0 WSM-1517-20 25.0 28.0 12.0 WSM-2528-12
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 15.0 17.0 25.0 WSM-1517-25 25.0 28.0 14.0 WSM-2528-14
f [mm]: 0.3 0.5 0.8 1.2 16.0 18.0 7.0 WSM-1618-07 25.0 28.0 15.0 WSM-2528-15
Imperial dimensions available
From page 1419 16.0 +0.032 18.0 8.0 WSM-1618-08 25.0 28.0 20.0 WSM-2528-20
Dimensions [mm] 16.0 +0.102 18.0 11.5 WSM-1618-11 25.0 28.0 25.0 WSM-2528-25
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 16.0 18.0 12.0 WSM-1618-12 25.0 28.0 30.0 WSM-2528-30
Tolerance3) h13 Tolerance3) h13 16.0 18.0 15.0 WSM-1618-15 25.0 28.0 50.0 WSM-2528-50
+0.040
2.0 3.5 3.0 WSM-0203-03 8.0 10.0 13.8 WSM-0810-13 16.0 18.0 20.0 WSM-1618-20 26.0 30.0 16.0 WSM-2630-16
+0.124
2.5 4.0 1.8 WSM-0204-018 8.0 10.0 15.0 WSM-0810-15 16.0 18.0 25.0 WSM-1618-25 26.0 30.0 25.0 WSM-2630-25
2.5 +0.014 4.0 3.0 WSM-0204-03 8.0 10.0 16.0 WSM-0810-16 16.0 18.0 30.0 WSM-1618-30 28.0 30.0 10.0 WSM-2830-10
3.0 +0.054 4.5 3.0 WSM-0304-03 8.0 10.0 20.0 WSM-0810-20 16.0 18.0 35.0 WSM-1618-35 28.0 31.0 10.0 WSM-2831-10
3.0 4.5 5.0 WSM-0304-05 8.0 10.0 21.0 WSM-0810-21 16.0 18.0 45.0 WSM-1618-45 28.0 32.0 20.0 WSM-2832-20
3.0 4.5 6.0 WSM-0304-06 9.0 11.0 6.0 WSM-0911-06 18.0 20.0 12.0 WSM-1820-12 28.0 32.0 25.0 WSM-2832-25
4.0 5.5 4.0 WSM-0405-04 10.0 12.0 4.0 WSM-1012-04 18.0 20.0 15.0 WSM-1820-15 28.0 32.0 30.0 WSM-2832-30
4.0 5.5 6.0 WSM-0405-06 10.0 +0.025 12.0 6.0 WSM-1012-06 18.0 20.0 20.0 WSM-1820-20 30.0 34.0 16.0 WSM-3034-16
4.0 5.5 8.0 WSM-0405-08 10.0 +0.083 12.0 8.0 WSM-1012-08 18.0 20.0 25.0 WSM-1820-25 30.0 34.0 20.0 WSM-3034-20
+0.020
4.0 5.5 10.0 WSM-0405-10 10.0 12.0 9.0 WSM-1012-09 18.0 20.0 33.0 WSM-1820-33 30.0 34.0 24.0 WSM-3034-24
+0.068
5.0 7.0 5.0 WSM-0507-05 10.0 12.0 10.0 WSM-1012-10 18.0 20.0 35.0 WSM-1820-35 30.0 34.0 25.0 WSM-3034-25
5.0 7.0 8.0 WSM-0507-08 10.0 12.0 12.0 WSM-1012-12 19.0 22.0 28.0 WSM-1922-28 30.0 34.0 30.0 WSM-3034-30
5.0 7.0 10.0 WSM-0507-10 10.0 12.0 15.0 WSM-1012-15 20.0 22.0 11.5 WSM-2022-11 30.0 34.0 36.0 WSM-3034-36
+0.010 10.0 12.0 17.0 WSM-1012-17 20.0 22.0 12.0 WSM-2022-12 30.0 34.0 38.0 WSM-3034-38
6.0 7.0 14.0 WSM-0607-14
+0.058 10.0 12.0 20.0 WSM-1012-20 20.0 22.0 15.0 WSM-2022-15 30.0 34.0 40.0 WSM-3034-40
6.0 8.0 6.0 WSM-0608-06 10.0 12.0 25.5 WSM-1012-25.5 20.0 22.0 20.0 WSM-2022-20 30.0 34.0 45.0 WSM-3034-45
6.0 8.0 8.0 WSM-0608-08 11.0 13.0 8.0 WSM-1113-08 20.0 22.0 30.0 WSM-2022-30 30.0 34.0 47.0 WSM-3034-47
6.0 +0.020 8.0 9.5 WSM-0608-09 12.0 14.0 4.0 WSM-1214-04 20.0 23.0 8.0 WSM-2023-08 32.0 36.0 20.0 WSM-3236-20
6.0 +0.068 8.0 10.0 WSM-0608-10 12.0 14.0 5.0 WSM-1214-05 20.0 23.0 10.0 WSM-2023-10 32.0 36.0 25.0 WSM-3236-25
+0.040
6.0 8.0 11.8 WSM-0608-11 12.0 14.0 6.0 WSM-1214-06 20.0 23.0 12.0 WSM-2023-12 32.0 36.0 30.0 WSM-3236-30
+0.124
6.0 8.0 13.8 WSM-0608-13 12.0 14.0 8.0 WSM-1214-08 20.0 23.0 15.0 WSM-2023-15 32.0 36.0 40.0 WSM-3236-40
7.0 9.0 9.0 WSM-0709-09 12.0 +0.032 14.0 10.0 WSM-1214-10 20.0 23.0 20.0 WSM-2023-20 35.0 39.0 20.0 WSM-3539-20
+0.050
7.0 9.0 12.0 WSM-0709-12 12.0 +0.102 14.0 12.0 WSM-1214-12 20.0 23.0 23.0 WSM-2023-23 35.0 39.0 30.0 WSM-3539-30
+0.150
7.0 9.0 12.5 WSM-0709-125 12.0 14.0 15.0 WSM-1214-15 20.0 23.0 25.0 WSM-2023-25 35.0 39.0 40.0 WSM-3539-40
+0.025
8.0 10.0 6.0 WSM-0810-06 12.0 14.0 20.0 WSM-1214-20 20.0 23.0 30.0 WSM-2023-30 35.0 39.0 50.0 WSM-3539-50
+0.083
8.0 10.0 8.0 WSM-0810-08 12.0 14.0 25.0 WSM-1214-25 22.0 24.0 15.0 WSM-2224-15 35.0 40.0 7.0 WSM-3540-07
8.0 10.0 10.0 WSM-0810-10 13.0 15.0 7.0 WSM-1315-07 22.0 24.0 20.0 WSM-2224-20 40.0 44.0 20.0 WSM-4044-20
8.0 10.0 12.0 WSM-0810-12 13.0 15.0 10.0 WSM-1315-10 22.0 24.0 30.0 WSM-2224-30 40.0 44.0 30.0 WSM-4044-30
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
158 Online tools and more information www.igus.eu/w300 3D-CAD files, prices and delivery time online www.igus.eu/w300 159
WSM iglidur® W300 | Product range iglidur® W300 | Product range WFM
30
m
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. r
°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
40.0 44.0 40.0 WSM-4044-40 55.0 60.0 40.0 WSM-5560-40
40.0 44.0 50.0 WSM-4044-50 55.0 60.0 60.0 WSM-5560-60
d2
d3
d1
45.0 50.0 20.0 WSM-4550-20 60.0 65.0 30.0 WSM-6065-30
45.0 50.0 30.0 WSM-4550-30 60.0 65.0 60.0 WSM-6065-60
+0.060
iglidur® material
45.0 50.0 40.0 WSM-4550-40 65.0 70.0 60.0 WSM-6570-60
+0.180 b2
45.0 +0.050 50.0 50.0 WSM-4550-50 70.0 75.0 60.0 WSM-7075-60
Outer-Ø d2
Inner-Ø d1
Length b1
50.0 +0.150 55.0 20.0 WSM-5055-20 75.0 80.0 100.0 WSM-7580-100 b1
Form F
Metric
50.0 55.0 30.0 WSM-5055-30 80.0 85.0 20.0 WSM-8085-20
50.0 55.0 40.0 WSM-5055-40 80.0 85.0 100.0 WSM-8085-100
2)
Thickness < 1 mm: chamfer = 20°
50.0 55.0 50.0 WSM-5055-50 90.0 +0.072 95.0 100.0 WSM-9095-100
50.0 55.0 55.0 WSM-5055-55 100.0 +0.212 105.0 100.0 WSM-100105-100 Chamfer in relation to the d1 Dimensions according to ISO 3547-1
50.0 55.0 60.0 WSM-5055-60 d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
f [mm]: 0.3 0.5 0.8 1.2
3)
After press-fit. Testing methods Page 57 Imperial dimensions available
From page 1441
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
2.5 4.0 6.5 3.0 0.75 WFM-0204-03 10.0 12.0 18.0 6.0 1.00 WFM-1012-06
+0.014
3.0 4.5 7.5 3.0 0.75 WFM-0304-03 10.0 12.0 18.0 7.0 1.00 WFM-1012-07
+0.054
3.0 4.5 7.5 5.0 0.75 WFM-0304-05 10.0 12.0 18.0 9.0 1.00 WFM-1012-09
+0.025
4.0 5.5 9.5 3.0 0.75 WFM-0405-03 10.0 12.0 18.0 10.0 1.00 WFM-1012-10
+0.020 +0.083
4.0 5.5 9.5 4.0 0.75 WFM-0405-04 10.0 12.0 18.0 12.0 1.00 WFM-1012-12
+0.068
4.0 5.5 9.5 6.0 0.75 WFM-0405-06 10.0 12.0 18.0 15.0 1.00 WFM-1012-15
+0.010 10.0 12.0 18.0 17.0 1.00 WFM-1012-17
5.0 6.0 10.0 8.0 0.50 WFM-0506-08
+0.040 12.0 14.0 20.0 4.0 1.00 WFM-1214-04
5.0 7.0 11.0 4.0 1.00 WFM-0507-04 12.0 14.0 20.0 4.4 1.00 WFM-1214-044
5.0 7.0 11.0 5.0 1.00 WFM-0507-05 12.0 14.0 20.0 6.0 1.00 WFM-1214-06
6.0 8.0 12.0 4.0 1.00 WFM-0608-04 12.0 14.0 20.0 7.0 1.00 WFM-1214-07
+0.020
6.0 8.0 12.0 6.0 1.00 WFM-0608-06 12.0 14.0 20.0 9.0 1.00 WFM-1214-09
+0.068
6.0 8.0 12.0 8.0 1.00 WFM-0608-08 12.0 14.0 20.0 10.0 1.00 WFM-1214-10
6.0 8.0 12.0 10.0 1.00 WFM-0608-10 12.0 14.0 20.0 11.0 1.00 WFM-1214-11
6.0 8.0 12.0 15.0 1.00 WFM-0608-15 12.0 14.0 20.0 12.0 1.00 WFM-1214-12
7.0 9.0 15.0 10.0 1.00 WFM-0709-10 12.0 14.0 20.0 15.0 1.00 WFM-1214-15
7.0 9.0 15.0 12.0 1.00 WFM-0709-12 12.0 14.0 20.0 17.0 1.00 WFM-1214-17
+0.032
8.0 10.0 15.0 2.7 1.00 WFM-0810-02 12.0 14.0 20.0 20.0 1.00 WFM-1214-20
+0.102
8.0 10.0 15.0 4.0 1.00 WFM-0810-04 13.0 15.0 22.0 6.0 1.00 WFM-1315-06
8.0 10.0 15.0 5.5 1.00 WFM-0810-05 14.0 16.0 22.0 4.0 1.00 WFM-1416-04
8.0 10.0 15.0 7.5 1.00 WFM-0810-07 14.0 16.0 22.0 5.0 1.00 WFM-1416-05
+0.025
8.0 10.0 15.0 9.5 1.00 WFM-0810-09 14.0 16.0 22.0 8.0 1.00 WFM-1416-08
+0.083
Couldn't find your size? 8.0 10.0 15.0 10.0 1.00 WFM-0810-10 14.0 16.0 22.0 12.0 1.00 WFM-1416-12
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your 8.0 10.0 15.0 23.0 1.00 WFM-0810-23 14.0 16.0 22.0 17.0 1.00 WFM-1416-17
application? Please call us. igus® listens to your needs and provides you a solution very quickly. 8.0 10.0 15.0 30.0 1.00 WFM-0810-30 14.0 16.0 22.0 29.0 1.00 WFM-1416-29
8.0 10.0 15.0 5.0 1.00 WFM-081015-05 15.0 17.0 23.0 9.0 1.00 WFM-1517-09
Even more dimensions from stock 10.0 12.0 18.0 4.0 1.00 WFM-1012-04 15.0 17.0 23.0 12.0 1.00 WFM-1517-12
More than 300 dimensions are now available. Search online for your required bearing. 10.0 12.0 18.0 5.0 1.00 WFM-1012-05 15.0 17.0 23.0 17.0 1.00 WFM-1517-17
www.igus.eu/iglidur-specialbearings 3)
After press-fit. Testing methods Page 57
160 Online tools and more information www.igus.eu/w300 3D-CAD files, prices and delivery time online www.igus.eu/w300 161
WFM iglidur® W300 | Product range iglidur® W300 | Product range WTM
Order key
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
s
d2
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
15.0 17.0 23.0 20.0 1.00 WFM-1517-20 30.0 +0.040 34.0 42.0 26.0 2.00 WFM-3034-26
16.0 18.0 24.0 9.0 1.00 WFM-1618-09 30.0 +0.124 34.0 42.0 37.0 2.00 WFM-3034-37
16.0 18.0 24.0 12.0 1.00 WFM-1618-12 32.0 36.0 40.0 16.0 2.00 WFM-3236-16
d5
16.0 18.0 24.0 17.0 1.00 WFM-1618-17 32.0 36.0 40.0 26.0 2.00 WFM-3236-26 d4
iglidur® material
17.0 19.0 25.0 12.0 1.00 WFM-1719-12 35.0 39.0 47.0 9.0 2.00 WFM-3539-09
+0.032 d6
17.0 19.0 25.0 18.0 1.00 WFM-1719-18 35.0 39.0 47.0 16.0 2.00 WFM-3539-16
Thickness s
Outer-Ø d2
h
Inner-Ø d1
+0.102
17.0 19.0 25.0 25.0 1.00 WFM-1719-25 35.0 39.0 47.0 26.0 2.00 WFM-3539-26
Form T
Metric
18.0 20.0 26.0 6.0 1.00 WFM-1820-06 35.0 +0.050 39.0 50.0 35.0 2.00 WFM-353950-35
18.0 20.0 26.0 12.0 1.00 WFM-1820-12 38.0 +0.150 42.0 50.0 22.0 2.00 WFM-3842-22
18.0 20.0 26.0 17.0 1.00 WFM-1820-17 40.0 44.0 52.0 30.0 2.00 WFM-4044-30
18.0 20.0 26.0 22.0 1.00 WFM-1820-22 40.0 44.0 52.0 40.0 2.00 WFM-4044-40 Dimensions according to ISO 3547-1 Imperial dimensions available
20.0 23.0 30.0 11.5 1.50 WFM-2023-11 45.0 50.0 58.0 50.0 2.00 WFM-4550-50 and special dimensions From page 1446
20.0 23.0 30.0 14.5 1.50 WFM-2023-14 50.0 55.0 63.0 40.0 2.00 WFM-5055-40
20.0 23.0 30.0 16.5 1.50 WFM-2023-16 50.0 55.0 63.0 50.0 2.00 WFM-5055-50 Dimensions [mm]
20.0 23.0 30.0 21.5 1.50 WFM-2023-21 55.0 60.0 68.0 60.0 2.00 WFM-5560-60 d1 d2 s d4 d5 h d6 Part No.
24.0 27.0 32.0 10.5 1.50 WFM-2427-10 57.0 62.0 67.0 40.0 2.00 WFM-5762-40 +0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12
25.0 28.0 35.0 11.5 1.50 WFM-2528-11 60.0 65.0 73.0 60.0 2.00 WFM-6065-60 +0.12 +0.125 –0.2
+0.040 +0.060
25.0 28.0 35.0 16.5 1.50 WFM-2528-16 65.0 70.0 78.0 60.0 2.00 WFM-6570-60 5.0 9.5 0.6 4) 4)
0.3 9.5 WTM-0509-006
+0.124 +0.180
25.0 28.0 35.0 21.0 1.50 WFM-2528-21 70.0 75.0 83.0 100.0 2.50 WFM-7075-100 6.0 20.0 1.5 13.0 1.5 1.0 20.0 WTM-0620-015
25.0 28.0 32.0 30.0 1.50 WFM-2528-30 75.0 80.0 88.0 100.0 2.50 WFM-7580-100 8.0 18.0 1.5 13.0 1.5 1.0 18.0 WTM-0818-015
25.0 28.0 31.0 13.5 1.50 WFM-252831-13 80.0 85.0 93.0 100.0 2.50 WFM-8085-100 10.0 18.0 1.0 4) 4)
0.7 18.0 WTM-1018-010
28.0 30.0 35.0 36.0 1.00 WFM-2830-36 90.0 95.0 103.0100.0 2.50 WFM-9095-100 10.0 18.0 1.5 4) 4)
1.0 18.0 WTM-1018-015
+0.072
30.0 34.0 42.0 10.0 2.00 WFM-3034-10 100.0 105.0113.0100.0 2.50 WFM-100105-100 12.0 24.0 1.5 18.0 1.5 1.0 24.0 WTM-1224-015
+0.212
30.0 34.0 42.0 16.0 2.00 WFM-3034-16 120.0 125.0133.0100.0 2.50 WFM-120125-100 14.0 26.0 1.5 20.0 2.0 1.0 26.0 WTM-1426-015
3)
After press-fit. Testing methods Page 57 15.0 24.0 1.5 19.5 1.5 1.0 24.0 WTM-1524-015
16.0 30.0 1.5 23.0 2.0 1.0 30.0 WTM-1630-015
18.0 32.0 1.5 25.0 2.0 1.0 32.0 WTM-1832-015
18.0 44.0 1.5 30.0 7.0 1.0 44.0 WTM-1844-015
20.0 36.0 1.5 28.0 3.0 1.0 36.0 WTM-2036-015
22.0 38.0 1.5 30.0 3.0 1.0 38.0 WTM-2238-015
24.0 42.0 1.5 33.0 3.0 1.0 42.0 WTM-2442-015
26.0 44.0 1.5 35.0 3.0 1.0 44.0 WTM-2644-015
28.0 40.0 1.5 38.0 4.0 1.0 48.0 WTM-2840-015
28.0 48.0 1.5 38.0 4.0 1.0 48.0 WTM-2848-015
32.0 54.0 1.5 43.0 4.0 1.0 54.0 WTM-3254-015
38.0 62.0 1.5 50.0 4.0 1.0 62.0 WTM-3862-015
42.0 66.0 1.5 54.0 4.0 1.0 66.0 WTM-4266-015
48.0 74.0 2.0 61.0 4.0 1.5 74.0 WTM-4874-020
52.0 78.0 2.0 65.0 4.0 1.5 78.0 WTM-5278-020
Couldn't find your size? 62.0 90.0 2.0 76.0 4.0 1.5 90.0 WTM-6290-020
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your 82.0 110.0 2.0 4) 4)
1.5 110.0 WTM-82110-020
application? Please call us. igus® listens to your needs and provides you a solution very quickly. 102.0 130.0 2.0 4) 4)
1.5 130.0 WTM-102130-020
120.0 150.0 2.0 4) 4)
1.5 150.0 WTM-120150-020
Even more dimensions from stock 4)
Design without fixing bore
More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
162 Online tools and more information www.igus.eu/w300 3D-CAD files, prices and delivery time online www.igus.eu/w300 163
iglidur®
W300 My sketches
Load [MPa]
iglidur® W300, page 153 the wear resistance of the material do not change.
0.1
Typical application areas Medium Resistance
Available from stock 0.001 0.01 0.1 1.0 10.0
●● Automation Surface speed [m/s] Alcohol +
Detailed information about delivery time online.
●● Printing industry Diagram 01: Permissible pv values for iglidur® J3 bearings Hydrocarbons +
●● Beverage technology with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
Block pricing online
●● Glass industry shaft, at +20 °C, mounted in a steel housing Fuels +
No minimum order value. From batch size 1.
●● Aerospace engineering Diluted acids 0 to –
Moisture absorption Strong acids –
Max. +90 °C
The moisture absorption of iglidur® J3 plain bearings in Diluted alkalines +
Min. –50 °C
standard climatic conditions is approximately 0.3 % weight. Strong alkalines + to 0
The saturation limit submerged in water is 1.3 % weight.
Ø 2–50 mm + resistant 0 conditionally resistant – not resistant
Due to these low values considering expansion by moisture
More dimensions upon request All data given at room temperature [+20 °C]
absorption is only required in extreme cases.
Table 02: Chemical resistance
Imperial dimensions available Diagram, www.igus.eu/j3-moisture
From page 1391 Chemical table, page 1478
Vacuum
In vacuum, any absorbed moisture content is outgassed.
Online product finder
Only dehumidified iglidur® J3 bearings are suitable for
www.igus.eu/iglidur-finder
vacuum.
166 Online tools and more information www.igus.eu/j3 3D-CAD files, prices and delivery time online www.igus.eu/j3 167
J3 J3
+90 °C iglidur J3 | Technical data
®
iglidur J3 | Technical data ® +90 °C
45 MPa 45 MPa
0.25 45
With respect to its general mechanical and thermal speci- Permissible surface speeds 40
fications, iglidur® J3 is directly comparable to our classic, iglidur® J3 is also suitable for medium to high surface 35
iglidur® J. speeds. The maximum values shown in table 03 can only
Wear [µm/km]
With increasing temperatures, the compressive strength of levels. In practice, though, this temperature level is rarely 0.15 15
10
iglidur® J3 plain bearings decreases. The diagram 02 shows reached, due to varying application conditions.
5
this inverse relationship. The recommended maximum
0.10 0
surface pressure is a mechanical material parameter. No Surface speed, page 44 0 15 25 35 45 0 5 10 15 20 25 30 35 40 45
conclusions regarding the tribological properties can be Load [MPa] Load [MPa]
drawn from this. m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
Continuous 1.5 1.1 8 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
90 Short-term 3 2.1 10 steel, as a function of the pressure
80
70
Table 03: Maximum surface speeds
60 Shaft materials Installation tolerances
50 The friction and wear are also dependent, to a large iglidur® J3 plain bearings are standard bearings for shafts
40 Temperatures degree, on the shaft material. Shafts that are too smooth, with h-tolerance (recommended minimum h9). The bearings
30 The temperatures prevailing in the bearing system also increase both the coefficient of friction and the wear of the are designed for pressfit into a housing machined to a
Load [MPa]
20
have an influence on the bearing wear. With increasing bearing. For iglidur® J3 a ground surface with an average H7 tolerance. After being assembled into a nominal size
10
temperatures, the wear increases and this effect is significant roughness Ra = 0.1–0.3 μm is recommended. The diagram housing, the inner diameter automatically adjusts to the
0
20 30 40 50 60 70 80 90 when temperatures rise over +90 °C. At temperatures over 06 shows that iglidur® J3 can be combined with various E10 tolerances. For particular dimensions the tolerance
Temperature [°C] +60 °C an additional securing is required. shaft materials. Diagram 07 shows rotating and oscillating differs depending on the wall thickness (please see product
Diagram 02: Permissible maximum surface pressure of tests in comparison. With higher load, the wear increases range table). In relation to the installation tolerance, the inner
as a function of temperature (45 MPa at +20 °C) Application temperatures, page 49 more for rotating than for oscillating movements. diameter changes with the absorption of humidity.
Additional securing, page 49
Shaft materials, page 52 Testing methods, page 57
Diagram 03 shows the elastic deformation of iglidur J3 ®
at radial loads. At the maximum recommended surface Friction and wear iglidur® J3 Dry Greases Oil Water Diameter Shaft iglidur® J3 Housing
pressure of 45 MPa at room temperature the deformation Similar to wear resistance, the coefficient of friction μ also C. o. f. µ 0.06 – 0.20 0.09 0.04 0.04 d1 [mm] h9 [mm] E10 [mm] H7 [mm]
is less than 6 %. A possible deformation could be, among changes with the load (diagram 04 and 05). up to 3 0–0.025 +0.014 +0.054 0 +0.010
Table 04: Coefficient of friction against steel (Ra = 1µm,
others, dependant on the duty cycle of the load. > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
50 HRC)
Coefficients of friction and surfaces, page 47 > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Surface pressure, page 41 Wear resistance, page 50 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
1.6
> 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
1.4
> 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
1.2
> 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
10 0.25
HR carbon steel
8
H.a. aluminium
7 0.6 Table 05: Important tolerances for plain bearings
Wear [µm/km]
Coefficient of friction [µ]
0.20
6
0.4 according to ISO 3547-1 after pressfit
304 SS
5
Cf53
Deformation [%]
0.2
4
0.15 0.0
3
2 Diagram 06: Wear, rotating with different shaft materials,
1
p = 1 MPa, v = 0.3 m/s
0 0.10
0 5 10 15 20 25 30 35 40 45 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
168 Online tools and more information www.igus.eu/j3 3D-CAD files, prices and delivery time online www.igus.eu/j3 169
J3SM iglidur® J3 | Product range iglidur® J3 | Product range J3SM
30°
d1- d1-
Tolerance 3) h13 Tolerance 3) h13
Type Dimensions [mm]
28.0 32.0 30.0 J3SM-2832-30 40.0 44.0 30.0 J3SM-4044-30
30.0 34.0 20.0 J3SM-3034-20 40.0 44.0 40.0 J3SM-4044-40
d1
d2
0.5 +0.040
30.0 34.0 25.0 J3SM-3034-25 40.0 44.0 50.0 J3SM-4044-50
+0.124
30.0 34.0 30.0 J3SM-3034-30 45.0 50.0 20.0 J3SM-4550-20
30°
iglidur® material
30.0 34.0 40.0 J3SM-3034-40 45.0 50.0 30.0 J3SM-4550-30
b1
32.0 36.0 20.0 J3SM-3236-20 45.0 +0.050 50.0 40.0 J3SM-4550-40
Outer-Ø d2
Inner-Ø d1
Length b1
32.0 36.0 30.0 J3SM-3236-30 45.0 +0.150 50.0 50.0 J3SM-4550-50
Form S
Metric
32.0 36.0 40.0 J3SM-3236-40 50.0 55.0 20.0 J3SM-5055-20
2)
Thickness < 1 mm: chamfer = 20° 35.0 +0.050 39.0 20.0 J3SM-3539-20 50.0 55.0 30.0 J3SM-5055-30
35.0 +0.150 39.0 30.0 J3SM-3539-30 50.0 55.0 40.0 J3SM-5055-40
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 35.0 39.0 40.0 J3SM-3539-40 50.0 55.0 50.0 J3SM-5055-50
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 35.0 39.0 50.0 J3SM-3539-50 50.0 55.0 60.0 J3SM-5055-60
f [mm]: 0.3 0.5 0.8 1.2 40.0 44.0 20.0 J3SM-4044-20
Imperial dimensions available
From page 1409 3)
After press-fit. Testing methods Page 57
Dimensions [mm]
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No.
Tolerance3) h13 Tolerance3) h13
+0.014 15.0 17.0 25.0 J3SM-1517-25
3.0 4.5 5.0 J3SM-0304-05
+0.054 15.0 17.0 30.0 J3SM-1517-30
4.0 5.5 4.0 J3SM-0405-04 16.0 18.0 15.0 J3SM-1618-15
4.0 5.5 6.0 J3SM-0405-06 16.0 18.0 20.0 J3SM-1618-20
+0.032
5.0 7.0 5.0 J3SM-0507-05 16.0 18.0 25.0 J3SM-1618-25
+0.020 +0.102
5.0 7.0 10.0 J3SM-0507-10 18.0 20.0 15.0 J3SM-1820-15
+0.068
6.0 8.0 6.0 J3SM-0608-06 18.0 20.0 20.0 J3SM-1820-20
6.0 8.0 8.0 J3SM-0608-08 18.0 20.0 25.0 J3SM-1820-25
6.0 8.0 10.0 J3SM-0608-10 18.0 21.0 25.0 J3SM-1821-25
8.0 10.0 8.0 J3SM-0810-08 20.0 23.0 10.0 J3SM-2023-10
8.0 10.0 10.0 J3SM-0810-10 20.0 23.0 15.0 J3SM-2023-15
8.0 10.0 12.0 J3SM-0810-12 20.0 23.0 20.0 J3SM-2023-20
10.0 +0.025 12.0 8.0 J3SM-1012-08 20.0 23.0 25.0 J3SM-2023-25
10.0 +0.083 12.0 10.0 J3SM-1012-10 20.0 23.0 30.0 J3SM-2023-30
10.0 12.0 12.0 J3SM-1012-12 22.0 25.0 15.0 J3SM-2225-15
10.0 12.0 15.0 J3SM-1012-15 22.0 25.0 20.0 J3SM-2225-20
10.0 12.0 10.0 J3SM-1012-20 22.0 25.0 25.0 J3SM-2225-25
12.0 14.0 10.0 J3SM-1214-10 22.0 25.0 30.0 J3SM-2225-30
+0.040
12.0 14.0 12.0 J3SM-1214-12 24.0 27.0 15.0 J3SM-2427-15
+0.124
12.0 14.0 15.0 J3SM-1214-15 24.0 27.0 20.0 J3SM-2427-20
12.0 14.0 20.0 J3SM-1214-20 24.0 27.0 25.0 J3SM-2427-25
13.0 15.0 10.0 J3SM-1315-10 24.0 27.0 30.0 J3SM-2427-30
+0.032 Couldn't find your size?
13.0 15.0 20.0 J3SM-1315-20 25.0 28.0 15.0 J3SM-2528-15
+0.102 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
14.0 16.0 15.0 J3SM-1416-15 25.0 28.0 20.0 J3SM-2528-20
14.0 16.0 20.0 J3SM-1416-20 25.0 28.0 25.0 J3SM-2528-25 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
14.0 16.0 25.0 J3SM-1416-25 25.0 28.0 30.0 J3SM-2528-30
15.0 17.0 15.0 J3SM-1517-15 28.0 32.0 20.0 J3SM-2832-20 Even more dimensions from stock
15.0 17.0 20.0 J3SM-1517-20 28.0 32.0 25.0 J3SM-2832-25 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
170 Online tools and more information www.igus.eu/j3 3D-CAD files, prices and delivery time online www.igus.eu/j3 171
J3FM iglidur® J3 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
Load [MPa]
●● When a cost-effective bearing with a low
radiation.
friction is needed
iglidur® D, page 229 0.1
Available from stock Medium Resistance
iglidur® R, page 221 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Surface speed [m/s] Alcohol +
●● With high rotational speeds
Diagram 01: Permissible pv values for iglidur® J350 Hydrocarbons + to 0
iglidur® J, page 141
Block pricing online bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
No minimum order value. From batch size 1. a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Typical application areas
●● Automation Diluted acids +
Max. +180 °C Strong acids + to 0
●● Machine building Moisture absorption
Min. –100 °C Diluted alkalines +
●● Automotive The moisture absorption of iglidur® J350 is low and can
●● Glass industry be ignored when using standard-bearings. Even when Strong alkalines +
Ø 4–50 mm
saturated with water, iglidur® J350 does not absorb more + resistant 0 conditionally resistant – not resistant
More dimensions upon request
than 1.6 % weight of water. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Imperial dimensions available Diagram, www.igus.eu/j350-moisture
From page 1391
Vacuum Chemical table, page 1478
iglidur® J350 plain bearings outgas to a very limited extent.
Online product finder
Use in vacuum is possible with dehumidified bearings.
www.igus.eu/iglidur-finder
174 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 175
J350 J350
+180 °C iglidur J350 | Technical data
®
iglidur J350 | Technical data ® +180 °C
60 MPa 60 MPa
0.40 3.0
iglidur® J350 blends universally good wear resistance, flexi- Permissible surface speeds
bility and temperature resistance into a very versatile iglidur® iglidur® J350 bearings are suitable for low and medium speeds 2.5
0.30
material with a broad application spectrum. in rotating and oscillating use. The wear rates are much
HR carbon steel
Mechanical properties
H.a. aluminium
well mounted with iglidur® J350.
Wear [µm/km]
With increasing temperatures, the compressive strength 1.0
Surface speed, page 44 0.10
304 SS
of iglidur® J350 plain bearings decreases. The diagram 0.5
Cf53
02 shows this inverse relationship. The recommended m/s Rotating Oscillating Linear 0.00 0.0
maximum surface pressure is a mechanical material para Continuous 1.3 1 4 0 10 20 30 40 50 60 Diagram 07: Wear, rotating with different shaft materials,
meter. No conclusions regarding the tribological properties Short-term 3 2.3 8 Load [MPa]
pressure, p = 1 MPa, v = 0.3 m/s
can be drawn from this. Diagram 05: Coefficient of friction as a function of the
Table 03: Maximum surface speeds
pressure, v = 0.01 m/s
80
Temperatures Shaft materials Installation tolerances
The temperatures prevailing in the bearing system also Diagrams 06 and 07 show results of testing different shaft iglidur® J350 plain bearings are standard bearings for
60
have an influence on the bearing wear. The wear-rate of materials with plain bearings made from iglidur® J350. shafts with h-tolerance (recommended minimum h9). The
iglidur® J350 bearings changes very little at high tem iglidur® plain bearings can be combined with various shaft bearings are designed for pressfit into a housing machined
40
peratures. In some cases, the wear even decreases at materials. One shaft – bearing combination stands out when to a H7 tolerance. After being assembled into a nominal size
+100 °C. At temperatures over +140 °C an additional looking at the wear results of the test: iglidur® J350 with soft housing, in standard cases the inner diameter automatically
Load [MPa]
20
securing is required. 304 stainless steel. Not many bearing materials are suitable adjusts to the F10 tolerances. For particular dimensions the
for use with this rather difficult soft stainless steel material tolerance differs depending on the wall thickness (please
0 Application temperatures, page 49
20 40 60 80 100 120 140 160 180 (304 stainless steel) and achieve good wear results. Also, see product range table).
Additional securing, page 49
Temperature [°C] good properties are reached with hard anodised aluminium
Diagram 02: Recommended maximum surface pressure shafts. If the shaft material you plan to use is not contained Testing methods, page 57
of as a function of temperature (60 MPa at +20 °C) Friction and wear in this list, please contact us.
The coefficients of friction of iglidur® J350 in dry operation Diameter Shaft iglidur® J350 Housing
against steel lie in a very good range. They decrease significantly Shaft materials, page 52 d1 [mm] h9 [mm] F10 [mm] H7 [mm]
iglidur® J350 bearings are adequate for medium and high loads.
at higher surface speeds. This benefits the service life of the up to 3 0–0.025 +0.006 +0.046 0 +0.010
Diagram 03 shows the elastic deformation of iglidur® J350
bearings in continuous operations with high surface speeds. iglidur® J350 Dry Greases Oil Water > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
under different loads. It shows the material behaviour sub-
Diagram 04 shows this inverse relationship. Especially C. o. f. µ 0.1–0.2 0.09 0.04 0.04 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
mitted to a short-term load. The surrounding temperatures
with loads larger than 2 MPa, the iglidur® J350 bearings > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
are only noticeable at 60 MPa. Table 04: Coefficient of friction against steel (Ra = 1µm,
are clearly superior to other bearings in rotating applications. > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
50 HRC)
Surface pressure, page 41 Coefficients of friction and surfaces, page 47 > 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
Wear resistance, page 50 0.40
> 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
0.35
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
4
0.15
3 0.20
Deformation [%]
0.00
2
0.15 0.4 0.6 0.8 1.0 1.2 1.4 1.6
1 Shaft roughness Ra [µm]
Diagram 06: Coefficient of friction as function of the
0 0.10
0 10 20 30 40 50 60 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 shaft surface (Cf53 hardened and ground steel)
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1 MPa
176 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 177
J350SM iglidur® J350 | Product range iglidur® J350 | Product range J350SM
30°
d1- d1-
Tolerance 3) h13 Tolerance 3) h13
Type Dimensions [mm]
30.0 34.0 25.0 J350SM-3034-25 40.0 44.0 40.0 J350SM-4044-40
+0.020
30.0 34.0 30.0 J350SM-3034-30 40.0 44.0 50.0 J350SM-4044-50
d1
d2
0.5 +0.104
30.0 34.0 40.0 J350SM-3034-40 45.0 50.0 20.0 J350SM-4550-20
32.0 36.0 20.0 J350SM-3236-20 45.0 50.0 30.0 J350SM-4550-30
30°
iglidur® material
32.0 36.0 30.0 J350SM-3236-30 45.0 50.0 40.0 J350SM-4550-40
b1 +0.025
32.0 36.0 40.0 J350SM-3236-40 45.0 50.0 50.0 J350SM-4550-50
Outer-Ø d2
Inner-Ø d1
+0.125
Length b1
35.0 39.0 20.0 J350SM-3539-20 50.0 55.0 20.0 J350SM-5055-20
+0.025
Form S
Metric
35.0 39.0 30.0 J350SM-3539-30 50.0 55.0 30.0 J350SM-5055-30
2)
Thickness < 1 mm: chamfer = 20° +0.125
35.0 39.0 40.0 J350SM-3539-40 50.0 55.0 40.0 J350SM-5055-40
35.0 39.0 50.0 J350SM-3539-50 50.0 55.0 50.0 J350SM-5055-50
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 40.0 44.0 20.0 J350SM-4044-20 50.0 55.0 60.0 J350SM-5055-60
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 40.0 44.0 30.0 J350SM-4044-30
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available 3)
After press-fit. Testing methods Page 57
From page 1410
Dimensions [mm]
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No.
Tolerance3) h13 Tolerance3) h13
4.0 5.5 4.0 J350SM-0405-04 16.0 18.0 15.0 J350SM-1618-15
4.0 5.5 6.0 J350SM-0405-06 16.0 18.0 20.0 J350SM-1618-20
5.0 7.0 5.0 J350SM-0507-05 16.0 +0.016 18.0 25.0 J350SM-1618-25
+0.010
5.0 7.0 10.0 J350SM-0507-10 18.0 +0.086 20.0 15.0 J350SM-1820-15
+0.058
6.0 8.0 6.0 J350SM-0608-06 18.0 20.0 20.0 J350SM-1820-20
6.0 8.0 8.0 J350SM-0608-08 18.0 20.0 25.0 J350SM-1820-25
6.0 8.0 10.0 J350SM-0608-10 20.0 23.0 10.0 J350SM-2023-10
8.0 10.0 8.0 J350SM-0810-08 20.0 23.0 15.0 J350SM-2023-15
8.0 10.0 10.0 J350SM-0810-10 20.0 23.0 20.0 J350SM-2023-20
8.0 10.0 12.0 J350SM-0810-12 20.0 23.0 25.0 J350SM-2023-25
10.0 +0.013 12.0 8.0 J350SM-1012-08 20.0 23.0 30.0 J350SM-2023-30
10.0 +0.071 12.0 10.0 J350SM-1012-10 22.0 25.0 15.0 J350SM-2225-15
10.0 12.0 12.0 J350SM-1012-12 22.0 25.0 20.0 J350SM-2225-20
10.0 12.0 15.0 J350SM-1012-15 22.0 25.0 25.0 J350SM-2225-25
10.0 12.0 20.0 J350SM-1012-20 22.0 25.0 30.0 J350SM-2225-30
12.0 14.0 10.0 J350SM-1214-10 24.0 27.0 15.0 J350SM-2427-15
12.0 14.0 12.0 J350SM-1214-12 24.0 +0.020 27.0 20.0 J350SM-2427-20
12.0 14.0 15.0 J350SM-1214-15 24.0 +0.104 27.0 25.0 J350SM-2427-25
12.0 14.0 20.0 J350SM-1214-20 24.0 27.0 30.0 J350SM-2427-30
13.0 15.0 10.0 J350SM-1315-10 25.0 28.0 15.0 J350SM-2528-15
13.0 15.0 20.0 J350SM-1315-20 25.0 28.0 20.0 J350SM-2528-20
+0.016
14.0 16.0 15.0 J350SM-1416-15 25.0 28.0 25.0 J350SM-2528-25
+0.086 Couldn't find your size?
14.0 16.0 20.0 J350SM-1416-20 25.0 28.0 30.0 J350SM-2528-30
14.0 16.0 25.0 J350SM-1416-25 25.0 28.0 45.0 J350SM-2528-45 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
15.0 17.0 15.0 J350SM-1517-15 28.0 32.0 20.0 J350SM-2832-20 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
15.0 17.0 20.0 J350SM-1517-20 28.0 32.0 25.0 J350SM-2832-25
15.0 17.0 25.0 J350SM-1517-25 28.0 32.0 30.0 J350SM-2832-30 Even more dimensions from stock
16.0 18.0 4.0 J350SM-1618-04 30.0 34.0 20.0 J350SM-3034-20 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
178 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 179
J350FM iglidur® J350 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
12.0 14.0 20.0 9.0 1.0 J350FM-1214-09 30.0 34.0 42.0 26.0 2.0 J350FM-3034-26
12.0 14.0 20.0 12.0 1.0 J350FM-1214-12 30.0 34.0 42.0 37.0 2.0 J350FM-3034-37
12.0 14.0 20.0 17.0 1.0 J350FM-1214-17 35.0 39.0 47.0 16.0 2.0 J350FM-3539-16 Very good c. o. f. for low or medium loads
+0.016
14.0 16.0 22.0 12.0 1.0 J350FM-1416-12 35.0 39.0 47.0 26.0 2.0 J350FM-3539-26
14.0
+0.086
16.0 22.0 17.0 1.0 J350FM-1416-17 40.0
+0.025
44.0 52.0 30.0 2.0 J350FM-4044-30 Good media-resistance
+0.125
15.0 17.0 23.0 9.0 1.0 J350FM-1517-09 40.0 44.0 52.0 40.0 2.0 J350FM-4044-40
15.0 17.0 23.0 12.0 1.0 J350FM-1517-12 45.0 50.0 58.0 50.0 2.0 J350FM-4550-50 Slightly higher temperature rating than iglidur® J
15.0 17.0 23.0 17.0 1.0 J350FM-1517-17
3)
After press-fit. Testing methods Page 57
Long life time – even on polymer shafts and
other special cases
Lubrication and maintenance-free
Couldn't find your size?
Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
Standard range from stock
application? Please call us. igus® listens to your needs and provides you a solution very quickly.
Load [MPa]
Typical application areas Medium Resistance
0.1
●● Automation 0.001 0.01 0.1 1.0 10.0 Alcohol + to 0
●● Plant construction Surface speed [m/s] Hydrocarbons +
●● Test engineering and quality assurance Diagram 01: Permissible pv values for iglidur® J260 Greases, oils without additives 0 to –
●● Robotics bearings with a wall thickness of 1 mm dry running against Fuels –
Available from stock
●● Electronics industry a steel shaft, at +20 °C, mounted in a steel housing Diluted acids –
Detailed information about delivery time online.
Strong acids –
Moisture absorption Diluted alkalines + to 0
Block pricing online
The moisture absorption of iglidur® J260 plain bearings in Strong alkalines + to 0
No minimum order value. From batch size 1.
standard climatic conditions is approximately 0.2 % weight.
+ resistant 0 conditionally resistant – not resistant
The saturation limit submerged in water is 0.4 % weight.
Max. +120 °C All data given at room temperature [+20 °C]
Due to these low values considering expansion by moisture
Min. –100 °C Table 02: Chemical resistance
absorption is only required in extreme cases.
182 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 183
J260 J260
+120 °C iglidur J260 | Technical data
®
iglidur J260 | Technical data ® +120 °C
40 MPa 40 MPa
0.25 120
Similar to the classic, iglidur® J, iglidur® J260 is an endu- Permissible surface speeds
rance runner with outstanding wear behaviour, but provides iglidur® J260 has been developed for low to medium surface 100
0.20 rotating oscillating
increased reserves at its long-term application temperature speeds. The maximum values shown in table 03 can only be
Wear [µm/km]
Mechanical properties levels. In practice, though, this temperature level is rarely 40
0.10
With increasing temperatures, the compressive strength reached due to varying application conditions. 20
of iglidur® J260 plain bearings decreases. The diagram 02
Surface speed, page 44 0.00 0
shows this inverse relationship. The permissible maximum 0 10 20 30 40 0 5 10 15 20 25 30 35 40
surface pressure is a mechanical material parameter. No m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be Continuous 1 0.7 3 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Short-term 2 1.4 4 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
steel, as a function of the pressure
Table 03: Maximum surface speeds
60
0.20 2.5
HR carbon steel
H.a. aluminium
1
Wear [µm/km]
1.0
304 SS
0 0.10 0.5 Cf53
0.0 12.5 25.0 37.5 50.0 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s] 0.0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa p = 1 MPa, v = 0.3 m/s
184 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 185
J260SM iglidur® J260 | Product range iglidur® J260 | Product range J260FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
6.0 +0.020 +0.068 8.0 6.0 J260SM-0608-06 6.0 +0.020 +0.068 8.0 12.0 6.0 1.0 J260FM-0608-06
8.0 +0.025 +0.083 10.0 6.0 J260SM-0810-06 8.0 +0.025 +0.083 10.0 15.0 10.0 1.0 J260FM-0810-10
8.0 +0.025 +0.083 10.0 10.0 J260SM-0810-10 10.0 +0.025 +0.083 12.0 18.0 10.0 1.0 J260FM-1012-10
10.0 +0.025 +0.083 12.0 10.0 J260SM-1012-10 12.0 +0.032 +0.102 14.0 20.0 12.0 1.0 J260FM-1214-12
12.0 +0.032 +0.102 14.0 12.0 J260SM-1214-12 16.0 +0.032 +0.102 18.0 24.0 17.0 1.0 J260FM-1618-17
12.0 +0.032 +0.102 14.0 15.0 J260SM-1214-15 20.0 +0.040 +0.124 23.0 30.0 21.5 1.5 J260FM-2023-21
16.0 +0.032 +0.102 18.0 15.0 J260SM-1618-15 3)
After press-fit. Testing methods Page 57
16.0 +0.032 +0.102 18.0 13.5 J260SM-1618-135
18.0 +0.032 +0.102 20.0 12.0 J260SM-1820-12
18.0 +0.032 +0.102 20.0 20.0 J260SM-1820-20
20.0 +0.040 +0.124 23.0 20.0 J260SM-2023-20
3)
After press-fit. Testing methods Page 57
186 Online tools and more information www.igus.eu/j350 3D-CAD files, prices and delivery time online www.igus.eu/j350 187
iglidur®
J260 My sketches
Extremely wear-resistant
Continuous use up to +180 °C
Suitable for wet environments
Good price/performance ratio
Lubrication and maintenance-free
Standard range from stock
Load [MPa]
radiation.
iglidur® H370, page 305
0.1 Medium Resistance
Typical application areas 0.001 0.01 0.1 1.0 10.0
●● Material handling Surface speed [m/s]
Alcohol 0 to –
●● Automation Diagram 01: Permissible pv values for iglidur® W360 Hydrocarbons +
Available from stock Greases, oils without additives +
●● Two-wheel technology bearings with a wall thickness of 1 mm dry running against
Detailed information about delivery time online. Fuels +
●● Electromobility a steel shaft, at +20 °C, mounted in a steel housing
Diluted acids 0 to –
Block pricing online Strong acids 0 to –
Moisture absorption
No minimum order value. From batch size 1. Diluted alkalines +
The moisture absorption of iglidur® W360 is low and can
be disregarded when used in a humid environment. With Strong alkalines +
Max. +180 °C
a full saturation of 1.6 % weight, however, underwater use + resistant 0 conditionally resistant – not resistant
Min. –40 °C
is only possible to a very restricted extent. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Ø 6–20 mm Diagram, www.igus.eu/w360-moisture
More dimensions upon request
Vacuum Chemical table, page 1478
In a vacuum, iglidur® W360 bearing outgases only to a very
Online product finder
small extent. Use in vacuum is possible with dehumidified
www.igus.eu/iglidur-finder
bearings.
190 Online tools and more information www.igus.eu/w360 3D-CAD files, prices and delivery time online www.igus.eu/w360 191
W360 W360
+180 °C iglidur W360 | Technical data
®
iglidur W360 | Technical data ® +180 °C
75 MPa 75 MPa
0.25 5
Low moisture absorption and high temperature resistance Permissible surface speeds
result in an extremely broad range of uses for this extremely iglidur® W360 bearings are suitable for low to medium 0.20 4
wear resistant material. speeds in both rotating and oscillating applications. Even
H.a. aluminium
0.10 2
Wear [µm/km]
With increasing temperatures, the compressive strength Surface speed, page 44
304 SS
of iglidur® W360 plain bearings decreases. The diagram 0.05 1
Cf53
02 shows this inverse relationship. At +180 °C the surface m/s Rotating Oscillating Linear 0.00 0
pressure is still 10 MPa. The recommended maximum Continuous 1.2 0.9 3.0 0 10 20 30 40 50 60 70 Diagram 07: Wear, rotating with different shaft materials,
surface pressure is a mechanical material parameter. No Short-term 2.7 2.0 5.0 Load [MPa]
p = 1 MPa, v = 0.3 m/s
conclusions regarding the tribological properties can be Diagram 05: Coefficient of friction as a function of the
Table 03: Maximum surface speeds
drawn from this. pressure, v = 0.01 m/s
Temperatures
80 The temperature resistance makes iglidur® W360 a very Shaft materials Installation tolerances
universal material for plain bearings in different industries. In the case of iglidur® W360, the shaft’s surface finish iglidur® W360 plain bearings are standard bearings for
60 Application temperatures up to +200 °C are permitted on has practically no effect on the coefficient of friction in the shafts with h-tolerance (recommended minimum h9). The
the short-term. Please note that from +90 °C the press-in range of up to 1.6 MPa (diagram 06). Diagram 07 shows bearings are designed for pressfit into a housing machined
40 fastening of the bearings is not sufficient and an additional an extract of results of tests with different shaft materials. to a H7 tolerance. After being assembled into a nominal
securing of the bearing is required. iglidur® W360 bearings are suitable for all gliding partners. size housing, the inner diameter automatically adjusts to
Load [MPa]
20 During rotation with a load of 1 MPa, all aluminium hc, Cf53 the E10 tolerances.
Application temperatures, page 49 and stainless steel shafts stand out. A similar picture also
0 Additional securing, page 49 exists with other loads or pivoting movements. Testing methods, page 57
20 40 60 80 100 120 140 160 180 If the shaft material you plan on using is not shown in these
Temperature [°C]
Friction and wear test results, please contact us. Diameter Shaft iglidur® W360 Housing
Diagram 02: Permissible maximum surface pressure of
The coefficients of friction of iglidur W360 in dry operation
®
d1 [mm] h9 [mm] E10 [mm] H7 [mm]
as a function of temperature (75 MPa at +20 °C)
against steel lie in a very good range. They constantly remain Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
at a low level regardless of the speed. The Diagram 04 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
iglidur® W360 bearings are suitable for a broad range of shows this inverse relationship. As the load increases, the iglidur® W360 Dry Greases Oil Water > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
loads. Diagram 03 shows the deformation under tempera- coefficient of friction decreases. The correlation is especially C. o. f. µ 0.07–0.21 0.09 0.04 0.04 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
ture. It shows the material behaviour submitted to a short- strong up to approx. 15 MPa (diagram 05). > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Table 04: Coefficient of friction against steel (Ra = 1µm,
term load. > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
50 HRC)
Coefficients of friction and surfaces, page 47 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Surface pressure, page 41 Wear resistance, page 50
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
4.0 0.25 0.20
3.5
+23 °C +60 °C 0.20 0.16
3.0
Coefficient of friction [µ]
1.0
0.05 0.04
0.5
0.0 0.00 0.00
0 25 50 75 100 125 150 0 0.3 0.6 0.9 1.2 1.5 0.4 0.6 0.8 1.0 1.2 1.4 1.6
Load [MPa] Surface speed [m/s] Shaft roughness Ra [µm]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Coefficient of friction as function of the
surface speed, p = 1 MPa shaft surface (Cf53 hardened and ground steel)
192 Online tools and more information www.igus.eu/w360 3D-CAD files, prices and delivery time online www.igus.eu/w360 193
W360SM iglidur® W360 | Product range iglidur® W360 | Product range W360FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
194 Online tools and more information www.igus.eu/w360 3D-CAD files, prices and delivery time online www.igus.eu/w360 195
iglidur®
W360 My sketches
Load [MPa]
●● Optical industry
UV resistance
●● Test engineering and quality assurance
When subjected to UV radiation, iglidur® L250 plain bearings
0.1
0.001 0.01 0.1 1.0 10.0 change colour. Their properties, however, are not affected.
Surface speed [m/s]
Diagram 01: Permissible pv values for iglidur® L250 Medium Resistance
Available from stock bearings with a wall thickness of 1 mm dry running against Alcohol + to 0
Detailed information about delivery time online. a steel shaft, at +20 °C, mounted in a steel housing Hydrocarbons +
Greases, oils without additives +
Block pricing online Moisture absorption Fuels +
No minimum order value. From batch size 1. With regard to applications where the smallest bearing clea- Diluted acids 0 to –
rances are concerned, please take the moisture absorption Strong acids –
Max. +90 °C into consideration. Diluted alkalines +
Min. –40 °C Strong alkalines 0
Diagram, www.igus.eu/l250-moisture
+ resistant 0 conditionally resistant – not resistant
Ø 6–20 mm Vacuum
All data given at room temperature [+20 °C]
More dimensions upon request In vacuum, any absorbed moisture content is outgassed.
Table 02: Chemical resistance
Therefore, only dehumidified bearings of iglidur® L250 are
Online product finder suitable for a vacuum application. Chemical table, page 1478
www.igus.eu/iglidur-finder
198 Online tools and more information www.igus.eu/l250 3D-CAD files, prices and delivery time online www.igus.eu/l250 199
L250 L250
+90 °C iglidur L250 | Technical data
®
iglidur L250 | Technical data ® +90 °C
45 MPa 45 MPa
0.7 200
iglidur® L250 is a bearing material for high rotation speeds Permissible surface speeds 180
0.6
and low coefficients of friction. The iglidur® L250 material iglidur® L250 has been developed especially for high surface 160 Rotating
0.5 oscillating
can feature these advantages particularly with low loads. speeds with low loads. Besides the physical limit, which 140
Wear [µm/km]
at high peripheral speeds and the permitted wear limit is 0.2 60
Mechanical properties thus reached earlier. The maximum speeds are shown in
0.1
40
20
With increasing temperatures, the compressive strength table 03.
0.0 0
of iglidur® L250 plain bearings decreases. The diagram 0 10 20 30 40 50 60 70 80 0 5 10 15 20 25 30 35 40 45
Surface speed, page 44
02 shows this inverse relationship. The recommended Load [MPa] Load [MPa]
maximum surface pressure is a mechanical material para m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
meter. No conclusions regarding the tribological properties Continuous 1 0.7 2 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
can be drawn from this. Short-term 1.5 1.1 3 steel, as a function of the pressure
HR carbon steel
H.a. aluminium
> 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Wear [µm/km]
0.2
> 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
304 SS
0.5 0.1 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
Cf53
+23 °C +60 °C
10 0.0 Table 05: Important tolerances for plain bearings
0.4
Diagram 06: Wear, rotating with different shaft materials, according to ISO 3547-1 after pressfit
Coefficient of friction [µ]
0.2
0 0.1
0 15 30 45 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
200 Online tools and more information www.igus.eu/l250 3D-CAD files, prices and delivery time online www.igus.eu/l250 201
L250SM iglidur® L250 | Product range iglidur® L250 | Product range L250FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
6.0 +0.020 +0.068 8.0 6.0 L250SM-0608-06 6.0 +0.020 +0.068 8.0 12.0 6.0 1.0 L250FM-0608-06
8.0 +0.025 +0.083 10.0 10.0 L250SM-0810-10 8.0 +0.025 +0.083 10.0 15.0 10.0 1.0 L250FM-0810-10
10.0 +0.025 +0.083 12.0 10.0 L250SM-1012-10 10.0 +0.025 +0.083 12.0 18.0 10.0 1.0 L250FM-1012-10
12.0 +0.032 +0.102 14.0 12.0 L250SM-1214-12 12.0 +0.032 +0.102 14.0 20.0 12.0 1.0 L250FM-1214-12
16.0 +0.032 +0.102 18.0 15.0 L250SM-1618-15 16.0 +0.032 +0.102 18.0 24.0 17.0 1.0 L250FM-1618-17
20.0 +0.040 +0.124 23.0 20.0 L250SM-2023-20 20.0 +0.040 +0.124 23.0 30.0 21.5 1.5 L250FM-2023-21
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
202 Online tools and more information www.igus.eu/l250 3D-CAD files, prices and delivery time online www.igus.eu/l250 203
iglidur®
L250 My sketches
Load [MPa]
●● Electric motors
UV resistance
●● Fans
The material properties of iglidur® L350 bearings do not
●● Household appliances 0.1
0.001 0.01 0.1 1.0 10.0 change under UV rays or other weathering influences.
Surface speed [m/s]
Diagram 01: Permissible pv values for iglidur® L350 Medium Resistance
Available from stock running dry against a steel shaft, at +20 °C, mounted Alcohol +
Detailed information about delivery time online. in a steel housing Hydrocarbons + to 0
Greases, oils without additives +
Block pricing online Moisture absorption Fuels +
No minimum order value. From batch size 1. The very low moisture absorption of 0.4 % weight in a normal Diluted acids +
climate and 1.4 % weight at maximum water absorption Strong acids +
Max. +180 °C also enables continuous operation in high humidity or in Diluted alkalines +
Min. –100 °C liquid media. Strong alkalines +
Diagram, www.igus.eu/l350-moisture + resistant 0 conditionally resistant – not resistant
Ø 3–10 mm
All data given at room temperature [+20 °C]
More dimensions upon request Vacuum
Table 02: Chemical resistance
In vacuum, the moisture content is released as vapour. Due
Online product finder to its low moisture absorption, use in a vacuum is possible. Chemical table, page 1432
www.igus.eu/iglidur-finder
206 Online tools and more information www.igus.eu/l350 3D-CAD files, prices and delivery time online www.igus.eu/l350 207
L350 L350
+180 °C iglidur L350 | Technical data
®
iglidur L350 | Technical data ® +180 °C
59 MPa 59 MPa
5 0.20
With iglidur® L350, another lubrication and maintenance- Permissible surface speeds
free material is now available, which is designed for perma- iglidur® L350 has been developed especially for high surface 4
0.15
nently high speeds. Due to the low thermal expansion and speeds with low loads. Due to the high temperature-
20 up to a speed of more than 3 m/s. adjusts to the F10 tolerances. For particular dimensions the
10 Application temperatures, page 49 tolerance differs depending on the wall thickness (please
0 Additional securing, page 49 Shaft materials, page 52 see product range table).
20 40 60 80 100 120 140 160 180
Temperature [°C]
iglidur® L350 Dry Greases Oil Water Testing methods, page 57
Diagram 02: Permissible maximum surface pressure of Friction and wear
as a function of temperature (59 MPa at +20 °C) The very low coefficient of friction is constantly low, even at C. o. f. µ 0.07–0.18 0.06 0.04 0.03
high speeds. The diagram 04 shows this with the example Table 04: Coefficient of friction against steel (Ra = 1µm, Diameter Shaft iglidur® L350 Housing
Diagram 03 shows the elastic deformation of iglidur® L350 of a steel shaft where the surface pressure is 0.75 MPa. 50 HRC) d1 [mm] h9 [mm] F10 [mm] H7 [mm]
under different loads. At the recommended maximum sur- up to 3 0–0.025 +0.006 +0.046 0 +0.010
Coefficients of friction and surfaces, page 47 > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
face pressure of 70 MPa the deformation is less than 2.5 % 18.0
Wear resistance, page 50 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
at room temperature. A plastic deformation can be negli-
15.0
gible up to this value. However, it is also dependent on the > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
HR carbon steel
H.a. aluminium
Surface pressure, page 41
according to ISO 3547-1 after pressfit
Wear [µm/km]
6.0
4.0 0.20
304 SS
3.0
Cf53
+23 °C +60 °C
3.0 0.15 0.0
Coefficient of friction [µ]
1.0 0.05
0.0 0.00
0 10 20 30 40 50 60 0.0 0.5 1.0 1.5 2.0 2.5 3.0
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
208 Online tools and more information www.igus.eu/l350 3D-CAD files, prices and delivery time online www.igus.eu/l350 209
L350SM iglidur® L350 | Product range iglidur® L350 | Product range L350SM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
3.0 +0.006 +0.046 4.5 3.0 L350SM-0304-03 3.0 +0.006 +0.046 4.5 7.5 5.0 0.75 L350FM-0304-05
4.0 +0.010 +0.058 5.5 4.0 L350SM-0405-04 4.0 +0.010 +0.058 5.5 9.5 6.0 0.75 L350FM-0405-06
5.0 +0.010 +0.058 7.0 5.0 L350SM-0507-05 5.0 +0.010 +0.058 7.0 11.0 7.0 1.0 L350FM-0507-07
6.0 +0.010 +0.058 8.0 6.0 L350SM-0608-06 6.0 +0.010 +0.058 8.0 12.0 8.0 1.0 L350FM-0608-08
8.0 +0.013 +0.071 10.0 10.0 L350SM-0810-10 8.0 +0.013 +0.071 10.0 15.0 9.0 1.0 L350FM-0810-09
10.0 +0.013 +0.071 12.0 10.0 L350SM-1012-10 10.0 +0.013 +0.071 12.0 18.0 9.0 1.0 L350FM-1012-09
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
210 Online tools and more information www.igus.eu/l350 3D-CAD files, prices and delivery time online www.igus.eu/l350 211
iglidur®
L350 My sketches
Load [MPa]
UV resistance
●● Electric motors
The material properties of iglidur® L500 bearings do not
●● Fans
0.1 change under UV rays or other weathering influences.
0.001 0.01 0.1 1.0 10.0
Surface speed [m/s]
Diagram 01: Permissible pv values for iglidur® L500 Medium Resistance
Available from stock bearings running against a steel shaft, at +20 °C, Alcohol +
Detailed information about delivery time online. mounted in a steel housing Hydrocarbons +
Greases, oils without additives +
Block pricing online Moisture absorption Fuels +
No minimum order value. From batch size 1. The very low moisture absorption of 0.1 % weight in a nor- Diluted acids +
mal climate and 0.3 % weight at maximum water absorption Strong acids +
Max. +250 °C also enables continuous operation in high humidity or in Diluted alkalines +
Min. –100 °C liquid media. Strong alkalines +
+ resistant 0 conditionally resistant – not resistant
Diagram, www.igus.eu/l500-moisture
Ø 3–10 mm All data given at room temperature [+20 °C]
More dimensions upon request Vacuum Table 02: Chemical resistance
In vacuum, the moisture content is released as vapour. Due
Online product finder to its low moisture absorption, use in a vacuum is possible. Chemical table, page 1478
www.igus.eu/iglidur-finder
214 Online tools and more information www.igus.eu/l500 3D-CAD files, prices and delivery time online www.igus.eu/l500 215
L500 L500
+250 °C iglidur L500 | Technical data
®
iglidur L500 | Technical data ® +250 °C
70 MPa 70 MPa
0.20 4
iglidur® L500 is a bearing material for high speeds and Permissible surface speeds iglidur® L500
fast sliding movements with low loads. Due to the low iglidur L500 has been developed especially for high surface
®
Sinter bearing
0.15 3
thermal expansion and low moisture absorption, bearings speeds with low loads. Due to the high temperature-
1.0
0.0
0 10 20 30 40 50 60 70
Load [MPa]
Diagram 03: Deformation under pressure and temperature
216 Online tools and more information www.igus.eu/l500 3D-CAD files, prices and delivery time online www.igus.eu/l500 217
L500SM iglidur® L500 | Product range iglidur® L500 | Product range L500FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
3.0 +0.006 +0.046 4.5 3.0 L500SM-0304-03 3.0 +0.006 +0.046 4.5 7.5 5.0 0.75 L500FM-0304-05
4.0 +0.010 +0.058 5.5 4.0 L500SM-0405-04 4.0 +0.010 +0.058 5.5 9.5 6.0 0.75 L500FM-0405-06
5.0 +0.010 +0.058 7.0 5.0 L500SM-0507-05 5.0 +0.010 +0.058 7.0 11.0 7.0 1.0 L500FM-0507-07
6.0 +0.010 +0.058 8.0 6.0 L500SM-0608-06 6.0 +0.010 +0.058 8.0 12.0 8.0 1.0 L500FM-0608-08
8.0 +0.013 +0.071 10.0 10.0 L500SM-0810-10 8.0 +0.013 +0.071 10.0 15.0 9.5 1.0 L500FM-0810-09
10.0 +0.013 +0.071 12.0 10.0 L500SM-1012-10 10.0 +0.013 +0.071 12.0 18.0 9.5 1.0 L500FM-1012-09
3)
After press-fit. Testing methods Page 57 3)
After press-fit. Testing methods Page 57
218 Online tools and more information www.igus.eu/l500 3D-CAD files, prices and delivery time online www.igus.eu/l500 219
iglidur®
L500 My sketches
Low-cost – iglidur R ®
Load [MPa]
●● Model making
tribological properties are reduced by permanent exposure.
●● Furniture industry
●● Mechatronics 0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® R bearings Hydrocarbons +
Available from stock with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Fuels +
Diluted acids 0 to –
Block pricing online Strong acids –
Moisture absorption
No minimum order value. From batch size 1. Diluted alkalines +
The moisture absorption of iglidur® R bearings amounts
to about 0.2 % weight in standard climatic conditions. The Strong alkalines + to 0
Max. +90 °C
saturation limit submerged in water is 1.1 % weight. This + resistant 0 conditionally resistant – not resistant
Min. –50 °C
must be taken into account for these types of applications. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Ø 2–35 mm Diagram, www.igus.eu/r-moisture
More dimensions upon request
Vacuum Chemical table, page 1478
In vacuum, iglidur® R plain bearings release gases. Use in
Online product finder
vacuum is only possible to a limited extent.
www.igus.eu/iglidur-finder
222 Online tools and more information www.igus.eu/r 3D-CAD files, prices and delivery time online www.igus.eu/r 223
R R
+90 °C iglidur R | Technical data
®
iglidur R | Technical data ® +90 °C
23 MPa 23 MPa
0.35 10
The development of the iglidur® R as a bearing material Permissible surface speeds 9
0.30
focused on high performance and very low cost. Especially iglidur® R bearings are suitable for high surface speeds. 8
in the dry operation low coefficients of friction and wear Speeds of up to 10 m/s are permitted in linear motions. 0.25 7
Wear [µm/km]
The PTFE- and silicon-free material achieves extremely low show the speed at which due to friction an increase in 0.10 3
coefficients of friction in dry operation and runs largely free temperature up to the long-term permitted value can occur. 2
0.05
1
of stick-slip effects.
Surface speed, page 44 0.00 0
0 5 10 15 20 Cf53 hard 304 SS HR carbon
Mechanical properties m/s Rotating Oscillating Linear Load [MPa] chromed steel
With increasing temperatures, the compressive strength of Continuous 0.8 0.6 3.5 Diagram 05: Coefficient of friction as a function of the rotating oscillating
iglidur® R plain bearings decreases. The diagram 02 shows Short-term 1.2 1 5 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
this inverse relationship. The recommended maximum sur tions with different shaft materials, p = 2 MPa
Table 03: Maximum surface speeds
face pressure is a mechanical material parameter. No con
clusions regarding the tribological properties can be drawn
Temperatures Shaft materials Installation tolerances
from this.
With increasing temperatures, the compressive strength of Diagrams 06 and 07 display a summary of the results of iglidur® R plain bearings are standard bearings for shafts
25 iglidur® R plain bearings decreases. The diagram 02 shows tests with different shaft materials conducted with bearings with h-tolerance (recommended minimum h9). The bearings
this inverse relationship. The temperatures prevailing in the made from iglidur® R. At 0.3 m/s and 1 MPa, the high are designed for pressfit into a housing machined to a
20
bearing system also have an influence on the bearing wear. At grade steel and Cf53 shafts are the best materials. With H7 tolerance. After being assembled into a nominal size
15 temperatures over +50 °C an additional securing is required. increasing loads the iglidur® R bearings feature the best housing, the inner diameter automatically adjusts to the E10
wear behaviour with Cf53 and 304 stainless steel shafts. tolerances. For particular dimensions the tolerance differs
10
Application temperatures, page 49
In oscillating applications, the hard chromed shaft proves depending on the wall thickness (please see product range
Additional securing, page 49
Load [MPa]
HR carbon steel
H.a. aluminium
8 +23 °C +60 °C
0.4 1.5 according to ISO 3547-1 after pressfit
Wear [µm/km]
7
Coefficient of friction [µ]
6 1.0
304 SS
Cf53
5 0.3 0.5
Deformation [%]
4 0.0
3
0.2 Diagram 06: Wear, rotating with different shaft materials,
2
1 p = 1 MPa, v = 0.3 m/s
0 0.1
0 4 8 12 16 20 24 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
224 Online tools and more information www.igus.eu/r 3D-CAD files, prices and delivery time online www.igus.eu/r 225
RSM iglidur® R | Product range iglidur® R | Product range RFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
226 Online tools and more information www.igus.eu/r 3D-CAD files, prices and delivery time online www.igus.eu/r 227
iglidur®
R My sketches
Load [MPa]
tribological properties are reduced by permanent exposure.
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® D bearings Hydrocarbons +
Available upon request with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Fuels +
Diluted acids 0 to –
Order-related Moisture absorption Strong acids –
The moisture absorption of iglidur® D bearings amounts Diluted alkalines +
to about 0.3 % weight in standard climatic conditions. The Strong alkalines + to 0
Max. +90 °C
saturation limit in water is 1.1 % weight. This low moisture + resistant 0 conditionally resistant – not resistant
Min. –50 °C
absorption allows for design in wet environments. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Diagram, www.igus.eu/d-moisture
Order-related
Vacuum Chemical table, page 1478
In vacuum, iglidur® D plain bearings release gases. Use in
Online product finder
vacuum is only possible to a limited extent.
www.igus.eu/iglidur-finder
230 Online tools and more information www.igus.eu/d 3D-CAD files, prices and delivery time online www.igus.eu/d 231
D D
+90 °C iglidur D | Technical data
®
iglidur D | Technical data ® +90 °C
23 MPa 23 MPa
0.35 10
During the development process of iglidur® D as a bearing Permissible surface speeds 9
0.30
material, high performance and a very low price were the iglidur® D bearings are suitable for high surface speeds. 8
top requirements. In particular, low coefficients of friction Speeds of up to 10 m/s are permitted in linear motions. 0.25 7
Wear [µm/km]
dry operation and runs with virtually no stick-slip. show the speed at which due to friction an increase in 0.10 3
temperature up to the long-term permitted value can occur. 2
0.05
1
Mechanical properties
0.00 0
With increasing temperatures, the compressive strength of Surface speed, page 44 0 5 10 15 20 Cf53 hard 304 SS HR carbon
iglidur® D plain bearings decreases. The diagram 02 shows Load [MPa] chromed steel
this inverse relationship. The recommended maximum sur- m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the rotating oscillating
face pressure is a mechanical material parameter. No con Continuous 1.5 1.1 8 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
clusions regarding the tribological properties can be drawn Short-term 3 2.1 10 tions with different shaft materials, p = 2 MPa
from this.
Table 03: Maximum surface speeds
30
Shaft materials Installation tolerances
Diagrams 06 and 07 display a summary of the results of iglidur® D plain bearings are standard bearings for shafts
Temperatures
20 tests with different shaft materials conducted with bearings with h-tolerance (recommended minimum h9). The bearings
With increasing temperatures, the compressive strength
made from iglidur® D. are designed for pressfit into a housing machined to a
of iglidur® D plain bearings decreases. The diagram 02
Please contact us if you would like to use a shaft material H7 tolerance. After being assembled into a nominal size
10
shows this inverse relationship. The ambient application
not included in this list. housing, the inner diameter automatically adjusts to the
Load [MPa]
HR carbon steel
> 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
H.a. aluminium
Wear resistance, page 50 3
Wear [µm/km]
Surface pressure, page 41 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
2 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
304 SS
Cf53
1
Table 05: Important tolerances for plain bearings
10 0.4 0
9
according to ISO 3547-1 after pressfit
Diagram 06: Wear, rotating with different shaft materials,
8 +23 °C +60 °C
p = 1 MPa, v = 0.3 m/s
7
Coefficient of friction [µ]
0.3
6
Product range
5
iglidur® D plain bearings are manufactured to special order.
Deformation [%]
4
0.2
3
2
1
0 0.1
0 4 8 12 16 20 24 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
232 Online tools and more information www.igus.eu/d 3D-CAD files, prices and delivery time online www.igus.eu/d 233
iglidur®
D My sketches
Load [MPa]
●● Linear technology
●● Actuator Medium Resistance
0.1
0.001 0.01 0.1 1.0 10.0 Alcohol +
Surface speed [m/s] Hydrocarbons +
Diagram 01: Permissible pv values for iglidur® J200 Greases, oils without additives +
bearings with a wall thickness of 1 mm dry running against Fuels +
Available upon request
a steel shaft, at +20 °C, mounted in a steel housing Diluted acids 0 to –
Detailed information about delivery time online.
Strong acids –
Moisture absorption Diluted alkalines +
Order-related The moisture absorption of iglidur® J200 plain bearings in Strong alkalines + to 0
standard climatic conditions is approximately 0.2 % weight.
+ resistant 0 conditionally resistant – not resistant
The saturation limit in water is 0.7 % weight. Due to these
Max. +90 °C All data given at room temperature [+20 °C]
low values considering expansion by moisture absorption
Min. –50 °C Table 02: Chemical resistance
is only required in extreme cases.
236 Online tools and more information www.igus.eu/j200 3D-CAD files, prices and delivery time online www.igus.eu/j200 237
J200 J200
+90 °C iglidur J200 | Technical data
®
iglidur J200 | Technical data ® +90 °C
23 MPa 23 MPa
0.5 80
iglidur® J200 is the result of the development of extremely Permissible surface speeds
70
low friction plain bearing materials. When using plain bea- iglidur® J200 attains high surface speeds through its rotating oscillating
0.4 60
rings in linear motion, friction can be critical. Many materials excellent coefficients of friction. Continuous rotation speeds
Wear [µm/km]
loads. Speeds of over 15 m/s were successfully tested in linear
0.2 20
movements.
10
Mechanical properties
0.1 0
With increasing temperatures, the compressive strength Surface speed, page 44 0.05 0.10 0.15 0.20 0 5 10 15 20 25
of iglidur® J200 plain bearings decreases. The diagram Surface speed [m/s] Load [MPa]
02 shows this inverse relationship. The recommended m/s Rotating Oscillating Linear Diagram 04: Coefficient of friction as a function of the Diagram 07: Wear for pivoting and rotating applications
maximum surface pressure is a mechanical material para Continuous 1 0.7 10 surface speed, p = 0.75 MPa with shaft material Cf53 hardened and ground steel, as
meter. No conclusions regarding the tribological properties Short-term 1.5 1.1 15 a function of the pressure
0.70
can be drawn from this.
Table 03: Maximum surface speeds 0.60
0.50
HR carbon steel
Product range
H.a. aluminium
304 SS
0.0 1.0 Cf53 order.
0 8 16 24 0.5
Load [MPa] 0.0
Diagram 03: Deformation under pressure and temperature Diagram 06: Wear, rotating with different shaft materials,
p = 1 MPa, v = 0.3 m/s
238 Online tools and more information www.igus.eu/j200 3D-CAD files, prices and delivery time online www.igus.eu/j200 239
iglidur plain bearing materials
®
High temperatures
Coefficient of friction
Temperature [°C] 123)
Price index
continuous operating temperatures up to +250 °C Detailed information about delivery time online.
[MPa] 124)
[µ] 125)
(exception: iglidur® V400 with +200 °C).
In the meantime, the iglidur® X6 surpasses the Block pricing online
standard iglidur® X here in many rotating and No minimum order value. From batch size 1.
New iglidur® HSD350 – All-rounder suitable for steam 180
pivoting applications.
sterilisation
iglidur® Z has also been long established as Ø 2–120 mm
Media-resistant and hygienic with low costs 0.15 2.00
standard with extremely low wear rates under More dimensions upon request 30
Page 281
high loads and/or temperatures.
iglidur® V400 is characterised as a problem solver Imperial dimensions available
in many special cases, and iglidur® UW500 is the From page 1391
iglidur® UW500 – For hot liquids 0.33
specialist for hot liquids.
Wear resistant in liquid at long-term operation 250 140
●● Lubrication and maintenance-free Online product finder 2.20
Page 287
●● Lightweight www.igus.eu/iglidur-finder
●● Good price / performance ratio
●● Predictable service life 123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
[µ] 125)
6.30
Page 245
Page 255
iglidur® X6 – The high temperature specialist Efficient hardening with ultraviolet radiation: The Lubrication-free iglidur® bearings in a filling system
up to +250 °C used iglidur® bearings are chemically resistant and for milk are resistant to disinfectants and high
250 150
Up to six times more wear resistant than iglidur® X 0.16
are also resistant to the temperatures of +120 °C temperatures.
1.20
Page 265 generated here.
200
iglidur® V400 – For soft shafts and high
temperatures:
Wear and media resistant 45 0.19
0.30
Page 273
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
242 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 243
The chemical and temperature
specialist – iglidur X ®
Load [MPa]
iglidur® Z, page 255 1.0
The excellent material properties of iglidur® X do not change
Available from stock under UV radiation and other weathering effects.
Typical application areas 0.1
Detailed information about delivery time online.
●● Beverage technology 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
●● Woodworking
Block pricing online Diagram 01: Permissible pv values for iglidur® X bearings Alcohol +
●● Plastic processing industry
No minimum order value. From batch size 1. with a wall thickness of 1 mm dry running against a Hydrocarbons +
●● Aerospace engineering
steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Cleanroom
Max. +250 °C Fuels +
Min. –100 °C Moisture absorption Diluted acids +
The moisture absorption of iglidur® X plain bearings is very Strong acids 0 to –
Ø 2–120 mm low. It is approximately 0.1 % weight in standard climatic Diluted alkalines +
More dimensions upon request conditions. The maximum moisture absorption is 0.5 % Strong alkalines +
weight.
+ resistant 0 conditionally resistant – not resistant
Imperial dimensions available
Diagram, www.igus.eu/x-moisture All data given at room temperature [+20 °C]
From page 1391
Table 02: Chemical resistance
Vacuum
Online product finder In a vacuum environment iglidur® X plain bearings can be Chemical table, page 1478
www.igus.eu/iglidur-finder used virtually without restrictions. Outgassing takes place
to a very limited extent.
246 Online tools and more information www.igus.eu/x 3D-CAD files, prices and delivery time online www.igus.eu/x 247
X X
+250 °C iglidur X | Technical data
®
iglidur X | Technical data ® +250 °C
150 MPa 150 MPa
0.4 35.0
iglidur® X has an excellent combination of high tempera- Permissible surface speeds
30.0
ture resistance, high compressive strength, and excellent iglidur® X is designed for higher speeds than other iglidur®
resistance to chemicals. The aspect of temperature resi- bearings. This is due to its high temperature resistance and 25.0
Wear [µm/km]
However, in this case, only the smallest radial loads may act 0.2
10.0
Mechanical properties
304 SS
on the bearings. At the given speeds, friction can cause a
5.0
Cf53
With increasing temperatures, the compressive strength of temperature increase to maximum permissible levels.
0.1 0.0
iglidur® X plain bearings decreases. The diagram 02 shows 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
this inverse relationship. The recommended maximum Surface speed, page 44 Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
surface pressure is a mechanical material parameter. No Diagram 04: Coefficient of friction as a function of the
conclusions regarding the tribological properties can be m/s Rotating Oscillating Linear pressure, v = 0.01 m/s 70
drawn from this. Continuous 1.5 1.1 5 60
Wear [µm/km]
0.20
20
100
Temperatures 0.15
10
80
Having a permissible long-term application, temperature of 0.10
60 0
+250 °C, iglidur® X will even withstand +315 °C short-term.
Load [MPa]
3 iglidur® X Dry Greases Oil Water d1 [mm] h9 [mm] F10 [mm] H7 [mm]
2 C. o. f. µ 0.09–0.27 0.09 0.04 0.04 up to 3 0–0.025 +0.006 +0.046 0 +0.010
1 > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
Table 04: Coefficient of friction against steel (Ra = 1µm,
0 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
0 25 50 75 100 50 HRC)
Load [MPa]
> 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Diagram 03: Deformation under pressure and temperature > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
> 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
> 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
248 Online tools and more information www.igus.eu/x 3D-CAD files, prices and delivery time online www.igus.eu/x 249
XSM iglidur® X | Product range iglidur® X | Product range XSM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
18.0 20.0 20.0 XSM-1820-20 30.0 34.0 20.0 XSM-3034-20
+0.016 +0.086
18.0 20.0 25.0 XSM-1820-25 30.0 +0.020 34.0 25.0 XSM-3034-25
d1
d2
0.5 XSM-2022-140 XSM-3034-30
20.0 22.0 14.0 30.0 +0.104 34.0 30.0
20.0 22.0 14.5 XSM-2022-145 30.0 34.0 40.0 XSM-3034-40
30°
iglidur® material
20.0 22.0 17.0 XSM-2022-17 32.0 36.0 20.0 XSM-3236-20
b1
20.0 22.0 18.0 XSM-2022-18 32.0 36.0 25.0 XSM-3236-25
Outer-Ø d2
Inner-Ø d1
Length b1
20.0 22.0 20.0 XSM-2022-20 32.0 36.0 30.0 XSM-3236-30
Form S
Metric
20.0 23.0 7.0 XSM-2023-07 32.0 36.0 35.0 XSM-3236-35
2)
Thickness < 1 mm: chamfer = 20° 20.0 23.0 10.0 XSM-2023-10 32.0 36.0 40.0 XSM-3236-40
20.0 23.0 15.0 XSM-2023-15 32.0 36.0 54.0 XSM-3236-54
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 20.0 23.0 20.0 XSM-2023-20 35.0 39.0 20.0 XSM-3539-20
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 20.0 23.0 25.0 XSM-2023-25 35.0 39.0 30.0 XSM-3539-30
f [mm]: 0.3 0.5 0.8 1.2 20.0 23.0 30.0 XSM-2023-30 35.0 39.0 40.0 XSM-3539-40
Imperial dimensions available
From page 1421 22.0 25.0 15.0 XSM-2225-15 35.0 39.0 50.0 XSM-3539-50
Dimensions [mm] 22.0 25.0 20.0 XSM-2225-20 40.0 44.0 20.0 XSM-4044-20
+0.025
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 22.0 25.0 25.0 XSM-2225-25 40.0 44.0 30.0 XSM-4044-30
+0.125
Tolerance3) h13 Tolerance3) h13 22.0 25.0 30.0 XSM-2225-30 40.0 44.0 40.0 XSM-4044-40
2.0 3.5 3.0 XSM-0203-03 10.0 +0.013 +0.071 12.0 20.0 XSM-1012-20 24.0 26.0 20.0 XSM-2426-20 40.0 44.0 50.0 XSM-4044-50
+0.006
3.0 4.5 3.0 XSM-0304-03 12.0 14.0 3.5 XSM-1214-035 24.0 27.0 6.0 XSM-2427-06 45.0 50.0 20.0 XSM-4550-20
+0.046
3.0 4.5 6.0 XSM-0304-06 12.0 14.0 6.0 XSM-1214-06 24.0 27.0 15.0 XSM-2427-15 45.0 50.0 30.0 XSM-4550-30
+0.020
4.0 5.5 4.0 XSM-0405-04 12.0 14.0 8.0 XSM-1214-08 24.0 27.0 20.0 XSM-2427-20 45.0 50.0 40.0 XSM-4550-40
+0.104
4.0 5.5 6.0 XSM-0405-06 12.0 14.0 10.0 XSM-1214-10 24.0 27.0 25.0 XSM-2427-25 45.0 50.0 50.0 XSM-4550-50
4.0 5.0 9.0 XSM-0405-09 12.0 14.0 12.0 XSM-1214-12 24.0 27.0 30.0 XSM-2427-30 50.0 55.0 20.0 XSM-5055-20
4.0 5.5 10.0 XSM-0405-10 12.0 14.0 15.0 XSM-1214-15 25.0 28.0 7.7 XSM-2528-077 50.0 55.0 30.0 XSM-5055-30
5.0 7.0 3.5 XSM-0507-035 12.0 14.0 20.0 XSM-1214-20 25.0 28.0 9.0 XSM-2528-09 50.0 55.0 40.0 XSM-5055-40
5.0 +0.010 7.0 5.0 XSM-0507-05 12.0 14.0 25.0 XSM-1214-25 25.0 28.0 12.0 XSM-2528-12 50.0 55.0 50.0 XSM-5055-50
5.0 +0.058 7.0 8.0 XSM-0507-08 13.0 15.0 10.0 XSM-1315-10 25.0 28.0 13.0 XSM-2528-13 50.0 55.0 60.0 XSM-5055-60
5.0 7.0 10.0 XSM-0507-10 13.0 15.0 20.0 XSM-1315-20 25.0 28.0 15.0 XSM-2528-15 55.0 60.0 50.0 XSM-5560-50
6.0 8.0 6.0 XSM-0608-06 14.0 16.0 12.0 XSM-1416-12 25.0 28.0 20.0 XSM-2528-20 60.0 65.0 45.0 XSM-6065-45
6.0 8.0 8.0 XSM-0608-08 14.0 16.0 15.0 XSM-1416-15 25.0 28.0 25.0 XSM-2528-25 60.0 65.0 60.0 XSM-6065-60
+0.030
6.0 8.0 10.0 XSM-0608-10 14.0 16.0 20.0 XSM-1416-20 25.0 28.0 30.0 XSM-2528-30 65.0 70.0 50.0 XSM-6570-50
+0.016 +0.150
6.0 8.0 13.8 XSM-0608-13 14.0 16.0 25.0 XSM-1416-25 25.0 28.0 35.0 XSM-2528-35 70.0 75.0 70.0 XSM-7075-70
+0.086
7.0 9.0 10.0 XSM-0709-10 15.0 17.0 7.0 XSM-1517-07 26.0 28.0 10.0 XSM-2628-10 75.0 80.0 60.0 XSM-7580-60
7.0 9.0 12.0 XSM-0709-12 15.0 17.0 10.0 XSM-1517-10 27.0 30.0 5.7 XSM-2730-05 80.0 85.0 100.0 XSM-8085-100
8.0 10.0 6.0 XSM-0810-06 15.0 17.0 15.0 XSM-1517-15 28.0 32.0 20.0 XSM-2832-20 90.0 95.0 100.0 XSM-9095-100
8.0 10.0 8.0 XSM-0810-08 15.0 17.0 20.0 XSM-1517-20 28.0 32.0 25.0 XSM-2832-25 100.0 +0.036 105.0 100.0 XSM-100105-100
8.0 10.0 10.0 XSM-0810-10 15.0 17.0 25.0 XSM-1517-25 28.0 32.0 30.0 XSM-2832-30 110.0 +0.176 115.0 100.0 XSM-110115-100
8.0 10.0 12.0 XSM-0810-12 16.0 18.0 10.0 XSM-1618-10 28.0 32.0 69.0 XSM-2832-69 120.0 125.0 100.0 XSM-120125-100
+0.013
8.0 10.0 15.0 XSM-0810-15 16.0 18.0 12.0 XSM-1618-12 30.0 34.0 15.0 XSM-3034-15
+0.071
10.0 12.0 3.5 XSM-1012-035 16.0 18.0 15.0 XSM-1618-15 3)
After press-fit. Testing methods Page 57
10.0 12.0 6.0 XSM-1012-06 16.0 18.0 20.0 XSM-1618-20
10.0 12.0 8.0 XSM-1012-08 16.0 18.0 25.0 XSM-1618-25
10.0 12.0 10.0 XSM-1012-10 16.0 18.0 35.0 XSM-1618-35
10.0 12.0 12.0 XSM-1012-12 17.0 19.0 20.0 XSM-1719-20 Even more dimensions from stock
10.0 12.0 15.0 XSM-1012-15 18.0 20.0 15.0 XSM-1820-15 More than 300 dimensions are now available. Search online for your required bearing.
3)
After press-fit. Testing methods Page 57 www.igus.eu/iglidur-specialbearings
250 Online tools and more information www.igus.eu/x 3D-CAD files, prices and delivery time online www.igus.eu/x 251
XFM iglidur® X | Product range iglidur® X | Product range XFM
30
m
r d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
°
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
25.0 28.0 35.0 16.5 1.5 XFM-2528-16 35.0 39.0 47.0 26.0 2.0 XFM-3539-26
25.0 28.0 35.0 21.0 1.5 XFM-2528-21 40.0 44.0 52.0 22.0 2.0 XFM-4044-22
d2
d3
d1
25.0 28.0 33.0 8.0 1.0 XFM-252833-08 40.0 +0.025 44.0 52.0 30.0 2.0 XFM-4044-30
+0.020
27.0 30.0 38.0 20.0 1.5 XFM-2730-20 40.0 +0.125 44.0 52.0 40.0 2.0 XFM-4044-40
+0.104
iglidur® material
30.0 34.0 42.0 16.0 2.0 XFM-3034-16 45.0 50.0 58.0 50.0 2.0 XFM-4550-50
b2
30.0 34.0 42.0 26.0 2.0 XFM-3034-26 50.0 55.0 63.0 40.0 2.0 XFM-5055-40
Outer-Ø d2
Inner-Ø d1
Length b1
b1 30.0 34.0 42.0 40.0 2.0 XFM-3034-40 60.0 65.0 73.0 40.0 2.0 XFM-6065-40
+0.030
Form F
Metric
32.0 36.0 45.0 15.0 2.0 XFM-3236-15 70.0 75.0 83.0 40.0 2.0 XFM-7075-40
2)
Thickness < 1 mm: chamfer = 20° +0.025 +0.150
32.0 36.0 45.0 26.0 2.0 XFM-3236-26 75.0 80.0 88.0 50.0 2.0 XFM-7580-50
+0.125
35.0 39.0 47.0 16.0 2.0 XFM-3539-16
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 3)
After press-fit. Testing methods Page 57
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
From page 1442
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
2.0 +0.006 4.0 6.0 3.0 1.0 XFM-020406-03 12.0 14.0 20.0 5.5 1.0 XFM-1214-055
3.0 +0.046 4.5 7.5 5.0 0.75 XFM-0304-05 12.0 14.0 20.0 7.0 1.0 XFM-1214-07
4.0 5.5 9.5 4.0 0.75 XFM-0405-04 12.0 14.0 20.0 9.0 1.0 XFM-1214-09
+0.016
4.0 5.5 9.5 6.0 0.75 XFM-0405-06 12.0 14.0 20.0 12.0 1.0 XFM-1214-12
+0.086
4.0 5.5 8.0 6.0 0.75 XFM-040508-06 12.0 14.0 20.0 15.0 1.0 XFM-1214-15
+0.010
5.0 7.0 11.0 5.0 1.0 XFM-0507-05 12.0 14.0 20.0 17.0 1.0 XFM-1214-17
+0.058
6.0 8.0 12.0 4.0 1.0 XFM-0608-04 12.0 14.0 18.0 3.9 1.0 XFM-121418-039
6.0 8.0 12.0 8.0 1.0 XFM-0608-08 12.0 14.0 18.0 5.9 1.0 XFM-121418-059
6.0 8.0 12.0 10.0 1.0 XFM-0608-10 14.0 16.0 22.0 10.0 1.0 XFM-1416-10
8.0 10.0 15.0 5.5 1.0 XFM-0810-05 14.0 16.0 22.0 12.0 1.0 XFM-1416-12
8.0 10.0 15.0 7.5 1.0 XFM-0810-07 14.0 16.0 22.0 17.0 1.0 XFM-1416-17
8.0 10.0 15.0 8.0 1.0 XFM-0810-08 15.0 17.0 23.0 6.0 1.0 XFM-1517-06
8.0 10.0 15.0 9.0 1.0 XFM-0810-09 15.0 17.0 23.0 9.0 1.0 XFM-1517-09
+0.016
8.0 10.0 12.0 4.0 1.0 XFM-081012-04 15.0 17.0 23.0 12.0 1.0 XFM-1517-12
+0.086
8.0 10.0 14.0 31.5 1.0 XFM-081014-31 15.0 17.0 23.0 17.0 1.0 XFM-1517-17
9.0 11.0 15.0 18.0 0.5 XFM-0911-18 16.0 18.0 24.0 12.0 1.0 XFM-1618-12
10.0 12.0 18.0 5.0 1.0 XFM-1012-05 16.0 18.0 24.0 17.0 1.0 XFM-1618-17
10.0 +0.013 12.0 18.0 6.0 1.0 XFM-1012-06 18.0 20.0 26.0 12.0 1.0 XFM-1820-12
10.0 +0.071 12.0 18.0 7.0 1.0 XFM-1012-07 18.0 20.0 26.0 17.0 1.0 XFM-1820-17
10.0 12.0 15.0 8.0 1.0 XFM-1012-08 18.0 20.0 26.0 22.0 1.0 XFM-1820-22
10.0 12.0 18.0 9.0 1.0 XFM-1012-09 20.0 23.0 30.0 6.5 1.5 XFM-2023-065
10.0 12.0 18.0 12.0 1.0 XFM-1012-12 20.0 23.0 30.0 7.5 1.5 XFM-2023-075 Couldn't find your size?
10.0 12.0 18.0 15.0 1.0 XFM-1012-15 20.0 23.0 30.0 11.0 1.5 XFM-2023-11 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
+0.020
10.0 12.0 18.0 17.0 1.0 XFM-1012-17 20.0 23.0 30.0 16.5 1.5 XFM-2023-16 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
+0.104
10.0 12.0 18.0 18.0 1.0 XFM-1012-18 20.0 23.0 30.0 21.0 1.5 XFM-2023-21
10.0 12.0 15.0 22.0 1.0 XFM-1012-22 25.0 28.0 35.0 11.5 1.5 XFM-2528-11 Even more dimensions from stock
10.0 12.0 18.0 25.0 1.0 XFM-1012-25 25.0 28.0 35.0 13.5 1.5 XFM-2528-13 More than 300 dimensions are now available. Search online for your required bearing.
3)
After press-fit. Testing methods Page 57 www.igus.eu/iglidur-specialbearings
252 Online tools and more information www.igus.eu/x 3D-CAD files, prices and delivery time online www.igus.eu/x 253
XTM iglidur® X | Product range
Thrust Washer (Form T)
d1
Order key
s
d2
d5
d4
iglidur® material
d6
Thickness s
Outer-Ø d2
h
Inner-Ø d1
Form T
Metric
Dimensions according to ISO 3547-1 Imperial dimensions available
and special dimensions From page 1446
Dimensions [mm]
d1 d2 s d4 d5 h d6 Part No.
+0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12
+0.12 +0.125 –0.2
6.0 20.0 1.5 13.0 1.5 1.0 20.0 XTM-0620-015
8.0 18.0 1.5 13.0 1.5 1.0 18.0 XTM-0818-015
8.0 29.0 1.5 4) 4)
1.0 29.0 XTM-0829-015
8.0 30.0 1.5 4) 4)
1.0 30.0 XTM-0830-015
10.0 18.0 1.0 4) 4)
0.7 18.0 XTM-1018-010
12.0 24.0 1.5 18.0 1.5 1.0 24.0 XTM-1224-015
14.0 26.0 1.5 20.0 2.0 1.0 26.0 XTM-1426-015
15.0 22.0 0.8 4) 4)
0.5 22.0 XTM-1522-008
15.0
16.0
24.0
30.0
1.5
1.5
19.5
22.0
1.5
2.0
1.0
1.0
24.0
30.0
XTM-1524-015
XTM-1630-015 Extremely long service life under
extreme conditions – iglidur Z
18.0 32.0 1.5 25.0 2.0 1.0 32.0 XTM-1832-015
®
20.0 36.0 1.5 28.0 3.0 1.0 36.0 XTM-2036-015
22.0 38.0 1.5 30.0 3.0 1.0 38.0 XTM-2238-015
24.0 42.0 1.5 33.0 3.0 1.0 42.0 XTM-2442-015
26.0 44.0 1.5 35.0 3.0 1.0 44.0 XTM-2644-015 Excellent wear resistance especially with high
28.0 48.0 1.5 38.0 4.0 1.0 48.0 XTM-2848-015
32.0 54.0 1.5 43.0 4.0 1.0 54.0 XTM-3254-015 loads
38.0 62.0 1.5 50.0 4.0 1.0 62.0 XTM-3862-015
42.0 66.0 1.5 54.0 4.0 1.0 66.0 XTM-4266-015 High thermal resistance
48.0 74.0 2.0 61.0 4.0 1.5 74.0 XTM-4874-020
52.0 78.0 2.0 65.0 4.0 1.5 78.0 XTM-5278-020 For extreme loads
62.0 90.0 2.0 76.0 4.0 1.5 90.0 XTM-6290-020
4)
Design without fixing bore
For high surface speeds
Resistant to edge loads
Even more dimensions from stock
More than 300 dimensions are now available. Search online for your required bearing.
Lubrication and maintenance-free
www.igus.eu/iglidur-specialbearings
Standard range from stock
254 Online tools and more information www.igus.eu/x
Z
iglidur®
Z iglidur Z | Extremely long service life under extreme conditions
®
iglidur Z | Technical data
® +250 °C
150 MPa
Resistant to wear and impact even at high loads and temperatures
Material properties
General properties Unit iglidur® Z Testing method
Excellent wear resistance Extremely high compressive strength coupled Density g/cm3 1.40
especially with high loads with high elasticity enables iglidur® Z bearings to Colour brown
attain their prominent features in association with Max. moisture absorption at +23 °C/50 % r.h. % weight 0.3 DIN 53495
soft shafts, edge loads and impacts. The bearings Max. water absorption % weight 1.1
are at the same time suitable for temperatures up Coefficient of sliding friction, dynamic, against steel µ 0.06–0.14
to +250 °C. pv value, max. (dry) MPa · m/s 0.84
High thermal resistance Mechanical properties
Flexural modulus MPa 2,400 DIN 53457
Flexural strength at +20 °C MPa 95 DIN 53452
When to use it? Compressive strength MPa 65
For extreme loads ●● For continuous temperatures up to +250 °C Max. recommended surface pressure (+20 °C) MPa 150
long-term or +310 °C short-term Shore-D hardness 81 DIN 53505
●● When high wear resistance is required Physical and thermal properties
especially under high radial loads Max. long-term application temperature °C +250
●● For high surface speeds Max. short-term application temperature °C +310
For high surface speeds ●● For edge loading in connection with high Min. long-term application temperature °C –100
surface pressures Heat conductivity W/m · K 0.62 ASTM C 177
Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
4 DIN 53752
Electrical properties
Specific contact resistance Ωcm > 1011 DIN IEC 93
When not to use it? Surface resistance Ω > 10 11
DIN 53482
Resistant to edge loads ●● For low loads and temperatures Table 01: Material properties table
iglidur® P, page 113
●● When a cost-effective general purpose 1,000.0
Radiation resistance
bearing is required
Plain bearings made from iglidur® Z are resistant to radiation
iglidur® G, page 79 100.0
up to an intensity of 1 · 105 Gy.
●● When electrically conductive bearings are
needed 10.0
UV resistance
iglidur® F, page 449
Exposed to UV radiation, iglidur® Z bearings lose appro
Load [MPa]
iglidur® H, page 313 1.0
ximately 50 % of their tribological properties (wear resis
iglidur® H370, page 305
Available from stock tance).
0.1
Detailed information about delivery time online.
Typical application areas 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
●● Construction machinery industry
Block pricing online Diagram 01: Permissible pv values for iglidur® Z bearings Alcohols 0
●● Machine building
No minimum order value. From batch size 1. with a wall thickness of 1 mm dry running against a Hydrocarbons +
●● Textile industry
steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Aerospace engineering
Max. +250 °C Fuels +
●● Glass industry
Min. –100 °C Diluted acids +
Moisture absorption
The humidity absorption of iglidur® Z bearings amounts to Strong acids –
Ø 4–120 mm Diluted alkalines +
about 0.3 % weight in standard climatic conditions. The
More dimensions upon request Strong alkalines –
saturation limit in water is 1.1 % weight.
+ resistant 0 conditionally resistant – not resistant
Imperial dimensions available Diagram, www.igus.eu/z-moisture
All data given at room temperature [+20 °C]
From page 1391
Vacuum Table 02: Chemical resistance
In vacuum, moisture is released as a vapour. Only dehumi
Online product finder
dified bearings made from iglidur® Z are suitable for vacuum. Chemical table, page 1478
www.igus.eu/iglidur-finder
256 Online tools and more information www.igus.eu/z 3D-CAD files, prices and delivery time online www.igus.eu/z 257
Z Z
+250 °C iglidur Z | Technical data
®
iglidur Z | Technical data ® +250 °C
150 MPa 150 MPa
0.25 140
In addition to iglidur® X, iglidur® Z is among the best selling Permissible surface speeds
120
iglidur® high-temperature materials. Specifically worth iglidur® Z is a high temperature bearing material, which is 0.20
rotating oscillating
noting is the outstanding wear behaviour under extreme suited for applications with very high specific loads. The 100
Wear [µm/km]
Mechanical properties a temperature increase to maximum permissible levels. In 40
With increasing temperatures, the compressive strength of practice, though, this temperature level is rarely reached 0.05
20
iglidur® Z plain bearings decreases. The diagram 02 shows due to varying application conditions.
0.00 0
this inverse relationship. The recommended maximum 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50 60 70 80 90 100
Surface speed, page 44
surface pressure is a mechanical material parameter. No Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Continuous 1.5 1.1 5 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Short-term 3.5 2.5 6 steel, as a function of the pressure
160
140 Table 03: Maximum surface speeds
120 Shaft materials Installation tolerances
100 Diagram 06 shows wear rates in the lower load range, which iglidur® Z plain bearings are standard bearings for shafts
Temperatures
80 are very similar to those of other wear resistant iglidur® with h-tolerance (recommended minimum h9). The bearings
The maximum permissible short-term temperature is
60 materials. However, in the upper load range iglidur® Z are designed for pressfit into a housing machined to a
+310 °C. The ambient temperatures in the bearing system
Load [MPa]
40 outperforms all other materials in wear resistance. Provided H7 tolerance. After being assembled into a nominal size
also have an effect on the bearing wear. The wear rate
20 a Cf53 hardened and ground steel shaft is used, the wear housing, in standard cases the inner diameter automatically
rises with increasing temperatures. At high temperatures
0 is at 45 MPa still only 15 µm/km. adjusts to the F10 tolerances. For particular dimensions the
20 50 80 120 150 200 250 iglidur® Z is also the most wear resistant material when
At low loads iglidur® Z plain bearings wear less in oscillating tolerance differs depending on the wall thickness (please
Temperature [°C] running dry. At temperatures over +145 °C an additional
operation than in rotation. 304 stainless steel and hard see product range table).
Diagram 02: Permissible maximum surface pressure of securing is required.
chromed shaft are of interest here.
as a function of temperature (150 MPa at +20 °C)
Application temperatures, page 49 Testing methods, page 57
Additional securing, page 49 Shaft materials, page 52
iglidur Z is suitable for both medium and – due to its
®
Diameter Shaft iglidur® Z Housing
high heat resistance – high speeds. Diagram 03 shows iglidur Z ®
Dry Greases Oil Water d1 [mm] h9 [mm] F10 [mm] H7 [mm]
Friction and wear
the elastic deformation of iglidur® Z at radial loads. At the C. o. f. µ 0.06–0.14 0.09 0.04 0.04 up to 3 0–0.025 +0.006 +0.046 0 +0.010
The coefficient of friction declines just as the wear resistance
recommended maximum surface pressure of 150 MPa > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
with increasing load (diagrams 04 and 05). Table 04: Coefficient of friction against steel (Ra = 1µm,
the deformation is about 5.5 % at room temperature. > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
50 HRC)
Coefficients of friction and surfaces, page 47 > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Surface pressure, page 41 Wear resistance, page 50 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
> 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
8 0.4 12.0 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
7 > 80 to 120 0–0.087 +0.036 +0.176 0 +0.035
10.0
6 +23 °C +60 °C
Table 05: Important tolerances for plain bearings
0.3 8.0
5
HR carbon steel
H.a. aluminium
Deformation [%]
3
Wear [µm/km]
0.2 4.0
2
304 SS
2.0
Cf53
1
0 0.1 0.0
0 30 60 90 120 150 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
258 Online tools and more information www.igus.eu/z 3D-CAD files, prices and delivery time online www.igus.eu/z 259
ZSM iglidur® Z | Product range iglidur® Z | Product range ZSM
30°
h13 h13
Type Dimensions [mm]
24.0 27.0 30.0 ZSM-2427-30 40.0 44.0 30.0 ZSM-4044-30
25.0 28.0 15.0 ZSM-2528-15 40.0 44.0 40.0 ZSM-4044-40
d1
d2
0.5 ZSM-2528-20 ZSM-4044-47
25.0 28.0 20.0 40.0 44.0 47.0
25.0 28.0 25.0 ZSM-2528-25 40.0 44.0 50.0 ZSM-4044-50
30°
iglidur® material
25.0 28.0 30.0 ZSM-2528-30 45.0 50.0 20.0 ZSM-4550-20
b1
25.0 28.0 48.0 ZSM-2528-48 45.0 50.0 30.0 ZSM-4550-30
Outer-Ø d2
Inner-Ø d1
+0.025
Length b1
25.0 30.0 20.0 ZSM-2530-20 45.0 50.0 40.0 ZSM-4550-40
+0.125
Form S
Metric
26.0 +0.020 30.0 34.0 ZSM-2630-34 45.0 50.0 50.0 ZSM-4550-50
2)
Thickness < 1 mm: chamfer = 20° 28.0 +0.104 32.0 20.0 ZSM-2832-20 50.0 55.0 20.0 ZSM-5055-20
28.0 32.0 25.0 ZSM-2832-25 50.0 55.0 30.0 ZSM-5055-30
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 28.0 32.0 30.0 ZSM-2832-30 50.0 55.0 40.0 ZSM-5055-40
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 28.0 34.0 29.0 ZSM-2834-29 50.0 55.0 50.0 ZSM-5055-50
f [mm]: 0.3 0.5 0.8 1.2 30.0 34.0 20.0 ZSM-3034-20 50.0 55.0 60.0 ZSM-5055-60
Imperial dimensions available
From page 1423 30.0 34.0 25.0 ZSM-3034-25 55.0 60.0 60.0 ZSM-5560-60
Dimensions [mm] 30.0 34.0 30.0 ZSM-3034-30 60.0 65.0 60.0 ZSM-6065-60
+0.030
d1 d1-Tolerance3) d2 b1 Part No. d1 d1-Tolerance3) d2 b1 Part No. 30.0 34.0 40.0 ZSM-3034-40 70.0 75.0 70.0 ZSM-7075-70
+0.150
h13 h13 32.0 35.0 44.0 ZSM-3235-44 80.0 85.0 60.0 ZSM-8085-60
4.0 5.5 4.0 ZSM-0405-04 14.0 16.0 20.0 ZSM-1416-20 32.0 36.0 20.0 ZSM-3236-20 80.0 85.0 80.0 ZSM-8085-80
4.0 5.5 6.0 ZSM-0405-06 14.0 16.0 25.0 ZSM-1416-25 32.0 36.0 30.0 ZSM-3236-30 85.0 90.0 60.0 ZSM-8590-60
+0.036
4.0 5.5 8.0 ZSM-0405-08 15.0 17.0 15.0 ZSM-1517-15 32.0 36.0 40.0 ZSM-3236-40 85.0 90.0 100.0 ZSM-8590-100
+0.176
5.0 7.0 5.0 ZSM-0507-05 15.0 17.0 20.0 ZSM-1517-20 35.0 +0.025 39.0 20.0 ZSM-3539-20 95.0 100.0 60.0 ZSM-95100-60
5.0 7.0 9.0 ZSM-0507-09 15.0 17.0 22.0 ZSM-1517-22 35.0 +0.125 39.0 30.0 ZSM-3539-30 +0.072
+0.010 100.0 105.0 100.0 ZSM-100105-100
5.0 7.0 10.0 ZSM-0507-10 15.0 17.0 25.0 ZSM-1517-25 35.0 39.0 40.0 ZSM-3539-40 +0.212
+0.058
6.0 8.0 6.0 ZSM-0608-06 16.0 +0.016 18.0 12.0 ZSM-1618-12 35.0 39.0 50.0 ZSM-3539-50 +0.043
120.0 125.0 100.0 ZSM-120125-100
6.0 8.0 8.0 ZSM-0608-08 16.0 +0.086 18.0 15.0 ZSM-1618-15 40.0 44.0 15.0 ZSM-4044-15 +0.203
6.0 8.0 10.0 ZSM-0608-10 16.0 18.0 20.0 ZSM-1618-20 40.0 44.0 20.0 ZSM-4044-20
6.0 8.0 12.0 ZSM-0608-12 16.0 18.0 25.0 ZSM-1618-25 3)
After press-fit. Testing methods Page 57
6.0 10.0 6.0 ZSM-0610-06 18.0 20.0 15.0 ZSM-1820-15
8.0 10.0 6.0 ZSM-0810-06 18.0 20.0 20.0 ZSM-1820-20
8.0 10.0 8.0 ZSM-0810-08 18.0 20.0 24.0 ZSM-1820-24
8.0 10.0 10.0 ZSM-0810-10 18.0 20.0 25.0 ZSM-1820-25
8.0 10.0 12.0 ZSM-0810-12 20.0 23.0 10.0 ZSM-2023-10
+0.013
10.0 12.0 8.0 ZSM-1012-08 20.0 23.0 15.0 ZSM-2023-15
+0.071
10.0 12.0 10.0 ZSM-1012-10 20.0 23.0 20.0 ZSM-2023-20
10.0 12.0 12.0 ZSM-1012-12 20.0 23.0 25.0 ZSM-2023-25
10.0 12.0 15.0 ZSM-1012-15 20.0 23.0 30.0 ZSM-2023-30
10.0 12.0 20.0 ZSM-1012-20 20.0 23.0 35.0 ZSM-2023-35
12.0 14.0 8.0 ZSM-1214-08 22.0 +0.020 24.0 30.0 ZSM-2224-30
12.0 14.0 10.0 ZSM-1214-10 22.0 +0.104 25.0 15.0 ZSM-2225-15
12.0 14.0 12.0 ZSM-1214-12 22.0 25.0 20.0 ZSM-2225-20 Couldn't find your size?
12.0 +0.016 14.0 15.0 ZSM-1214-15 22.0 25.0 25.0 ZSM-2225-25 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
12.0 +0.086 14.0 20.0 ZSM-1214-20 22.0 25.0 30.0 ZSM-2225-30 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
13.0 15.0 10.0 ZSM-1315-10 24.0 27.0 15.0 ZSM-2427-15
13.0 15.0 20.0 ZSM-1315-20 24.0 27.0 20.0 ZSM-2427-20 Even more dimensions from stock
14.0 16.0 15.0 ZSM-1416-15 24.0 27.0 25.0 ZSM-2427-25 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
260 Online tools and more information www.igus.eu/z 3D-CAD files, prices and delivery time online www.igus.eu/z 261
ZFM iglidur® Z | Product range iglidur® Z | Product range ZFM
30
m
r d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
°
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
45.0 50.0 58.0 50.0 2.0 ZFM-4550-50 60.0 65.0 73.0 50.0 2.5 ZFM-6065-50
+0.025 +0.030
50.0 55.0 63.0 20.0 2.0 ZFM-5055-20 75.0 80.0 88.0 50.0 2.5 ZFM-7580-50
d2
d3
d1
+0.125 +0.150
50.0 55.0 63.0 50.0 2.0 ZFM-5055-50 75.0 80.0 94.0 65.0 3.0 ZFM-758094-65
3)
After press-fit. Testing methods Page 57
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
262 Online tools and more information www.igus.eu/z 3D-CAD files, prices and delivery time online www.igus.eu/z 263
ZTM iglidur® Z | Product range
Thrust Washer (Form T)
d1
Order key
s
d2
d5
d4
iglidur® material
d6
Thickness s
Outer-Ø d2
h
Inner-Ø d1
Form T
Metric
Dimensions according to ISO 3547-1
and special dimensions
Dimensions [mm]
d1 d2 s d4 d5 h d6 Part No.
+0.25 –0.25 –0.05 –0.12 +0.375 +0.2 +0.12
+0.12 +0.125 –0.2
14.0 30.0 1.5 25+/-0.20 2+0.10 1.0 30.0 ZTM-1430-015
15.0 27.0 1.5 4) 4)
1.0 27.0 ZTM-1527-015
15.0 35.0 1.5 4) 4)
1.0 35.0 ZTM-1535-015
15.0 40.0 1.5 4) 4)
1.0 35.0 ZTM-1540-015
16.0 23.0 1.5 4) 4)
1.0 23.0 ZTM-1623-015
20.0 36.0 1.5 28.0 3.0 1.0 36.0 ZTM-2036-015
22.0 38.0 1.5 30.0 3.0 1.0 38.0 ZTM-2238-015
4)
Design without fixing bore
Load [MPa]
1.0
●● Glass industry
●● Food industry Medium Resistance
0.1
●● Fluid technology 0.001 0.01 0.1 1.0 10.0 Alcohol +
●● Textile industry Surface speed [m/s] Hydrocarbons +
●● Machine building Diagram 01: Permissible pv values for iglidur® X6 bearings Greases, oils without additives +
Available from stock
with a wall thickness of 1 mm dry running against a steel Fuels +
Detailed information about delivery time online.
shaft, at +20 °C, mounted in a steel housing Diluted acids +
Block pricing online Strong acids +
Moisture absorption Diluted alkalines +
No minimum order value. From batch size 1.
The moisture absorption of iglidur® X6 plain bearings is Strong alkalines +
approximately 0.1 % weight in standard climatic conditions.
Max. +250 °C + resistant 0 conditionally resistant – not resistant
The saturation limit submerged in water is 0.5 % weight.
Min. –100 °C All data given at room temperature [+20 °C]
These values are so low that a moisture expansion need
Table 02: Chemical resistance
to be considered only in extreme cases.
Ø 3–50 mm
More dimensions upon request Diagram, www.igus.eu/x6-moisture Chemical table, page 1478
Vacuum
Online product finder
In vacuum environment iglidur® X6 plain bearings can be
www.igus.eu/iglidur-finder
used virtually without restrictions.
266 Online tools and more information www.igus.eu/x6 3D-CAD files, prices and delivery time online www.igus.eu/x6 267
X6 X6
+250 °C iglidur X6 | Technical data
®
iglidur X6 | Technical data ® +250 °C
150 MPa 150 MPa
0.35 50
With respect to its general mechanical and thermal speci Permissible surface speeds 45
0.30
fications, iglidur® X6 is directly comparable to our high- The high temperature resistance and good thermal conduc- 40 rotating
0.25 oscillating
temperature classic, iglidur® X, and may even provide tivity values mean than iglidur® X6 is suitable for high speed 35
Wear [µm/km]
Mechanical properties though, this temperature level is rarely reached due to varying 0.10 15
With increasing temperatures, the compressive strength of application conditions. 10
0.05
5
iglidur® X6 plain bearings decreases. The diagram 02 shows
Surface speed, page 44 0.00 0
this inverse relationship. The recommended maximum 0 10 20 30 40 50 60 70 80 90 0 1 2 3 4 5 6 7 8 9 10
surface pressure is a mechanical material parameter. No m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be Continuous 1.5 1.1 5 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. Short-term 3.5 2.5 10 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
steel, as a function of the pressure
Table 03: Maximum surface speeds
150
135 Temperatures Shaft materials Installation tolerances
120
The ambient temperatures greatly influence the wear per- The friction and wear are also dependent, to a large degree, iglidur® X6 plain bearings are standard bearings for shafts
105
90 formance of plastic bearings. The temperature resistance on the shaft material. Shafts that are too smooth, increase with h-tolerance (recommended minimum h9). The bea-
75 of iglidur® X6 is among the highest in the iglidur® range. both the coefficient of friction and the wear of the bearing. rings are designed for pressfit into a housing machined to
60 In many tests it has shown a six times higher wear per- The best case for iglidur® X6 is a ground surface with an a H7 tolerance. After being assembled into a nominal size
45
Load [MPa]
formance compared to the established high-temperature average roughness Ra = 0.4–0.7 μm. Diagram 06 shows housing, in standard cases the inner diameter automatically
30
15 specialist iglidur® X. iglidur® X6 bearings require additional results of testing different shaft materials with plain bearings adjusts to the F10 tolerances. For particular dimensions the
0 axial securing only above +165 °C. made from iglidur® X6. The best performance is achieved tolerance differs depending on the wall thickness (please
20 50 80 120 150 200 250 with the plain shaft materials free cutting steel and plain see product range table). In relation to the installation tole-
Temperature [°C] Application temperatures, page 49
steel 1.0037. At higher loads, we recommend harder steel rance, the inner diameter changes with the absorption of
Diagram 02: Recommended maximum surface pressure Additional securing, page 49
qualities. Non-hardened steel shafts can be worn by the humidity.
as a function of temperature (150 MPa at +20 °C)
bearing at pressures over 2 MPa. The wear database
Friction and wear
shows that iglidur® X6 is more suitable for rotating than for Testing methods, page 57
Similar to wear resistance, the coefficient of friction μ also
Diagram 03 shows the elastic deformation of iglidur® X6 oscillating applications (diagram 07). If the shaft material
changes with the load. The coefficient of friction of iglidur® X6
at radial load. At the recommended maximum surface you plan on using is not shown in these test results, please Diameter Shaft iglidur® X6 Housing
declines with higher pressure and is practically constant for
pressure of 100 MPa the deformation is less than 2 %. A contact us. d1 [mm] h9 [mm] F10 [mm] H7 [mm]
pressures above 30 MPa. A higher speed of the shaft also
possible deformation could be, among others, dependant up to 3 0–0.025 +0.006 +0.046 0 +0.010
results in a lower coefficient of friction (diagram 04 and 05). Shaft materials, page 52
on the duty cycle of the load. > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
Coefficients of friction and surfaces, page 47 iglidur X6 ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
Surface pressure, page 41 Wear resistance, page 50 C. o. f. µ 0.09–0.25 0.09 0.04 0.04 > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Table 04: Coefficient of friction against steel (Ra = 1µm, > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
50 HRC) > 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
3.0 0.40 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
+23 °C +60 °C
2.5 0.35 7 Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
Coefficient of friction [µ]
2.0 6
0.30
1.5 5
3
0.20
Wear [µm/km]
0.5
2
304 SS
0.0 0.15
1 Cf53
0 30 60 90 120 150 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s] 0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 0.75 MPa p = 1 MPa, v = 0.3 m/s
268 Online tools and more information www.igus.eu/x6 3D-CAD files, prices and delivery time online www.igus.eu/x6 269
X6SM iglidur® X6 | Product range iglidur® X6 | Product range X6FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
270 Online tools and more information www.igus.eu/x6 3D-CAD files, prices and delivery time online www.igus.eu/x6 271
iglidur®
X6 My sketches
Load [MPa]
●● Plant construction 1.0 iglidur® V400 plain bearings are resistant to UV radiation
●● Automotive to a large extent.
●● Automation 0.1
●● Aerospace engineering 0.001 0.01 0.1 1.0 10.0
Medium Resistance
Surface speed [m/s]
●● Mechatronics Alcohol +
Available from stock Diagram 01: Permissible pv values for iglidur® V400
Detailed information about delivery time online. bearings with a wall thickness of 1 mm dry running against Hydrocarbons +
a steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
Block pricing online Fuels +
No minimum order value. From batch size 1. Diluted acids +
Moisture absorption Strong acids +
The moisture absorption of iglidur® V400 plain bearings is Diluted alkalines +
Max. +200 °C
only 0.2 % weight after saturation in water. Strong alkalines –
Min. –50 °C
Diagram, www.igus.eu/v400-moisture + resistant 0 conditionally resistant – not resistant
Ø 6–20 mm All data given at room temperature [+20 °C]
Vacuum
More dimensions upon request Table 02: Chemical resistance
In a vacuum, iglidur® V400 plain bearings can only be used
to a limited degree. Outgassing takes place. Chemical table, page 1478
Online product finder
www.igus.eu/iglidur-finder
274 Online tools and more information www.igus.eu/v400 3D-CAD files, prices and delivery time online www.igus.eu/v400 275
V400 V400
+200 °C iglidur V400 | Technical data
®
iglidur V400 | Technical data ® +200 °C
45 MPa 45 MPa
0.35 200
iglidur® V400 bearings are not suitable for high pressures Permissible surface speeds 180
0.30
or static high loads. However they are characterised by iglidur® V400 also permits high surface speeds due to the 160 rotating oscillating
a high wear resistance all the way up to the maximum high temperature resistance. The very favourable coeffi- 0.25 140
Wear [µm/km]
Mechanical properties for linear movement and 3 m/s can be attained on the 0.10 60
With increasing temperatures, the compressive strength short-term. 40
0.05
20
of iglidur® V400 plain bearings decreases. The diagram
Surface speed, page 44 0.00 0
02 shows this inverse relationship. The recommended 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 30 35 40 45
maximum surface pressure is a mechanical material m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
parameter. No conclusions regarding the tribological Continuous 0.9 0.6 2 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
properties can be drawn from this. Short-term 1.3 0.9 3 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
steel, as a function of the pressure
Table 03: Maximum surface speeds
80
70 Temperatures Shaft materials Installation tolerances
60 The long-term maximum permissible application temperature The influence of the shaft material on the wear resistance iglidur® V400 plain bearings are standard bearings for
50 is +200 °C. For temperatures over +100 °C and additional is bigger than on the friction. Here, even at low loads (0.75 shafts with h-tolerance (recommended minimum h9). The
40 securing is required. Then, however, the wear resistance MPa), significant differences occur, as shown in diagram bearings are designed for pressfit into a housing machined
30 of the bearings is very good and adopts a leading position 06. With regard to wear, iglidur® V400 is more suitable to a H7 tolerance. After being assembled into a nominal size
Load [MPa]
20 among all iglidur® materials. The compressive strength of for rotating applications rather than oscillating applications housing, in standard cases the inner diameter automatically
10 iglidur® V400 plain bearings decreases with increasing tem- (diagram 07). adjusts to the F10 tolerances. For particular dimensions the
0 peratures. Diagram 02 shows this relationship. tolerance differs depending on the wall thickness (please
20 50 80 120 150 200 Shaft materials, page 52 see product range table).
Temperature [°C] Application temperatures, page 49
Diagram 02: Permissible maximum surface pressure of Additional securing, page 49
iglidur® V400 Dry Greases Oil Water Testing methods, page 57
as a function of temperature (45 MPa at +20 °C)
Friction and wear C. o. f. µ 0.15–0.20 0.09 0.04 0.04
The coefficient of friction is dependent on the bearing‘s Table 04: Coefficient of friction against steel (Ra = 1µm, Diameter Shaft iglidur® V400 Housing
Moreover the limit of the permitted loads at +100 °C is still stressing capacity (diagrams 04 and 05). The coefficients of 50 HRC) d1 [mm] h9 [mm] F10 [mm] H7 [mm]
high with 20 MPa. The high elasticity is shown in diagram 03. friction of iglidur® V400 are very constant. No other iglidur® up to 3 0–0.025 +0.006 +0.046 0 +0.010
bearing material exhibits a lower variance in the coefficients 12
> 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
Surface pressure, page 41 of friction, even when the shaft material is altered. 11 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
10
9
> 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Coefficients of friction and surfaces, page 47
HR carbon steel
H.a. aluminium
5 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
Wear [µm/km]
5.0 0.5 4
3 Table 05: Important tolerances for plain bearings
304 SS
2
Cf53
according to ISO 3547-1 after pressfit
0.4 1
+23 °C +60 °C 0
Coefficient of friction [µ]
0.2
0.0 0.1
0 15 30 45 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
276 Online tools and more information www.igus.eu/v400 3D-CAD files, prices and delivery time online www.igus.eu/v400 277
VSM iglidur® V400 | Product range iglidur® V400 | Product range VFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
278 Online tools and more information www.igus.eu/v400 3D-CAD files, prices and delivery time online www.igus.eu/v400 279
iglidur®
V400 My sketches
Sterilisable
Continuous use up to +180 °C
High media resistance
Corrosion-resistant
For wet environments
Lubrication and maintenance-free
Standard range from stock
282 Online tools and more information www.igus.eu/hsd350 3D-CAD files, prices and delivery time online www.igus.eu/hsd350 283
HSD350SM iglidur® HSD350 | Product range iglidur® HSD350 | Product range HSD350FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
284 Online tools and more information www.igus.eu/hsd350 3D-CAD files, prices and delivery time online www.igus.eu/hsd350 285
iglidur®
HSD350 My sketches
With respect to the use of the material in direct contact with water, it has to be pointed out that all results have been attained under laboratory
6)
required conditions DW (fully demineralised water). We therefore recommend custom-designed tests under real application conditions.
iglidur® G, page 79
Table 01: Material properties table
Typical application areas
1,000.0
●● Plant construction Vacuum
●● Pumps Also in vacuum, iglidur® UW500 plain bearings can be used
100.0
●● Chemical industry almost without restrictions.
10.0
Medium Resistance
Alcohol +
Load [MPa]
1.0
Hydrocarbons +
Available upon request 0.1
Greases, oils without additives +
Detailed information about delivery time online. 0.001 0.01 0.1 1.0 10.0 Fuels +
Surface speed [m/s] Diluted acids +
Diagram 01: Permissible pv values for iglidur® UW500 Strong acids +
Order-related bearings with a wall thickness of 1 mm dry running against Diluted alkalines +
a steel shaft, at +20 °C, mounted in a steel housing Strong alkalines +
Max. +250 °C + resistant 0 conditionally resistant – not resistant
Moisture absorption
Min. –100 °C All data given at room temperature [+20 °C]
The moisture absorption of iglidur® UW500 plain bearings in
Table 02: Chemical resistance
standard climatic conditions is below 0.1 % weight. The maxi-
Order-related mum moisture absorption is 0.5 % weight. iglidur® UW500 Chemical table, page 1478
plain bearings can be used for underwater applications.
288 Online tools and more information www.igus.eu/uw500 3D-CAD files, prices and delivery time online www.igus.eu/uw500 289
UW500 UW500
+250 °C iglidur UW500 | Technical data
®
iglidur UW500 | Technical data ® +250 °C
140 MPa 140 MPa
15 0.5 200
Radiation resistance 180
Plain bearings of iglidur® UW500 are resistant up to a +23 °C +60 °C 160 rotating oscillating
0.4
radiation intensity of 1 · 105 Gy. They resist to hard gamma 140
Deformation [%]
80
Wear [µm/km]
5 60
0.2
UV resistance 40
20
iglidur® UW500 bearings are permanently resistant to UV
0 0.1 0
radiation. 0 50 100 140 0.05 0.10 0.15 0.20 0.25 0.30 0 1 2 3 4 5 6 7 8 9 10
Load [MPa] Surface speed [m/s] Load [MPa]
The plain bearings of iglidur® UW500 were developed for Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
underwater applications with high temperatures. Examples surface speed, p = 0.75 MPa tions with shaft material Cf53 hardened and ground
for this are water pumps in automotive engineering, but also steel, as a function of the pressure
the field of medical engineering and related sectors. Unless Permissible surface speeds 0.7
the underwater operation is explicitly stated, the information iglidur UW500 bearings can be used both dry running and
®
0.6
in this chapter describes iglidur® UW500 when running dry. in media like water in a wide range of conditions. Through 0.5
HR carbon steel
H.a. aluminium
304 SS
Wear resistance, page 50 5 Cf53
0
Diagram 06: Wear, rotating with different shaft materials,
p = 1 MPa, v = 0.3 m/s
290 Online tools and more information www.igus.eu/uw500 3D-CAD files, prices and delivery time online www.igus.eu/uw500 291
iglidur plain bearing materials
®
Coefficient of friction
Temperature [°C] 123)
Price index
in terms of temperatures, the "iglidur® H family" Detailed information about delivery time online.
[MPa] 124)
is characterised by a high media resistance and
[µ] 125)
a wide range of applications in wet areas. Block pricing online
iglidur® H370 is the specialist for underwater No minimum order value. From batch size 1. 200 110
applications, iglidur® H2 is the media resistant, iglidur® H2 – The low-cost specialist for chemicals
0.32 4.80
low-cost bearing solution for high volume Ø 3–75 mm and temperatures
production with low running performance and More dimensions upon request Up to +200 °C, for high static load
iglidur® H1, the endurance runner of this group. Page 329
●● Lubrication and maintenance-free Imperial dimensions available
●● Lightweight From page 1391 123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
●● Good price / performance ratio 125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
●● Predictable service life Online product finder
www.igus.eu/iglidur-finder
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
[µ] 125)
200
iglidur® H1 – Endurance runner with high
media resistance 80
200
200
iglidur® H – The classic with high resistance to This bottle-filling system for thin to viscous materials Corrosion resistant iglidur® bearings in use in a meat
90
media and temperature works fast and precisely, thanks to numerous igus® roller - also resistant to aggressive detergents.
Up to +200 °C 0.17 2.10 products.
Page 313
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
294 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 295
Endurance runner with high media
resistance – iglidur H1 ®
296
H1
iglidur®
H1 iglidur H1 | Endurance runner with high media
®
iglidur H1 | Technical data
® +200 °C
80 MPa
resistance Material properties
Excellent coefficients of friction and wear General properties Unit iglidur® H1 Testing method
Density g/cm3 1.53
High wear resistance in iglidur® H1 is the first choice when long life is Colour cream
extreme ambient conditions required in extreme environmental conditions. Max. moisture absorption at +23 °C/50 % r.h. % weight 0.1 DIN 53495
Extreme wear resistance is coupled with excellent Max. water absorption % weight 0.3
resistance to temperature and chemicals – not Coefficient of sliding friction, dynamic, against steel µ 0.06–0.20
only in the packaging and foodstuff industries or pv value, max. (dry) MPa · m/s 0.8
the automotive industry. Mechanical properties
Flexural modulus MPa 2,800 DIN 53457
Very low coefficient Flexural strength at +20 °C MPa 55 DIN 53452
of friction Compressive strength MPa 78
When to use it? Max. recommended surface pressure (+20 °C) MPa 80
●● When extreme service life is required under Shore-D hardness 77 DIN 53505
the influence of temperature and humidity Physical and thermal properties
●● When low coefficients of friction at high Max. long-term application temperature °C +200
High resistance to temperature are important Max. short-term application temperature °C +240
temperature and chemicals ●● When normal aggressive cleaning is required Min. long-term application temperature °C –40
(splashes, steam blasting) Heat conductivity W/m · K 0.24 ASTM C 177
●● When the bearings are used in the engine Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
6 DIN 53752
compartment Electrical properties
Specific contact resistance Ωcm > 1012 DIN IEC 93
Surface resistance Ω > 10 11
DIN 53482
For underbonnet Table 01: Material properties table
applications
When not to use it? 100.0
Radiation resistance
●● When high surface pressures occur
Resistant to radiation up to an intensity of 2 · 10² Gy.
iglidur® Z, page 255
10.0
●● When the best universal chemical resistance
UV resistance
is required
iglidur® H1 bearings are only conditionally resistant to UV
iglidur® X, page 245 1.0 radiation.
Load [MPa]
●● When a cost-effective high temperature
bearing is required, not the ideal wear
resistance 0.1
Medium Resistance
Available from stock Alcohol +
iglidur® H2, page 329 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Surface speed [m/s] Hydrocarbons +
●● When an FDA-compliant plain bearing with
Diagram 01: Permissible pv values for iglidur® H1 bearings Greases, oils without additives +
high temperature resistance is required
Block pricing online with a wall thickness of 1 mm dry running against a steel Fuels +
iglidur® A500, page 355
No minimum order value. From batch size 1. shaft, at +20 °C, mounted in a steel housing Diluted acids + to 0
Typical application areas Strong acids + to –
Max. +200 °C Moisture absorption Diluted alkalines +
●● Beverage technology
Min. –40 °C The moisture absorption of iglidur® H1 bearings is about Strong alkalines + to –
●● Automation
0.1 % weight in standard climatic conditions. The saturation
●● Packaging + resistant 0 conditionally resistant – not resistant
Ø 3–50 mm limit in water is 0.3 % weight. Therefore iglidur® H1 is very
●● Textile industry All data given at room temperature [+20 °C]
More dimensions upon request well suited for use in wet environments.
●● Optical industry Table 02: Chemical resistance
Diagram, www.igus.eu/h1-moisture
Imperial dimensions available
Chemical table, page 1478
From page 1391 Vacuum
For use in a vacuum environment, it must be taken into
Online product finder account that a small amount of moisture is released as
www.igus.eu/iglidur-finder vapour. The use in vacuum is generally possible.
298 Online tools and more information www.igus.eu/h1 3D-CAD files, prices and delivery time online www.igus.eu/h1 299
H1 H1
+200 °C iglidur H1 | Technical data
®
iglidur H1 | Technical data ® +200 °C
80 MPa 80 MPa
0.20 7
iglidur® H1 plain bearings have been specially developed Permissible surface speeds
6
for use under extreme environmental conditions. Their Due to the excellent coefficients of friction, rotating surface
0.15
strengths are the extremely high wear resistance and the speeds up to 2 m/s are possible with iglidur® H1 plain 5
Wear [µm/km]
aggressive chemicals. iglidur® H1 bearings can be used the lowest bearing loads. With higher loads, the permitted 2
0.05
completely free of lubrication; in wet area applications, the speed drops with the extent of the load due to the limitations
1
surrounding medium acts as additional lubricant. by the pv value.
0.00 0
Surface speed, page 44 0 10 20 30 40 50 60 70 80 Cf53 hard 304 SS HR carbon
Mechanical properties Load [MPa] chromed steel
With increasing temperatures, the compressive strength m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the rotating oscillating
of iglidur® H1 bearings decreases. The diagram 02 shows Continuous 2 1.0 5 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
this inverse relationship. The recommended maximum Short-term 2.5 1.5 7 tions with different shaft materials, p = 2 MPa
surface pressure is a mechanical material parameter. No
Table 03: Maximum surface speeds
conclusions regarding the tribological properties can be
Shaft materials Installation tolerances
drawn from this.
Diagrams 06 and 07 display a summary of the results of tests iglidur® H1 bearings are standard bearings for shafts with
80 Temperatures with different shaft materials conducted with iglidur® H1 h-tolerance (recommended minimum h9). The bearings
70 iglidur® H1 is an extremely temperature-resistant materi- plain bearings in the igus® laboratory. are designed for pressfit into a housing machined to a
60 al. The temperatures prevailing in the bearing system also The iglidur ® H1 plain bearings display excellent wear H7 tolerance. After being assembled into a nominal size
50 have an influence on the bearing wear. The wear rate rises behaviour in combination with a wide variety of shaft housing, in standard cases the inner diameter automatically
40 with increasing temperatures. In iglidur® H1 in particular, this materials both in rotating and pivoting operations. On the adjusts to the F10 tolerances. For particular dimensions the
30 increase however is very low. At temperatures over +80 °C 304 stainless steel shafts in particular, iglidur® H1 attains tolerance differs depending on the wall thickness (please
Load [MPa]
20 an additional securing is required. very low wear rates both in rotating and pivoting operations. see product range table).
10 Even on hard-coated aluminium shafts, iglidur® H1 plain
Application temperatures, page 49
0 bearings attain high service life in rotating applications with Testing methods, page 57
20 50 80 120 150 200 Additional securing, page 49
low to medium loads.
Temperature [°C]
Diagram 02: Permissible maximum surface pressure of Diameter Shaft iglidur® H1 Housing
Shaft materials, page 52 d1 [mm] h9 [mm] F10 [mm] H7 [mm]
as a function of temperature (80 MPa at +20 °C) Friction and wear
The coefficient of friction alters like the wear resistance with up to 3 0–0.025 +0.006 +0.046 0 +0.010
Diagram 03 shows the elastic deformation of iglidur H1 ®
increasing load and speed (diagrams 04 and 05). iglidur® H1 Dry Greases Oil Water > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
at radial load. Among the iglidur® H materials, iglidur® H1 C. o. f. µ 0.06–0.20 0.09 0.04 0.04 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
Coefficients of friction and surfaces, page 47 > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
material has the greatest elasticity. This must be considered Table 04: Coefficient of friction against steel (Ra = 1µm,
Wear resistance, page 50 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
for applications with high pressure or strong edge pressure. 50 HRC)
> 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
Surface pressure, page 41 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
12
Table 05: Important tolerances for plain bearings
10
7 0.25 according to ISO 3547-1 after pressfit
HR carbon steel
5
H.a. aluminium
Coefficient of friction [µ]
Wear [µm/km]
4 0.15 4
304 SS
Deformation [%]
3 0.10 2
Cf53
2
0
0.05
1 Diagram 06: Wear, rotating with different shaft materials,
0 0.00 p = 1 MPa, v = 0.3 m/s
0 20 40 60 80 0.00 0.25 0.50 0.75 1.00 1.25 1.50 1.75 2.00
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
300 Online tools and more information www.igus.eu/h1 3D-CAD files, prices and delivery time online www.igus.eu/h1 301
H1SM iglidur® H1 | Product range iglidur® H1 | Product range H1SM
30°
h13 h13
Type Dimensions [mm]
30.0 34.0 20.0 H1SM-3034-20 40.0 44.0 30.0 H1SM-4044-30
30.0 +0.020 34.0 25.0 H1SM-3034-25 40.0 44.0 40.0 H1SM-4044-40
d1
d2
0.5 H1SM-3034-30 H1SM-4044-50
30.0 +0.104 34.0 30.0 40.0 44.0 50.0
30.0 34.0 40.0 H1SM-3034-40 45.0 50.0 20.0 H1SM-4550-20
30°
iglidur® material
32.0 36.0 20.0 H1SM-3236-20 45.0 50.0 30.0 H1SM-4550-30
b1
32.0 36.0 30.0 H1SM-3236-30 45.0 +0.025 50.0 40.0 H1SM-4550-40
Outer-Ø d2
Inner-Ø d1
Length b1
32.0 36.0 40.0 H1SM-3236-40 45.0 +0.125 50.0 50.0 H1SM-4550-50
Form S
Metric
35.0 +0.025 39.0 20.0 H1SM-3539-20 50.0 55.0 20.0 H1SM-5055-20
2)
Thickness < 1 mm: chamfer = 20° 35.0 +0.125 39.0 30.0 H1SM-3539-30 50.0 55.0 30.0 H1SM-5055-30
35.0 39.0 40.0 H1SM-3539-40 50.0 55.0 40.0 H1SM-5055-40
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 35.0 39.0 50.0 H1SM-3539-50 50.0 55.0 50.0 H1SM-5055-50
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 40.0 44.0 20.0 H1SM-4044-20 50.0 55.0 60.0 H1SM-5055-60
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available 3)
After press-fit. Testing methods Page 57
From page 1404
Dimensions [mm]
d1 d1-Tolerance3) d2 b1 Part No. d1 d1-Tolerance3) d2 b1 Part No.
h13 h13
+0.006 15.0 17.0 20.0 H1SM-1517-20
3.0 4.5 5.0 H1SM-0304-05
+0.046 15.0 17.0 25.0 H1SM-1517-25
4.0 5.5 4.0 H1SM-0405-04 16.0 18.0 15.0 H1SM-1618-15
4.0 5.5 6.0 H1SM-0405-06 16.0 +0.016 18.0 20.0 H1SM-1618-20
5.0 7.0 5.0 H1SM-0507-05 16.0 +0.086 18.0 25.0 H1SM-1618-25
+0.010
5.0 7.0 10.0 H1SM-0507-10 18.0 20.0 15.0 H1SM-1820-15
+0.058
6.0 8.0 6.0 H1SM-0608-06 18.0 20.0 20.0 H1SM-1820-20
6.0 8.0 8.0 H1SM-0608-08 18.0 20.0 25.0 H1SM-1820-25
6.0 8.0 10.0 H1SM-0608-10 20.0 23.0 10.0 H1SM-2023-10
8.0 10.0 8.0 H1SM-0810-08 20.0 23.0 15.0 H1SM-2023-15
8.0 10.0 10.0 H1SM-0810-10 20.0 23.0 20.0 H1SM-2023-20
8.0 10.0 12.0 H1SM-0810-12 20.0 23.0 25.0 H1SM-2023-25
8.0 10.0 15.0 H1SM-0810-15 20.0 23.0 30.0 H1SM-2023-30
+0.013
10.0 12.0 8.0 H1SM-1012-08 22.0 25.0 15.0 H1SM-2225-15
+0.071
10.0 12.0 10.0 H1SM-1012-10 22.0 25.0 20.0 H1SM-2225-20
10.0 12.0 12.0 H1SM-1012-12 22.0 25.0 25.0 H1SM-2225-25
10.0 12.0 15.0 H1SM-1012-15 22.0 25.0 30.0 H1SM-2225-30
10.0 12.0 20.0 H1SM-1012-20 24.0 +0.020 27.0 15.0 H1SM-2427-15
12.0 14.0 10.0 H1SM-1214-10 24.0 +0.104 27.0 20.0 H1SM-2427-20
12.0 14.0 12.0 H1SM-1214-12 24.0 27.0 25.0 H1SM-2427-25
12.0 14.0 15.0 H1SM-1214-15 24.0 27.0 30.0 H1SM-2427-30
12.0 14.0 20.0 H1SM-1214-20 25.0 28.0 15.0 H1SM-2528-15
13.0 +0.016 15.0 10.0 H1SM-1315-10 25.0 28.0 20.0 H1SM-2528-20 Couldn't find your size?
13.0 +0.086 15.0 20.0 H1SM-1315-20 25.0 28.0 25.0 H1SM-2528-25 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
14.0 16.0 15.0 H1SM-1416-15 25.0 28.0 30.0 H1SM-2528-30 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
14.0 16.0 20.0 H1SM-1416-20 28.0 32.0 20.0 H1SM-2832-20
14.0 16.0 25.0 H1SM-1416-25 28.0 32.0 25.0 H1SM-2832-25 Even more dimensions from stock
15.0 17.0 15.0 H1SM-1517-15 28.0 32.0 30.0 H1SM-2832-30 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
302 Online tools and more information www.igus.eu/h1 3D-CAD files, prices and delivery time online www.igus.eu/h1 303
H1FM iglidur® H1 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
10.0 12.0 18.0 9.0 1.0 H1FM-1012-09 25.0 28.0 35.0 11.5 1.5 H1FM-2528-11
+0.104
10.0 12.0 18.0 10.0 1.0 H1FM-1012-10 25.0 28.0 35.0 16.5 1.5 H1FM-2528-16
10.0 12.0 18.0 12.0 1.0 H1FM-1012-12 25.0 28.0 35.0 21.0 1.5 H1FM-2528-21 Wear-resistant – especially under water
10.0 12.0 18.0 17.0 1.0 H1FM-1012-17 30.0 34.0 42.0 16.0 2.0 H1FM-3034-16
12.0 14.0 20.0 7.0 1.0 H1FM-1214-07 30.0 34.0 42.0 26.0 2.0 H1FM-3034-26 High temperature resistance –40 °C to +200 °C
12.0 14.0 20.0 9.0 1.0 H1FM-1214-09 35.0 39.0 47.0 16.0 2.0 H1FM-3539-16
12.0 14.0 20.0 12.0 1.0 H1FM-1214-12 35.0 39.0 47.0 26.0 2.0 H1FM-3539-26 High chemical resistance
+0.016 +0.025
12.0 14.0 20.0 17.0 1.0 H1FM-1214-17 40.0 44.0 52.0 30.0 2.0 H1FM-4044-30
12.0
+0.086
14.0 20.0 20.0 1.0 H1FM-1214-20 40.0
+0.125
44.0 52.0 40.0 2.0 H1FM-4044-40 Lubrication and maintenance-free
14.0 16.0 22.0 12.0 1.0 H1FM-1416-12 45.0 50.0 58.0 50.0 2.0 H1FM-4550-50
14.0 16.0 22.0 17.0 1.0 H1FM-1416-17 Standard range from stock
3)
After press-fit. Testing methods Page 57
Load [MPa]
iglidur® H370 plain bearings are resistant to UV radiation.
Typical application areas
Available from stock 0.1
●● Offshore 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Detailed information about delivery time online.
●● Marine engineering Surface speed [m/s] Alcohol +
●● Fluid technology Diagram 01: Permissible pv values for iglidur® H370 Hydrocarbons +
Block pricing online
●● Packaging bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
No minimum order value. From batch size 1.
●● Plant construction a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Max. +200 °C Diluted acids + to 0
Moisture absorption Strong acids + to –
Min. –40 °C
The moisture absorption of iglidur® H370 plain bearings is Diluted alkalines +
below 0.1 % weight in standard climatic conditions. The Strong alkalines +
Ø 3–75 mm
saturation limit in water is also below 0.1 % weight. For
More dimensions upon request + resistant 0 conditionally resistant – not resistant
this reason, iglidur® H370 plain bearings are often used for
All data given at room temperature [+20 °C]
underwater applications.
Imperial dimensions available Table 02: Chemical resistance
From page 1391 Diagram, www.igus.eu/h370-moisture
Chemical table, page 1478
Vacuum
Online product finder
In vacuum, the moisture content is released as vapour. Due
www.igus.eu/iglidur-finder
to its low moisture absorption, use in a vacuum is possible.
306 Online tools and more information www.igus.eu/h370 3D-CAD files, prices and delivery time online www.igus.eu/h370 307
H370 H370
+200 °C iglidur H370 | Technical data
®
iglidur H370 | Technical data ® +200 °C
75 MPa 75 MPa
0.25 22.5
iglidur® H370 is an advanced development of the iglidur® H Permissible surface speeds 20.0
series. The material is characterised by particularly low The maximum permitted surface speed is dependent 0.20 17.5
water absorption and clearly enhanced wear resistance. on whether the temperature in the bearing location rises
Wear [µm/km]
The maximum values stated in table 03 are valid only with 7.5
5.0
Mechanical properties minimum pressure loads and are often not attained in 0.05
2.5
With increasing temperatures, the compressive strength of practice.
0.00 0.0
iglidur® H370 bearings decreases. The diagram 02 shows 0 15 30 45 60 75 Cf53 hard 304 SS HR carbon
this inverse relationship. The recommended maximum Surface speed, page 44 Load [MPa] chromed steel
surface pressure is a mechanical material parameter. No Diagram 05: Coefficient of friction as a function of the rotating oscillating
conclusions regarding the tribological properties can be m/s Rotating Oscillating Linear pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
drawn from this. Continuous 1.2 0.8 4 tions with different shaft materials, p = 2 MPa
Short-term 1.5 1.1 5
80 Table 03: Maximum surface speeds
Shaft materials Installation tolerances
70
Diagrams 06 and 07 show the test results of iglidur® H370 iglidur® H370 bearings are standard bearings for shafts
60
Temperatures bearings running against various shaft materials. with h-tolerance (recommended minimum h9). The bearings
50
With increasing temperatures, the compressive strength For loads up to 2 MPa in rotating applications, the hard- are designed for pressfit into a housing machined to a
40
of iglidur® H370 bearings decreases. The temperatures chromed shaft is the best material for the iglidur® H370 H7 tolerance. After being assembled into a nominal size
30
prevailing in the bearing system also have an influence on bearings. The high wear values with 304 stainless steel housing, in standard cases the inner diameter automatically
Load [MPa]
20
the bearing wear. The wear rises with increasing tempera- shafts, which due to their extremely smooth surfaces are adjusts to the F10 tolerances. For particular dimensions the
10
tures. At temperatures over +100 °C an additional securing prone to the stick-slip effect, are striking. Despite same tolerance differs depending on the wall thickness (please
0
20 50 80 120 150 200 is required. values in the lowest range, the HR carbon steel shaft shows see product range table).
Temperature [°C] already better values than Cf53 with loads of 2 MPa. On
Diagram 02: Permissible maximum surface pressure of Application temperatures, page 49 the other hand, the 304 stainless steel shaft shows a clear Testing methods, page 57
as a function of temperature (75 MPa at +20 °C) Additional securing, page 49 advantage in pivoting movements.
Diameter Shaft iglidur® H370 Housing
Shaft materials, page 52 d1 [mm] h9 [mm] F10 [mm] H7 [mm]
Diagram 03 shows the elastic deformation of iglidur® H370 Friction and wear
bearings at radial load. At the maximum recommended The coefficient of friction alters only little, like the wear resi- up to 3 0–0.025 +0.006 +0.046 0 +0.010
surface pressure of 75 MPa, the deformation at room tem- stance with increasing load and surface speed (diagrams iglidur® H370 Dry Greases Oil Water > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
perature is about 2.5 %. 04 and 05). C. o. f. µ 0.07–0.17 0.09 0.04 0.04 > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
Table 04: Coefficient of friction against steel (Ra = 1µm, > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Surface pressure, page 41 Coefficients of friction and surfaces, page 47 50 HRC) > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
Wear resistance, page 50 > 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
> 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
8 0.4 8.0 Table 05: Important tolerances for plain bearings
7 7.0 according to ISO 3547-1 after pressfit
6 +23 °C +60 °C 6.0
0.3
5 5.0
HR carbon steel
H.a. aluminium
Deformation [%]
3 3.0
Wear [µm/km]
0.2
2 2.0
304 SS
Cf53
1 1.0
0 0.1 0.0
0 25 50 75 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
308 Online tools and more information www.igus.eu/h370 3D-CAD files, prices and delivery time online www.igus.eu/h370 309
H370SM iglidur® H370 | Product range iglidur® H370 | Product range H370SM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
28.0 32.0 30.0 H370SM-2832-30 40.0 44.0 40.0 H370SM-4044-40
30.0 34.0 20.0 H370SM-3034-20 40.0 44.0 50.0 H370SM-4044-50
d1
d2
0.5 +0.020
30.0 34.0 25.0 H370SM-3034-25 45.0 +0.025 50.0 20.0 H370SM-4550-20
+0.104
30.0 34.0 30.0 H370SM-3034-30 45.0 +0.125 50.0 30.0 H370SM-4550-30
30°
iglidur® material
30.0 34.0 40.0 H370SM-3034-40 45.0 50.0 40.0 H370SM-4550-40
b1
32.0 36.0 20.0 H370SM-3236-20 45.0 50.0 50.0 H370SM-4550-50
Outer-Ø d2
Inner-Ø d1
Length b1
32.0 36.0 30.0 H370SM-3236-30 50.0 55.0 20.0 H370SM-5055-20
Form S
Metric
32.0 36.0 40.0 H370SM-3236-40 50.0 55.0 30.0 H370SM-5055-30
2)
Thickness < 1 mm: chamfer = 20° +0.000
35.0 39.0 20.0 H370SM-3539-20 50.0 55.0 40.0 H370SM-5055-40
+0.025 +0.100
35.0 39.0 30.0 H370SM-3539-30 50.0 55.0 50.0 H370SM-5055-50
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 +0.125
35.0 39.0 40.0 H370SM-3539-40 50.0 55.0 60.0 H370SM-5055-60
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 35.0 39.0 50.0 H370SM-3539-50 55.0 60.0 26.0 H370SM-5560-26
f [mm]: 0.3 0.5 0.8 1.2 +0.030
Imperial dimensions available 40.0 44.0 20.0 H370SM-4044-20 60.0 65.0 60.0 H370SM-6065-60
+0.150
From page 1406 40.0 44.0 30.0 H370SM-4044-30 75.0 80.0 60.0 H370SM-7580-60
Dimensions [mm] 3)
After press-fit. Testing methods Page 57
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No.
Tolerance3) h13 Tolerance3) h13
+0.006 15.0 17.0 15.0 H370SM-1517-15
3.0 4.5 3.0 H370SM-0304-03
+0.046 15.0 17.0 20.0 H370SM-1517-20
4.0 5.5 4.0 H370SM-0405-04 15.0 17.0 25.0 H370SM-1517-25
4.0 5.5 6.0 H370SM-0405-06 16.0 18.0 15.0 H370SM-1618-15
+0.016
4.0 5.5 12.0 H370SM-0405-12 16.0 18.0 20.0 H370SM-1618-20
+0.086
5.0 +0.010 7.0 5.0 H370SM-0507-05 16.0 18.0 25.0 H370SM-1618-25
5.0 +0.058 7.0 10.0 H370SM-0507-10 18.0 20.0 15.0 H370SM-1820-15
6.0 8.0 6.0 H370SM-0608-06 18.0 20.0 20.0 H370SM-1820-20
6.0 8.0 8.0 H370SM-0608-08 18.0 20.0 25.0 H370SM-1820-25
6.0 8.0 10.0 H370SM-0608-10 20.0 23.0 10.0 H370SM-2023-10
8.0 10.0 8.0 H370SM-0810-08 20.0 23.0 15.0 H370SM-2023-15
8.0 10.0 10.0 H370SM-0810-10 20.0 23.0 20.0 H370SM-2023-20
8.0 10.0 12.0 H370SM-0810-12 20.0 23.0 25.0 H370SM-2023-25
8.0 10.0 15.0 H370SM-0810-15 20.0 23.0 30.0 H370SM-2023-30
+0.013
10.0 12.0 8.0 H370SM-1012-08 22.0 25.0 15.0 H370SM-2225-15
+0.071
10.0 12.0 10.0 H370SM-1012-10 22.0 25.0 20.0 H370SM-2225-20
10.0 12.0 12.0 H370SM-1012-12 22.0 25.0 25.0 H370SM-2225-25
10.0 12.0 15.0 H370SM-1012-15 22.0 25.0 30.0 H370SM-2225-30
+0.020
10.0 12.0 20.0 H370SM-1012-20 24.0 27.0 15.0 H370SM-2427-15
+0.104
12.0 14.0 10.0 H370SM-1214-10 24.0 27.0 20.0 H370SM-2427-20
12.0 14.0 12.0 H370SM-1214-12 24.0 27.0 25.0 H370SM-2427-25
12.0 14.0 15.0 H370SM-1214-15 24.0 27.0 30.0 H370SM-2427-30
12.0 14.0 20.0 H370SM-1214-20 25.0 28.0 15.0 H370SM-2528-15 Couldn't find your size?
+0.016 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
13.0 15.0 10.0 H370SM-1315-10 25.0 28.0 20.0 H370SM-2528-20
+0.086 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
13.0 15.0 20.0 H370SM-1315-20 25.0 28.0 25.0 H370SM-2528-25
14.0 16.0 15.0 H370SM-1416-15 25.0 28.0 30.0 H370SM-2528-30
14.0 16.0 20.0 H370SM-1416-20 28.0 32.0 20.0 H370SM-2832-20 Even more dimensions from stock
14.0 16.0 25.0 H370SM-1416-25 28.0 32.0 25.0 H370SM-2832-25 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
310 Online tools and more information www.igus.eu/h370 3D-CAD files, prices and delivery time online www.igus.eu/h370 311
H370FM iglidur® H370 | Product range
Flange bearing (Form F)
.5 Order key
.0
ax
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
Outer-Ø d2
Inner-Ø d1
Length b1
b2
Form F
Metric
b1
2)
Thickness < 1 mm: chamfer = 20°
Load [MPa]
●● Offshore
iglidur® H plain bearings are only conditionally resistant to
●● Marine engineering
UV radiation.
●● Beverage technology 0.1
●● Medical technology 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
●● Mechatronics
Available from stock Diagram 01: Permissible pv values for iglidur® H bearings Alcohol +
Detailed information about delivery time online. with a wall thickness of 1 mm dry running against a steel Hydrocarbons +
shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
Block pricing online Fuels +
No minimum order value. From batch size 1. Moisture absorption Diluted acids + to 0
The moisture absorption of iglidur® H plain bearings is below Strong acids + to –
Max. +200 °C 0.1 % weight in standard climatic conditions. The saturation Diluted alkalines +
Min. –40 °C limit in water is 0.3 % weight. iglidur® H is very well suited Strong alkalines +
for use in wet applications.
+ resistant 0 conditionally resistant – not resistant
Ø 3–70 mm
Diagram, www.igus.eu/h-moisture All data given at room temperature [+20 °C]
More dimensions upon request
Table 02: Chemical resistance
Vacuum
Online product finder For use in a vacuum environment, it must be taken into Chemical table, page 1478
www.igus.eu/iglidur-finder account that a small amount of moisture is released as vapour.
314 Online tools and more information www.igus.eu/h 3D-CAD files, prices and delivery time online www.igus.eu/h 315
H H
+200 °C iglidur H | Technical data
®
iglidur H | Technical data ® +200 °C
90 MPa 90 MPa
0.20 45
iglidur ® H is a fibre-reinforced thermoplastic material Permissible surface speeds 40
especially developed for applications in high atmospheric The maximum permitted surface speed is dependent on 35
0.15
humidity or under water. Bearings made from iglidur® H can whether the temperature in the bearing location rises or not.
Wear [µm/km]
Linear movements enable higher surface speeds, as a large 15
0.05 10
Mechanical properties area of the shaft contributes to the cooling.
5
With increasing temperatures, the compressive strength of
Surface speed, page 44 0.00 0
iglidur® H plain bearings decreases. The diagram 02 shows 0 10 20 30 40 50 60 70 80 Cf53 hard 304 SS HR carbon
this inverse relationship. The recommended maximum Load [MPa] chromed steel
m/s Rotating Oscillating Linear
surface pressure is a mechanical material parameter. No Continuous 1 0.7 3 Diagram 05: Coefficient of friction as a function of the rotating oscillating
conclusions regarding the tribological properties can be Short-term 1.5 1.1 4 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
drawn from this. tions with different shaft materials, p = 2 MPa
Table 03: Maximum surface speeds
160
140 Temperatures Shaft materials Installation tolerances
120 With increasing temperatures, the compressive strength Diagrams 06 and 07 show the test results of iglidur® H iglidur® H plain bearings are standard bearings for shafts
100 of iglidur® H plain bearings decreases. The diagram 02 bearings running against various shaft materials. with h-tolerance (recommended minimum h9). The bearings
80 shows this inverse relationship. The ambient application The iglidur® H bearings give different results when used are designed for pressfit into a housing machined to a
60 temperature has a direct impact on bearing wear, an in rotating and pivoting applications with different shaft H7 tolerance. After being assembled into a nominal size
Load [MPa]
40 increase in temperature results in an increase in wear. materials. The Cf53 and HR carbon steel shafts give the housing, in standard cases the inner diameter automatically
20 At temperatures over +120 °C an additional securing is best wear values in rotating applications, whereas the 304 adjusts to the F10 tolerances. For particular dimensions the
0 required. stainless steel shafts (which are not so good for rotation) give tolerance differs depending on the wall thickness (please
20 30 40 50 120 130 the best results in oscillating applications. Hard chromed see product range table).
Temperature [°C] Application temperatures, page 49
shafts only give an advantage at low pressures when used
Diagram 02: Permissible maximum surface pressure of Additional securing, page 49
with iglidur® H bearings. Testing methods, page 57
as a function of temperature (90 MPa at +20 °C)
Friction and wear Shaft materials, page 52 Diameter Shaft iglidur® H Housing
Diagram 03 shows the elastic deformation of iglidur® H
Both the wear rate and the coefficient of friction values d1 [mm] h9 [mm] F10 [mm] H7 [mm]
at radial loads. At the recommended maximum surface
change depending on the pressure. Interestingly, the friction iglidur® H Dry Greases Oil Water up to 3 0–0.025 +0.006 +0.046 0 +0.010
pressure of 90 MPa the deformation is about 2.5 % at room
coefficient µ lowers slightly with the increase of surface C. o. f. µ 0.07–0.2 0.09 0.04 0.04 > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
temperature.
speed at constant load (see diagrams 04 and 05). > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
Table 04: Coefficient of friction against steel (Ra = 1µm,
Surface pressure, page 41 Coefficients of friction and surfaces, page 47 50 HRC) > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Wear resistance, page 50 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
> 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
> 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
3.5 0.4 18 Table 05: Important tolerances for plain bearings
3.0 according to ISO 3547-1 after pressfit
15
+23 °C +60 °C
2.5
0.3 12
HR carbon steel
H.a. aluminium
Deformation [%]
1.5
Wear [µm/km]
0.2 6
1.0
304 SS
0.5 3
Cf53
0.0 0.1 0
0 25 50 75 100 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
316 Online tools and more information www.igus.eu/h 3D-CAD files, prices and delivery time online www.igus.eu/h 317
HSM iglidur® H | Product range iglidur® H | Product range HFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
iglidur® material
iglidur® material
b1 b2
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 Chamfer in relation to the d1 Dimensions according to ISO 3547-1
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
f [mm]: 0.3 0.5 0.8 1.2 f [mm]: 0.3 0.5 0.8 1.2
318 Online tools and more information www.igus.eu/h 3D-CAD files, prices and delivery time online www.igus.eu/h 319
iglidur®
H My sketches
Load [MPa]
●● Valves 1.0
UV resistance
●● Chemical industry
iglidur® C500 plain bearings are permanently resistant to
●● Process technology 0.1
0.001 0.01 0.1 1.0 10.0 UV radiation.
Surface speed [m/s]
Diagram 01: Permissible pv values for iglidur® C500 Medium Resistance
Available from stock bearings with a wall thickness of 1 mm dry running against Alcohol +
Detailed information about delivery time online. a steel shaft, at +20 °C, mounted in a steel housing Hydrocarbons +
Greases, oils without additives +
Block pricing online Fuels +
Moisture absorption
No minimum order value. From batch size 1. Diluted acids +
The moisture absorption of iglidur® C500 plain bearings is
below 0.3 % weight in standard climatic conditions. The Strong acids +
Max. +250 °C Diluted alkalines +
saturation limit in water is also below 0.5 % weight.
Min. –100 °C Strong alkalines +
Diagram, www.igus.eu/c500-moisture + resistant 0 conditionally resistant – not resistant
Ø 6–40 mm
All data given at room temperature [+20 °C]
More dimensions upon request
Vacuum Table 02: Chemical resistance
iglidur® C500 plain bearings outgas in a vacuum. Due to
Online product finder
its low moisture absorption, use in a vacuum is possible. Chemical table, page 1478
www.igus.eu/iglidur-finder
322 Online tools and more information www.igus.eu/c500 3D-CAD files, prices and delivery time online www.igus.eu/c500 323
C500 C500
+250 °C iglidur C500 | Technical data
®
iglidur C500 | Technical data ® +250 °C
110 MPa 110 MPa
0.30 5
iglidur® C500 is a member of the family of extremely media Permissible surface speeds
and temperature resistant iglidur® materials X, X6 and A500. The maximum allowable sliding speed is based on the friction 0.25
4
This material is characterised by improved wear resistance heat generated at the bearing surface. The temperature
Wear [µm/km]
and dimensional integrity. The maximum values stated in 0.10
Mechanical properties
304 SS
table 03 are valid only with minimum pressure loads and 0.05 1
Cf53
With increasing temperatures, the compressive strength are often not attained in practice.
0.00 0
of iglidur® C500 plain bearings decreases. The diagram 02 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Diagram 06: Wear, rotating with different shaft materials,
shows this inverse relationship. However, at an operation Surface speed, page 44 Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
temperature of +200 °C the permissible surface pressure Diagram 04: Coefficient of friction as a function of the
is close to 20 MPa. The permissible maximum surface m/s Rotating Oscillating Linear surface speed, p = 1 MPa
pressure is a mechanical material parameter. No con Continuous 0.9 0.7 2.4 200
clusions regarding the tribological properties can be drawn 0.35 180
Short-term 1.1 1.0 2.8 rotating oscillating
160
from this. 0.30
Table 03: Maximum surface speeds 140
0.25 120
120
Wear [µm/km]
0.15 60
80 iglidur® C500 belongs to the most temperature resistant
40
0.10
iglidur® materials. Similar to all thermoplastics, with increa- 20
60
sing temperatures, the compressive strength of iglidur® C500 0.05 0
40 bearings decreases. The temperatures prevailing in the bea- 0.00 0 5 10 15 20 25 30 35 40 45
Load [MPa]
0 10 20 30 40 50 60 70 80 Load [MPa]
20 ring system also have an influence on the bearing wear. The
Load [MPa] Diagram 07: Wear for oscillating and rotating applica
wear rises with increasing temperatures. At temperatures
0 Diagram 05: Coefficient of friction as a function of the tions with shaft material Cf53 hardened and ground
20 50 80 120 150 200 250 over +130 °C an additional securing is required.
pressure, v = 0.01 m/s steel, as a function of the pressure
Temperature [°C]
Diagram 02: Permissible maximum surface pressure of Application temperatures, page 49
as a function of temperature (80 MPa at +20 °C) Additional securing, page 49
Shaft materials Installation tolerances
Diagram 06 shows the test results of iglidur® C500 bearings iglidur® C500 plain bearings are standard bearings for
Diagram 03 shows the elastic deformation of iglidur® C500 Friction and wear running against various shaft materials. shafts with h-tolerance (recommended minimum h9). The
bearings as a function of radial pressure. At the maximum The coefficients of friction and wear in iglidur® C500 are Using the example of a rotating motion at 1 MPa and a bearings are designed for pressfit into a housing machined
recommended surface pressure of 80 MPa, the deformation more favourable than in the other high temperature materi- speed of 0.3 m/s, it becomes apparent that iglidur® C500 to a H7 tolerance. After being assembled into a nominal size
at room temperature is only 4.5 %. als iglidur® X and A500. The friction value increases mode- has very consistent wear characteristics across a variety of housing, in standard cases the inner diameter automatically
rately as the sliding speed increases. The friction value ini- shaft types. This wear rate spikes upward in combination adjusts to the F10 tolerances.
Surface pressure, page 41 tially drops rapidly to less than 0.1 under loads of up to with free-machining steel, and, notably so, spikes down-
approx. 20 MPa, and then only marginally increases as ward in combination with HC aluminium. Testing methods, page 57
10 loads continue to increase. The wear under rotational loads is higher, specifically with
9 Friction and wear also depend to a high degree on the increasing radial loads as compared to pivoting motions
+23 °C +60 °C Diameter Shaft iglidur® C500 Housing
8
reverse partner. Shafts that are too smooth, increase both (diagram 07). d1 [mm] h9 [mm] F10 [mm] H7 [mm]
7
6 the coefficient of friction and the wear of the bearing. The up to 3 0–0.025 +0.006 +0.046 0 +0.010
5 ideal shaft has an average surface finish of Ra = 0.6 to Shaft materials, page 52 > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
Deformation [%]
324 Online tools and more information www.igus.eu/c500 3D-CAD files, prices and delivery time online www.igus.eu/c500 325
C500SM iglidur® C500 | Product range iglidur® C500 | Product range C500FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
326 Online tools and more information www.igus.eu/c500 3D-CAD files, prices and delivery time online www.igus.eu/c500 327
iglidur®
C500 My sketches
UV resistance
Load [MPa]
Typical application areas 1.0
The use of iglidur® H2 in applications that are permanently
●● Automotive
exposed to weathering should be checked.
●● Actuator 0.1
●● Bicycle industry 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
Diagram 01: Permissible pv values for iglidur® H2 bearings Alcohol +
Available upon request with a wall thickness of 1 mm dry running against a steel Hydrocarbons +
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
Fuels +
Moisture absorption Diluted acids + to 0
Order-related
The humidity absorption of iglidur® H2 bearings is about Strong acids + to –
0.1 % weight in standard climatic conditions. The saturation Diluted alkalines +
Max. +200 °C limit in water is 0.2 % weight. iglidur® H2 is an ideal material Strong alkalines +
Min. –40 °C for wet environments.
+ resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Diagram, www.igus.eu/h2-moisture
Order-related Table 02: Chemical resistance
330 Online tools and more information www.igus.eu/h2 3D-CAD files, prices and delivery time online www.igus.eu/h2 331
H2 H2
+200 °C iglidur H2 | Technical data
®
iglidur H2 | Technical data ® +200 °C
110 MPa 110 MPa
0.30 150
In applications with the iglidur® H2 bearings, economical Permissible surface speeds
aspects are in focus. It is the first time that it is possible In the development of iglidur® H2, cost aspects and 0.25 125
to offer such a high-performance bearing for large volume mechanical stability were in focus. The permitted surface
Wear [µm/km]
pressure up to 110 N/mm 2, and excellent chemical service. 0.10 50
With increasing temperatures, the compressive strength Continuous 0.9 0.6 2.5 Diagram 05: Coefficient of friction as a function of the rotating oscillating
of iglidur® H2 plain bearings decreases. The diagram 02 Short-term 1 0.7 3 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
shows this inverse relationship. The permissible maximum Table 03: Maximum surface speeds tions with different shaft materials, p = 2 MPa
surface pressure is a mechanical material parameter. No
conclusions regarding the tribological properties can be
Temperatures Shaft materials Installation tolerances
drawn from this.
iglidur® H2 is an extremely temperature-resistant material. Regarding the wear resistance of combinations with iglidur® H2 bearings are standard bearings for shafts with
160 The short-term permitted maximum temperature is +240 °C iglidur® H2, it must be indicated once again that this bearing h-tolerance (recommended minimum h9). The bearings
140 and this enables the iglidur® H2 bearings to be subjected, was developed for statically high mechanical stability. The are designed for pressfit into a housing machined to a
120 for instance to a paint drying process without further load. wear resistance however does not attain, with none of the H7 tolerance. After being assembled into a nominal size
100 The temperatures prevailing in the bearing system also bearing-shaft combinations, the values of iglidur® H370 with housing, in standard cases the inner diameter automatically
80 have an influence on the bearing wear. The wear rises with the corresponding shaft. adjusts to the F10 tolerances. For particular dimensions the
60 increasing temperatures. At temperatures over +110 °C an When the iglidur® H2 bearings are used, they should not tolerance differs depending on the wall thickness (please
Load [MPa]
40 additional securing is required. be combined with hard-chromed shafts. Shafts made from see product range table).
20 CF53 steel and 304 stainless steel are essentially better, as
0 Application temperatures, page 49 is found in diagrams 06 and 07. Testing methods, page 57
20 50 80 120 150 200 Additional securing, page 49
Temperature [°C]
Shaft materials, page 52 Diameter Shaft iglidur® H2 Housing
Diagram 02: Permissible maximum surface pressure of
as a function of temperature (110 MPa at +20 °C) Friction and wear d1 [mm] h9 [mm] F10 [mm] H7 [mm]
The coefficients of friction of iglidur® H2 plain bearings chan- iglidur® H2 Dry Greases Oil Water up to 3 0–0.025 +0.006 +0.046 0 +0.010
Diagram 03 shows the elastic deformation of iglidur® H2 at ge with different surface speeds, loads and roughness, as C. o. f. µ 0.07–0.30 0.09 0.04 0.04 > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
radial loads. At the maximum recommended surface pressure indicated in the diagrams 04 and 05. Table 04: Coefficient of friction against steel (Ra = 1µm, > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
of 110 MPa at room temperature the deformation is less than 50 HRC) > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
3 %. The values for tensile and compressive strength are Coefficients of friction and surfaces, page 47 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
higher than those of iglidur® H at room temperature. Wear resistance, page 50 > 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
> 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
Surface pressure, page 41
Table 05: Important tolerances for plain bearings
6 0.4 25.0 according to ISO 3547-1 after pressfit
5
20.0
+23 °C +60 °C
4 0.3
Product range
HR carbon steel
H.a. aluminium
Deformation [%]
2 0.2
alternative to iglidur® H and iglidur® H4 bearings in high
304 SS
1 5.0
Cf53
volume applications.
0 0.1 0.0
0 10 20 30 40 50 60 70 80 90 100 110 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
332 Online tools and more information www.igus.eu/h2 3D-CAD files, prices and delivery time online www.igus.eu/h2 333
iglidur plain bearing materials
®
Coefficient of friction
Temperature [°C] 123)
Price index
they are not lubricated and the highest hygiene Detailed information about delivery time online.
[MPa] 124)
is required. Where is this more true than in food
[µ] 125)
handling and processing? Block pricing online
This group comprises FDA-compliant materials for No minimum order value. From batch size 1. 0.45
the most varied operating conditions in terms of iglidur® A200 – The "food-classic" for low speeds
moisture and temperature, including iglidur® T220, Ø 1–50 mm FDA-compliant
1.62
a material suitable even for the tobacco industry. More dimensions upon request Page 371 80
18
●● Lubrication and maintenance-free
●● Lightweight Imperial dimensions available
●● Good price / performance ratio From page 1391 iglidur® A160 – "Food" bearing with high media
●● Predictable service life resistance up to +90 °C
Online product finder FDA- and EC10/2011 compliant
90 0.33
www.igus.eu/iglidur-finder Page 382 15 0.09
Coefficient of friction
0.33 4.78
Price index
Page 389
[MPa] 124)
[µ] 125)
iglidur® UW160 – For contact with drinking water
KTW-compliant
iglidur® A181 – The universal bearing for food contact 0.17 2.00
Page 397 90
FDA- and EC10/2011 compliant 15
0.18
Page 339 90 31 0.48
Page 347
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
120
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
iglidur® A500 – The media and temperature specialist
0.36 4.10
in the food sector
250
FDA- and EC10/2011 compliant
Page 355
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
336 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 337
The universal bearing for contact with
food – iglidur A181 ®
338
A181
iglidur®
A181 iglidur A181 | The universal bearing for contact with food
®
iglidur A181 | Technical data
® +90 °C
31 MPa
FDA- and EC10/2011 compliant
Material properties
Compliant with The iglidur® A181 material is food compliant General properties Unit iglidur® A181 Testing method
EC directive with directive 10/2011 EC and also to FDA Density g/cm3 1.38
10/2011 EC specifications. The blue colour also facilitates the Colour blue
often required "optical detectability" in the food Max. moisture absorption at +23 °C/50 % r.h. % weight 0.2 DIN 53495
industry. Max. water absorption % weight 1.3
Coefficient of sliding friction, dynamic, against steel µ 0.10–0.21
pv value, max. (dry) MPa · m/s 0.31
Complies with Mechanical properties
FDA regulations When to use it? Flexural modulus MPa 1,913 DIN 53457
●● When FDA-compliance is required Flexural strength at +20 °C MPa 48 DIN 53452
●● When a material compliant with the 10/2011 Compressive strength MPa 60
EC is required Max. recommended surface pressure (+20 °C) MPa 31
●● When an universal material suitable for direct Shore-D hardness 76 DIN 53505
contact with food is required Physical and thermal properties
Universal installation Max. long-term application temperature °C +90
Max. short-term application temperature °C +110
Min. long-term application temperature °C –50
Good media When not to use it? Heat conductivity W/m · K 0.25 ASTM C 177
resistance ●● When FDA and 10/2011 EC directive Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
11 DIN 53752
compliance are not required Electrical properties
iglidur® J, page 141 Specific contact resistance Ωcm > 1012 DIN IEC 93
●● When temperatures are continuously greater Surface resistance Ω > 10 12
DIN 53482
Lubrication and than +90 °C Table 01: Material properties table
maintenance-free iglidur® A350, page 347
100.0
●● When a cost-effective universal bearing is Radiation resistance
required Plain bearings made from iglidur® A181 are resistant up to
iglidur® G, page 79 10.0 a radiation intensity of 2 · 102 Gy.
iglidur® P, page 113
Available from stock UV resistance
Detailed information about delivery time online. Typical application areas 1.0 iglidur® A181 bearings are only conditionally resistant to
Load [MPa]
●● Food industry UV radiation.
Block pricing online ●● Beverage technology
0.1
No minimum order value. From batch size 1. ●● Medical technology 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Max. +90 °C Diagram 01: Permissible pv values for iglidur® A181 Hydrocarbons +
Min. –50 °C bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Ø 4–50 mm Diluted acids 0 to –
More dimensions upon request Moisture absorption Strong acids –
The moisture absorption of iglidur® A181 plain bearings is Diluted alkalines +
Imperial dimensions available approximately 0.2 % weight in standard climatic conditions. Strong alkalines + to 0
From page 1391 The saturation limit submerged in water is 1.3 % weight. This
+ resistant 0 conditionally resistant – not resistant
must be taken into account for these types of applications.
All data given at room temperature [+20 °C]
Online product finder
Diagram, www.igus.eu/a181-moisture Table 02: Chemical resistance
www.igus.eu/iglidur-finder
Vacuum Chemical table, page 1478
When used in a vacuum environment, the iglidur® A181 plain
iglidur® A181 material complies with EC Directive 10/2011 EC and also with FDA
bearings release moisture as a vapour. Use in a vacuum
(Food and Drug Administration) specifications for repeated contact with food.
environment is only possible with dehumidified bearings.
340 Online tools and more information www.igus.eu/a181 3D-CAD files, prices and delivery time online www.igus.eu/a181 341
A181 A181
+90 °C iglidur A181 | Technical data
®
iglidur A181 | Technical data ® +90 °C
31 MPa 31 MPa
0.26 120
Due to their technical properties and their conformity Permissible surface speeds rotating
0.23 100
with the relevant regulations, iglidur® A181 bearings are iglidur® A181 was developed for low surface speeds.
0.20 oszillierend
predestined for applications in food technology. Compared Maximum speeds up to 0.8 m/s (rotating) and 3.5 m/s
Wear [µm/km]
suitable with respect to the wear resistance in most cases. limits at which an increase up to the continuous permissible 40
0.11
temperature occurs. This increase is a result of friction. In 20
0.08
Mechanical properties practice, though, this temperature level is rarely reached,
0.05 0
With increasing temperatures, the compressive strength due to varying application conditions. 0 5 10 15 20 25 30 0 5 10 15 20 25 30
of iglidur® A181 plain bearings decreases. The permissible Load [MPa] Load [MPa]
Surface speed, page 44
maximum surface pressure is a mechanical material Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
pv value and lubrication, page 86
parameter. No conc lusions regarding the tribological pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
properties can be drawn from this. m/s Rotating Oscillating Linear steel, as a function of the pressure
Continuous 0.8 0.6 3.5
40 Short-term 1.2 1.0 5.0
35 Shaft materials Installation tolerances
Table 03: Maximum surface speeds
30 Diagram 06 shows results of testing different shaft materials iglidur® A181 plain bearings are standard bearings for
25 with plain bearings made from iglidur® A181. Particular shafts with h-tolerance (recommended minimum h9). The
Temperatures
20 attention is paid in the food industry to the corrosion- bearings are designed for pressfit into a housing machined
The long-term upper temperature limit of +90 °C permits
15 resistant shaft types. Diagram 06 shows that very low wear to a H7 tolerance. After being assembled into a nominal size
the broad use in applications with direct contact with food.
Load [MPa]
10 rates can be achieved in combination with these shafts. housing, in standard cases the inner diameter automatically
As shown in diagram 02, with increasing temperatures,
5 As with many of the iglidur® materials, wear rate increases adjusts to the E10 tolerances.
the compressive strength decreases. When considering
0 with otherwise identical parameters in rotation (Diagram 07).
20 30 40 50 60 70 80 90 temperatures, the additional frictional heat in the bearing
Testing methods, page 57
Temperature [°C] system must be taken into account. At temperatures over
Shaft materials, page 52
Diagram 02: Permissible maximum surface pressure of +60 °C an additional securing is required.
as a function of temperature (31 MPa at +20 °C) Diameter Shaft iglidur® A181 Housing
Application temperatures, page 49 iglidur A181 ®
Dry Greases Oil Water d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Additional securing, page 49 C. o. f. µ 0.10–0.21 0.08 0.03 0.04 up to 3 0–0.025 +0.014 +0.054 0 +0.010
Diagram 03 shows the elastic deformation of iglidur® A181 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Table 04: Coefficient of friction against steel (Ra = 1µm,
during radial loading. Friction and wear > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
50 HRC)
Coefficient of friction and wear resistance alter with the appli- > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
Surface pressure, page 41 cation parameters (diagrams 04 and 05). For iglidur® A181 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
bearings, the alteration of the coefficient of friction μ depends > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
on surface speed and the shaft surface finish. > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Coefficients of friction and surfaces, page 47 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
Wear resistance, page 50 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
10 0.4 3.0 Table 05: Important tolerances for plain bearings
9 according to ISO 3547-1 after pressfit
8 +23 °C +60 °C 2.5
0.3
7
2.0
HR carbon steel
H.a. aluminium
Deformation [%]
4
Wear [µm/km]
3 1.0
0.1
304 SS
2
0.5
Cf53
1
0 0.0 0.0
0 5 10 15 20 25 30 35 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1.0 MPa
342 Online tools and more information www.igus.eu/a181 3D-CAD files, prices and delivery time online www.igus.eu/a181 343
A181SM iglidur® A181 | Product range iglidur® A181 | Product range A181SM
30°
h13 h13
Type Dimensions [mm]
+0.040 40.0 44.0 40.0 A181SM-4044-40
30.0 34.0 40.0 A181SM-3034-40
+0.124 40.0 44.0 50.0 A181SM-4044-50
d1
d2
0.5 A181SM-3236-20 A181SM-4550-20
32.0 36.0 20.0 45.0 50.0 20.0
32.0 36.0 30.0 A181SM-3236-30 45.0 50.0 30.0 A181SM-4550-30
30°
iglidur® material
32.0 36.0 40.0 A181SM-3236-40 45.0 50.0 40.0 A181SM-4550-40
b1 +0.050
35.0 39.0 20.0 A181SM-3539-20 45.0 50.0 50.0 A181SM-4550-50
Outer-Ø d2
Inner-Ø d1
+0.050 +0.150
Length b1
35.0 39.0 30.0 A181SM-3539-30 50.0 55.0 20.0 A181SM-5055-20
+0.150
Form S
Metric
35.0 39.0 40.0 A181SM-3539-40 50.0 55.0 30.0 A181SM-5055-30
2)
Thickness < 1 mm: chamfer = 20° 35.0 39.0 50.0 A181SM-3539-50 50.0 55.0 40.0 A181SM-5055-40
40.0 44.0 20.0 A181SM-4044-20 50.0 55.0 50.0 A181SM-5055-50
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 40.0 44.0 30.0 A181SM-4044-30 50.0 55.0 60.0 A181SM-5055-60
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 3)
After press-fit. Testing methods Page 57
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
From page 1398
Dimensions [mm]
d1 d1-Tolerance3) d2 b1 Part No. d1 d1-Tolerance3) d2 b1 Part No.
h13 h13
4.0 5.5 4.0 A181SM-0405-04 16.0 18.0 20.0 A181SM-1618-20
4.0 5.5 6.0 A181SM-0405-06 16.0 18.0 25.0 A181SM-1618-25
+0.032
5.0 7.0 5.0 A181SM-0507-05 18.0 20.0 15.0 A181SM-1820-15
+0.020 +0.102
5.0 7.0 10.0 A181SM-0507-10 18.0 20.0 20.0 A181SM-1820-20
+0.068
6.0 8.0 6.0 A181SM-0608-06 18.0 20.0 25.0 A181SM-1820-25
6.0 8.0 8.0 A181SM-0608-08 20.0 23.0 10.0 A181SM-2023-10
6.0 8.0 10.0 A181SM-0608-10 20.0 23.0 15.0 A181SM-2023-15
8.0 10.0 8.0 A181SM-0810-08 20.0 23.0 20.0 A181SM-2023-20
8.0 10.0 10.0 A181SM-0810-10 20.0 23.0 25.0 A181SM-2023-25
8.0 10.0 12.0 A181SM-0810-12 20.0 23.0 30.0 A181SM-2023-30
10.0 12.0 8.0 A181SM-1012-08 22.0 25.0 15.0 A181SM-2225-15
+0.025
10.0 12.0 10.0 A181SM-1012-10 22.0 25.0 20.0 A181SM-2225-20
+0.083
10.0 12.0 12.0 A181SM-1012-12 22.0 25.0 25.0 A181SM-2225-25
10.0 12.0 15.0 A181SM-1012-15 22.0 25.0 30.0 A181SM-2225-30
10.0 12.0 10.0 A181SM-1012-10 24.0 27.0 15.0 A181SM-2427-15
10.0 12.0 20.0 A181SM-1012-20 24.0 27.0 20.0 A181SM-2427-20
+0.040
12.0 14.0 12.0 A181SM-1214-12 24.0 27.0 25.0 A181SM-2427-25
+0.124
12.0 14.0 15.0 A181SM-1214-15 24.0 27.0 30.0 A181SM-2427-30
12.0 14.0 20.0 A181SM-1214-20 25.0 28.0 15.0 A181SM-2528-15
13.0 15.0 10.0 A181SM-1315-10 25.0 28.0 20.0 A181SM-2528-20
13.0 15.0 20.0 A181SM-1315-20 25.0 28.0 25.0 A181SM-2528-25
14.0 +0.032 16.0 15.0 A181SM-1416-15 25.0 28.0 30.0 A181SM-2528-30
14.0 +0.102 16.0 20.0 A181SM-1416-20 28.0 32.0 20.0 A181SM-2832-20 Couldn't find your size?
14.0 16.0 25.0 A181SM-1416-25 28.0 32.0 25.0 A181SM-2832-25 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
15.0 17.0 15.0 A181SM-1517-15 28.0 32.0 30.0 A181SM-2832-30 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
15.0 17.0 20.0 A181SM-1517-20 30.0 34.0 20.0 A181SM-3034-20
15.0 17.0 25.0 A181SM-1517-25 30.0 34.0 25.0 A181SM-3034-25 Even more dimensions from stock
16.0 18.0 15.0 A181SM-1618-15 30.0 34.0 30.0 A181SM-3034-30 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
344 Online tools and more information www.igus.eu/a181 3D-CAD files, prices and delivery time online www.igus.eu/a181 345
A181FM iglidur® A181 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance 3) d13 h13 –0.14
6.0 8.0 12.0 4.0 1.0 A181FM-0608-04 15.0 17.0 23.0 17.0 1.0 A181FM-1517-17
+0.020
6.0 8.0 12.0 6.0 1.0 A181FM-0608-06 16.0 18.0 24.0 12.0 1.0 A181FM-1618-12
+0.068
6.0 8.0 12.0 8.0 1.0 A181FM-0608-06 16.0 +0.032 18.0 24.0 17.0 1.0 A181FM-1618-17
8.0 10.0 15.0 5.5 1.0 A181FM-0810-05 18.0 +0.102 20.0 26.0 12.0 1.0 A181FM-1820-12
8.0 10.0 15.0 7.5 1.0 A181FM-0810-07 18.0 20.0 26.0 17.0 1.0 A181FM-1820-17
8.0 10.0 15.0 9.5 1.0 A181FM-0810-09 18.0 20.0 26.0 22.0 1.0 A181FM-1820-22
8.0 10.0 15.0 10.0 1.0 A181FM-0810-10 20.0 23.0 30.0 11.5 1.5 A181FM-2023-11
+0.025
12.0 14.0 20.0 7.0 1.0 A181FM-1214-07 30.0 34.0 42.0 16.0 2.0 A181FM-3034-16
12.0 14.0 20.0 9.0 1.0 A181FM-1214-09 30.0
+0.124
34.0 42.0 26.0 2.0 A181FM-3034-26 Compliant with EC directive 10/2011 EC
12.0 14.0 20.0 12.0 1.0 A181FM-1214-12 35.0 39.0 47.0 16.0 2.0 A181FM-3539-16
12.0 +0.032 14.0 20.0 17.0 1.0 A181FM-1214-17 35.0 39.0 47.0 26.0 2.0 A181FM-3539-26 FDA-compliant
14.0 +0.102 16.0 22.0 12.0 1.0 A181FM-1416-12 40.0 44.0 52.0 30.0 2.0 A181FM-4044-30
14.0 16.0 22.0 17.0 1.0 A181FM-1416-17 40.0 44.0 52.0 40.0 2.0 A181FM-4044-40 For use with temperatures up to +180 °C
15.0 17.0 23.0 9.0 1.0 A181FM-1517-09 45.0 50.0 58.0 50.0 2.0 A181FM-4550-50
15.0 17.0 23.0 12.0 1.0 A181FM-1517-12 For medium and high loads
3)
After press-fit. Testing methods Page 57
Equally good for both oscillating and rotating
applications
Load [MPa]
iglidur® A180, page 363
●● For high speeds
Block pricing online Medium Resistance
iglidur® J, page 141 0.1
No minimum order value. From batch size 1. 0.001 0.01 0.1 1.0 10.0 Alcohol +
Surface speed [m/s] Hydrocarbons + to 0
Typical application areas
Max. +180 °C Diagram 01: Permissible pv values for iglidur® A350 Greases, oils without additives +
●● Food industry
Min. –100 °C bearings with a wall thickness of 1 mm dry running against Fuels +
●● Beverage technology
a steel shaft, at +20 °C, mounted in a steel housing Diluted acids +
●● Medical technology
Ø 4–50 mm Strong acids +
More dimensions upon request Moisture absorption Diluted alkalines +
The humidity absorption of iglidur® A350 is low and can Strong alkalines +
Imperial dimensions available be ignored when using standard-bearings. Even when
+ resistant 0 conditionally resistant – not resistant
From page 1391 saturated with water, iglidur® A350 does not absorb more
All data given at room temperature [+20 °C]
than 1.9 % weight of water.
Table 02: Chemical resistance
Online product finder
Diagram, www.igus.eu/a350-moisture
www.igus.eu/iglidur-finder
Chemical table, page 1478
Vacuum
iglidur® A350 material complies with EC Directive 10/2011 EC and also with FDA When used in a vacuum, the iglidur® A350 plain bearings
(Food and Drug Administration) specifications for repeated contact with food. release moisture as a vapour. Only dehumidified bearings
are suitable in vacuum.
348 Online tools and more information www.igus.eu/a350 3D-CAD files, prices and delivery time online www.igus.eu/a350 349
A350 A350
+180 °C iglidur A350 | Technical data
®
iglidur A350 | Technical data ® +180 °C
60 MPa 60 MPa
0.19 25
iglidur® A350 bearings are made for practically all loads in Permissible surface speeds
0.17
food and packaging machinery. Even high loads, often seen iglidur® A350 bearings are suitable for low and medium 20
in lifting equipment, are taken easily and the bearings work speeds in rotating and oscillating use. Even linear 0.15
Wear [µm/km]
Mechanical properties be interesting alternatives because the wear rate of these 0.09
With increasing temperatures, the compressive strength materials is better. 5
0.07
of iglidur® A350 plain bearings decreases. The diagram
0.05 0
02 shows this inverse relationship. The recommended Surface speed, page 44 0 5 10 15 20 25 30 35 40 45 50 55 60 1.0 2.0 3.0 4.0 5.0
maximum surface pressure is a mechanical material Load [MPa] Load [MPa]
parameter. No conclusions regarding the tribological m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Cf53 2 SS High grade steel
properties can be drawn from this. Continuous 1 0.8 2.5 pressure, v = 0.01 m/s Diagram 07: Wear, rotating with different shaft materials,
Short-term 1.2 0.9 3 as a function of the pressure
80 Table 03: Maximum surface speeds
20 over +140 °C an additional securing is required. The wear- materials. It has been shown that there is no clear favourite to a H7 tolerance. After being assembled into a nominal size
rate of iglidur® A350 bearings rises only little with higher and 304 stainless steel, high grade steel and hard chrome housing, in standard cases the inner diameter automatically
0 temperatures. Tests have shown good wear results at plated steel are all suitable. Hard-anodised aluminium is adjusts to the F10 tolerances. For particular dimensions the
20 40 60 80 100 120 140 160 180 +100 °C on all tested shaft materials. also well suited for both linear and rotating movements. tolerance differs depending on the wall thickness (please
Temperature [°C]
see product range table).
Diagram 02: Permissible maximum surface pressure of
Application temperatures, page 49 Shaft materials, page 52
as a function of temperature (60 MPa at +20 °C)
Additional securing, page 49 Testing methods, page 57
iglidur® A350 Dry Greases Oil Water
Diagram 03 shows the elastic deformation of iglidur A350 ®
C. o. f. µ 0.1–0.2 0.09 0.04 0.04 Diameter Shaft iglidur® A350 Housing
under different loads. At the recommended maximum Friction and wear d1 [mm] h9 [mm] F10 [mm] H7 [mm]
Table 04: Coefficient of friction against steel (Ra = 1µm,
surface pressure of 60 MPa the deformation at room The coefficient of friction of iglidur® A350 on a steel shaft up to 3 0–0.025 +0.006 +0.046 0 +0.010
50 HRC)
temperature is less than 5 %. are in the mid range (diagrams 04 and 05). > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
> 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
Surface pressure, page 41 Coefficients of friction and surfaces, page 47 > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Wear resistance, page 50 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
> 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
6 0.4 4.5 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
4.0
5 Table 05: Important tolerances for plain bearings
0.3 3.5
+23 °C +60 °C according to ISO 3547-1 after pressfit
4 3.0
HR carbon steel
H.a. aluminium
2.0
Deformation [%]
Wear [µm/km]
2 1.5
0.1 1.0
304 SS
1
Cf53
0.5
0 0.0 0.0
0 10 20 30 40 50 60 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1 MPa
350 Online tools and more information www.igus.eu/a350 3D-CAD files, prices and delivery time online www.igus.eu/a350 351
A350SM iglidur® A350 | Product range iglidur® A350 | Product range A350SM
30°
h13 h13
Type Dimensions [mm]
30.0 +0.020 34.0 30.0 A350SM-3034-30 40.0 44.0 40.0 A350SM-4044-40
30.0 +0.104 34.0 40.0 A350SM-3034-40 40.0 44.0 50.0 A350SM-4044-50
d1
d2
0.5 A350SM-3236-20 A350SM-4550-20
32.0 36.0 20.0 45.0 50.0 20.0
32.0 36.0 30.0 A350SM-3236-30 45.0 50.0 30.0 A350SM-4550-30
30°
iglidur® material
32.0 36.0 40.0 A350SM-3236-40 45.0 50.0 40.0 A350SM-4550-40
b1 +0.025
35.0 39.0 20.0 A350SM-3539-20 45.0 50.0 50.0 A350SM-4550-50
Outer-Ø d2
Inner-Ø d1
+0.025 +0.125
Length b1
35.0 39.0 30.0 A350SM-3539-30 50.0 55.0 20.0 A350SM-5055-20
+0.125
Form S
Metric
35.0 39.0 40.0 A350SM-3539-40 50.0 55.0 30.0 A350SM-5055-30
2)
Thickness < 1 mm: chamfer = 20° 35.0 39.0 50.0 A350SM-3539-50 50.0 55.0 40.0 A350SM-5055-40
40.0 44.0 20.0 A350SM-4044-20 50.0 55.0 50.0 A350SM-5055-50
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 40.0 44.0 30.0 A350SM-4044-30 50.0 55.0 60.0 A350SM-5055-60
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 3)
After press-fit. Testing methods Page 57
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
From page 1400
Dimensions [mm]
d1 d1-Tolerance3) d2 b1 Part No. d1 d1-Tolerance3) d2 b1 Part No.
h13 h13
4.0 5.5 4.0 A350SM-0405-04 16.0 18.0 20.0 A350SM-1618-20
4.0 5.5 6.0 A350SM-0405-06 16.0 18.0 25.0 A350SM-1618-25
+0.016
5.0 7.0 5.0 A350SM-0507-05 18.0 20.0 15.0 A350SM-1820-15
+0.010 +0.068
5.0 7.0 10.0 A350SM-0507-10 18.0 20.0 20.0 A350SM-1820-20
+0.058
6.0 8.0 6.0 A350SM-0608-06 18.0 20.0 25.0 A350SM-1820-25
6.0 8.0 8.0 A350SM-0608-08 20.0 23.0 10.0 A350SM-2023-10
6.0 8.0 10.0 A350SM-0608-10 20.0 23.0 15.0 A350SM-2023-15
8.0 10.0 8.0 A350SM-0810-08 20.0 23.0 20.0 A350SM-2023-20
8.0 10.0 10.0 A350SM-0810-10 20.0 23.0 25.0 A350SM-2023-25
8.0 10.0 12.0 A350SM-0810-12 20.0 23.0 30.0 A350SM-2023-30
10.0 +0.013 12.0 8.0 A350SM-1012-08 22.0 25.0 15.0 A350SM-2225-15
10.0 +0.071 12.0 10.0 A350SM-1012-10 22.0 25.0 20.0 A350SM-2225-20
10.0 12.0 12.0 A350SM-1012-12 22.0 25.0 25.0 A350SM-2225-25
10.0 12.0 15.0 A350SM-1012-15 22.0 25.0 30.0 A350SM-2225-30
10.0 12.0 20.0 A350SM-1012-20 24.0 27.0 15.0 A350SM-2427-15
12.0 14.0 10.0 A350SM-1214-10 24.0 27.0 20.0 A350SM-2427-20
+0.020
12.0 14.0 12.0 A350SM-1214-12 24.0 27.0 25.0 A350SM-2427-25
+0.104
12.0 14.0 15.0 A350SM-1214-15 24.0 27.0 30.0 A350SM-2427-30
12.0 14.0 20.0 A350SM-1214-20 24.0 28.0 30.0 A350SM-2428-30
13.0 15.0 10.0 A350SM-1315-10 25.0 28.0 15.0 A350SM-2528-15
13.0 15.0 20.0 A350SM-1315-20 25.0 28.0 20.0 A350SM-2528-20
+0.016
14.0 16.0 15.0 A350SM-1416-15 25.0 28.0 25.0 A350SM-2528-25
+0.068 Couldn't find your size?
14.0 16.0 20.0 A350SM-1416-20 25.0 28.0 30.0 A350SM-2528-30
14.0 16.0 25.0 A350SM-1416-25 28.0 32.0 20.0 A350SM-2832-20 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
15.0 17.0 15.0 A350SM-1517-15 28.0 32.0 25.0 A350SM-2832-25 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
15.0 17.0 20.0 A350SM-1517-20 28.0 32.0 30.0 A350SM-2832-30
15.0 17.0 25.0 A350SM-1517-25 30.0 34.0 20.0 A350SM-3034-20 Even more dimensions from stock
16.0 18.0 15.0 A350SM-1618-15 30.0 34.0 25.0 A350SM-3034-25 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
352 Online tools and more information www.igus.eu/a350 3D-CAD files, prices and delivery time online www.igus.eu/a350 353
A350FM iglidur® A350 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
Load [MPa]
Detailed information about delivery time online. 1.0
to UV radiation.
Typical application areas
Block pricing online 0.1
●● Food industry 0.001 0.01 0.1 1.0 10.0 Medium Resistance
No minimum order value. From batch size 1.
●● Beverage technology Surface speed [m/s] Alcohol +
●● Medical technology Diagram 01: Permissible pv values for iglidur® A500 Hydrocarbons +
Max. +250 °C
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Min. –100 °C
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Ø 4–50 mm Diluted acids +
More dimensions upon request Strong acids +
Moisture absorption Diluted alkalines +
Imperial dimensions available The moisture absorption of iglidur® A500 plain bearings is Strong alkalines +
From page 1391 only 0.5 % weight when saturated. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Online product finder Diagram, www.igus.eu/a500-moisture Table 02: Chemical resistance
www.igus.eu/iglidur-finder
Vacuum Chemical table, page 1478
iglidur A500 material complies with EC Directive 10/2011 EC and also with FDA
®
In a vacuum, iglidur® A500 plain bearings can only be used
(Food and Drug Administration) specifications for repeated contact with food. to a limited degree.
356 Online tools and more information www.igus.eu/a500 3D-CAD files, prices and delivery time online www.igus.eu/a500 357
A500 A500
+250 °C iglidur A500 | Technical data
®
iglidur A500 | Technical data ® +250 °C
120 MPa 120 MPa
0.7 200
Bearings made from iglidur® A500 can be used at high tem- Permissible surface speeds 180
0.6
peratures and are permitted for use in direct contact with iglidur® A500 also permits high surface speeds due to the 160 rotating
0.5 oscillating
foodstuffs (FDA-compliant). They exhibit an exceptionally high temperature resistance. The coefficient of friction rises 140
Wear [µm/km]
is an extremely soft material, it simultaneously possesses an from iglidur® A500 have a better wear resistance and higher 0.2 60
excellent compressive strength even at high temperatures. permitted pv values in pivoting applications. 40
0.1
20
Mechanical properties 0.0 0
Surface speed, page 44 0 10 20 30 40 50 60 70 0 10 20 30 40 50
With increasing temperatures, the compressive strength
Load [MPa] Load [MPa]
of iglidur® A500 plain bearings decreases. The diagram 02
m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
shows this inverse relationship. The recommended maxi-
Continuous 0.6 0.4 1 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
mum surface pressure is a mechanical material parameter.
Short-term 1 0.7 2 steel, as a function of the pressure
No conclusions regarding the tribological properties can be
drawn from this. Table 03: Maximum surface speeds
Shaft materials Installation tolerances
160
Diagram 06 displays a summary of the results of tests with iglidur® A500 plain bearings are standard bearings for
140 Temperatures
different shaft materials conducted with bearings made shafts with h-tolerance (recommended minimum h9). The
120 The short-term permitted maximum application temperature
from iglidur® A500. The combination "iglidur® A500/hard- bearings are designed for pressfit into a housing machined
100 is +300 °C. With increasing temperatures, the compressive
chromed shaft" clearly stands out in rotating application. to a H7 tolerance. After being assembled into a nominal size
80 strength of iglidur ® J500 plain bearings decreases.
Up to about 2.0 MPa, the wear of this combination remains housing, in standard cases the inner diameter automatically
60 The diagram 02 shows this inverse relationship. The
largely independent of load. In pivoting applications with adjusts to the F10 tolerances. For particular dimensions the
Load [MPa]
+23 °C
HR carbon steel
H.a. aluminium
5 12
Wear [µm/km]
Deformation [%]
9
0.2
304 SS
6
Cf53
3
0.1 0
0 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
0 40 80 120 Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
Load [MPa] Diagram 04: Coefficient of friction as a function of the
Diagram 03: Deformation under pressure and temperature surface speed, p = 0.75 MPa
358 Online tools and more information www.igus.eu/a500 3D-CAD files, prices and delivery time online www.igus.eu/a500 359
A500SM iglidur® A500 | Product range iglidur® A500 | Product range A500SM
30°
h13 h13
Type Dimensions [mm]
30.0 34.0 20.0 A500SM-3034-20 40.0 44.0 30.0 A500SM-4044-30
30.0 +0.020 34.0 25.0 A500SM-3034-25 40.0 44.0 40.0 A500SM-4044-40
d1
d2
0.5 A500SM-3034-30 A500SM-4044-50
30.0 +0.104 34.0 30.0 40.0 44.0 50.0
30.0 34.0 40.0 A500SM-3034-40 45.0 50.0 20.0 A500SM-4550-20
30°
iglidur® material
32.0 36.0 20.0 A500SM-3236-20 45.0 50.0 30.0 A500SM-4550-30
b1
32.0 36.0 30.0 A500SM-3236-30 45.0 +0.025 50.0 40.0 A500SM-4550-40
Outer-Ø d2
Inner-Ø d1
Length b1
32.0 36.0 40.0 A500SM-3236-40 45.0 +0.125 50.0 50.0 A500SM-4550-50
Form S
Metric
35.0 +0.025 39.0 20.0 A500SM-3539-20 50.0 55.0 20.0 A500SM-5055-20
2)
Thickness < 1 mm: chamfer = 20° 35.0 +0.125 39.0 30.0 A500SM-3539-30 50.0 55.0 30.0 A500SM-5055-30
35.0 39.0 40.0 A500SM-3539-40 50.0 55.0 40.0 A500SM-5055-40
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 35.0 39.0 50.0 A500SM-3539-50 50.0 55.0 50.0 A500SM-5055-50
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 40.0 44.0 20.0 A500SM-4044-20 50.0 55.0 60.0 A500SM-5055-60
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available 3)
After press-fit. Testing methods Page 57
From page 1401
Dimensions [mm]
d1 d1-Tolerance3) d2 b1 Part No. d1 d1-Tolerance3) d2 b1 Part No.
h13 h13
4.0 5.5 4.0 A500SM-0405-04 15.0 17.0 20.0 A500SM-1517-20
4.0 5.5 6.0 A500SM-0405-06 15.0 17.0 25.0 A500SM-1517-25
5.0 7.0 5.0 A500SM-0507-05 16.0 18.0 15.0 A500SM-1618-15
+0.010
5.0 7.0 10.0 A500SM-0507-10 16.0 +0.016 18.0 20.0 A500SM-1618-20
+0.058
6.0 8.0 6.0 A500SM-0608-06 16.0 +0.086 18.0 25.0 A500SM-1618-25
6.0 8.0 8.0 A500SM-0608-08 18.0 20.0 15.0 A500SM-1820-15
6.0 8.0 10.0 A500SM-0608-10 18.0 20.0 20.0 A500SM-1820-20
8.0 10.0 6.0 A500SM-0810-06 18.0 20.0 25.0 A500SM-1820-25
8.0 10.0 8.0 A500SM-0810-08 20.0 23.0 10.0 A500SM-2023-10
8.0 10.0 10.0 A500SM-0810-10 20.0 23.0 15.0 A500SM-2023-15
8.0 10.0 12.0 A500SM-0810-12 20.0 23.0 20.0 A500SM-2023-20
+0.013
10.0 12.0 8.0 A500SM-1012-08 20.0 23.0 25.0 A500SM-2023-25
+0.071
10.0 12.0 10.0 A500SM-1012-10 20.0 23.0 30.0 A500SM-2023-30
10.0 12.0 12.0 A500SM-1012-12 22.0 25.0 15.0 A500SM-2225-15
10.0 12.0 15.0 A500SM-1012-15 22.0 25.0 20.0 A500SM-2225-20
10.0 12.0 20.0 A500SM-1012-20 22.0 25.0 25.0 A500SM-2225-25
12.0 14.0 10.0 A500SM-1214-10 22.0 25.0 30.0 A500SM-2225-30
12.0 14.0 12.0 A500SM-1214-12 24.0 +0.020 27.0 15.0 A500SM-2427-15
12.0 14.0 15.0 A500SM-1214-15 24.0 +0.104 27.0 20.0 A500SM-2427-20
12.0 14.0 20.0 A500SM-1214-20 24.0 27.0 25.0 A500SM-2427-25
12.0 15.0 15.0 A500SM-1215-15 24.0 27.0 30.0 A500SM-2427-30
13.0 +0.016 15.0 10.0 A500SM-1315-10 25.0 28.0 15.0 A500SM-2528-15
13.0 +0.086 15.0 20.0 A500SM-1315-20 25.0 28.0 20.0 A500SM-2528-20 Couldn't find your size?
14.0 16.0 15.0 A500SM-1416-15 25.0 28.0 25.0 A500SM-2528-25 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
14.0 16.0 16.0 A500SM-1416-16 25.0 28.0 30.0 A500SM-2528-30 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
14.0 16.0 20.0 A500SM-1416-20 28.0 32.0 20.0 A500SM-2832-20
14.0 16.0 25.0 A500SM-1416-25 28.0 32.0 25.0 A500SM-2832-25 Even more dimensions from stock
15.0 17.0 15.0 A500SM-1517-15 28.0 32.0 30.0 A500SM-2832-30 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
360 Online tools and more information www.igus.eu/a500 3D-CAD files, prices and delivery time online www.igus.eu/a500 361
A500FM iglidur® A500 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
iglidur® material
b2
Outer-Ø d2
Inner-Ø d1
Length b1
b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
Load [MPa]
●● Beverage technology
tribological properties deteriorate with continuous exposure.
●● Medical technology
Available from stock 0.1
Detailed information about delivery time online. 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® A180 Hydrocarbons +
Block pricing online
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
No minimum order value. From batch size 1.
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Max. +90 °C Diluted acids 0 to –
Min. –50 °C Moisture absorption Strong acids –
The moisture absorption of iglidur® A180 plain bearings is Diluted alkalines +
Ø 6–30 mm approximately 0.2 % weight in standard climatic conditions. Strong alkalines + to 0
More dimensions upon request The saturation limit submerged in water is 1.3 % weight. This + resistant 0 conditionally resistant – not resistant
must be taken into account for these types of applications. All data given at room temperature [+20 °C]
Online product finder Table 02: Chemical resistance
Diagram, www.igus.eu/a180-moisture
www.igus.eu/iglidur-finder
Vacuum Chemical table, page 1478
When used in vacuum, the iglidur® A180 plain bearings
iglidur® A180 material complies with the requirements of the FDA (Food and Drug
release moisture as a vapour. Only dehumidified bearings
Administration) specifications for repeated contact with food.
are suitable in vacuum.
364 Online tools and more information www.igus.eu/a180 3D-CAD files, prices and delivery time online www.igus.eu/a180 365
A180 A180
+90 °C iglidur A180 | Technical data
®
iglidur A180 | Technical data ® +90 °C
28 MPa 28 MPa
10 0.6 3.5
Bearings made from iglidur ® A180 are suitable for
0.5 3.0
application in direct contact with foodstuffs. Hence they are 8
the ideal solution for bearing positions on machines for the 2.5
HR carbon steel
H.a. aluminium
manufacturing, for small equipment for households, etc.
Deformation [%]
4 1.5
Wear [µm/km]
The iglidur® A180 distinguishes itself also in wet cleaning 0.2
1.0
304 SS
or where process-dependent contact with wet media 2 0.1 0.5
Cf53
is the business of the day by its extremely low humidity
0 0.0 0.0
absorption. 0 5 10 15 20 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
Mechanical properties Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
With increasing temperatures, the compressive strength surface speed, p = 0.75 MPa
of iglidur® A180 plain bearings decreases. The diagram
02 shows this inverse relationship. The recommended 0.3 20
rotating
maximum surface pressure is a mechanical material para Permissible surface speeds
oscillating
meter. No conclusions regarding the tribological properties iglidur® A180 is developed for low surface speeds. The 15
Wear [µm/km]
0.1
to interactions. 5
25
5 Continuous 0.8 0.6 3.5 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Short-term 1.2 1 5 steel, as a function of the pressure
0
20 30 40 50 60 70 80 90 Table 03: Maximum surface speeds
Temperature [°C]
Shaft materials Installation tolerances
Diagram 02: Permissible maximum surface pressure of
Diagram 06 shows the test results of iglidur® A180 bearings iglidur® A180 plain bearings are standard bearings for
as a function of temperature (28 MPa at +20 °C) Temperatures
running against various shaft materials. shafts with h-tolerance (recommended minimum h9). The
The short-term maximum application temperature is
The combination "iglidur® A180/hard-anodised aluminium" bearings are designed for pressfit into a housing machined
+110 °C. With increasing temperatures, the compressive
Diagram 03 shows the elastic deformation of iglidur® A180 clearly stands out. It attains good to excellent wear rates to a H7 tolerance. After being assembled into a nominal size
strength of iglidur® A180 plain bearings decreases. The dia-
at radial load. At the recommended maximum surface also with other shafts. With Cf53 shafts, the higher wear housing, in standard cases the inner diameter automatically
gram 02 shows this inverse relationship. The temperatures
pressure of 20 MPa the deformation is less than 2.5 %. in pivoting applications is exemplary compared to rotating adjusts to the E10 tolerances. For particular dimensions the
prevailing in the bearing system also have an influence on
Plastic deformation is minimal up to this radial load. applications (diagram 07). tolerance differs depending on the wall thickness (please
the bearing wear. At temperatures over +60 °C an additi-
However, it is also dependent on the service time. see product range table).
onal securing is required.
Shaft materials, page 52
Testing methods, page 57
Surface pressure, page 41 Application temperatures, page 49
Additional securing, page 49 iglidur® A180 Dry Greases Oil Water Diameter Shaft iglidur® A180 Housing
C. o. f. µ 0.05–0.23 0.09 0.04 0.04 d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Friction and wear Table 04: Coefficient of friction against steel (Ra = 1µm, up to 3 0–0.025 +0.014 +0.054 0 +0.010
Coefficient of friction and wear alter with the application 50 HRC) > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
parameters. With increasing load, the coefficient of friction > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
however sinks markedly (diagrams 04 and 05). > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
> 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Coefficients of friction and surfaces, page 47 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Wear resistance, page 50
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
366 Online tools and more information www.igus.eu/a180 3D-CAD files, prices and delivery time online www.igus.eu/a180 367
A180SM iglidur® A180 | Product range iglidur® A180 | Product range A180FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
368 Online tools and more information www.igus.eu/a180 3D-CAD files, prices and delivery time online www.igus.eu/a180 369
iglidur®
A180 My sketches
Load [MPa]
●● Food industry
Block pricing online Medium Resistance
0.1
No minimum order value. From batch size 1. 0.001 0.01 0.1 1.0 2.0 Alcohol + to 0
Surface speed [m/s] Hydrocarbons +
Max. +80 °C Diagram 01: Permissible pv values for iglidur® A200 Greases, oils without additives +
Min. –40 °C bearings with a wall thickness of 1 mm dry running against Fuels +
a steel shaft, at +20 °C, mounted in a steel housing Diluted acids 0 to –
Ø 1–32 mm Strong acids –
More dimensions upon request Moisture absorption Diluted alkalines +
The moisture absorption of iglidur® A200 plain bearings is Strong alkalines 0
Imperial dimensions available approximately 1.5 % weight in standard climatic conditions.
+ resistant 0 conditionally resistant – not resistant
From page 1391 The saturation limit submerged in water is 7.6 % weight. This
All data given at room temperature [+20 °C]
must be taken into account for these types of applications.
Table 02: Chemical resistance
Online product finder
Diagram, www.igus.eu/a200-moisture
www.igus.eu/iglidur-finder
Chemical table, page 1478
Vacuum
In a vacuum environment, iglidur® A200 plain bearings have
iglidur® A200 material complies with the requirements of the FDA (Food and Drug
restricted use.
Administration) specifications for repeated contact with food.
372 Online tools and more information www.igus.eu/a200 3D-CAD files, prices and delivery time online www.igus.eu/a200 373
A200 A200
+80 °C iglidur A200 | Technical data
®
iglidur A200 | Technical data ® +80 °C
18 MPa 18 MPa
10 1.0 6
Bearings made from iglidur® A200 are suitable for appli
cation in direct contact with foodstuffs. Hence they are 0.9 5
8
the ideal solution for bearing positions in machines for the
HR carbon steel
H.a. aluminium
small equipment for households, etc. As the admixture
Deformation [%]
4
Wear [µm/km]
of lubricants should be foregone in favour of food com 0.6 2
304 SS
patibility, the thermoplastic composition of iglidur® A200 2 0.5 1
Cf53
is particularly adjusted for abrasion resistance. In addition
0 0.4 0
the iglidur® A200 is characterised by its capacity to embed 0 6 12 18 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
dirt and by its quiet operating behaviour. Load [MPa] Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
The good wear properties, dirt resistance and the possibility Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
for dry operation allow to replace elaborately sealed, surface speed, p = 0.75 MPa 70
lubricated bearings for little costs. 60
0.8
50
Mechanical properties Permissible surface speeds
40
With increasing temperatures, the compressive strength iglidur® A200 was developed for low surface speeds. 0.6
30
Wear [µm/km]
20
02 shows this inverse relationship. The recommended an increase up to the continuous permissible temperature 0.4
maximum surface pressure is a mechanical material para occurs. This increase is a result of friction. This increase is 10
10 Diagrams 06 and 07 show the test results of iglidur® A200 iglidur® A200 plain bearings are standard bearings for
bearings running against various shaft materials. shafts with h-tolerance (recommended minimum h9). The
0 Temperatures In pivoting applications below a load p = 2 MPa, the wear of bearings are designed for pressfit into a housing machined
20 30 40 50 60 70 80 The maximum permissible short-term temperature is iglidur® A200 bearings is higher than in rotating applications to a H7 tolerance. After being assembled into a nominal size
Temperature [°C]
+170 °C. With increasing temperatures, the compressive with equal load. Here the HR carbon steel shaft is a positive housing, in standard cases the inner diameter automatically
Diagram 02: Permissible maximum surface pressure of
strength of iglidur® A200 plain bearings decreases. The dia- exception. adjusts to the D11 tolerances. For particular dimensions the
as a function of temperature (18 MPa at +20 °C)
gram 02 shows this inverse relationship. The temperatures tolerance differs depending on the wall thickness (please
prevailing in the bearing system also have an influence on Shaft materials, page 52 see product range table).
Diagram 03 shows the elastic deformation of iglidur® A200 the bearing wear. At temperatures over +50 °C an additional
Testing methods, page 57
at radial load. At the permissible maximum surface pressure securing is required. iglidur® A200 Dry Greases Oil Water
of 18 MPa the deformation is less than 2 %. A plastic C. o. f. µ 0.1–0.4 0.09 0.04 0.04 Diameter Shaft iglidur® A200 Housing
deformation can be ignored up to this value. However, it is Application temperatures, page 49 d1 [mm] h9 [mm] D11 [mm] H7 [mm]
Table 04: Coefficient of friction against steel (Ra = 1µm,
also dependent on the service time. Additional securing, page 49 up to 3 0–0.025 +0.020 +0.080 0 +0.010
50 HRC)
> 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
Surface pressure, page 41 > 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
Friction and wear
Just as the wear resistance, the coefficient of friction also > 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
changes with the load (diagrams 04 and 05). > 18 to 30 0–0.052 +0.065 +0.195 0 +0.021
> 30 to 50 0–0.062 +0.080 +0.240 0 +0.025
Coefficients of friction and surfaces, page 47 Table 05: Important tolerances for plain bearings
Wear resistance, page 50 according to ISO 3547-1 after pressfit
374 Online tools and more information www.igus.eu/a200 3D-CAD files, prices and delivery time online www.igus.eu/a200 375
ASM iglidur® A200 | Product range iglidur® A200 | Product range ASM
30°
Tolerance3) h13 Tolerance3) h13
Type Dimensions [mm]
14.0 16.0 20.0 ASM-1416-20 22.0 28.0 10.0 ASM-2228-10
14.0 20.0 10.0 ASM-1420-10 22.0 28.0 15.0 ASM-2228-15
d1
d2
0.5 ASM-1420-15 ASM-2228-20
14.0 20.0 15.0 22.0 28.0 20.0
14.0 20.0 20.0 ASM-1420-20 22.0 28.0 30.0 ASM-2228-30
30°
iglidur® material
15.0 17.0 10.0 ASM-1517-10 24.0 30.0 15.0 ASM-2430-15
b1
15.0 17.0 15.0 ASM-1517-15 24.0 30.0 20.0 ASM-2430-20
Outer-Ø d2
Inner-Ø d1
Length b1
15.0 21.0 10.0 ASM-1521-10 24.0 30.0 30.0 ASM-2430-30
Form S
Metric
15.0 21.0 15.0 ASM-1521-15 25.0 28.0 12.0 ASM-2528-12
2)
Thickness < 1 mm: chamfer = 20° 15.0 21.0 20.0 ASM-1521-20 25.0 28.0 20.0 ASM-2528-20
16.0 18.0 12.0 ASM-1618-12 25.0 30.0 20.0 ASM-2530-20
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 +0.050
16.0 18.0 20.0 ASM-1618-20 25.0 30.0 30.0 ASM-2530-30
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions +0.160
16.0 20.0 20.0 ASM-1620-20 25.0 30.0 40.0 ASM-2530-40
f [mm]: 0.3 0.5 0.8 1.2 16.0 20.0 25.0 ASM-1620-25 25.0 32.0 20.0 ASM-2532-20
Imperial dimensions available +0.065
From page 1399 16.0 22.0 12.0 ASM-1622-12 25.0 32.0 30.0 ASM-2532-30
Dimensions [mm] +0.195
16.0 22.0 15.0 ASM-1622-15 25.0 32.0 40.0 ASM-2532-40
d1 d1- d2 b1 Part No. d1 d1- d2 b1 Part No. 16.0 22.0 16.0 ASM-1622-16 26.0 30.0 20.0 ASM-2630-20
Tolerance3) h13 Tolerance3) h13 16.0 22.0 20.0 ASM-1622-20 26.0 32.0 30.0 ASM-2632-30
1.0 3.0 2.0 ASM-0103-02 8.0 10.0 8.0 ASM-0810-08 16.0 22.0 25.0 ASM-1622-25 27.0 34.0 20.0 ASM-2734-20
1.5 4.0 2.0 ASM-0104-02 8.0 10.0 10.0 ASM-0810-10 18.0 24.0 12.0 ASM-1824-12 27.0 34.0 30.0 ASM-2734-30
2.0 5.0 2.0 ASM-0205-02 8.0 11.0 8.0 ASM-0811-08 18.0 24.0 20.0 ASM-1824-20 27.0 34.0 40.0 ASM-2734-40
2.0 5.0 3.0 ASM-0205-03 8.0 11.0 12.0 ASM-0811-12 18.0 24.0 30.0 ASM-1824-30 28.0 33.0 20.0 ASM-2833-20
+0.020
2.5 6.0 3.0 ASM-0206-03 8.0 12.0 6.0 ASM-0812-06 20.0 23.0 15.0 ASM-2023-15 28.0 36.0 20.0 ASM-2836-20
+0.080
3.0 5.0 3.0 ASM-0305-03 8.0 12.0 8.0 ASM-0812-08 20.0 23.0 20.0 ASM-2023-20 28.0 36.0 30.0 ASM-2836-30
3.0 5.0 4.0 ASM-0305-04 8.0 12.0 10.0 ASM-0812-10 20.0 25.0 15.0 ASM-2025-15 28.0 36.0 40.0 ASM-2836-40
3.0 6.0 3.0 ASM-0306-03 8.0 12.0 12.0 ASM-0812-12 20.0 25.0 20.0 ASM-2025-20 30.0 38.0 20.0 ASM-3038-20
+0.065
3.0 6.0 4.0 ASM-0306-04 8.0 14.0 6.0 ASM-0814-06 20.0 25.0 30.0 ASM-2025-30 30.0 38.0 30.0 ASM-3038-30
+0.040 +0.195
4.0 7.0 3.0 ASM-0407-03 8.0 14.0 10.0 ASM-0814-10 20.0 26.0 15.0 ASM-2026-15 30.0 38.0 40.0 ASM-3038-40
+0.130
4.0 7.0 4.0 ASM-0407-04 9.0 12.0 14.0 ASM-0912-14 20.0 26.0 20.0 ASM-2026-20 32.0 40.0 20.0 ASM-3240-20
+0.080
4.0 7.0 6.0 ASM-0407-06 10.0 12.0 10.0 ASM-1012-10 20.0 26.0 30.0 ASM-2026-30 32.0 40.0 30.0 ASM-3240-30
+0.240
4.0 8.0 6.0 ASM-0408-06 10.0 14.0 6.0 ASM-1014-06 22.0 26.0 15.0 ASM-2226-15 32.0 40.0 40.0 ASM-3240-40
5.0 8.0 4.0 ASM-0508-04 10.0 14.0 8.0 ASM-1014-08 3)
After press-fit. Testing methods Page 57
5.0 8.0 5.0 ASM-0508-05 10.0 14.0 10.0 ASM-1014-10
5.0 8.0 8.0 ASM-0508-08 10.0 14.0 16.0 ASM-1014-16
5.0 +0.030 9.0 5.0 ASM-0509-05 10.0 16.0 6.0 ASM-1016-06
5.0 +0.105 9.0 8.0 ASM-0509-08 10.0 16.0 10.0 ASM-1016-10
6.0 8.0 10.0 ASM-0608-10 10.0 16.0 16.0 ASM-1016-16
6.0 9.0 6.0 ASM-0609-06 12.0 14.0 20.0 ASM-1214-20
6.0 10.0 4.0 ASM-0610-04 12.0 16.0 15.0 ASM-1216-15
6.0 10.0 6.0 ASM-0610-06 12.0 16.0 20.0 ASM-1216-20
6.0 10.0 10.0 ASM-0610-10 12.0 18.0 8.0 ASM-1218-08
+0.050
6.0 12.0 6.0 ASM-0612-06 12.0 18.0 10.0 ASM-1218-10
+0.160
6.0 12.0 10.0 ASM-0612-10 12.0 18.0 15.0 ASM-1218-15
7.0 10.0 5.0 ASM-0710-05 12.0 18.0 20.0 ASM-1218-20
+0.040
7.0 10.0 8.0 ASM-0710-08 14.0 16.0 10.0 ASM-1416-10 Couldn't find your size?
+0.130
8.0 10.0 6.0 ASM-0810-06 14.0 16.0 15.0 ASM-1416-15 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
3)
After press-fit. Testing methods Page 57 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
376 Online tools and more information www.igus.eu/a200 3D-CAD files, prices and delivery time online www.igus.eu/a200 377
AFM iglidur® A200 | Product range iglidur® A200 | Product range AFM
30
m
r d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
°
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
Type Dimensions [mm]
22.0 28.0 34.0 15.0 3.0 AFM-2228-15 27.0 34.0 40.0 40.0 4.0 AFM-2734-40
22.0 28.0 34.0 20.0 3.0 AFM-2228-20 28.0 36.0 42.0 20.0 4.0 AFM-2836-20
d2
d3
d1
22.0 28.0 34.0 30.0 3.0 AFM-2228-30 28.0 36.0 42.0 30.0 4.0 AFM-2836-30
+0.065
24.0 30.0 36.0 15.0 3.0 AFM-2430-15 28.0 36.0 42.0 40.0 4.0 AFM-2836-40
+0.195
iglidur® material
24.0 30.0 36.0 20.0 3.0 AFM-2430-20 30.0 38.0 44.0 20.0 4.0 AFM-3038-20
b2 +0.065
24.0 30.0 36.0 30.0 3.0 AFM-2430-30 30.0 38.0 44.0 30.0 4.0 AFM-3038-30
Outer-Ø d2
Inner-Ø d1
+0.195
Length b1
b1 25.0 32.0 38.0 20.0 4.0 AFM-2532-20 30.0 38.0 44.0 40.0 4.0 AFM-3038-40
Form F
Metric
25.0 32.0 38.0 30.0 4.0 AFM-2532-30 32.0 40.0 46.0 20.0 4.0 AFM-3240-20
2)
Thickness < 1 mm: chamfer = 20° +0.080
25.0 32.0 38.0 40.0 4.0 AFM-2532-40 32.0 40.0 46.0 30.0 4.0 AFM-3240-30
+0.240
27.0 34.0 40.0 20.0 4.0 AFM-2734-20 32.0 40.0 46.0 40.0 4.0 AFM-3240-40
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 27.0 34.0 40.0 30.0 4.0 AFM-2734-30
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 3)
After press-fit. Testing methods Page 57
f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available
From page 1426
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
1.0 3.0 5.0 2.0 1.0 AFM-0103-02 10.0 16.0 22.0 8.0 3.0 AFM-1016-08
1.5 4.0 6.0 2.0 1.0 AFM-0104-02 10.0 +0.040 16.0 22.0 10.0 3.0 AFM-1016-10
+0.020
2.0 5.0 8.0 3.0 1.5 AFM-0205-03 10.0 +0.130 16.0 22.0 16.0 3.0 AFM-1016-16
+0.080
2.5 6.0 9.0 3.0 1.5 AFM-0206-03 10.0 16.0 20.0 10.0 3.0 AFM-101620-10
3.0 6.0 9.0 4.0 1.5 AFM-0306-04 12.0 14.0 20.0 12.0 1.0 AFM-1214-12
4.0 8.0 12.0 4.0 2.0 AFM-0408-04 12.0 18.0 24.0 8.0 3.0 AFM-1218-08
4.0 8.0 12.0 6.0 2.0 AFM-0408-06 12.0 18.0 22.0 10.0 3.0 AFM-1218-10
5.0 7.0 11.0 5.0 1.0 AFM-0507-05 12.0 18.0 24.0 12.0 3.0 AFM-1218-12
5.0 9.0 13.0 5.0 2.0 AFM-0509-05 12.0 18.0 22.0 15.0 3.0 AFM-1218-15
5.0 9.0 13.0 6.0 2.0 AFM-0509-06 12.0 18.0 22.0 20.0 3.0 AFM-1218-20
+0.030
5.0 9.0 13.0 8.0 2.0 AFM-0509-08 14.0 20.0 25.0 10.0 3.0 AFM-1420-10
+0.105
6.0 10.0 14.0 4.0 2.0 AFM-0610-04 14.0 20.0 25.0 15.0 3.0 AFM-1420-15
6.0 10.0 14.0 6.0 2.0 AFM-0610-06 14.0 20.0 25.0 20.0 3.0 AFM-1420-20
6.0 10.0 14.0 10.0 2.0 AFM-0610-10 15.0 21.0 27.0 10.0 3.0 AFM-1521-10
+0.050
6.0 12.0 14.0 6.0 3.0 AFM-0612-06 15.0 21.0 27.0 15.0 3.0 AFM-1521-15
+0.160
6.0 12.0 14.0 10.0 3.0 AFM-0612-10 15.0 21.0 27.0 20.0 3.0 AFM-1521-20
7.0 11.0 15.0 8.0 2.0 AFM-0711-08 15.0 21.0 27.0 25.0 3.0 AFM-1521-25
8.0 11.0 13.0 8.0 2.0 AFM-0811-08 16.0 22.0 28.0 12.0 3.0 AFM-1622-12
8.0 12.0 16.0 6.0 2.0 AFM-0812-06 16.0 22.0 28.0 15.0 3.0 AFM-1622-15
8.0 12.0 16.0 8.0 2.0 AFM-0812-08 16.0 22.0 28.0 20.0 3.0 AFM-1622-20
8.0 12.0 16.0 12.0 2.0 AFM-0812-12 16.0 22.0 28.0 25.0 3.0 AFM-1622-25
8.0 +0.040 12.0 16.0 22.0 2.0 AFM-0812-22 18.0 24.0 30.0 12.0 3.0 AFM-1824-12
8.0 +0.130 14.0 18.0 6.0 3.0 AFM-0814-06 18.0 24.0 30.0 18.0 3.0 AFM-1824-18
8.0 14.0 18.0 10.0 3.0 AFM-0814-10 18.0 24.0 30.0 20.0 3.0 AFM-1824-20 Couldn't find your size?
9.0 14.0 19.0 6.0 2.0 AFM-0914-06 18.0 24.0 30.0 30.0 3.0 AFM-1824-30 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
9.0 14.0 19.0 10.0 2.0 AFM-0914-10 20.0 26.0 32.0 15.0 3.0 AFM-2026-15 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
+0.065
9.0 14.0 19.0 14.0 2.0 AFM-0914-14 20.0 26.0 32.0 20.0 3.0 AFM-2026-20 Even more dimensions from stock
+0.195
10.0 16.0 22.0 6.0 3.0 AFM-1016-06 20.0 26.0 32.0 30.0 3.0 AFM-2026-30 More than 300 dimensions are now available. Search online for your required bearing.
3)
After press-fit. Testing methods Page 57 www.igus.eu/iglidur-specialbearings
378 Online tools and more information www.igus.eu/a200 3D-CAD files, prices and delivery time online www.igus.eu/a200 379
iglidur®
A200 My sketches
Load [MPa]
resistance is required for dry running radiation.
Available from stock iglidur® R, page 221
0.1
Detailed information about delivery time online. 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Typical application areas Surface speed [m/s] Alcohol +
Block pricing online ●● Food industry Diagram 01: Permissible pv values for iglidur® A160 Hydrocarbons +
No minimum order value. From batch size 1. ●● Beverage technology bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
●● Medical technology a steel shaft, at +20 °C, mounted in a steel housing Fuels + to 0
Max. +90 °C Diluted acids +
Min. –50 °C Strong acids +
Moisture absorption
The humidity absorption of iglidur® A160 bearings amounts Diluted alkalines +
Ø 6–20 mm Strong alkalines +
to about 0.1 % weight in standard climatic conditions. The
More dimensions upon request
saturation limit submerged in water is also approximately + resistant 0 conditionally resistant – not resistant
0.1 % weight. All data given at room temperature [+20 °C]
Online product finder
Table 02: Chemical resistance
www.igus.eu/iglidur-finder
Vacuum
When used in a vacuum, the iglidur® A160 plain bearings Chemical table, page 1478
iglidur A160 material complies with EC Directive 10/2011 EC and also with FDA
®
release moisture as a vapour. Use in a vacuum environment
(Food and Drug Administration) specifications for repeated contact with food. is only possible with dehumidified bearings.
382 Online tools and more information www.igus.eu/a160 3D-CAD files, prices and delivery time online www.igus.eu/a160 383
A160 A160
+90 °C iglidur A160 | Technical data
®
iglidur A160 | Technical data ® +90 °C
15 MPa 15 MPa
0.6 2.0
iglidur® A160 plain bearings are characterised by extreme Permissible surface speeds
media resistance at a low cost. Tribologically optimised, the iglidur® A160 was developed for low surface speeds. Maxi- 0.5
1.5
material can be used in up to +90 °C and also possesses mum speeds up to 0.5 m/s (rotating) and 2.0 m/s (linear)
HR carbon steel
H.a. aluminium
The profile of properties is completed by the "optical operation.
Wear [µm/km]
detectability", i.e. the blue colour, often required in the The given values in table 03 indicate the limits at which 0.2
0.5
304 SS
industry. an increase up to the continuous permissible temperature 0.1
Cf53
occurs. This increase is a result of friction. In practice,
0.0 0.0
Mechanical properties though, this temperature level is rarely reached, due to 0.1 0.2 0.3 0.4 0.5 Diagram 06: Wear, rotating with different shaft materials,
With increasing temperatures, the compressive strength varying application conditions. Surface speed [m/s]
pressure, p = 1 MPa, v = 0.3 m/s
of iglidur® A160 plain bearings decreases. The permissible Diagram 04: Coefficient of friction as a function of the
maximum surface pressure is a mechanical material Surface speed, page 44 surface speed, p = 1 MPa
parameter. No conc lusions regarding the tribological pv value and lubrication, page 86 160
rotating
properties can be drawn from this. 0.3
oscillating
m/s Rotating Oscillating Linear 120
20 Continuous 0.5 0.4 2
Wear [µm/km]
Table 03: Maximum surface speeds
40
0.1
10
0
Temperatures
Load [MPa]
5 0.0 5 10 15 20
With increasing temperatures, the compressive strength 0 2.5 5 7.5 10 12.5 15 Load [MPa]
of iglidur® A160 plain bearings decreases. The diagram 02 Load [MPa] Diagram 07: Wear for oscillating and rotating applica
0
20 30 40 50 60 70 80 90 shows this inverse relationship. The temperatures prevailing Diagram 05: Coefficient of friction as a function of the tions with shaft material Cf53 hardened and ground
Temperature [°C] in the bearing system also have an influence on the bearing pressure, v = 0.01 m/s steel, as a function of the pressure
Diagram 02: Permissible maximum surface pressure of wear. At temperatures over +60 °C an additional securing
as a function of temperature (15 MPa at +20 °C) is required.
Shaft materials Installation tolerances
Diagram 06 shows results of testing different shaft materials iglidur® A160 plain bearings are standard bearings for
Application temperatures, page 49
with plain bearings made from iglidur® A160 running dry. For shafts with h-tolerance (recommended minimum h9). The
Diagram 03 shows the elastic deformation of iglidur® A160 Additional securing, page 49
rotational applications with low loads, the most interesting, bearings are designed for pressfit into a housing machined
during radial loading. Plastic deformation is minimal up to a
media- and corrosion-resistant shaft materials 304 stainless to a H7 tolerance. After being assembled into a nominal
radial load of 15 MPa. It is nonetheless depending on the
steel, high grade steel and hard chrome-plated steel reveal size housing, the inner diameter automatically adjusts to
duration of the applied force. Friction and wear
themselves as particularly good counter partners. On high the E10 tolerances.
Coefficient of friction and wear resistance alter with the
grade steel shafts, however, the wear increases the fast-
Surface pressure, page 41 application parameters. For iglidur ® A160 bearings,
est with the load (diagram 06). With Cf53 shafts, the wear Testing methods, page 57
the alteration of the coefficient of friction µ depends on
in pivoting applications is exemplary compared to rotating
surface speed and the shaft surface finish is only negligently
12 applications. In rotation the wear, as with many other iglidur® Diameter Shaft iglidur® A160 Housing
pronounced. With increasing load, the coefficient of friction
materials, is higher than when pivoting (diagram 07). d1 [mm] h9 [mm] E10 [mm] H7 [mm]
10 however sinks markedly. In the Ra range between 0.6 and
+23 °C +60 °C 0.7 µm, the coefficient of friction attains the optimum value. up to 3 0–0.025 +0.014 +0.054 0 +0.010
8
Shaft materials, page 52 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
6 > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Coefficients of friction and surfaces, page 47
Deformation [%]
4 Wear resistance, page 50 iglidur® A160 Dry Greases Oil Water > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
C. o. f. µ 0.09–0.19 0.08 0.03 0.04 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
2
Table 04: Coefficient of friction against steel (Ra = 1µm, > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
0
0 3 6 9 12 15 50 HRC) Table 05: Important tolerances for plain bearings
Load [MPa] according to ISO 3547-1 after pressfit
Diagram 03: Deformation under pressure and temperature
384 Online tools and more information www.igus.eu/a160 3D-CAD files, prices and delivery time online www.igus.eu/a160 385
A160SM iglidur® A160 | Product range iglidur® A160 | Product range A160FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
386 Online tools and more information www.igus.eu/a160 3D-CAD files, prices and delivery time online www.igus.eu/a160 387
iglidur®
A160 My sketches
Load [MPa]
required
properties can be affected.
iglidur® G, page 79
0.1
Available from stock Typical application areas 0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol + to 0
Detailed information about delivery time online. ●● Food industry
Diagram 01: Permissible pv values for iglidur® A290 Hydrocarbons +
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Block pricing online
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
No minimum order value. From batch size 1.
Diluted acids 0 to –
Moisture absorption Strong acids –
Max. +140 °C
The moisture absorption of iglidur® A290 bearings is Diluted alkalines +
Min. –40 °C
approximately 1.7 % weight in standard climatic conditions. Strong alkalines + to 0
The saturation limit in water is 7.3 % weight, a disadvantage
Ø 3–50 mm + resistant 0 conditionally resistant – not resistant
which must be accounted for by all means in applications
More dimensions upon request All data given at room temperature [+20 °C]
in humid and wet areas.
Table 02: Chemical resistance
Online product finder Diagram, www.igus.eu/a290-moisture
www.igus.eu/iglidur-finder
Vacuum Chemical table, page 1478
In a vacuum environment iglidur® A290 plain bearings have
The material iglidur® A290 complies with the requirements of the BfR (German institute for
limited use due to the high moisture absorption.
food safety) for contact with food.
390 Online tools and more information www.igus.eu/a290 3D-CAD files, prices and delivery time online www.igus.eu/a290 391
A290 A290
+140 °C iglidur A290 | Technical data
®
iglidur A290 | Technical data ® +140 °C
70 MPa 70 MPa
0.50 60
iglidur® A290 bearings are an advanced development for Permissible surface speeds
0.45
the use in food industry. Compared to the bearings made iglidur® A290 is suitable for low surface speeds. Due to 50
0.40
from iglidur® A200, the tribological properties could be the relatively high friction particularly in the low load range,
Wear [µm/km]
Mechanical properties increases. 20
0.20
With increasing temperatures, the compressive strength 10
0.15
of iglidur® A290 plain bearings decreases. The diagram Surface speed, page 44
0.10 0
02 shows this inverse relationship. The recommended 0 10 20 30 40 50 60 70 Cf53 hard chro- 304 SS HR carbon
maximum surface pressure is a mechanical material Load [MPa] med steel
m/s Rotating Oscillating Linear
parameter. No conclusions regarding the tribological Continuous 1 0.7 3 Diagram 05: Coefficient of friction as a function of the rotating oscillating
properties can be drawn from this. Short-term 2 1.4 4 pressure, v = 0.01 m/s Diagram 07: Wear for rotating and oscillating applica
tions with different shaft materials, p = 2 MPa
Table 03: Maximum surface speeds
120
100
Temperatures Shaft materials Installation tolerances
80
With increasing temperatures, the compressive strength Diagrams 06 and 07 display a summary of the results of iglidur® A290 plain bearings are standard bearings for
60 of iglidur® A290 plain bearings decreases. The diagram 02 tests with different shaft materials conducted with bearings shafts with h-tolerance (recommended minimum h9). The
40
shows this inverse relationship. The ambient application made from iglidur® A290. Compared to iglidur® A200, the bearings are designed for pressfit into a housing machined
Load [MPa]
temperature has a direct impact on bearing wear, an improved tribological properties of iglidur® A290 are also to a H7 tolerance. After being assembled into a nominal size
20
increase in temperature results in an increase in wear. reflected in the wear. At low loads, the differences in the housing, in standard cases the inner diameter automatically
0 With increasing temperatures, the wear increases and this wear resistance of the combinations of iglidur® A290 with adjusts to the D11 tolerances. For particular dimensions the
20 50 80 120 140 effect is significant when temperatures rise over +120 °C. different shaft materials are very distinct. tolerance differs depending on the wall thickness (please
Temperature [°C]
At temperatures over +110 °C an additional securing is see product range table).
Diagram 02: Permissible maximum surface pressure of
required. Shaft materials, page 52
as a function of temperature (70 MPa at +20 °C)
Testing methods, page 57
Application temperatures, page 49 iglidur® A290 Dry Greases Oil Water
Additional securing, page 49 C. o. f. µ 0.13–0.40 0.09 0.04 0.04 Diameter Shaft iglidur® A290 Housing
At this load, the deformation is only about 2.5 % at room
temperature. A plastic deformation can be negligible up Table 04: Coefficient of friction against steel (Ra = 1µm, d1 [mm] h9 [mm] D11 [mm] H7 [mm]
to this load. However, it is also dependent on the service Friction and wear 50 HRC) up to 3 0–0.025 +0.020 +0.080 0 +0.010
time. Diagram 03 shows the deformation of iglidur® A290 The coefficient of friction alters like the wear resistance with > 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
as a function of radial pressure. increasing load and speed (diagrams 04 and 05). > 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
> 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
30 > 18 to 30 0–0.052 +0.065 +0.195 0 +0.021
Surface pressure, page 41 Coefficients of friction and surfaces, page 47 27
Wear resistance, page 50 > 30 to 50 0–0.062 +0.080 +0.240 0 +0.025
24
21 > 50 to 80 0–0.074 +0.100 +0.290 0 +0.030
HR carbon steel
H.a. aluminium
Wear [µm/km] 12
according to ISO 3547-1 after pressfit
8
9
Coefficient of friction [µ]
304 SS
6
6
Cf53
3
Deformation [%]
0
4
0.4 Diagram 06: Wear, rotating with different shaft materials,
2 pressure, p = 1 MPa, v = 0.3 m/s
0 0.3
0 10 20 30 40 50 60 70 0.05 0.10 0.15 0.20 0.25 0.30 0.35 0.40
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
392 Online tools and more information www.igus.eu/a290 3D-CAD files, prices and delivery time online www.igus.eu/a290 393
A290SM iglidur® A290 | Product range iglidur® A290 | Product range A290FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
394 Online tools and more information www.igus.eu/a290 3D-CAD files, prices and delivery time online www.igus.eu/a290 395
iglidur®
A290 My sketches
Load [MPa]
UV radiation.
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® UW160 Hydrocarbons +
Available from stock
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Detailed information about delivery time online.
a steel shaft, at +20 °C, mounted in a steel housing Fuels + to 0
Block pricing online Diluted acids +
No minimum order value. From batch size 1. Moisture absorption Strong acids +
The moisture absorption of iglidur® UW160 plain bearings is Diluted alkalines +
Max. +90 °C approximately 0.1 % weight in standard climatic conditions. Strong alkalines +
Min. –50 °C The saturation limit submerged in water is 0.1 % weight. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Ø 3–10 mm Vacuum Table 02: Chemical resistance
More dimensions upon request When used in a vacuum environment, the iglidur® UW160
plain bearings release moisture as a vapour. Use in a vacuum Chemical table, page 1478
Online product finder environment is only possible with dehumidified bearings.
www.igus.eu/iglidur-finder
398 Online tools and more information www.igus.eu/uw160 3D-CAD files, prices and delivery time online www.igus.eu/uw160 399
UW160 UW160
+90 °C iglidur UW160 | Technical data
®
iglidur UW160 | Technical data ® +90 °C
15 MPa 15 MPa
0.6 15
iglidur® UW160 was developed quite specifically with Permissible surface speeds
regard to maximum wear resistance in media-based The maximum allowable sliding speed is based on the friction 0.5
12
continuous operation. In such applications, low radial loads heat generated at the bearing surface. The temperature
HR carbon steel
H.a. aluminium
for contact with drinking water and very good durability ensure a sustainable use of the bearing with respect to 6
Wear [µm/km]
complete the profile of properties. wear and dimensional integrity. 0.2
304 SS
The maximum values specified in table 03 are for the 0.1 3
Cf53
Mechanical properties dry operation. In media-based application, sometimes
0.0 0
With increasing temperatures, the compressive strength of significantly higher speeds are achieved due to reduced 0.1 0.2 0.3 0.4 0.5 Diagram 06: Wear, rotating with different shaft materials,
iglidur® UW160 plain bearings decreases. The recommen heat generation depending on the installation. Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
ded maximum surface pressure is a mechanical material Diagram 04: Coefficient of friction as a function of the
parameter. No conclusions regarding the tribological pro Surface speed, page 44 surface speed, p = 1 MPa
perties can be drawn from this. 160
rotating
m/s Rotating Oscillating Linear 0.3
oscillating
20 Continuous 0.3 0.3 1 120
Wear [µm/km]
10 40
0.1
Temperatures
Load [MPa]
5 0
iglidur® UW160 was developed for use in liquid media in 5 10 15 20
0.0
normal and medium temperature range. 0 2.5 5 7.5 10 12.5 15 Load [MPa]
0
20 30 40 50 60 70 80 90 As with all thermoplastics, the compression resistance of Load [MPa] Diagram 07: Wear for oscillating and rotating applica
Temperature [°C] iglidur® UW160 decreases with increasing temperature. Diagram 05: Coefficient of friction as a function of the tions with shaft material Cf53 hardened and ground
Diagram 02: Permissible maximum surface pressure of The temperatures prevailing in the bearing system also pressure, v = 0.01 m/s steel, as a function of the pressure
as a function of temperature (15 MPa at +20 °C) have an influence on the bearing wear. The wear rises with
increasing temperatures. At temperatures over +70 °C an
Shaft materials Installation tolerances
Diagram 03 shows the elastic deformation of iglidur® UW160 additional securing is required.
Diagram 06 shows results of testing different shaft materials iglidur® UW160 plain bearings are standard bearings for
during radial loading.
with plain bearings made from iglidur® UW160 running dry. shafts with h-tolerance (recommended minimum h9). The
Application temperatures, page 49
In the example of a rotational movement with radial loads bearings are designed for pressfit into a housing machined
Surface pressure, page 41 Additional securing, page 49
of 1 MPa and a speed of 0.3 m/s, it becomes clear that to a H7 tolerance. After being assembled into a nominal
iglidur® UW160 achieves good wear values with the most size housing, the inner diameter automatically adjusts to
10
varied shaftsup to the pairing with 304 SS shafts. It is also the E10 tolerances.
Friction and wear
8 clear that there are better iglidur® materials for dry running.
Coefficient of friction and wear alter with the application Testing methods, page 57
+23 °C +60 °C As with many other iglidur® materials in dry running, diagram
6 parameters. The influence of surface speed and surface
07 shows the significantly higher wear in rotation than in Diameter Shaft iglidur® UW160 Housing
finish of the shaft on the friction coefficient is low, but with
pivoting with otherwise identical parameters.
Deformation [%]
4 increasing radial load the coefficient of friction decreases d1 [mm] h9 [mm] E10 [mm] H7 [mm]
significantly, mainly in the range of up to 7.5 MPa. up to 3 0–0.025 +0.014 +0.054 0 +0.010
2 Shaft materials, page 52 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
0 Coefficients of friction and surfaces, page 47 > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
0 5 10 15 Wear resistance, page 50 iglidur® UW160 Dry Greases Oil Water > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
Load [MPa] C. o. f. µ 0.17–0.31 0.08 0.03 0.03 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Diagram 03: Deformation under pressure and temperature > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Table 04: Coefficient of friction against steel (Ra = 1µm,
50 HRC) > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
> 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
> 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
400 Online tools and more information www.igus.eu/uw160 3D-CAD files, prices and delivery time online www.igus.eu/uw160 401
UW160SM iglidur® UW160 | Product range iglidur® UW160 | Product range UW160FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
402 Online tools and more information www.igus.eu/uw160 3D-CAD files, prices and delivery time online www.igus.eu/uw160 403
iglidur®
UW160 My sketches
Load [MPa]
Typical application areas
Available upon request ●● Tobaccoprocessing industry 0.1
Medium Resistance
Detailed information about delivery time online. 0.001 0.01 0.1 1.0 10.0 Alcohol +
Surface speed [m/s] Hydrocarbons –
Diagram 01: Permissible pv values for iglidur® T220 Greases, oils without additives +
Order-related bearings with a wall thickness of 1 mm dry running against Fuels +
a steel shaft, at +20 °C, mounted in a steel housing Diluted acids 0
Max. +100 °C Strong acids –
Moisture absorption Diluted alkalines –
Min. –40 °C
The moisture absorption of iglidur® T220 plain bearings is Strong alkalines –
approximately 0.3 % weight in standard climatic conditions.
+ resistant 0 conditionally resistant – not resistant
Order-related The saturation limit in water is 0.5 % weight. These values
All data given at room temperature [+20 °C]
are so low that consideration of expansion by moisture
Table 02: Chemical resistance
absorption is only required under extreme circumstances.
Online product finder
www.igus.eu/iglidur-finder Diagram, www.igus.eu/t220-moisture Chemical table, page 1478
Vacuum
iglidur T220 material complies with the requirements of the FDA (Food and Drug
®
Only dehumidified bearings of iglidur® T220 should be
Administration) specifications for repeated contact with food. tested in vacuum.
406 Online tools and more information www.igus.eu/t220 3D-CAD files, prices and delivery time online www.igus.eu/t220 407
T220 T220
+100 °C iglidur T220 | Technical data
®
iglidur T220 | Technical data ® +100 °C
40 MPa 40 MPa
0.7 100
iglidur® T220 is a special material for applications in the Permissible surface speeds
0.6 rotating oscillating
tobacco processing industry. It fulfils the demands of the The maximum speeds of iglidur® T220 bearings amount 80
tobacco industry (engineering database). The material is to 0.4 m/s with continuous rotation. The friction and the 0.5
by reputed manufacturers from 2004 onward. follows that intermittent service or in linear movements, 0.3 40
Wear [µm/km]
higher speeds can be attained. 0.2
Mechanical properties 0.1
20
H.a. aluminium
3.0 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Wear [µm/km]
2.5 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
2.0
304 SS
12.8 0.5 > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
1.5
Cf53
1.0
+23 °C +60 °C 0.0 Table 05: Important tolerances for plain bearings
10.0 0.4
Diagram 06: Wear, rotating with different shaft materials, according to ISO 3547-1 after pressfit
Coefficient of friction [µ]
5.0
Product range
2.1 0.2
iglidur® T220 plain bearings are manufactured to special
order.
0.0 0.1
0 15 30 45 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
408 Online tools and more information www.igus.eu/t220 3D-CAD files, prices and delivery time online www.igus.eu/t220 409
iglidur plain bearing materials
®
Coefficient of friction
Temperature [°C] 123)
Price index
[MPa] 124)
[µ] 125)
120
iglidur® Q2 – The durable heavy-duty bearing
Combined wear resistance and compressive strength
130
at high loads 0.17 1.50
Page 415 iglidur® Q bearings cope with high loads just as well Rugged heavy-duty polymer plain bearings are used
with various pivoting angles and are ideally suitable in the pendular trapezoidal axles that are produced
100 for the application in the "Zoob" electric scooter. in series. The lubrication-free machine components
iglidur® Q – The peak of stability have been proving their worth for many years.
Long service life at moderate to high loads 135
0.19 1.90
Page 423
412 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 413
The durable heavy-duty bearing –
iglidur Q2 ®
414
Q2
iglidur®
Q2 iglidur Q2 | The durable heavy-duty bearing
®
iglidur Q2 | Technical data
® +130 °C
120 MPa
Combined wear resistance and compressive strength at high loads
Material properties
Where previous iglidur® bearing solutions within General properties Unit iglidur® Q2 Testing method
the scope of extreme loads and strong impact Density g/cm3 1.46
Lubrication and forces, the iglidur® Q2 starts. Made for heavy-duty Colour beige-brown
maintenance-free pivoting applications under extreme conditions. Max. moisture absorption at +23 °C/50 % r.h. % weight 1.1 DIN 53495
Max. water absorption % weight 4.6
Coefficient of sliding friction, dynamic, against steel µ 0.22–0.42
pv value, max. (dry) MPa · m/s 0.7
When to use it? Mechanical properties
Wear resistant and Flexural modulus MPa 8,370 DIN 53457
●● When high dynamic loads occur
dimensionally stable Flexural strength at +20 °C MPa 240 DIN 53452
●● When impacts, shocks and contamination
at high loads Compressive strength MPa 130
occur in addition to high loads
●● For highly load pivoting motions Max. recommended surface pressure (+20 °C) MPa 120
Shore-D hardness 80 DIN 53505
Physical and thermal properties
Max. long-term application temperature °C +130
Good cost/ When not to use it? Max. short-term application temperature °C +200
performance ratio ●● When only static loads occur Min. long-term application temperature °C –40
iglidur® X, page 245 Heat conductivity W/m · K 0.24 ASTM C 177
iglidur® H2, page 329 Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
8 DIN 53752
●● When high pv values occur in conjunction Electrical properties
with high speeds Specific contact resistance Ωcm > 1013 DIN IEC 93
iglidur® Z, page 255 Surface resistance Ω > 10 11
DIN 53482
●● When you need a low cost all-round bearing Table 01: Material properties table
Shock resistant
iglidur® G, page 79
1,000.0
●● When soft shafts are in use Radiation resistance
iglidur® W300, page 153 Plain bearings made from iglidur ® Q2 are resistant to
100.0
radiation up to an intensity of 3 · 102 Gy.
Typical application areas
10.0
●● Agricultural machines UV resistance
●● Utility and construction vehicles iglidur® Q2 are permanently resistant to UV radiation.
Load [MPa]
1.0
●● Machine building
416 Online tools and more information www.igus.eu/q2 3D-CAD files, prices and delivery time online www.igus.eu/q2 417
Q2 Q2
+130 °C iglidur Q2 | Technical data
®
iglidur Q2 | Technical data ® +130 °C
120 MPa 120 MPa
0.6 200
iglidur® Q2 plain bearings represent high load capacities and Permissible surface speeds 180
good abrasion resistance at high loads. The price-perfor- The typical applications for iglidur® Q2 plain bearings are 0.5 160
mance ratio is outstanding. Solid lubricants reduce the coef- highly loaded pivoting motions at comparatively low speeds. 140
Wear [µm/km]
bearings, especially for highly loaded pivot applications. mal bearing loads. With higher loads, the permitted speed 60
drops with the extent of the load due to the limitations by 0.2 40
Cf53
20
Mechanical properties the pv value.
0.1 0
With increasing temperatures, the compressive strength 0.1 0.2 0.3 0.4 0.5 0.6 0.7 Diagram 06: Wear, pivoting with different shaft materials,
of iglidur® Q2 plain bearings decreases. The diagram 02 Surface speed, page 44 Surface speed [m/s]
pressure p = 45 MPa, v = 0.01 m/s
shows this inverse relationship. With the long-term per- Diagram 04: Coefficient of friction as a function of the
mitted application temperature of +130 °C, the permitted m/s Rotating Oscillating Linear surface speed, p = 0.75 MPa 670
surface pressure still amounts to 20 MPa. The permissible 180
Continuous 1 0.7 4 rotating oscillating
160
maximum surface pressure is a mechanical material para- Short-term 2 1.4 5 0.35
140
meter. No conclusions regarding the tribological properties 0.30 120
Table 03: Maximum surface speeds
can be drawn from this. 0.25
100
Wear [µm/km]
0.20 60
160
Temperatures 0.15 40
140 20
iglidur Q2 is a very temperature resistant material. The
®
0.10
120 0
long-term upper temperature limit of +130 °C permits the 1 2 10 20 45 76 100
100 0.05
broad use in applications typical for the agricultural, utility Load [MPa]
80 0.00
vehicle or construction equipment sectors. However, the 0 10 20 30 40 50 60 70 80 Diagram 07: Wear for oscillating and rotating applica
60
pressure resistance of iglidur® Q2 plain bearings declines Load [MPa] tions with shaft material Cf53 hardened and ground
Load [MPa]
40
as temperatures increase. At temperatures over +70 °C an Diagram 05: Coefficient of friction as a function of the steel, as a function of the pressure
20
additional securing is required. When considering tempe- pressure, v = 0.01 m/s
0
ratures, the additional frictional heat in the bearing system
20 30 40 50 60 70 80 90 100 110 120 130 Installation tolerances
Temperature [°C] must be taken into account.
Shaft materials iglidur® Q2 plain bearings are standard bearings for shafts
Diagram 02: Permissible maximum surface pressure of
Generally speaking, we recommend the use of hardened with h-tolerance (recommended minimum h9). The bearings
as a function of temperature (120 MPa at +20 °C) Application temperatures, page 49
shafts for highly loaded applications. Furthermore, even at are designed for pressfit into a housing machined to a H7
Additional securing, page 49
low to medium loads, iglidur® Q2 will give increased service tolerance. After being assembled into a nominal size housing,
Diagram 03 shows the elastic deformation of iglidur® Q2
life with "hard" shafts as compared to "soft" shafts. But for the inner diameter automatically adjusts to the E10 tolerances.
at radial loads.
low load applications, the results are outstanding with free For particular dimensions the tolerance differs depending on
Friction and wear
Surface pressure, page 41 cutting steel as well. For high loads, the wear in pivoting the wall thickness (please see product range table).
iglidur® Q2 has a low coefficient of friction. Please note
applications is much lower than for rotations. If the shaft
that a sliding surface with a rough surface finish will incre- Testing methods, page 57
9.0 material you plan on using is not shown in these test results,
ase the friction. The highest coefficients of friction occur at
8.0 please contact us. Diameter Shaft iglidur® Q2 Housing
7.0 +23 °C +60 °C Ra = 1 μm. We recommend shaft surface finishes (Ra) of
0.1 to a maximum of 0.4 µm. Furthermore, the coefficient d1 [mm] h9 [mm] E10 [mm] H7 [mm]
6.0
Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
5.0 of friction of iglidur® Q2 plain bearings largely depends on
4.0 the speed and load. The coefficient of friction also quic- > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Deformation [%]
418 Online tools and more information www.igus.eu/q2 3D-CAD files, prices and delivery time online www.igus.eu/q2 419
Q2SM iglidur® Q2 | Product range iglidur® Q2 | Product range Q2SM
30°
h13 h13
Type Dimensions [mm]
30.0 +0.040 34.0 40.0 Q2SM-3034-40 45.0 50.0 20.0 Q2SM-4550-20
30.0 +0.124 35.0 40.0 Q2SM-3035-40 45.0 50.0 30.0 Q2SM-4550-30
d1
d2
0.5 Q2SM-3236-20 Q2SM-4550-40
32.0 36.0 20.0 45.0 50.0 40.0
32.0 36.0 30.0 Q2SM-3236-30 45.0 50.0 50.0 Q2SM-4550-50
+0.050
30°
iglidur® material
32.0 36.0 40.0 Q2SM-3236-40 50.0 55.0 20.0 Q2SM-5055-20
b1 +0.150
32.0 40.0 40.0 Q2SM-3240-40 50.0 55.0 30.0 Q2SM-5055-30
Outer-Ø d2
Inner-Ø d1
Length b1
35.0 39.0 20.0 Q2SM-3539-20 50.0 55.0 40.0 Q2SM-5055-40
Form S
Metric
35.0 +0.050 39.0 30.0 Q2SM-3539-30 50.0 55.0 50.0 Q2SM-5055-50
2)
Thickness < 1 mm: chamfer = 20° 35.0 +0.150 39.0 40.0 Q2SM-3539-40 50.0 55.0 60.0 Q2SM-5055-60
35.0 39.0 50.0 Q2SM-3539-50 60.0 65.0 60.0 Q2SM-6065-60
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 40.0 44.0 20.0 Q2SM-4044-20 65.0 +0.060 70.0 60.0 Q2SM-6570-60
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions 40.0 44.0 30.0 Q2SM-4044-30 70.0 +0.180 75.0 60.0 Q2SM-7075-60
f [mm]: 0.3 0.5 0.8 1.2 40.0 44.0 40.0 Q2SM-4044-40 75.0 80.0 40.0 Q2SM-7580-40
Imperial dimensions available
From page 1417 40.0 44.0 50.0 Q2SM-4044-50
Dimensions [mm] 3)
After press-fit. Testing methods Page 57
d1 d1-Tolerance 3)
d2 b1 Part No. d1 d1-Tolerance 3)
d2 b1 Part No.
h13 h13
4.0 5.5 4.0 Q2SM-0405-04 16.0 18.0 20.0 Q2SM-1618-20
4.0 5.5 6.0 Q2SM-0405-06 16.0 18.0 25.0 Q2SM-1618-25
+0.032
5.0 7.0 5.0 Q2SM-0507-05 18.0 20.0 15.0 Q2SM-1820-15
+0.020 +0.102
5.0 7.0 10.0 Q2SM-0507-10 18.0 20.0 20.0 Q2SM-1820-20
+0.068
6.0 8.0 6.0 Q2SM-0608-06 18.0 20.0 25.0 Q2SM-1820-25
6.0 8.0 8.0 Q2SM-0608-08 20.0 23.0 10.0 Q2SM-2023-10
6.0 8.0 10.0 Q2SM-0608-10 20.0 23.0 15.0 Q2SM-2023-15
8.0 10.0 8.0 Q2SM-0810-08 20.0 23.0 20.0 Q2SM-2023-20
8.0 10.0 10.0 Q2SM-0810-10 20.0 23.0 25.0 Q2SM-2023-25
8.0 10.0 12.0 Q2SM-0810-12 20.0 23.0 30.0 Q2SM-2023-30
10.0 +0.025 12.0 8.0 Q2SM-1012-08 22.0 25.0 15.0 Q2SM-2225-15
10.0 +0.083 12.0 10.0 Q2SM-1012-10 22.0 25.0 20.0 Q2SM-2225-20
10.0 12.0 12.0 Q2SM-1012-12 22.0 25.0 25.0 Q2SM-2225-25
10.0 12.0 15.0 Q2SM-1012-15 22.0 25.0 30.0 Q2SM-2225-30
10.0 12.0 20.0 Q2SM-1012-20 24.0 27.0 15.0 Q2SM-2427-15
12.0 14.0 10.0 Q2SM-1214-10 24.0 27.0 20.0 Q2SM-2427-20
+0.040
12.0 14.0 12.0 Q2SM-1214-12 24.0 27.0 25.0 Q2SM-2427-25
+0.124
12.0 14.0 15.0 Q2SM-1214-15 24.0 27.0 30.0 Q2SM-2427-30
12.0 14.0 20.0 Q2SM-1214-20 25.0 28.0 15.0 Q2SM-2528-15
13.0 15.0 10.0 Q2SM-1315-10 25.0 28.0 20.0 Q2SM-2528-20
13.0 15.0 20.0 Q2SM-1315-20 25.0 28.0 25.0 Q2SM-2528-25
+0.032
14.0 16.0 15.0 Q2SM-1416-15 25.0 28.0 20.0 Q2SM-2528-20
+0.102 Couldn't find your size?
14.0 16.0 20.0 Q2SM-1416-20 25.0 28.0 25.0 Q2SM-2528-25
14.0 16.0 25.0 Q2SM-1416-25 25.0 28.0 30.0 Q2SM-2528-30 Do you need another length, other dimensions or tolerances? You need a particular design or alternative for your
15.0 17.0 15.0 Q2SM-1517-15 28.0 32.0 30.0 Q2SM-2832-30 application? Please call us. igus® listens to your needs and provides you a solution very quickly.
15.0 17.0 20.0 Q2SM-1517-20 30.0 34.0 20.0 Q2SM-3034-20
15.0 17.0 25.0 Q2SM-1517-25 30.0 34.0 25.0 Q2SM-3034-25 Even more dimensions from stock
16.0 18.0 15.0 Q2SM-1618-15 30.0 34.0 30.0 Q2SM-3034-30 More than 300 dimensions are now available. Search online for your required bearing.
www.igus.eu/iglidur-specialbearings
3)
After press-fit. Testing methods Page 57
420 Online tools and more information www.igus.eu/q2 3D-CAD files, prices and delivery time online www.igus.eu/q2 421
Q2FM iglidur® Q2 | Product range
Flange bearing (Form F)
.5
.0
ax Order key
f1
30
m
r
°
Type Dimensions [mm]
d2
d3
d1
b2
iglidur® material
b1
Outer-Ø d2
Inner-Ø d1
Length b1
Form F
Metric
2)
Thickness < 1 mm: chamfer = 20°
Dimensions [mm]
d1 d1- d2 d3 b1 b2 Part No. d1 d1- d2 d3 b1 b2 Part No.
Tolerance3) d13 h13 –0.14 Tolerance3) d13 h13 –0.14
5.0 7.0 11.0 5.0 1.0 Q2FM-0507-05 18.0 +0.032 20.0 26.0 17.0 1.0 Q2FM-1820-17
6.0 +0.020 8.0 12.0 4.0 1.0 Q2FM-0608-04 18.0 +0.102 20.0 26.0 22.0 1.0 Q2FM-1820-22
6.0 +0.068 8.0 12.0 6.0 1.0 Q2FM-0608-06 20.0 23.0 30.0 12.0 1.5 Q2FM-2023-12
6.0 8.0 12.0 8.0 1.0 Q2FM-0608-08 20.0 23.0 30.0 11.5 1.5 Q2FM-2023-11
8.0 10.0 15.0 3.0 1.0 Q2FM-0810-03 20.0 23.0 30.0 16.5 1.5 Q2FM-2023-16
8.0 10.0 15.0 5.5 1.0 Q2FM-0810-05 20.0 23.0 30.0 21.5 1.5 Q2FM-2023-21
8.0 10.0 15.0 7.5 1.0 Q2FM-0810-07 25.0 28.0 35.0 11.5 1.5 Q2FM-2528-11
+0.040
8.0 10.0 15.0 9.5 1.0 Q2FM-0810-09 25.0 28.0 35.0 16.5 1.5 Q2FM-2528-16
+0.124
Load [MPa]
constant for the most part under weathering effects.
●● Construction machinery industry
●● Sheet metal industry
Available from stock 0.1 Medium Resistance
●● Agricultural machines 0.001 0.01 0.1 1.0 10.0
Detailed information about delivery time online. Alcohol + to 0
●● Railway technology Surface speed [m/s]
●● Doors and gates Diagram 01: Permissible pv values for iglidur® Q bearings Hydrocarbons +
Block pricing online Greases, oils without additives +
with a wall thickness of 1 mm dry running against a steel
No minimum order value. From batch size 1. Fuels +
shaft, at +20 °C, mounted in a steel housing
Diluted acids 0 to –
Max. +135°C Strong acids –
Min. –40 °C Moisture absorption Diluted alkalines +
The moisture absorption of iglidur® Q plain bearings is Strong alkalines 0
Ø 6–90 mm approximately 0.9 % weight in standard climatic conditions.
+ resistant 0 conditionally resistant – not resistant
More dimensions upon request The saturation limit in water is 4.9 % weight. This must be
All data given at room temperature [+20 °C]
taken into account for these types of applications.
Table 02: Chemical resistance
Imperial dimensions available
Diagram, www.igus.eu/q-moisture
From page 1391
Chemical table, page 1478
Vacuum
Online product finder iglidur® Q plain bearings outgas in a vacuum. Therefore,
www.igus.eu/iglidur-finder only dehumidified bearings are suitable in vacuum.
424 Online tools and more information www.igus.eu/q 3D-CAD files, prices and delivery time online www.igus.eu/q 425
Q Q
+135 °C iglidur Q | Technical data
®
iglidur Q | Technical data ® +135 °C
100 MPa 100 MPa
0.4 200
iglidur® Q bearings were developed especially for extreme Permissible surface speeds 180
loads. Under high loads, iglidur® Q figures among the iglidur® Under extreme radial loads, the iglidur® Q bearings can 160 rotating oscillating
0.3
materials that display the best wear resistance. From a radial reach the maximum pv values, which are possible in the
Wear [µm/km]
solid lubricants, precisely integrated into the material, ensure low speeds, high surface speeds are also attainable due 60
0.1 40
that the maintenance-free dry operation is guaranteed under to the excellent coefficients of friction. The values stated in
20
any load. table 03 show the speed at which the temperature rises to
0.0 0
the maximum permitted value as a result of friction. 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 10 20 30 40 50 60 70 80 90 100
Mechanical properties Load [MPa] Load [MPa]
Surface speed, page 44
With increasing temperatures, the compressive strength Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
of iglidur® Q plain bearings decreases. The diagram 02 m/s Rotating Oscillating Linear pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
shows this inverse relationship. The recommended maxi- Continuous 1 0.7 5 steel, as a function of the pressure
mum surface pressure is a mechanical material parameter. Short-term 2 1.4 6
No conclusions regarding the tribological properties can be
Table 03: Maximum surface speeds Shaft materials Installation tolerances
drawn from this.
Diagram 06 displays a summary of the results of tests with iglidur® Q plain bearings are standard bearings for shafts
120 Temperatures different shaft materials conducted with bearings made from with h-tolerance (recommended minimum h9).
100
Plain bearings made from iglidur® Q have excellent wear iglidur® Q. After being assembled into a nominal size housing, the inner
resistance even at high temperatures. At temperatures over The strengths offered by iglidur® heavy-duty materials diameter automatically adjusts to the E10 tolerances. For
80
+50 °C an additional securing is required. Also, notice that become clear from 30 MPa. iglidur® Q stands out in parti- specific dimensions the tolerance differs depending on the
60 the coefficient of friction increases rapidly as temperature cular. Other heavy-duty materials such as iglidur® Q2 and wall thickness (please see the product range table).
40
increases from around +100 °C. TX1 only offer the best performances in terms of wear when
Load [MPa]
subjected to even higher loads. iglidur® Q offers strikingly Testing methods, page 57
20 Application temperatures, page 49
good wear properties on many different shaft materials.
Additional securing, page 49
0 Diameter Shaft iglidur® Q Housing
20 40 60 80 100 120 135 Shaft materials, page 52
Temperature [°C] Friction and wear d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Diagram 02: Permissible maximum surface pressure of Although most dry running plastic bearings feature up to 3 0–0.025 +0.014 +0.054 0 +0.010
iglidur® Q Dry Greases Oil Water
as a function of temperature (100 MPa at +20 °C) decreasing coefficients of friction with increasing pressure, > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
C. o. f. µ 0.05–0.15 0.09 0.04 0.04
iglidur® Q goes further than most, under high pressures the > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Table 04: Coefficient of friction against steel (Ra = 1µm, > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
iglidur® Q is a material used when high pv values are reached material gives excellent low values (diagrams 04 and 05).
50 HRC) > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
with high loads. Diagram 03 shows the elastic deformation
Coefficients of friction and surfaces, page 47 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
of iglidur® Q at radial loads. At the recommended maximum
Wear resistance, page 50 60 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
surface pressure of 100 MPa the deformation is less than
20MnV6, unhardened,
40
hard chrome-plated
hard-chrome plated
Table 05: Important tolerances for plain bearings
St52 galvanised
7 0.4 according to ISO 3547-1 after pressfit
Wear [µm/km] 20
6
+23 °C +60 °C 0.3 10
5
St52
C45
Coefficient of friction [µ]
4 0
0.2
Diagram 06: Wear, pivoting with different shaft materials,
Deformation [%]
0 0.0
0 25 50 75 100 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
426 Online tools and more information www.igus.eu/q 3D-CAD files, prices and delivery time online www.igus.eu/q 427
QSM iglidur® Q | Product range iglidur® Q | Product range QFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
iglidur® material
iglidur® material
b1 b2
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
Chamfer in relation to the d1 Dimensions according to ISO 3547-1 Chamfer in relation to the d1 Dimensions according to ISO 3547-1
d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions d1 [mm]: Ø 1–6 Ø 6–12 Ø 12–30 Ø > 30 and special dimensions
f [mm]: 0.3 0.5 0.8 1.2 f [mm]: 0.3 0.5 0.8 1.2
Imperial dimensions available Imperial dimensions available
From page 1417 From page 1439
428 Online tools and more information www.igus.eu/q 3D-CAD files, prices and delivery time online www.igus.eu/q 429
QTM iglidur® Q | Product range
Thrust Washer (Form T)
d1
Order key
s
d2
d5
d4
Thickness s [mm]
Outer-Ø d2 [mm]
Inner-Ø d1 [mm]
iglidur® material
d6
Form T
Metric
Dimensions according to ISO 3547-1
and special dimensions
Dimensions [mm]
d1 d2 s d4 d5 h d6 Part No.
+0.3 –0.3 –0.06 –0.12/+0.12 –0.375/+0.125 +0.2/–0.2 +0.12
28.0 42.0 1.5 35.0 4.0 1.0 42.0 QTM-2842-015
32.0 54.0 1.5 43.0 4.0 1.0 54.0 QTM-3254-015
Load [MPa]
and other weathering effects.
iglidur® Z, page 255
0.1 Medium Resistance
Typical application areas 0.001 0.01 0.1 1.0 10.0
●● Agricultural machines Surface speed [m/s]
Alcohol + to 0
●● Utility and construction vehicles Diagram 01: Permissible pv values for iglidur® Q290 Hydrocarbons +
Available from stock Greases, oils without additives +
bearings running against a steel shaft, at +20 °C, moun
Detailed information about delivery time online. Fuels +
ted in a steel housing
Diluted acids 0 to –
Block pricing online Strong acids –
No minimum order value. From batch size 1. Diluted alkalines +
Moisture absorption
Under standard climatic conditions, the moisture absorption Strong alkalines + to 0
Max. +140 °C
of iglidur ® Q290 plain bearings is 3.0 % weight. The + resistant 0 conditionally resistant – not resistant
Min. –40 °C
saturation limit in water is 9.3 % weight. All data given at room temperature [+20 °C]
Table 02: Chemical resistance
Ø 20–80 mm
Vacuum
More dimensions upon request
In a vacuum, any moisture content will outgas. Use in Chemical table, page 1478
vacuum is only possible to a limited extent.
Online product finder
www.igus.eu/iglidur-finder
432 Online tools and more information www.igus.eu/q290 3D-CAD files, prices and delivery time online www.igus.eu/q290 433
Q290 Q290
+140 °C iglidur Q290 | Technical data
®
iglidur Q290 | Technical data ® +140 °C
55 MPa 55 MPa
0.20 240
iglidur® Q290 bearings do not have the highest static load Permissible surface speeds
capacity within the iglidur® product range, instead the Typical applications for iglidur® Q290 bearings include mid 200
0.15 rotating
material shows its strengths at moderate to high dynamic to high-load pivoting movements at comparatively slow
Wear [µm/km]
especially on "soft" shafts, for both the shafts and bearings! bearing loads. They do not provide any indication of the 80
0.05
wear resistance under these parameters. 40
Mechanical properties
Surface speed, page 44 0.00 0
With increasing temperatures, the compressive strength of 1 10 25 40 55 0 5 15 25 35 45 55
iglidur® Q290 plain bearings decreases. The diagram 02 m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
shows this inverse relationship. With the short-term per- Continuous 0.8 0.6 1.0 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applications
mitted application temperature of +180 °C, the permitted Short-term 2.0 1.4 2.0 pressure, v = 0.01 m/s against Cf53 with shaft material Cf53 hardened and ground steel, as
surface pressure is still more than 10 MPa. The recommended a function of the pressure
Table 03: Maximum surface speeds
maximum surface pressure is a mechanical material requi- Failed *
2,000
rement. No conclusions regarding the tribological properties
1,750
can be drawn from this. Temperatures Shaft materials
1,500
The maximum long-term application temperature of +140 °C Generally, the use of hardened shafts is recommended
20 pivoting applications is shown in diagram 07. Diagram 08: Wear, pivoting applications on galvanised
Additional securing, page 49
10 shafts, p > 50 MPa, v = 0.01 m/s
0 Shaft materials, page 52 * Shaft St52 galvanised. Cycle frequency 60.000. Tested with bearing
diameter 20 mm and 20 mm length. The force in the test was 30,400 N
20 40 60 80 100 120 140 Friction and wear
Temperature [°C]
Please note that a sliding surface with a rough surface iglidur® Q290 Dry Greases Oil Water Installation tolerances
Diagram 02: Permissible maximum surface pressure of
finish will increase the friction. The coefficient of friction of C. o. f. µ 0.15–0.23 0.09 0.04 0.04 iglidur® Q290 plain bearings are standard bearings for shafts
as a function of temperature (55 MPa at +20 °C)
iglidur® Q290 increases as the speed increases (Diagram with h-tolerance (recommended minimum h9). The bearings
Table 04: Coefficient of friction against steel (Ra = 1µm,
04). In contrast, the coefficient of friction drops continually are designed for press-fit into a housing machined to a
Diagram 03 shows the elastic deformation of iglidur Q290 ®
50 HRC)
with the radial load, as illustrated by Diagram 05. H7 tolerance. After being assembled into a nominal size
at radial loads. These high elastic deformation values, even
housing, in standard cases the inner diameter automatically
for loads of more than 50 MPa, contribute significantly to the Coefficients of friction and surfaces, page 47
16.0 adjusts to the E10 tolerances. For specific dimensions the
long service life under rugged environmental conditions such Wear resistance, page 50
14.0 tolerance differs depending on the wall thickness (please
as edge loads, collisions and impacts.
12.0 see the product range table).
HR carbon steel
H.a. aluminium
25 6.0
Wear [µm/km]
Diameter Shaft iglidur® Q290 Housing
0.40
4.0 d1 [mm] h9 [mm] E10 [mm] H7 [mm]
304 SS
Coefficient of friction [µ]
20
Cf53
0.30 2.0 up to 3 0–0.025 +0.014 +0.054 0 +0.010
+23 °C +60 °C
15 0.0 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
0.20 Diagram 06: Wear, rotating with different shaft materials, > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Deformation [%]
434 Online tools and more information www.igus.eu/q290 3D-CAD files, prices and delivery time online www.igus.eu/q290 435
Q290SM iglidur® Q290 | Product range
Sleeve bearing (Form S)
f1
Order key
30°
Type Dimensions [mm]
d1
d2
0.5
30°
b1
iglidur® material
Outer-Ø d2
Inner-Ø d1
Length b1
Form S
Metric
2)
Thickness < 1 mm: chamfer = 20°
Dimensions [mm]
d1 d1-Tolerance3) d2 b1 Part No.
±0.25
20.0 +0.040 +0.124 23.0 20.0 Q290SM-2023-20
25.0 +0.040 +0.124 28.0 30.0 Q290SM-2528-30
30.0 +0.040 +0.124 34.0 30.0 Q290SM-3034-30
30.0 +0.040 +0.124 34.0 40.0 Q290SM-3034-40
35.0 +0.050 +0.150 39.0 30.0 Q290SM-3539-30
35.0 +0.050 +0.150 39.0 40.0 Q290SM-3539-40
35.0 +0.050 +0.150 39.0 50.0 Q290SM-3539-50
40.0 +0.050 +0.150 44.0 40.0 Q290SM-4044-40
Load [MPa]
1.0
●● For high-temperature applications with radiation.
average load levels
0.1
iglidur® X, page 245 0.001 0.01 0.1 1.0 10.0 Medium Resistance
iglidur® J350, page 173 Surface speed [m/s] Alcohols 0
iglidur® H, page 313 Diagram 01: Permissible pv values for iglidur® TX1 Hydrocarbons +
Available from stock
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Detailed information about delivery time online.
Typical application areas a steel shaft, at +20 °C, mounted in a steel housing Fuels +
●● Agricultural machines Diluted acids +
Block pricing online
●● Construction machinery and commercial Strong acids –
No minimum order value. From batch size 1. Moisture absorption
vehicles Diluted alkalines +
Under standard climatic conditions, the moisture absorption
●● Heavy equipments Strong alkalines –
Max. +120 °C of iglidur® TX1 plain bearings is 0.2 % weight. The saturation
Min. –60 °C limit in water is 0.5 % weight. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Ø 20–80 mm Vacuum Table 02: Chemical resistance
More dimensions upon request In a vacuum, any moisture content will outgas. Applications
under vacuum conditions are possible to a limited extent. Chemical table, page 1478
Online product finder
www.igus.eu/iglidur-finder
438 Online tools and more information www.igus.eu/tx1 3D-CAD files, prices and delivery time online www.igus.eu/tx1 439
TX1 TX1
+120 °C iglidur TX1 | Technical data
®
iglidur TX1 | Technical data ® +120 °C
200 MPa 200 MPa
0.50 40
iglidur® TX1 bearings represent excellent load bearing Permissible surface speeds
capacity under high radial loads coupled with good abrasion The typical applications for iglidur® TX1 plain bearings are 0.40
30
resistance. The special design not only ensures excellent high load pivoting motions at comparatively low speeds.
HR carbon steel
allows lubrication and maintenance-free operation thanks The speeds shown in table 03 are threshold values for low
Cromax 482H
Cromax 280X
0.20
Wear [µm/km]
to solid lubricants. High dirt and media resistance round bearing loads. They do not provide any indication of the
10
304 SS
off the list of properties. wear resistance under these parameters. 0.10
Cf53
0.00 0
Mechanical properties Surface speed, page 44 0.0 0.1 0.2 0.3 0.4 Diagram 06: Wear, rotating with different shaft materials,
With increasing temperatures, the compressive strength Surface speed [m/s]
p = 76 MPa, v = 0.01 m/s
of iglidur® TX1 plain bearings decreases. The diagram 02 m/s Rotating Oscillating Linear Diagram 04: Coefficient of friction as a function of the
shows this inverse relationship. At the short-term permit- Continuous 0.4 0.2 1.0 surface speed, p = 1 MPa
50
ted application temperature of +170 °C, the permitted sur- Short-term 0.9 0.5 2.0
face pressure is still 100 MPa. The permissible maximum 40
Table 03: Maximum surface speeds 0.40
surface pressure is a mechanical material parameter. No
0.35 30
conclusions regarding the tribological properties can be
0.30
drawn from this.
Wear [µm/km]
iglidur® TX1 is a very temperature resistant material. The 0.20
200 10
long-term upper temperature limit of +120 °C permits the 0.15
175 rotating oscillating
broad use in applications typical for the agricultural, utility 0.10 0
150 0 20 40 60 80 100 120 140
vehicle or construction equipment sectors. The press-in 0.05
125 Load [MPa]
and press-out forces of iglidur® TX1 bearings are extremely 0.00
100 0 10 20 30 40 50 60 70 Diagram 07: Wear for oscillating and rotating applications
high over the entire temperature range. As a result, additi-
75 Load [MPa] with shaft material Cf53 hardened and ground steel, as a
onal axial securing is generally unnecessary. Although the
Load [MPa]
440 Online tools and more information www.igus.eu/tx1 3D-CAD files, prices and delivery time online www.igus.eu/tx1 441
TX1SM iglidur® TX1 | Product range My sketches iglidur®
TX1
Sleeve bearing (Form S)
Order key
15
0,5
°
Type Dimensions [mm]
d2
d1
iglidur® material
b1
Outer-Ø d2
Inner-Ø d1
Length b1
Form S
Metric
Dimensions [mm]
d1 d1-Tolerance38) d2 b1 Part No.
±0.25
20.0 +0.020 +0.150 25.0 20.0 TX1SM-2025-20
20.0 +0.020 +0.150 25.0 30.0 TX1SM-2025-30
20.0 +0.020 +0.150 25.0 40.0 TX1SM-2025-40
20.0 +0.020 +0.150 30.0 30.0 TX1SM-2030-30
25.0 +0.020 +0.150 30.0 20.0 TX1SM-2530-20
25.0 +0.020 +0.150 30.0 30.0 TX1SM-2530-30
25.0 +0.020 +0.150 30.0 40.0 TX1SM-2530-40
30.0 +0.020 +0.150 35.0 30.0 TX1SM-3035-30
30.0 +0.020 +0.150 35.0 40.0 TX1SM-3035-40
30.0 +0.020 +0.150 40.0 40.0 TX1SM-3040-40
40.0 +0.020 +0.150 45.0 40.0 TX1SM-4045-40
40.0 +0.025 +0.175 50.0 50.0 TX1SM-4050-50
50.0 +0.025 +0.175 55.0 50.0 TX1SM-5055-50
50.0 +0.025 +0.175 60.0 60.0 TX1SM-5060-60
60.0 +0.025 +0.175 65.0 60.0 TX1SM-6065-60
60.0 +0.025 +0.175 70.0 80.0 TX1SM-6070-80
70.0 +0.025 +0.175 75.0 60.0 TX1SM-7075-60
70.0 +0.050 +0.200 80.0 100.0 TX1SM-7080-100
80.0 +0.050 +0.200 85.0 100.0 TX1SM-8085-100
80.0 +0.050 +0.200 90.0 100.0 TX1SM-8090-100
38)
After pressfit of the bearing in a housing with nominal dimension
Special applications
This group brings together the iglidur® materials Available from stock
Coefficient of friction
Temperature [°C] 123)
for very special cases. Those who have not yet Detailed information about delivery time online.
Price index
[MPa] 124)
or fast rotation under water: One iglidur® material No minimum order value. From batch size 1.
[µ] 125)
for all requirements.
●● Lubrication and maintenance-free Ø 2–70 mm
●● Lightweight More dimensions upon request
iglidur® N54 – The biopolymer
●● Good price / performance ratio
Based on renewable resources
●● Predictable service life Online product finder
Page 481 80 36 0.14
www.igus.eu/iglidur-finder 0.20
Page 489
Coefficient of friction
Temperature [°C] 123)
iglidur® J2 – Versatile and cost-effective
Price index
lubrication
[MPa] 124)
46 0.18
90
[µ] 125)
Page 497
105
iglidur® F – Electrically conductive 0.37 iglidur® AB – The first antibacterial iglidur® bearing
140
Pressure resistant According to ISO 22 196:2011
0.18
Page 449 1.00 Page 505 25 1.00
70
iglidur® F2 – ESD-compatible all-rounder New iglidur® RW370 - Tested per DIN EN 45545 170
75
Electrically conductive 120 Wear-resistant for rail technology
47 0.16 1.53
Page 457 Page 513 0.13 1.15
200
iglidur® UW – For fast rotation under water iglidur® C – Free from PTFE and silicone
Extremely wear resistant in liquid at long-term operation 0.24 For simple applications 0.23
40 1.80 40 1.73
Page 473 90 Page 525 90
123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C; 123)
Max. long-term application temperature; 124) Max. permissible surface pressure at +20 °C;
125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating 125)
Best combination for p = 1MPa, v = 0.3 m/s, rotating
446 Online tools and more information www.igus.eu/iglidur 3D-CAD files, prices and delivery time online www.igus.eu/iglidur 447
Electrically conductive – iglidur F®
Electrically conductive
High compressive strength
Good temperature resistance
High pv value
Good chemical resistance
Lubrication and maintenance-free
Standard range from stock
448
F
iglidur®
F iglidur F | Electrically conductive
®
iglidur F | Technical data
® +140 °C
105 MPa
Pressure resistant
Material properties
Outstanding rigidity and hardness as well as high General properties Unit iglidur® F Testing method
conductivity: iglidur® F bearings can only be used Density g/cm3 1.25
High compressive in dry operations to a limited extent, but offer their Colour black
strength fully mechanical benefits when lubricated with oil Max. moisture absorption at +23 °C/50 % r.h. % weight 1.8 DIN 53495
and grease. Max. water absorption % weight 8.4
Coefficient of sliding friction, dynamic, against steel µ 0.1–0.39
pv value, max. (dry) MPa · m/s 0.34
Mechanical properties
Good temperature When to use it? Flexural modulus MPa 11,600 DIN 53457
resistance ●● When the bearing should be electrically Flexural strength at +20 °C MPa 260 DIN 53452
conductive Compressive strength MPa 98
●● For high static loads Max. recommended surface pressure (+20 °C) MPa 105
Shore-D hardness 84 DIN 53505
Physical and thermal properties
Max. long-term application temperature °C +140
High pv value Max. short-term application temperature °C +180
When not to use it?
●● When mechanical reaming of the wall surface Min. long-term application temperature °C –40
is necessary Heat conductivity W/m · K 0.65 ASTM C 177
iglidur® M250, page 95 Coefficient of thermal expansion (at +23 °C) K · 10
–1 –5
12 DIN 53752
●● When highest wear resistance is required Electrical properties5)
Good resistance iglidur® W300, page 153 Specific contact resistance Ωcm < 103 DIN IEC 93
to chemicals ●● When very low coefficients of friction when Surface resistance Ω < 10 2
DIN 53482
5)
The good conductivity of this plastic material under certain circumstances can favour the generation of corrosion on the metallic contact components.
running dry are needed
iglidur® J, page 141 Table 01: Material properties table
●● For underwater applications 1,000.0
Radiation resistance
iglidur® H370, page 305
Plain bearings made from iglidur® F are resistant to radiation
●● When you need an universal bearing 100.0
up to an intensity of 3 · 102 Gy.
iglidur® G, page 79
10.0
UV resistance
Typical application areas
iglidur® F plain bearings are permanently resistant to UV
Load [MPa]
●● Textile industry 1.0
radiation.
●● Automotive industry
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol + to 0
Available from stock Diagram 01: Permissible pv values for iglidur® F bearings Hydrocarbons +
Detailed information about delivery time online. with a wall thickness of 1 mm dry running against a Greases, oils without additives +
steel shaft, at +20 °C, mounted in a steel housing Fuels +
Block pricing online Diluted acids 0 to –
No minimum order value. From batch size 1. Moisture absorption Strong acids –
The humidity absorption of iglidur® F bearings amounts to Diluted alkalines +
Max. +140 °C about 1.8 % weight in standard climatic conditions. The Strong alkalines + to 0
Min. –40 °C saturation limit in water is 8.4 % weight. This must be taken
+ resistant 0 conditionally resistant – not resistant
into account along with other environmental influences.
All data given at room temperature [+20 °C]
Ø 2–70 mm
Diagram, www.igus.eu/f-moisture Table 02: Chemical resistance
More dimensions upon request
Vacuum Chemical table, page 1478
Online product finder iglidur® F plain bearings outgas in a vacuum. Use in vacuum
www.igus.eu/iglidur-finder is only possible with dehumidified bearings.
450 Online tools and more information www.igus.eu/f 3D-CAD files, prices and delivery time online www.igus.eu/f 451
F F
+140 °C iglidur F | Technical data
®
iglidur F | Technical data ® +140 °C
105 MPa 105 MPa
10 0.6 12
When bearings need to be electrically conductive, especially
in applications that should keep out static, the iglidur® F 8 10
HR carbon steel
H.a. aluminium
could be statically loaded up to 105 MPa.
Deformation [%]
4
Wear [µm/km]
0.4 4
Mechanical properties
304 SS
2 2
Cf53
With increasing temperatures, the compressive strength
0 0.3 0
of iglidur® F plain bearings decreases. The diagram 02 0 15 30 45 60 75 90 105 0.05 0.10 0.15 0.20 0.25 0.30 0.35 Diagram 06: Wear, rotating with different shaft materials,
shows this inverse relationship. However, at the long-term Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
maximum temperature of +140 °C the permissible surface Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
pressure is almost 50 MPa. The permissible maximum surface speed, p = 0.75 MPa 40
surface pressure is a mechanical material parameter. No
conclusions regarding the tribological properties can be Permissible surface speeds 30
0.5
drawn from this. The maximum permitted surface speeds are based on
the operation period and the type of motion. A bearing is 0.4 20
160 the most stressed in long-term rotating motions. Here the
Wear [µm/km]
Coefficient of friction [µ]
0.3
140 maximum speed for the iglidur® F bearing is 0.8 m/s. The 10
120 maximum values specified in table 03 are attained only at 0.2
100 minimum pressure loads. In practice these limit values are 0
80 not often attained due to interactions. 0.1 Cf53 hard 304 SS HR carbon
chromed steel
60
Surface speed, page 44 0.0 rotating oscillating
Load [MPa]
40
0 10 20 30 40 50 60 70 80 Diagram 07: Wear for rotating and oscillating applica
20 m/s Rotating Oscillating Linear Load [MPa]
tions with different shaft materials, p = 2 MPa
0 Continuous 0.8 0.6 3
20 50 80 120 140 Diagram 05: Coefficient of friction as a function of the
Temperature [°C]
Short-term 1.5 1.1 6 pressure, v = 0.01 m/s
Diagram 02: Permissible maximum surface pressure of Table 03: Maximum surface speeds
as a function of temperature (105 MPa at +20 °C)
Shaft materials Installation tolerances
Temperatures Diagrams 06 and 07 display a summary of the results of iglidur® F plain bearings are standard bearings for shafts
Diagram 03 shows the elastic deformation of iglidur® F at The ambient temperatures strongly influence the features tests with different shaft materials conducted with bearings with h-tolerance (recommended minimum h9). After being
radial loads. At the permissible maximum surface pressure of bearings. With increasing temperatures, the compressive made from iglidur® F. In the lowest load range, the hard- assembled into a nominal size housing, in standard cases the
of 105 MPa the deformation at room temperature is less strength of iglidur® F plain bearings decreases. The wear chromed shafts prove to be the most suitable in rotating inner diameter automatically adjusts to the D11 tolerances.
than 3.0 %. also increases. At temperatures over +105 °C an additional applications with iglidur® F bearings. For particular dimensions the tolerance differs depending on
A plastic deformation can be negligible up to this pressure securing is required. the wall thickness (please see product range table).
load. However, it is also dependent on the service time. Shaft materials, page 52
Application temperatures, page 49
Testing methods, page 57
Additional securing, page 49 iglidur® F Dry Greases Oil Water
Surface pressure, page 41
C. o. f. µ 0.1–0.39 0.09 0.04 0.04 Diameter Shaft iglidur® F Housing
Friction and wear Table 04: Coefficient of friction against steel (Ra = 1µm, d1 [mm] h9 [mm] D11 [mm] H7 [mm]
In dry operation, the coefficients of friction of iglidur® F 50 HRC) up to 3 0–0.025 +0.020 +0.080 0 +0.010
bearings are not as favourable as those of many other > 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
iglidur ® materials. However iglidur® bearings can be > 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
lubricated without any problems, and iglidur® F bearings > 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
attain excellent results among the lubricated iglidur ® > 18 to 30 0–0.052 +0.065 +0.195 0 +0.021
bearings. > 30 to 50 0–0.062 +0.080 +0.240 0 +0.025
> 50 to 80 0–0.074 +0.100 +0.290 0 +0.030
Coefficients of friction and surfaces, page 47
Table 05: Important tolerances for plain bearings
Wear resistance, page 50
according to ISO 3547-1 after pressfit
452 Online tools and more information www.igus.eu/f 3D-CAD files, prices and delivery time online www.igus.eu/f 453
FSM iglidur® F | Product range iglidur® F | Product range FFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
454 Online tools and more information www.igus.eu/f 3D-CAD files, prices and delivery time online www.igus.eu/f 455
iglidur®
F My sketches
ESD-compatible all-rounder –
iglidur F2 ®
Load [MPa]
●● Jig construction radiation.
●● Industrial handling
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol +
Diagram 01: Permissible pv values for iglidur® F2 bearings Hydrocarbons –
Available from stock
with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
Detailed information about delivery time online.
shaft, at +20 °C, mounted in a steel housing Fuels +
Block pricing online Diluted acids 0
No minimum order value. From batch size 1. Moisture absorption Strong acids –
The moisture absorption of iglidur® F2 plain bearings is Diluted alkalines –
Max. +120 °C approximately 0.2 % weight in standard climatic conditions. Strong alkalines –
Min. –40 °C The saturation limit in water is 0.4 % weight. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Diagram, www.igus.eu/f2-moisture
Ø 5–20 mm Table 02: Chemical resistance
More dimensions upon request Vacuum
iglidur® F2 plain bearings outgas in a vacuum. Use in Chemical table, page 1478
Online product finder vacuum is only possible with dehumidified bearings.
www.igus.eu/iglidur-finder
458 Online tools and more information www.igus.eu/f2 3D-CAD files, prices and delivery time online www.igus.eu/f2 459
F2 F2
+120 °C iglidur F2 | Technical data
®
iglidur F2 | Technical data ® +120 °C
47 MPa 47 MPa
0.5 500
The prevention of electrostatic charge is an important Permissible surface speeds
rotating oscillating
requirement in many application areas. At the same time The maximum permitted surface speeds are based on 0.4 400
other technical application parameters such as wear the operation period and the type of motion. A bearing is
Wear [µm/km]
its wide range of properties constitutes another universal maximum values specified in table 03 are not often attained
bearing for numerous "ESD-compatible" applications. in practice. 0.1 100
0.0 0
Mechanical properties Surface speed, page 44 0 10 20 30 40 50 5 10 20 30 40
With increasing temperatures, the compressive strength Load [MPa] Load [MPa]
of iglidur® F2 bearings decreases. The diagram 02 shows m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
this inverse relationship. The permissible maximum sur- Continuous 0.8 0.7 3 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
face pressure is a mechanical material parameter. No con Short-term 1.4 1.1 5 steel, as a function of the pressure
clusions regarding the tribological properties can be drawn
Table 03: Maximum surface speeds
from this.
Shaft materials Installation tolerances
70 Diagram 06 shows results of testing different shaft materials iglidur® H2 bearings are standard bearings for shafts with
Temperatures
60 with plain bearings made from iglidur® F2. h-tolerance (recommended minimum h9). The bearings
The ambient temperatures strongly influence the features
50
In the lower region of the load, cutting steel and hard are designed for pressfit into a housing machined to a H7
of bearings. With increasing temperatures, the compressive
anodised aluminium shafts, as well as HR carbon steel and tolerance.
40 strength of iglidur® F2 bearings decreases. The diagram
hard-chromed steel shafts prove to be the most favourable After being assembled into a nominal size housing, the
30 02 shows this inverse relationship. At temperatures over
in rotating applications with iglidur® F2 plain bearings with inner diameter automatically adjusts to the E10 tolerances.
+70 °C an additional securing is required.
Load [MPa]
20
respect to wear.
10 Diagram 07 shows a significantly less wear in rotation Testing methods, page 57
Application temperatures, page 49
0 compared to pivoting movements over the entire load
20 40 60 80 100 120 Additional securing, page 49
range. Diameter Shaft iglidur® F2 Housing
Temperature [°C]
Diagram 02: Permissible maximum surface pressure of d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
as a function of temperature (47 MPa at +20 °C) Friction and wear
Coefficient of friction and wear resistance alter with the > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Diagram 03 shows the elastic deformation of iglidur® F2 at application parameters (diagrams 04 and 05). iglidur F2 ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
radial loads. A plastic deformation can be negligible up to C. o. f. µ 0.16–0.22 0.1 0.05 0.03 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
this value. However, it is also dependent on the service time. Coefficients of friction and surfaces, page 47 Table 04: Coefficient of friction against steel (Ra = 1µm, > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Wear resistance, page 50 50 HRC) > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Surface pressure, page 41 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
12
> 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
> 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
10
7 0.6 Table 05: Important tolerances for plain bearings
HR carbon steel
5
H.a. aluminium
Coefficient of friction [µ]
0.4
Wear [µm/km]
4 4
0.3
304 SS
Deformation [%]
3 2
Cf53
0.2
2
0
1 0.1
Diagram 06: Wear, rotating with different shaft materials,
0 0.0 p = 1 MPa, v = 0.3 m/s
0 15 30 45 0.1 0.2 0.3 0.4 0.5 0.6 0.7
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1.0 MPa
460 Online tools and more information www.igus.eu/f2 3D-CAD files, prices and delivery time online www.igus.eu/f2 461
F2SM iglidur® F2 | Product range iglidur® F2 | Product range F2FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
462 Online tools and more information www.igus.eu/f2 3D-CAD files, prices and delivery time online www.igus.eu/f2 463
iglidur®
F2 My sketches
Load [MPa]
radiation and other climatic influences.
466 Online tools and more information www.igus.eu/h4 3D-CAD files, prices and delivery time online www.igus.eu/h4 467
H4 H4
+200 °C iglidur H4 | Technical data
®
iglidur H4 | Technical data ® +200 °C
65 MPa 65 MPa
0.7 200
iglidur® H4 bearings stand for high carrying capacity, good Permissible surface speeds 180
0.6
abrasion resistance and good temperature resistance, In contrast to the similarly cost-effective iglidur® H2 bea- 160 rotating
0.5 oscillating
besides the obvious economic factors. Temperatures up rings, the iglidur® H4 has an essentially favourable coef- 140
Wear [µm/km]
attributes. Solid lubricants lower the coefficient of friction The speeds stated in table 03 are limit values for the lowe- 0.2 60
and support the wear resistance, which was considerably st bearing loads. With higher loads, the permitted speed 40
0.1
20
improved compared to the likewise cost-effective iglidur® H2 drops with the extent of the load due to the limitations by
0.0 0
bearings. iglidur® H4 bearings are self-lubricating and sui- the pv value. 0 10 20 30 40 50 60 70 80 0 10 20 30 40 50
table for all motions. Load [MPa] Load [MPa]
Surface speed, page 44
Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
Mechanical properties m/s Rotating Oscillating Linear pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
With increasing temperatures, the compressive strength Continuous 1 0.7 1 steel, as a function of the pressure
of iglidur® H4 plain bearings decreases. The diagram 02 Short-term 1.5 1.1 2
shows this inverse relationship. The permissible maximum
Table 03: Maximum surface speeds
surface pressure is a mechanical material parameter. No con
Shaft materials Installation tolerances
clusions regarding the tribological properties can be drawn
Temperatures With many of the suitable shaft materials, the iglidur® H4 is iglidur® H4 bearings are standard bearings for shafts with
from this.
iglidur® H4 is a temperature resistant material and therefore the economical alternative to many other high-temperature h-tolerance (recommended minimum h9).
iglidur® H4 plain bearings can be used in applications where bearings. The important thing is however the selection of After being assembled into a nominal size housing, in
70
the bearings for instance undergo a drying process without the suitable shaft material. It cannot be generally stated that standard cases the inner diameter automatically adjusts to
60
further loading. The compressive strength of iglidur® H4, iglidur® H4 is suitable for use with hard or soft shafts. Tests the F10 tolerances. For particular dimensions the tolerance
50 however, decreases with increasing temperatures. The have however shown that pivoting applications yield bet- differs depending on the wall thickness (please see product
40 additional friction heat in the bearing system should be ter wear data. In rotating applications, the wear increases range table).
30 considered. At temperatures over +110 °C an additional markedly from 10 MPa.
securing is required. Testing methods, page 57
Load [MPa]
20
Shaft materials, page 52
10 Application temperatures, page 49
0 Additional securing, page 49 Diameter Shaft iglidur® H4 Housing
20 50 80 120 150 200 iglidur H4 ®
Dry Greases Oil Water d1 [mm] h9 [mm] F10 [mm] H7 [mm]
Temperature [°C] C. o. f. µ 0.08–0.25 0.09 0.04 0.04 up to 3 0–0.025 +0.006 +0.046 0 +0.010
Friction and wear
Diagram 02: Permissible maximum surface pressure of > 3 to 6 0–0.030 +0.010 +0.058 0 +0.012
The coefficient of friction of the iglidur® H4 bearing is very Table 04: Coefficient of friction against steel (Ra = 1µm,
as a function of temperature (65 MPa at +20 °C) > 6 to 10 0–0.036 +0.013 +0.071 0 +0.015
low (diagrams 04 and 05). However, it must be noted that 50 HRC)
an extremely coarse sliding surface can increase the friction. > 10 to 18 0–0.043 +0.016 +0.086 0 +0.018
Diagram 03 shows the elastic deformation of iglidur® H4 > 18 to 30 0–0.052 +0.020 +0.104 0 +0.021
10
at radial loads. Coefficients of friction and surfaces, page 47 9 > 30 to 50 0–0.062 +0.025 +0.125 0 +0.025
Wear resistance, page 50 8 > 50 to 80 0–0.074 +0.030 +0.150 0 +0.030
Surface pressure, page 41
7
HR carbon steel
H.a. aluminium
Wear [µm/km] 4
+23 °C +60 °C 0.4 3
Coefficient of friction [µ]
304 SS
2
Cf53
1
2.5 0.3
0
Deformation [%]
0.0 0.1
0 20 40 65 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
468 Online tools and more information www.igus.eu/h4 3D-CAD files, prices and delivery time online www.igus.eu/h4 469
H4SM iglidur® H4 | Product range iglidur® H4 | Product range H4FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
470 Online tools and more information www.igus.eu/h4 3D-CAD files, prices and delivery time online www.igus.eu/h4 471
iglidur®
H4 My sketches
6)
With respect to the use of the material in direct contact with water, it has to be pointed out that all results have been attained under laboratory conditions
iglidur® UW500, page 287 DW (fully demineralised water). We therefore recommend custom-designed tests under real application conditions.
iglidur® X, page 245 Table 01: Material properties table
●● When only dry operation is feasible
100.0
iglidur® J, page 141 Vacuum
Applications in vacuum are only p
ossible to a limited extent.
Typical application areas 10.0 Only dehumidified bearings should be tested in a vacuum.
●● Fluid technology
●● Pumps Medium Resistance
1.0
Alcohol +
Load [MPa]
Hydrocarbons +
0.1
Greases, oils without additives +
Available from stock 0.001 0.01 0.1 1.0 10.0 Fuels +
Surface speed [m/s] Diluted acids 0 to –
Detailed information about delivery time online.
Diagram 01: Permissible pv values for iglidur® UW bearings Strong acids –
with a wall thickness of 1 mm dry running against a steel Diluted alkalines +
Block pricing online
shaft, at +20 °C, mounted in a steel housing Strong alkalines + to 0
No minimum order value. From batch size 1.
+ resistant 0 conditionally resistant – not resistant
Moisture absorption
Max. +90 °C All data given at room temperature [+20 °C]
The humidity absorption of iglidur® UW bearings amounts
Min. –50 °C Table 02: Chemical resistance
to about 0.2 % weight in standard climatic conditions. The
saturation limit in water is 0.8 % weight. These values are Chemical table, page 1478
Ø 3–20 mm
so low that a moisture expansion need to be considered
More dimensions upon request
only in extreme cases.
474 Online tools and more information www.igus.eu/uw 3D-CAD files, prices and delivery time online www.igus.eu/uw 475
UW UW
+90 °C iglidur UW | Technical data
®
iglidur UW | Technical data ® +90 °C
40 MPa 40 MPa
7 0.5 8.0
Radiation resistance
6 7.0
Plain bearings of iglidur® UW are resistant to a radiation
+23 °C +60 °C 0.4 6.0
intensity of 3 · 102 Gy. 5
HR carbon steel
H.a. aluminium
UV resistance
Deformation [%]
3
3.0
Wear [µm/km]
iglidur® UW plain bearings are resistant to UV radiation. 2
0.2 2.0
304 SS
1
Cf53
1.0
iglidur® UW was developed for underwater applications in
0 0.1 0.0
which the maximum temperatures clearly lie below +100 °C. 0 15 30 40 0.05 0.10 0.15 0.20 0.25 0.30 Diagram 06: Wear, rotating with different shaft materials,
For application temperatures above this limit, the bearings Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
made from iglidur® UW500 ( page 287 ) are available. Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
Though iglidur® UW was developed for application in liquids, surface speed, p = 0.75 MPa 60
it is also suitable for dry operation. This one is particularly
50
important in applications that call for both dry and wet 0.7
Permissible surface speeds 40
operations. These applications can be seen often in prac 0.6
iglidur® UW is excellent in both dry and wet operations.
tice. The features of the bearings made from iglidur® UW 0.5
30
Through a hydrodynamic lubrication, attained under water
Wear [µm/km]
with high speeds, surface speeds far above 2 m/s can be 0.4 20
it is expressly mentioned otherwise.
achieved. In dry operation the iglidur® UW bearings can be 0.3 10
used anyhow up to 1.5 m/s on the short-term. 0.2
Mechanical properties 0
With increasing temperatures, the compressive strength Surface speed, page 44 0.1 Cf53 hard 304 SS HR carbon
chromed steel
of iglidur® UW plain bearings decreases. The diagram 02 0.0
m/s Rotating Oscillating Linear 0 10 20 30 40 rotating oscillating
shows this inverse relationship. The recommended maximum
Continuous 0.5 0.4 2 Load [MPa] Diagram 07: Wear for rotating and oscillating applica
surface pressure is a mechanical material parameter. No
Short-term 1.5 1.1 3 Diagram 05: Coefficient of friction as a function of the tions with different shaft materials, p = 2 MPa
conclusions regarding the tribological properties can be
pressure, v = 0.01 m/s
drawn from this. Table 03: Maximum surface speeds
10 increasing loads. It is also important to note that the wear thickness (please see product range table).
5 Application temperatures, page 49 rate increases significantly from loads > 5 MPa.
Testing methods, page 57
0 Additional securing, page 49
20 30 40 50 60 70 80 90 Shaft materials, page 52
Temperature [°C]
Diameter Shaft iglidur® UW Housing
Diagram 02: Permissible maximum surface pressure of Friction and wear d1 [mm] h9 [mm] E10 [mm] H7 [mm]
as a function of temperature (40 MPa at +20 °C) The surface of the shafts should not be extremely smooth iglidur® UW Dry Greases Oil Water up to 3 0–0.025 +0.014 +0.054 0 +0.010
in order to prevent a high adhesion effect and the related C. o. f. µ 0.15–0.35 0.09 0.04 0.04 > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
increase of the coefficient of friction. Please contact us for Table 04: Coefficient of friction against steel (Ra = 1µm, > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Diagram 03 shows the elastic deformation of iglidur® UW as > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
the specifications of shaft surface finishes in underwater 50 HRC)
a function of radial pressure. At the permissible maximum > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
applications.
surface pressure of 40 MPa the deformation is less than 1 %. > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
Coefficients of friction and surfaces, page 47 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
Surface pressure, page 41 Wear resistance, page 50 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
> 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
Table 05: Important tolerances for plain bearings
according to ISO 3547-1 after pressfit
476 Online tools and more information www.igus.eu/uw 3D-CAD files, prices and delivery time online www.igus.eu/uw 477
UWSM iglidur® UW | Product range iglidur® UW | Product range UWFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
478 Online tools and more information www.igus.eu/uw 3D-CAD files, prices and delivery time online www.igus.eu/uw 479
iglidur®
UW My sketches
1.0 UV resistance
Load [MPa]
iglidur® N54 bearings are resistant to UV radiation.
0.1
0.001 0.01 0.1 1.0 10.0 Medium Resistance
Surface speed [m/s] Alcohol + to 0
Diagram 01: Permissible pv values for iglidur® N54 Hydrocarbons +
Available from stock
bearings with a wall thickness of 1 mm dry running against Greases, oils without additives +
Detailed information about delivery time online.
a steel shaft, at +20 °C, mounted in a steel housing Fuels +
Block pricing online Diluted acids 0 to +
No minimum order value. From batch size 1. Moisture absorption Strong acids –
The moisture absorption of iglidur® N54 plain bearings is Diluted alkalines +
Max. +80 °C below 1.6 % weight in standard climatic conditions. The Strong alkalines 0
Min. –40 °C saturation limit in water is 3.6 % weight. + resistant 0 conditionally resistant – not resistant
All data given at room temperature [+20 °C]
Diagram, www.igus.eu/n54-moisture
Ø 6–20 mm Table 02: Chemical resistance
More dimensions upon request Vacuum
In a vacuum, any moisture content will outgas. Applications Chemical table, page 1478
Online product finder under vacuum conditions are possible to a limited extent.
www.igus.eu/iglidur-finder
482 Online tools and more information www.igus.eu/n54 3D-CAD files, prices and delivery time online www.igus.eu/n54 483
N54 N54
+80 °C iglidur N54 | Technical data
®
iglidur N54 | Technical data ® +80 °C
36 MPa 36 MPa
0.5 10
iglidur® N54 is the first iglidur® material based largely on bio- Permissible surface speeds 9
polymers. In addition to the proven lubrication-free proper- Even if the typical applications for iglidur® N54 plain bea- 8
0.4
ties of all iglidur® materials, this is one further contribution to rings are generally for intermittent service, depending on 7
HR carbon steel
H.a. aluminium
of friction in conjunction with long life ensure that this mate- quite high. The speeds stated in table 03 are limit values for 4
Wear [µm/km]
rial has a permanent place in the iglidur® product range. the lowest bearing loads. With higher loads, the permitted 3
0.2
304 SS
speed drops with the extent of the load due to the limitations 2
Cf53
1
Mechanical properties by the pv value.
0.1 0
With increasing temperatures, the compressive strength of 0.05 0.10 0.15 0.20 0.25 0.30 Diagram 06: Wear, rotating with different shaft materials,
iglidur® N54 bearings decreases. The diagram 02 shows Surface speed, page 44 Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
this inverse relationship. With the long-term permitted appli- Diagram 04: Coefficient of friction as a function of the
cation temperature of +120 °C the permitted surface pres- m/s Rotating Oscillating Linear surface speed, p = 1 MPa 200
sure is less than 10 MPa. The recommended maximum 180
Continuous 0.8 0.6 1 rotating oscillating
160
surface pressure is a mechanical material parameter. No Short-term 1.5 1.1 2 0.5
140
conclusions regarding the tribological properties can be 120
Table 03: Maximum surface speeds 0.4
drawn from this. 100
Wear [µm/km]
0.3
60
40
Temperatures 0.2
40
20
The short-term permissible temperature limit is +140 °C,
30 0
thus permitting the use of iglidur® N54 plain bearings in all 0.1
0 10 20 30
applications with elevated ambient temperatures. However, Load [MPa]
20 0.0
the compressive strength of iglidur® N54 bearings decre- 0 10 20 30 40 50 60 70 80 Diagram 07: Wear for oscillating and rotating applica
ases as temperatures increase. The additional frictional heat Load [MPa] tions with shaft material Cf53 hardened and ground
Load [MPa]
10
in the bearing system should be taken into account when Diagram 05: Coefficient of friction as a function of the steel, as a function of the pressure
considering the temperature limits. At temperatures over pressure, v = 0.01 m/s
0
20 40 80 120 +60 °C an additional securing is required.
Temperature [°C] Shaft materials Installation tolerances
Diagram 02: Permissible maximum surface pressure of Application temperatures, page 49 It is important to select a suitable shaft material. As a rule, iglidur® N54 plain bearings are standard bearings for shafts
as a function of temperature (36 MPa at +20 °C) Additional securing, page 49 iglidur® N54 is suitable for use with hard or soft shafts, but with h-tolerance (recommended minimum h9). The bearings
"hard" shaft surfaces tend to give better service life. Starting are designed for pressfit into a housing machined to a
at loads of 1 MPa, wear increases measurably and continu- H7 tolerance. After being assembled into a nominal size
Diagram 03 shows the elastic deformation of iglidur® N54
Friction and wear ously. If the shaft material you plan to use is not contained housing, the inner diameter automatically adjusts to the E10
with radial loads.
iglidur® N54 has a low coefficient of friction. However, it in this list, please contact us. tolerances. For particular dimensions the tolerance differs
must be noted that an extremely coarse sliding surface can depending on the wall thickness (please see product range
Surface pressure, page 41
increase the friction. We recommend shaft surface finishes Shaft materials, page 52 table).
(Ra) of 0.1 to a maximum of 0.4 µm. The coefficient of fric-
5.0 Testing methods, page 57
tion of iglidur® N54 bearings is only marginally dependent iglidur® N54 Dry Greases Oil Water
on the surface speed. The influence of the load is greater; C. o. f. µ 0.15–0.23 0.09 0.04 0.04 Diameter Shaft iglidur® N54 Housing
+23 °C +60 °C an increase in load lowers the coefficient of friction to as
Table 04: Coefficient of friction against steel (Ra = 1µm, d1 [mm] h9 [mm] E10 [mm] H7 [mm]
low as 0.8. up to 3 0–0.025 +0.014 +0.054 0 +0.010
2.5 50 HRC)
Deformation [%]
484 Online tools and more information www.igus.eu/n54 3D-CAD files, prices and delivery time online www.igus.eu/n54 485
N54SM iglidur® N54 | Product range iglidur® N54 | Product range N54FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
486 Online tools and more information www.igus.eu/n54 3D-CAD files, prices and delivery time online www.igus.eu/n54 487
iglidur®
N54 My sketches
UL94 V0 rating
High abrasion resistance
Universal installation
Lubrication and maintenance-free
Standard range from stock
Load [MPa]
●● Switch cabinets
UV radiation.
●● Hinges
0.1
0.001 0.01 0.1 1.0 10.0
Surface speed [m/s]
Medium Resistance
Diagram 01: Permissible pv values for iglidur® G V0 Alcohol + to 0
Available from stock bearings with a wall thickness of 1 mm dry running against Hydrocarbons +
Detailed information about delivery time online. a steel shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
Fuels +
Block pricing online Moisture absorption Diluted acids 0 to –
No minimum order value. From batch size 1. The moisture absorption of iglidur® G V0 plain bearings is Strong acids –
approximately 0.7 % weight in standard climatic conditions. Diluted alkalines +
Max. +130 °C The saturation limit submerged in water is 4 % weight. This Strong alkalines 0
Min. –40 °C must be taken into account along with other environmental + resistant 0 conditionally resistant – not resistant
influences. All data given at room temperature [+20 °C]
Ø 6–40 mm Table 02: Chemical resistance
Diagram, www.igus.eu/gv0-moisture
More dimensions upon request
Vacuum Chemical table, page 1478
Online product finder iglidur® G V0 plain bearings outgas in a vacuum. Use in
www.igus.eu/iglidur-finder vacuum is only possible with dehumidified bearings.
490 Online tools and more information www.igus.eu/gv0 3D-CAD files, prices and delivery time online www.igus.eu/gv0 491
G V0 G V0
+130 °C iglidur G V0 | Technical data
®
iglidur G V0 | Technical data ® +130 °C
75 MPa 75 MPa
0.35 200
iglidur® G V0 is the first iglidur® material with a V0 rating Permissible surface speeds 180
0.30
in accordance with UL94 for universal applications at iglidur® G V0 has been developed for low to medium surface 160 rotating oscillating
normal temperature ranges. All other iglidur® materials with speeds. The maximum values shown in table 03 can only 0.25 140
Wear [µm/km]
comparable to the all-rounder, iglidur® G. conditions. 0.10 60
40
Surface speed, page 44 0.05
20
Mechanical properties
0.00 0
With increasing temperatures, the compressive strength m/s Rotating Oscillating Linear 0 10 20 30 40 50 60 70 80 0 5 10 15 20 25 30 35 40 45
of iglidur® G V0 plain bearings decreases. The diagram 02 Continuous 1 0.7 4 Load [MPa] Load [MPa]
shows this inverse relationship. However, at the long-term Short-term 2 1.4 5 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
maximum temperature of +130 °C the permissible surface pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Table 03: Maximum surface speeds
pressure is still around 35 MPa. The recommended maximum steel, as a function of the pressure
surface pressure is a mechanical material parameter. No
Temperatures
conclusions regarding the tribological properties can be Coefficients of friction and surfaces, page 47
The ambient temperatures greatly influence the wear
drawn from this. Wear resistance, page 50 iglidur® G V0 Dry Greases Oil Water
performance of plastic bearings. The short-term maximum
temperature is +210 °C, this allows the use of iglidur® G V0 C. o. f. µ 0.07–0.20 0.09 0.04 0.04
120 Shaft materials
plain bearings in heat treating applications in which the Table 04: Coefficient of friction against steel (Ra = 1µm,
100
The friction and wear are also dependent, to a large degree,
bearings are not subjected to additional loading. The 50 HRC)
on the shaft material. Shafts that are too smooth, increase
80 temperatures prevailing in the bearing system also have an
both the coefficient of friction and the wear of the bearing. For
influence on the bearing wear. With increasing temperatures, Installation tolerances
60 iglidur® G V0 a ground surface with an average roughness
the wear increases and this effect is significant when iglidur® G V0 plain bearings are standard bearings for
40
between 0.6 and 0.8 µm is recommended. Diagram 06
temperatures rise over +120 °C. At temperatures over shafts with h-tolerance (recommended minimum h9). The
Load [MPa]
4
2 0.1
Wear [µm/km]
3
1
2
304 SS
0 0.0
1 Cf53
0 25 50 75 100 0.10 0.15 0.20 0.25 0.30 0.35 0.40 0.45 0.50
Load [MPa] Surface speed [m/s] 0
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the Diagram 06: Wear, rotating with different shaft materials,
surface speed, p = 1 MPa p = 1 MPa, v = 0.3 m/s
492 Online tools and more information www.igus.eu/gv0 3D-CAD files, prices and delivery time online www.igus.eu/gv0 493
GV0SM iglidur® G V0 | Product range iglidur® G V0 | Product range GV0FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
6.0 +0.020 +0.068 8.0 6.0 GV0SM-0608-06 6.0 +0.020 +0.068 8.0 12.0 6.0 1.0 GV0FM-0608-06
8.0 +0.025 +0.083 10.0 10.0 GV0SM-0810-10 8.0 +0.025 +0.083 10.0 15.0 10.0 1.0 GV0FM-0810-10
10.0 +0.025 +0.083 12.0 8.0 GV0SM-1012-08 10.0 +0.025 +0.083 12.0 18.0 10.0 1.0 GV0FM-1012-10
10.0 +0.025 +0.083 12.0 9.0 GV0SM-1012-09 11.0 +0.032 +0.102 13.0 20.0 20.0 0.5 GV0FM-111320-20
10.0 +0.025 +0.083 12.0 10.0 GV0SM-1012-10 12.0 +0.032 +0.102 14.0 20.0 12.0 1.0 GV0FM-1214-12
10.0 +0.025 +0.083 12.0 15.0 GV0SM-1012-15 16.0 +0.032 +0.102 18.0 24.0 17.0 1.0 GV0FM-1618-17
10.0 +0.025 +0.083 12.0 17.0 GV0SM-1012-17 20.0 +0.040 +0.124 23.0 30.0 21.5 1.5 GV0FM-2023-21
12.0 +0.032 +0.102 14.0 12.0 GV0SM-1214-12 25.0 +0.040 +0.124 28.0 35.0 21.0 1.5 GV0FM-2528-21
16.0 +0.032 +0.102 18.0 15.0 GV0SM-1618-15 30.0 +0.040 +0.124 34.0 42.0 37.0 2.0 GV0FM-3034-37
20.0 +0.040 +0.124 23.0 20.0 GV0SM-2023-20 35.0 +0.050 +0.150 39.0 47.0 36.0 2.0 GV0FM-3539-36
25.0 +0.040 +0.124 28.0 20.0 GV0SM-2528-20 40.0 +0.050 +0.150 44.0 52.0 40.0 2.0 GV0FM-4044-40
30.0 +0.040 +0.124 34.0 30.0 GV0SM-3034-30 3)
After press-fit. Testing methods Page 57
35.0 +0.050 +0.150 39.0 40.0 GV0SM-3539-40
40.0 +0.050 +0.150 44.0 40.0 GV0SM-4044-40
3)
After press-fit. Testing methods Page 57
494 Online tools and more information www.igus.eu/gv0 3D-CAD files, prices and delivery time online www.igus.eu/gv0 495
iglidur®
G V0 My sketches
Load [MPa]
0.1
●● When a resistance to high temperatures and radiation. However, hardness, compressive strength and
chemicals is required the wear resistance of the material do not change.
0.01
iglidur® X, page 245 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
Typical application areas Diagram 01: Permissible pv values for iglidur® J2 bearings Alcohol +
●● Jig construction with a wall thickness of 1 mm dry running against a steel Hydrocarbons +
Available from stock
●● Industrial handling shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
Detailed information about delivery time online.
Fuels +
Moisture absorption Diluted acids 0 to –
Block pricing online
The moisture absorption of iglidur® J2 plain bearings in Strong acids –
No minimum order value. From batch size 1.
standard climatic conditions is approximately 0.2 % weight. Diluted alkalines +
The saturation limit submerged in water is 1.3 % weight. Strong alkalines + to 0
Max. +90 °C
Due to these low values considering expansion by moisture
Min. –50 °C + resistant 0 conditionally resistant – not resistant
absorption is only required in extreme cases.
All data given at room temperature [+20 °C]
Ø 6–25 mm Diagram, www.igus.eu/j2-moisture Table 02: Chemical resistance
More dimensions upon request
Vacuum
Chemical table, page 1478
In vacuum applications, any absorbed moisture content is
Online product finder
outgassed. Use in vacuum is only possible with dehumidified
www.igus.eu/iglidur-finder
bearings.
498 Online tools and more information www.igus.eu/j2 3D-CAD files, prices and delivery time online www.igus.eu/j2 499
J2 J2
+90 °C iglidur J2 | Technical data
®
iglidur J2 | Technical data ® +90 °C
46 MPa 46 MPa
0.30 400
With respect to its general mechanical and thermal speci Permissible surface speeds
350
fications, iglidur® J2 is directly comparable to our classic, iglidur® J2 is mainly suitable for low speeds in dry running, rotating oscillating
0.25 300
iglidur® J. Therefore the iglidur® J2 is superior to iglidur® J with but the specified values shown in table 03 can only be
Wear [µm/km]
is reduced when running dry. levels. In practice, though, this temperature level is rarely
0.15 100
reached due to varying application conditions.
50
Mechanical properties
0.10 0
With increasing temperatures, the compressive strength of Surface speed, page 44 0 5 10 15 20 25 30 40 5 10 20 30 40
iglidur® J2 plain bearings decreases. The recommended Load [MPa] Load [MPa]
maximum surface pressure is a mechanical material para m/s Rotating Oscillating Linear Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
meter. No conclusions regarding the tribological properties Continuous 0.8 0.7 3 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
can be drawn from this. Short-term 1.9 1.1 5 steel, as a function of the pressure
20
when temperatures rise over +90 °C. At temperatures over
delivers good wear values especially with cutting steel in E10 tolerances. In relation to the installation tolerance, the
10 +60 °C an additional securing is required.
rotation at 1 MPa. When running dry, the wear values are inner diameter changes with the absorption of humidity.
0
20 30 40 50 60 70 80 90 sometimes significantly higher on other shafts.
Application temperatures, page 49
Temperature [°C] Unlike many other iglidur® materials, the wear rate in Testing methods, page 57
Additional securing, page 49
Diagram 02: Permissible maximum surface pressure of pivoting is slightly higher compared to the rate in rotation
as a function of temperature (46 MPa at +20 °C) with otherwise identical parameters (diagram 07). Diameter Shaft iglidur® J2 Housing
Friction and wear d1 [mm] h9 [mm] E10 [mm] H7 [mm]
Diagram 03 shows the elastic deformation of iglidur® J2 Coefficient of friction and wear resistance are dependent Shaft materials, page 52 up to 3 0–0.025 +0.014 +0.054 0 +0.010
under different loads. A possible deformation could be, on the application parameters (diagrams 04 and 05). > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
among others, dependant on the duty cycle of the load. iglidur J2 ®
Dry Greases Oil Water > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Coefficients of friction and surfaces, page 47 C. o. f. µ 0.11–0.27 0.08 0.07 0.04 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
Surface pressure, page 41 Wear resistance, page 50 > 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
Table 04: Coefficient of friction against steel (Ra = 1µm,
50 HRC) > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
> 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
10 0.25 10.0 > 80 to 120 0–0.087 +0.072 +0.212 0 +0.035
9
+23 °C +60 °C > 120 to 180 0–0.100 +0.085 +0.245 0 +0.040
8 8.0
7 Table 05: Important tolerances for plain bearings
0.20
HR carbon steel
H.a. aluminium
Deformation [%]
4 4.0
Wear [µm/km]
3 0.15
304 SS
2 2.0
Cf53
1
0 0.10 0.0
0 5 10 15 20 25 30 35 40 45 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1.0 MPa
500 Online tools and more information www.igus.eu/j2 3D-CAD files, prices and delivery time online www.igus.eu/j2 501
J2SM iglidur® J2 | Product range iglidur® J2 | Product range J2FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
502 Online tools and more information www.igus.eu/j2 3D-CAD files, prices and delivery time online www.igus.eu/j2 503
iglidur®
J2 My sketches
iglidur AB ®
Antibacterial
Universal installation
Good media-resistance
Lubrication and maintenance-free
Standard range from stock
Load [MPa]
iglidur® X, page 245 0.1
UV rays. However, hardness, compressive strength and the
wear resistance of the material do not change.
122)
According to test results for antimicrobial Typical application areas 0.01
effectiveness in accordance with ISO 22196:2011 ●● Medical technology 0.001 0.01 0.1 1.0 10.0
Surface speed [m/s] Medium Resistance
●● Laboratory technology
Diagram 01: Permissible pv values for iglidur® AB bearings Alcohol + to 0
●● Ventilation systems
Available from stock with a wall thickness of 1 mm dry running against a steel Hydrocarbons +
●● Sanitary furniture and equipment
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Greases, oils without additives +
●● Bearings of patient and care furniture
Fuels +
Block pricing online Diluted acids 0 to –
Moisture absorption
No minimum order value. From batch size 1. Strong acids –
The humidity absorption of iglidur® AB bearings amounts
to about 0.8 % weight in standard climatic conditions. The Diluted alkalines +
Max. +70 °C Strong alkalines 0
saturation limit submerged in water is 1.6 % weight.
Min. –40 °C
+ resistant 0 conditionally resistant – not resistant
Diagram, www.igus.eu/ab-moisture
All data given at room temperature [+20 °C]
Ø 6–20 mm
Vacuum Table 02: Chemical resistance
More dimensions upon request
In vacuum applications, any absorbed moisture content is
outgassed. Use in vacuum is only possible with dehumidified Chemical table, page 1478
Online product finder
bearings.
www.igus.eu/iglidur-finder
506 Online tools and more information www.igus.eu/ab 3D-CAD files, prices and delivery time online www.igus.eu/ab 507
AB AB
+70 °C iglidur AB | Technical data
®
iglidur AB | Technical data ® +70 °C
25 MPa 25 MPa
0.3 400
iglidur® AB was specially developed for applications in Permissible surface speeds 360
areas with hygienic requirements. These types of appli iglidur® AB is mainly suitable for low speeds in dry running, 320 rotating oscillating
cations often involve manually actuated pivoting units but the specified values shown in table 03 can only be 280
Wear [µm/km]
"anti-bacterial" materials – is not a substitute for adequate levels. In practice, though, this temperature level is rarely 0.1 120
hygienic measures. reached due to varying application conditions. 80
40
Surface speed, page 44 0.0 0
Mechanical properties 0 5 10 15 20 25 30 0 5 10 15 20 25
With increasing temperatures, the compressive strength of m/s Rotating Oscillating Linear Load [MPa] Load [MPa]
iglidur® AB plain bearings decreases. The recommended Continuous 0.7 0.5 1.0 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
maximum surface pressure is a mechanical material para Short-term 1.0 0.7 1.8 pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
meter. No conclusions regarding the tribological properties steel, as a function of the pressure
Table 03: Maximum surface speeds
can be drawn from this.
anodised aluminium shafts cause a noticeable increase in inner diameter changes with the absorption of humidity. For
10 Application temperatures, page 49
the wear. As illustrated in diagram 07, the wear rate from particular dimensions the
Additional securing, page 49
0 pivoting and rotating movements at loads in increasing tolerance differs depending on the wall thickness (please
20 30 40 50 60 70 levels is also quite similar if the remaining parameters are see product range table).
Temperature [°C]
Friction and wear identical.
Diagram 02: Permissible maximum surface pressure of
Coefficient of friction and wear resistance are dependent Testing methods, page 57
as a function of temperature (25 MPa at +20 °C)
on the application parameters (diagrams 04 and 05). Shaft materials, page 52
Diameter Shaft iglidur® AB Housing
Diagram 03 shows the elastic deformation of iglidur AB ®
Coefficients of friction and surfaces, page 47 iglidur AB ®
Dry Greases Oil Water d1 [mm] h9 [mm] E10 [mm] H7 [mm]
at radial loads. A possible deformation could be, among Wear resistance, page 50 C. o. f. µ 0.11–0.21 0.09 0.04 0.04 up to 3 0–0.025 +0.014 +0.054 0 +0.010
others, dependant on the duty cycle of the load. > 3 to 6 0–0.030 +0.020 +0.068 0 +0.012
Table 04: Coefficient of friction against steel (Ra = 1µm,
50 HRC) > 6 to 10 0–0.036 +0.025 +0.083 0 +0.015
Surface pressure, page 41 > 10 to 18 0–0.043 +0.032 +0.102 0 +0.018
> 18 to 30 0–0.052 +0.040 +0.124 0 +0.021
14 1.0 0.5 > 30 to 50 0–0.062 +0.050 +0.150 0 +0.025
12 > 50 to 80 0–0.074 +0.060 +0.180 0 +0.030
0.8 0.4
10 Table 05: Important tolerances for plain bearings
6 0.4 0.2
Wear [µm/km]
304 SS
+23 °C +60 °C 0.2 0.1
2
Cf53
0 0.0 0.0
0 10 20 30 40 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Diagram 06: Wear, rotating with different shaft materials,
Load [MPa] Surface speed [m/s]
p = 1 MPa, v = 0.3 m/s
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 1 MPa
508 Online tools and more information www.igus.eu/ab 3D-CAD files, prices and delivery time online www.igus.eu/ab 509
ABSM iglidur® AB | Product range iglidur® AB | Product range ABFM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
510 Online tools and more information www.igus.eu/ab 3D-CAD files, prices and delivery time online www.igus.eu/ab 511
iglidur®
AB My sketches
514 Online tools and more information www.igus.eu/rw370 3D-CAD files, prices and delivery time online www.igus.eu/rw370 515
RW370SM iglidur® RW370 | Product range iglidur® RW370 | Product range RW370FM
30
m
30°
r
°
Type Dimensions [mm] Type Dimensions [mm]
d2
d3
d1
d1
d2
0.5
30°
b1 b2
iglidur® material
iglidur® material
b1
Outer-Ø d2
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Length b1
Form S
Form F
Metric
Metric
2)
Thickness < 1 mm: chamfer = 20° 2)
Thickness < 1 mm: chamfer = 20°
516 Online tools and more information www.igus.eu/rw370 3D-CAD files, prices and delivery time online www.igus.eu/rw370 517
iglidur®
RW370 My sketches
Elimination of noise
Very high elasticity
Sealing function possible
Lubrication and maintenance-free
UV resistance
1.0 iglidur® B plain bearings are not resistant to UV radiation.
Load [MPa]
0.1
Medium Resistance
0.001 0.01 0.1 1.0 10.0 Alcohol + to 0
Surface speed [m/s] Hydrocarbons –
Diagram 01: Permissible pv values for iglidur® B bearings Greases, oils without additives –
Available upon request with a wall thickness of 1 mm dry running against a steel Fuels –
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Diluted acids 0 to –
Strong acids –
Moisture absorption Diluted alkalines –
Order-related
The moisture absorption of iglidur® B plain bearings is Strong alkalines –
approximately 1 % weight in standard climatic conditions.
+ resistant 0 conditionally resistant – not resistant
Max. +100 °C The saturation limit submerged in water is 6.3 % weight. This
All data given at room temperature [+20 °C]
Min. –40 °C must be taken into account along with other environmental
Table 02: Chemical resistance
influences.
Chemical table, page 1478
Order-related Diagram, www.igus.eu/b-moisture
Vacuum
Online product finder Use of iglidur® B plain bearings is limited in vacuum. Only
www.igus.eu/iglidur-finder dehumidified bearings should be tested.
520 Online tools and more information www.igus.eu/b 3D-CAD files, prices and delivery time online www.igus.eu/b 521
B B
+100 °C iglidur B | Technical data
®
iglidur B | Technical data ® +100 °C
40 MPa 40 MPa
0.7 200
The compressive strength of the iglidur® B bearings is on Permissible surface speeds 180
0.6
the one hand low, but on the other, is an important pro- iglidur® B bearings can be continuously used up to 0.7 m/s 160 rotating oscillating
perty of the bearing. They are mainly used where vibration in rotation. The frictional heat provides the speed limits. In 0.5 140
Wear [µm/km]
Mechanical properties 0.2 60
With increasing temperatures, the compressive strength of Surface speed, page 44 40
0.1
20
iglidur® B plain bearings decreases. The diagram 02 shows
0.0 0
this inverse relationship. The recommended maximum m/s Rotating Oscillating Linear 0 10 20 30 40 0 10 20 30 40
surface pressure is a mechanical material parameter. No Continuous 0.7 0.5 2 Load [MPa] Load [MPa]
conclusions regarding the tribological properties can be Short-term 1 0.7 3 Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
drawn from this. pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
Table 03: Maximum surface speeds
steel, as a function of the pressure
120
Temperatures
100
Shaft materials Installation tolerances
The operating temperature of the iglidur® B bearings is limi-
The influence of the shaft is not very large on the wear iglidur® B plain bearings are standard bearings for shafts
80 ted to +100 °C. At temperatures over +50 °C an additional
resistance. with h-tolerance (recommended minimum h9). The bearings
securing is required. The wear resistance too declines dis-
60 Diagrams 06 and 07 clarify that very similar wear data are are designed for pressfit into a housing machined to a
proportionately from +70 °C.
40
attained with different shaft materials. If high operational H7 tolerance. After being assembled into a nominal size
Load [MPa]
performances are expected, the bearing load should not housing, in standard cases the inner diameter automatically
20 Application temperatures, page 49
be too high. adjusts to the D11 tolerances. For particular dimensions the
Additional securing, page 49
0 tolerance differs depending on the wall thickness (please
20 30 40 50 60 70 80 90 100 Shaft materials, page 52 see product range table).
Temperature [°C]
Diagram 02: Permissible maximum surface pressure of Friction and wear
iglidur® B Dry Greases Oil Water Testing methods, page 57
as a function of temperature (40 MPa at +20 °C) The coefficients of friction increase slightly with the speed
and decrease with the load. Surface finishes of the shaft C. o. f. µ 0.18–0.28 0.09 0.04 0.04
between 0.4 and 0.6 Ra are ideal. As far as the bearing load Table 04: Coefficient of friction against steel (Ra = 1µm, Diameter Shaft iglidur® B Housing
Diagram 03 shows the elastic deformation of iglidur® B at is not too high, the attained wear values are pretty good. 50 HRC) d1 [mm] h9 [mm] D11 [mm] H7 [mm]
radial loads. The elastic deformation at 40 MPa at room An increase in load results in a disproportionate increase up to 3 0–0.025 +0.020 +0.080 0 +0.010
temperature is 5.3 %. in abrasion. 2.5
> 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
> 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
Surface pressure, page 41 Coefficients of friction and surfaces, page 47
2.0 > 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
Wear [µm/km]
18.0 0.5 Table 05: Important tolerances for plain bearings
304 SS
0.5
Cf53
16.0 according to ISO 3547-1 after pressfit
14.0 +23 °C +60 °C
0.4 0.0
Coefficient of friction [µ]
12.0
Diagram 06: Wear, rotating with different shaft materials,
10.0
0.3 p = 1 MPa, v = 0.3 m/s Product range
8.0
Deformation [%]
2.0
0.0 0.1
0 15 30 40 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
522 Online tools and more information www.igus.eu/b 3D-CAD files, prices and delivery time online www.igus.eu/b 523
iglidur®
B My sketches
Dry running
Good abrasion resistance
Lubrication and maintenance-free
UV resistance
1.0 iglidur® C plain bearings are not resistant to UV radiation.
Load [MPa]
0.1 Medium Resistance
0.001 0.01 0.1 1.0 10.0
Surface speed [m/s]
Alcohol + to 0
Diagram 01: Permissible pv values for iglidur® C bearings Hydrocarbons +
Available upon request with a wall thickness of 1 mm dry running against a steel Greases, oils without additives +
Detailed information about delivery time online. shaft, at +20 °C, mounted in a steel housing Fuels +
Diluted acids 0 to –
Moisture absorption Strong acids –
Order-related Diluted alkalines +
The moisture absorption of iglidur® C plain bearings is
approx. 6.9 % weight when saturated in water. This must Strong alkalines 0
Max. +90 °C be taken into account for these types of applications. + resistant 0 conditionally resistant – not resistant
Min. –40 °C All data given at room temperature [+20 °C]
Diagram, www.igus.eu/c-moisture
Table 02: Chemical resistance
Vacuum
Order-related
iglidur® C plain bearings outgas in a vacuum. Applications Chemical table, page 1478
in vacuum are only p ossible to a limited extent.
Online product finder
www.igus.eu/iglidur-finder
526 Online tools and more information www.igus.eu/c 3D-CAD files, prices and delivery time online www.igus.eu/c 527
C C
+90 °C iglidur C | Technical data
®
iglidur C | Technical data ® +90 °C
40 MPa 40 MPa
0.7 200
Bearings made from iglidur® C were developed especially Permissible surface speeds 180
0.6
for applications where the use of PTFE and silicon is not Although important solid lubricants have been deliberately 160 rotating oscillating
possible. Such applications can be found in electronics, avoided in the development of iglidur® C, the bearings are 0.5 140
Wear [µm/km]
make the further employment of this material reasonable. being possible to temporarily attain rotating speeds of up to 0.2 60
1.5 m/s, the main applications should be undertaken with 40
0.1
20
Mechanical properties speeds of less than 0.5 m/s.
0.0 0
With increasing temperatures, the compressive strength of 0 10 20 30 40 50 60 70 80 0 10 20 30 40
iglidur® C plain bearings decreases. The diagram 02 shows Surface speed, page 44 Load [MPa] Load [MPa]
this inverse relationship. The recommended maximum Diagram 05: Coefficient of friction as a function of the Diagram 07: Wear for oscillating and rotating applica
surface pressure is a mechanical material parameter. No m/s Rotating Oscillating Linear pressure, v = 0.01 m/s tions with shaft material Cf53 hardened and ground
conclusions regarding the tribological properties can be Continuous 1 0.7 2 steel, as a function of the pressure
drawn from this. Short-term 1.5 1.1 3
Table 03: Maximum surface speeds Shaft materials Installation tolerances
60
Diagram 06 clearly shows how important the "suitable" iglidur® C plain bearings are standard bearings for shafts
50 counter partner could be. Although all shown results of with h-tolerance (recommended minimum h9). The bearings
Temperatures
40 these rotation experiments can be understood as very good, are designed for pressfit into a housing machined to a
The short-term maximum application temperature is
the difference is sometimes significant. This difference rises H7 tolerance. After being assembled into a nominal size
30 +130 °C. However no real loads are possible at this
still further with increasing pressures. housing, in standard cases the inner diameter automatically
20
temperature. Therefore it would be reasonable to limit the
adjusts to the D11 tolerances.
Load [MPa]
HR carbon steel
H.a. aluminium
Coefficients of friction and surfaces, page 47 0.4 Table 05: Important tolerances for plain bearings
Wear [µm/km]
Wear resistance, page 50 0.3
according to ISO 3547-1 after pressfit
304 SS
0.2
Cf53
0.1
15.8 0.5
0.0
+23 °C +60 °C
Diagram 06: Wear, rotating with different shaft materials, Product range
0.4
p = 1 MPa, v = 0.3 m/s iglidur® C plain bearings are produced to special order.
Coefficient of friction [µ]
0.3
Deformation [%]
5.5
0.2
0.0 0.1
0 15 30 40 0.05 0.10 0.15 0.20 0.25 0.30
Load [MPa] Surface speed [m/s]
Diagram 03: Deformation under pressure and temperature Diagram 04: Coefficient of friction as a function of the
surface speed, p = 0.75 MPa
528 Online tools and more information www.igus.eu/c 3D-CAD files, prices and delivery time online www.igus.eu/c 529
iglidur...
More products
...
...
...plastics
iglidur® – more products and services | Product range
iglidur® piston rings and split bearings
An alternative to Easy to fit, security with Easy to install due to With anti-rotation
PTFE tape: the double flange design: split design: feature
Piston rings Clip bearings Split bearings
Page 535 Page 544 Page 545 Page 546
Press in and fold down: Press and plug: Join and snap into place:
Special solution
Flanged bearing Double flange bearing Clip On
Page 547 Page 548 page 549
For precise conveying: Secured by screws: Zero clearance: Cushion and dampen:
iglidur® iglidur® Preloaded Polymer
knife edge rollers flange bearings bearings disc springs
Page 551 Page 555 Page 559 Page 563
igus® Service
532 533
iglidur piston rings
®
Easy installation
Cost-effective
More wear-resistant than PTFE-strips
High load capacity
Standard range from stock
534
iglidur®
piston rings iglidur® piston rings | Advantages iglidur® piston rings | Product range iglidur®
piston rings
Easy and economic: iglidur® piston rings iglidur® J piston rings, from stock
R max. 0.2 R max. 0.2
iglidur® J is our all-round material when it comes to an outstanding running performance and low
Easy installation
iglidur® piston rings coefficients of friction on the broadest range of shafts. The flexibility of iglidur® J enables the typical
assembly expected with piston rings using the push over/clip on method. Good media resistance
R max. 0.1
Why complicate things if you do not need to? rounds off the range of properties.
dH
dG
dG
dS
Some things can actually be very easy: Replace bG bG R max. 0.1 Order key
Cost-effective complex stamped PTFE strips with a single
clip-on guide ring, for example in cylinders, Type Dimensions [mm]
control valves and fittings. In addition to the
More wear-resistant standard iglidur® J range, it is also possible
than PTFE-strip to configure your desired piston ring from the entire
iglidur® bearing range.
iglidur® material
Piston ring
T
d2
d1
b2
Outer Ø
Inner Ø
Length
High load capacity
Metric
When to use it?
●● When piston rings with excellent wear
properties are required
R max. 0.2 b1 R max
Wear-resistant and ●● When simple assembly is of great importanceR max. 0.2 R max. 0.2
dH
dH
dG
dG
dG
dG
dS
dS
bG bG R max. 0.1 bG bG
T
h13 ±0.5 [°] h13 ±0.5 [°]
d2
d2
d1
d1
b2
b2
6 8 6 1.0 0 JPRM-0608-06 45 50 10 2.0 0 JPRM-4550-10
8 10 10 1.0 0 JPRM-0810-10 50 55 5.4 2.5 20 JPRM-5055-054
10 12 5.4 2.5 20 JPRM-1012-054 50 55 10 2.0 0 JPRM-5055-10
12 b1
14 5.4 2.5 20 JPRM-1214-054 58 63 9.5 (-0.22) 2.5 25 b1
JPRM-5863-095
Traditional method: 14 16 5.4 2.5 20 JPRM-1416-054 60 65 5.4 2.5 20 JPRM-6065-054
14 16 10 1.0 20 JPRM-1416-10 70 75 5.4 2.5 20 JPRM-7075-054
16 18 5.4 2.5 20 JPRM-1618-054
More Information about iglidur® material
1 2 3 4 5
17 22 5.4 2.5 25 JPRM-1722-054
20 23 5.4 2.5 20 JPRM-2023-054 and technical data
25 28 5.4 2.5 20 JPRM-2528-054 iglidur® J Page 141
28 32 10 1.0 20 JPRM-2832-10
With iglidur®: 28 32 20 1.0 20 JPRM-2832-20 Max. +90 °C
28 33 5.4 2.5 25 JPRM-2833-054 Min. –50 °C
30 34 5.4 2.5 20 JPRM-3034-054
Ø 6–70 mm
1 2
35 39 5.4 2.5 20 JPRM-3539-054
35 40 5.4 2.5 25 JPRM-3540-054 More dimensions upon request
40 44 5.4 2.5 20 JPRM-4044-054 Available from stock
45 50 5.4 2.5 20 JPRM-4550-054 Detailed information about delivery time online.
536 Online tools and more information www.igus.eu/pistonring 3D-CAD files, prices and delivery time www.igus.eu/pistonring 537
iglidur®
piston rings iglidur® piston rings | Product range
Custom-made piston rings
In addition to the stock range of iglidur® J piston rings, you can also select your desired piston ring on
the basis of the 0.2
R max. entire iglidur® bearing range.
R max. 0.2
Use the entire iglidur bearing range and choose the material best suited to your application. Your
®
dH
dG
dG
dS
Required Outer Ø
Required Inner Ø
required material
Required length
T
Piston ring
d2
d1
b2
iglidur®
Metric
R max. 0.2 b1 R max. 0.2 R max. 0.2
R max. 0.1
dH
dH
dG
dG
dG
dS
●● iglidur® A180: FDA-compliant Page 363 made easy. With just a few clicks, the piston ring
Material: iglidur® M250
d2
d1
d1
b2
b2
●● iglidur® J350: > +90 °C Page 173 finder can find the optimum iglidur® material and
●● iglidur® H1: Temperature up to +200 °C select the appropriate dimensions from the standard
Page 297 catalogue range in order to define a piston ring in a
Easy installation
b1 customised width. b1
In addition to mechanical processing of existing www.igus.eu/pistonring-finder
Good abrasion resistance
iglidur® bearings to piston rings, we also develop
custom-made piston ring solutions for your volume
Predictable service life
requirements. Please contact us. We will support
you with your design and create an appropriate
Custom versions possible
proposal.
Lubrication and maintenance-free
Standard range from stock
Available from stock Material: iglidur® M250 Custom solution iglidur® Clip On
Detailed information about delivery time online. 6 types ●● The disc is snapped onto the flanged bearing
Ø 3–25 mm with undercuts
Max. +80 °C More dimensions upon request ●● Compensation of axial clearance
Min. –40 °C ●● Pre-assembly possible
Imperial dimensions available ●● Combination of conductive and non-conductive
From page 1391 materials
From page 549
540 Online tools and more information www.igus.eu/clips 3D-CAD files, prices and delivery time www.igus.eu/clips 541
iglidur® clip bearings | Application examples iglidur® clip bearings | Technical data
General properties m/s Rotating Oscillating Linear
The clip bearings have an angled slot which allows the Continuous 0.8 0.6 2.5
bearings to be fitted from one side. After fitting, the bea- Short-term 2 1.4 5
ring expands and forms a lining for the hole in the metal
Table 01: Maximum surface speeds
plate. The shaft prevents the clip bearing from falling out the
housing. Even during linear movement, the bearing cannot
slide out of the housing. iglidur® clip bearings are made from Temperatures
wear resistant material iglidur® M250. For operating temperatures up to +80 °C iglidur® clip bea-
iglidur® M250 is a plain bearing material with strong wear resi- rings display high wear resistance. Even in the cold, the
stance at average loads. The bearings are self-lubricating and plain bearings remain elastic and resistant to wear.
can be used dry. If required the bearings can also be lubri-
cated. The material iglidur® M250 is resistant to all common Application temperatures, page 49
This cutting mechanism is used in the beverage Easy-to-clean and cost-effective iglidur® clip
lubricants.
industry. All used components meet the requirement bearings and iglidur® flange bearings are used in a
of freedom from lubrication with low weight and low honeycomb. iglidur® M250 Application Temperature
cost. Mechanical properties Minimum –40 °C
The permissible static pressure of iglidur® M250 at room Max. long-term +80 °C
temperature is 20 MPa. Due to the possibility of high tole- Maximum, short-term +170 °C
rances in the housing bore, the clip bearing has a high Table 02: Temperature limits
compressive strength even for punched holes.
For bearing surfaces that are very small, the vibration dam-
Assembly
pening properties and the resistance to edge loads are
For installation, the plain bearings are pressed together on
especially important.
the side with the large flange. The angled slot makes the
bearing spiral shaped so that it can be placed easily into
iglidur® M250, page 95
the metal plate.
The slot also compensates for expansions of the circum
50
ference. In this way, a tight clearance is possible with the
40 clip bearings. The bearing clearance is dimensioned in such
a way that in a housing bore with a nominal diameter, a
By using wear-resistant iglidur® clip bearings, the The guide rod in this pharmacy printer has been 30
shaft made with the same nominal diameter turns easily.
lowering mechanism for radiator mascots on luxury attached using igus® clip bearings.
20
The clip bearings should be fitted into a housing with a "H"
cars could be improved.
class tolerance, up to H13. The clip bearing can also rotate
Load [MPa]
10 within the housing bore. The clip bearing can also rotate
within the housing bore.
0
20 30 40 50 60 70 80
Temperature [°C] Diameter Shaft h9 Tolerances Housing H7
Diagram 01: Permissible maximum surface pressure of d1 [mm] [mm] D11 [mm] [mm]
as a function of temperature (20 MPa at +20 °C) up to 3 0–0.025 +0.020 +0.080 0 +0.010
> 3 to 6 0–0.030 +0.030 +0.105 0 +0.012
Permissible surface speeds > 6 to 10 0–0.036 +0.040 +0.130 0 +0.015
Clip bearings are extremely wear resistant in slow rotating, > 10 to 18 0–0.043 +0.050 +0.160 0 +0.018
oscillating, and linear movements. The maximum surface > 18 to 30 0–0.052 +0.065 +0.195 0 +0.021
speeds for the different movements are the same as for the > 30 to 50 0–0.062 +0.080 +0.240 0 +0.025
material iglidur® M250 (table 01). > 50 to 80 0–0.074 +0.100 +0.290 0 +0.030
Rattle-free positioning of seat systems with iglidur®
With lubrication the permissible speeds can be increased. Table 03: Important tolerances for plain bearings
plain/clip bearings, e.g. inner/tilt and seat height
according to ISO 3547-1 after pressfit
adjustment.
Surface speed, page 44
542 Online tools and more information www.igus.eu/clips 3D-CAD files, prices and delivery time www.igus.eu/clips 543
iglidur®
MCM iglidur® clip bearings | Product range iglidur® clip bearings | Product range iglidur®
MYM
Clip bearings for sheet metals – captive with double flange Split bearings (Clips2) – easy assembly
iglidur® material
Image exemplary Image exemplary
Inner-Ø d1
Inner-Ø d1
Length b1
b1
d3 b1
Design
Design
Metric
Metric
s
b2
b1
s
Material: Material:
30°
max.
.
25°
0.5
d1
d4
d2
d3
d1
d2
with anti-rotation feature Page 546
Imperial dimensions available
30°
From page 1447 Imperial dimensions available
r = max. 0.5 mm From page 1448
544 Online tools and more information www.igus.eu/clips 3D-CAD files, prices and delivery time online www.igus.eu/clips2 545
iglidur®
MYM...K iglidur® clip bearings | Product range iglidur® clip bearings | Product range iglidur®
MKM
Split bearing with anti-rotation feature Flanged bearings – press in and fold down
iglidur® material
iglidur® material
Image exemplary
Outer-Ø d2
Inner-Ø d1
Inner-Ø d1
Length b1
Design
Design
s
d2
Metric
Metric
d3
d1
d2
ma x.
25°
Material: Material:
iglidur® M250 Page 95 b2 iglidur® M250 Page 95
b1
b1
Imperial dimensions available
From page 1448 Sample dimension [mm]
0.5
b2
Assembly:
k k
Dimensions [mm]
d1 d1-Tolerance8) d29) d3 b1 b2 k Part No.
±0.40 –0.40 –0.13
4 +0.025 +0.075 5.20 7.00 4.00 0.60 1.0 MYM-04-04-K
5 +0.025 +0.075 6.20 8.00 5.00 0.60 1.0 MYM-05-05-K
6 +0.025 +0.075 7.20 9.50 6.00 0.60 1.5 MYM-06-06-K
10 +0.025 +0.075 11.60 15.00 10.00 0.80 2.0 MYM-10-10-K Press in, fold down, ready: axial load on both sides
14 +0.025 +0.075 15.60 21.00 14.00 0.80 3.0 MYM-14-14-K
8)
d1 value is measured with a plug gauge after fitting into a reference housing d2 (+0.005)
9)
Recommended housing bore tolerance: H9
Please contact us if you need a custom-made bearing for your application. We will help you with your design,
drawing on the experience that we have with a large number of custom bearing solutions.
546 Online tools and more information www.igus.eu/clips2 3D-CAD files, prices and delivery time online www.igus.eu/mkm 547
iglidur®
MDM iglidur® clip bearings | Product range iglidur® custom-made | Product range iglidur®
Clip On
Double flange bearing – press and plug iglidur® Clip On: connect and snap into place
s
Order key
b1
s
s
b1
Type Dimensions [mm]
d1
d2
Outer-Ø d2
Inner-Ø d1
d3
d1
d2
Design
Metric
The solution for all applications in stamped Material:
sheet metal retainers iglidur® M250 Page 95
Material:
iglidur Clip On are frequently used in seat and convertible
®
iglidur RN89
®
Page 1482
iglidur® M250 Page 95
top systems and multi-joint hinges. iglidur® Clip On bearings
facilitate captive assembly even in punched sheet metal /
Sample dimension [mm] steering arms with limited fine blanking content.
d1 d1-Tolerance8) d2 d3 b1 s Part No.
12 +0.050 +0.160 13 16.5 7 0.5 MDM-1213-06 ●● Compensation of axial clearance
●● Pre-assembly possible
8)
d1 value is measured with a plug gauge after fitting into a reference housing d2 (+0.005)
●● Electrically conductive materials are available
●● Pressure-resistant materials up to 80 MPa
Fitting:
The disc is clipped onto the flange bushing with
undercuts.
Please contact us if you need a custom-made bearing for your application. We will help you with your design, Please contact us if you need this custom-made solution for your application. We will help you with your design,
drawing on the experience that we have with a large number of custom bearing solutions. drawing on the experience that we have with a large number of custom bearing solutions.
548 Online tools and more information www.igus.eu/mdm 3D-CAD files, prices and delivery time online www.igus.eu/clipon 549
iglidur®
clip My sketches
bearings
100 % lubrication-free
Low driving power
Tight deflection radii
Long service life of the belt
Cost-effective
Long service life
Standard range from stock
3.5
3.30
3.0
Available from stock
Detailed information about delivery time online. 2.5 2.39
552 Online tools and more information www.igus.eu/RLM 3D-CAD files, prices and delivery time online www.igus.eu/RLM 553
iglidur®
knife edge iglidur® knife edge rollers | Product range
rollers
Order key
Options:
iglidur® material
P210: iglidur® P210
iglidur® material
A180: iglidur® A180
A350: iglidur® A350
Outer-Ø d2
Inner-Ø d1
Length b1
Metric
Roller
d1
d1
d2 d2 b1 b1
d1 +0.1 [mm]
3.1
d2 ±0.1 [mm]
9.0
b1 –0.3 [mm]
50.0
Part No.
A180RLM-0309-50
bearings
4.1 9.0 50.0 A180RLM-0409-50
5.1 11.0 70.0 A180RLM-0511-70 Very good wear resistance
5.1 14.0 70.0 A180RLM-0514-70
6.1 12.0 70.0 A180RLM-0612-70 Maintenance-free dry running
6.1 14.0 70.0 A180RLM-0614-70
8.1 12.0 70.0 A180RLM-0812-70 Lightweight
8.1 14.0 70.0 A180RLM-0814-70
8.1 18.0 70.0 A180RLM-0818-70 Standard range from stock
10.1 20.0 70.0 A180RLM-1020-70
iglidur maintenance-
®
R
Order key
d5
iglidur® G: Type Size [mm]
Standard material for d1
Flange bearings
iglidur® material
b1
d4
b3
b2
possible. Due to the design of the bearing, high d7 G: iglidur® G
loads are possible although there is a minimal d3
J: iglidur® J
Inner Ø
precision requirement of the housing. X: iglidur® X
iglidur® J: ●● Very good wear resistance A180: iglidur® A180
Material for low wear ●● Lightweight
●● Lubrication-free Dimensions [mm]
d1 d1-Tolerance3) d213) d3 d4 d5 d6 d7 b1 b2 b3 R Part No.
Assembly (±0.2)
For low radial loads, it is sufficient to mount 10 +0.025 +0.083 12 30 14 15 4.5 22 6 2 1 4 GFL-10
iglidur® X: iglidur® flange bearings on one surface simply 12 +0.032 +0.102 14 36 16 18 4.5 26 6 2 1 4.5 GFL-12
Material for high with two bolts. For higher radial loads, it 14 +0.032 +0.102 16 42 18 21 5.5 30 6 2 1 5 GFL-14
temperature applications advisable to support the iglidur® flange bearing 16 +0.032 +0.102 18 48 20 24 5.5 34 6 2 1 5.5 GFL-16
in a hole. For this hole, large tolerances are 18 +0.032 +0.102 20 54 22 27 6.5 39 6 2 1 7 GFL-18
permitted, since it serves only as additional 20 +0.040 +0.124 23 60 26 30 6.5 44 10 3 2 7 GFL-20
support for the iglidur® flange bearing. In order 25 +0.040 +0.124 28 75 30 35 6.5 55 10 3 2 8.5 GFL-25
to achieve higher radial loads in the bearings, 30 +0.040 +0.124 34 90 36 40 8.5 66 10 3 2 10 GFL-30
iglidur® A180: the iglidur® flange bearing can be press-fit into a 35 +0.050 +0.150 39 95 41 55 8.5 77 10 3 2 12 GFL-35
Material for use in the recommended housing bore with H7 tolerances. 10 +0.025 +0.083 12 30 14 15 4.5 22 6 2 1 4 JFL-10
food sector The additional bolts ensure the fit of the bearing 12 +0.032 +0.102 14 36 16 18 4.5 26 6 2 1 4.5 JFL-12
in the housing. 14 +0.032 +0.102 16 42 18 21 5.5 30 6 2 1 5 JFL-14
16 +0.032 +0.102 18 48 20 24 5.5 34 6 2 1 5.5 JFL-16
20 +0.040 +0.124 23 60 26 30 6.5 44 10 3 2 7 JFL-20
25 +0.040 +0.124 28 75 30 35 6.5 55 10 3 2 8.5 JFL-25
30 +0.040 +0.124 34 90 36 40 8.5 66 10 3 2 10 JFL-30
35 +0.050 +0.150 39 95 41 55 8.5 77 10 3 2 12 JFL-35
10 +0.013 +0.071 12 30 14 15 4.5 22 6 2 1 4 XFL-10
12 +0.016 +0.086 14 36 16 18 4.5 26 6 2 1 4.5 XFL-12
Available from stock Material properties: 14 +0.016 +0.086 16 42 18 21 5.5 30 6 2 1 5 XFL-14
Detailed information about delivery time online. iglidur® G Page 79 16 +0.016 +0.086 18 48 20 24 5.5 34 6 2 1 5.5 XFL-16
iglidur J
®
Page 141 20 +0.020 +0.104 23 60 26 30 6.5 44 10 3 2 7 XFL-20
Depending on material: iglidur X
®
Page 245 25 +0.020 +0.104 28 75 30 35 6.5 55 10 3 2 8.5 XFL-25
iglidur® G: –40 °C up to +130 °C iglidur A180
®
Page 363 30 +0.020 +0.104 34 90 36 40 8.5 66 10 3 2 10 XFL-30
iglidur® J: –50 °C up to +90 °C 35 +0.025 +0.125 39 95 41 55 8.5 77 10 3 2 12 XFL-35
iglidur X:
®
–100 °C up to +250 °C 1 type, 4 materials 10 +0.025 +0.083 12 30 14 15 4.5 22 6 2 1 4 A180FL-10
iglidur A180: –50 °C up to +90 °C
®
Ø 10–35 mm 12 +0.032 +0.102 14 36 16 18 4.5 26 6 2 1 4.5 A180FL-12
More dimensions upon request 16 +0.032 +0.102 18 48 20 24 5.5 34 6 2 1 5.5 A180FL-16
20 +0.040 +0.124 23 60 26 30 6.5 44 10 3 2 7 A180FL-20
25 +0.040 +0.124 28 75 30 35 6.5 55 10 3 2 8.5 A180FL-25
30 +0.040 +0.124 34 90 36 40 8.5 66 10 3 2 10 A180FL-30
35 +0.050 +0.150 39 95 41 55 8.5 77 10 3 2 12 A180FL-35
3)
After press-fit. Testing methods Page 57 13)
Press-fit in H7 tolerance housing bore
556 Online tools and more information www.igus.eu/iglidur-flange 3D-CAD files, prices and delivery time online www.igus.eu/iglidur-flange 557
iglidur®
flange My sketches
bearings
Order key
Zero-clearance and
iglidur® – zero-
clearance and
Type Dimensions
° °
preloaded bearings
60 60
6× 6×
preloaded bearings Options:
Form:
iglidur® JVSM and JVFM bearings are clearance-
S: sleeve
Outer-Ø d2 [mm]
free in unloaded condition due to the axial and/or
Inner-Ø d1 [mm]
b1 b1
iglidur® material
Length b1 [mm]
F: with flange
pre-tensioned
Eliminated clearance in radial pre-load. The iglidur® J material possesses
unloaded condition extremely low coefficients of friction in dry ope
Form S
ration and a very low stick-slip effect. Ideal for d1
Metric
b3 b3
d1
d2
"anti-vibration mounting" of pedal box bearings,
d2
etc.
Dimensions [mm]
d1 d1-Tolerance14) d2 b1 b3 Part No.
E10 h13
Maintenance-free and
predictable service life When to use it? 6.0 +0.020 +0.068 8.0 6.0 2.0 JVSM-0608-06
●● When a radial and/or axial preload of 8.0 +0.025 +0.083 10.0 8.0 2.0 JVSM-0810-08
bearings is required 10.0 +0.025 +0.083 12.0 10.0 2.0 JVSM-1012-10
●● When a rattle free bearing in the unloaded 12.0 +0.032 +0.102 14.0 12.0 2.0 JVSM-1214-12
state is required 14.0 +0.032 +0.102 16.0 14.0 2.0 JVSM-1416-14
●● When you need a zero clearance feel 15.0 +0.032 +0.102 17.0 15.0 2.5 JVSM-1517-15
18.0 +0.032 +0.102 20.0 18.0 2.5 JVSM-1820-18
20.0 +0.040 +0.124 23.0 20.0 2.5 JVSM-2023-20
14)
d1 – Measured after pressfit in housing bore. d2 H7 within the measurement plane
When not to use it?
●● When a bearing solution with reduced Preloaded flange bearings
clearance is needed
please contact us
●● When the preload has to withstand high
radial forces
d3
d1
d2
h0
●● When total zero clearance feature is required
at high loads
b2 b3
r = max. 0.5 mm
Available from stock 2 types b1
Detailed information about delivery time online. Ø 6–20 mm
Dimensions [mm]
More dimensions upon request
Material: d1 d1-Tolerance14) d2 d3 b1 b2 b3 h0 Part No.
E10 h13 ±0.1
iglidur® J Page 141 Imperial dimensions available
From page 1391 8 +0.025 +0.083 10 15 10 1 2.0 0.44 JVFM-0810-10
Max. +90 °C 10 +0.025 +0.083 12 18 10 1 2.0 0.53 JVFM-1012-10
Min. –50 °C 12 +0.032 +0.102 14 20 12 1 2.0 0.53 JVFM-1214-12
14 +0.032 +0.102 16 22 12 1 2.0 0.53 JVFM-1416-12
15 +0.032 +0.102 17 23 15 1 2.5 0.53 JVFM-1517-15
18 +0.032 +0.102 20 26 11 1 2.5 0.53 JVFM-1820-11
18 +0.032 +0.102 20 26 18 1 2.5 0.53 JVFM-1820-18
20 +0.040 +0.124 23 30 20 1.5 2.5 0.62 JVFM-2023-20
14)
d1 – Measured after pressfit in housing bore. d2 H7 within the measurement plane
560 Online tools and more information www.igus.eu/jvsm 3D-CAD files, prices and delivery time online www.igus.eu/jvsm 561
iglidur®
JVSM/ My sketches
JVFM
polysorb –
polymer disc springs
Compensation for axial clearances and
manufacturing tolerances
Vibration dampening
Noise dampening
Corrosion resistant
Lightweight
Electrical and thermal insulation
Standard range from stock
562
polysorb polysorb | Advantages polysorb | Technical data polysorb
When not to use it? The force-deformation curves of polysorb disc springs are 30
Lightweight
●● When constant spring forces are necessary approximately linear.
25
over a wide temperature range
10
Chemical resistance
5
polysorb disc springs are resistant to a variety of chemicals.
iglidur® A500 has a higher resistance than iglidur® J. 0
0 20 40 60 80 100 120 140 160 180 200 220
Ambient temperature [°C]
Medium Resistance
JTEM A500TEM
iglidur® J iglidur® A500
Diagram 02: Effect of ambient temperature on the
Alcohol + +
Available upon request Depending on material: spring force
Hydrocarbons + +
Detailed information about delivery time online. iglidur® J: –50 °C up to +90 °C
Greases, oils without additives + +
iglidur A500: –100 °C up to +250 °C
®
Fuels + +
Material properties:
Diluted acids 0 to – +
iglidur® J Page 141 1 type, 2 materials
Strong acids – +
iglidur A500 Page 355
®
Ø 5–20 mm
Diluted alkalines + +
More dimensions upon request
Strong alkalines + to 0 +
564 Online tools and more information www.igus.eu/polysorb 3D-CAD files, prices and delivery time online www.igus.eu/polysorb 565
polysorb polysorb | Product range
polysorb polymer disc springs
Order key
Options:
iglidur J
®
iglidur A500
®
iglidur® J for low wear
iglidur® material
"Elastic spring"
De FDA-compliant high
temperature applications
Inner-Ø d1
Di
Metric
Material:
t
Dimensions [mm]
Standard values: Weight Part No.15)
spring lengths and forces
De Di t h0 F1.0 iglidur® J F1.0 iglidur® A500
[N] [N] [g]
10.0 5.2 0.5 0.25 5 8 0.04 TEM-05
12.5 6.2 0.7 0.30 10 15 0.11 TEM-06
16.0 8.2 0.9 0.35 16 24 0.20 TEM-08
24 35
iglidur PEP – for all shaft surfaces
20.0 10.2 1.1 0.45 0.33 TEM-10 ®
25.0 12.2 1.5 0.55 45 70 0.85 TEM-12
31.5 16.3 1.75 0.70 65 85 1.44 TEM-16
40.0 20.4 2.25 0.90 130
The standard values for the spring lengths and forces are rounded mean values.
150 3.10 TEM-20
and materials
aterial: iglidur® J, JTEM, Standard
M
15)
Wear [µm/km]
In standard plain bearing solutions, the shaft new path with a plain bearing that is self-contained and
Comb. 1
Comb. 2
Comb. 3
Comb. 4
Comb. 5
Comb. 6
Comb. 7
1.0
has a critical part to play, as important as the maintenance-free.
PEP
0.5
bearing itself. With the iglidur® PEP bearings, iglidur® PEP is an innovative design for lubrication-free poly-
0.0
Cost-effective igus® is forging new trail with this enclosed and mer plain bearing systems with an inner and outer ring. The
Load [MPa]
maintenance-free plain bearing design. special feature; the sliding surface is the inner ring, and for
Wear on outer ring
the first, time shaft materials and shaft surfaces are not a
Wear on inner ring
concern. Even threads, rust and scratches do not affect the
Diagram 01: Wear experiments of different material
Easy to fit performance or reliability. With the control over the sliding
combinations, p = 0.75 MPa, v = 0.3 m/s
When to use it? surface and through considerable testing, the long-term
●● When a low priced polymer plain bearing behaviour of the bearing system can be predicted precisely.
system is required Similar to ball bearings, the inner ring turns with the shaft
Low coefficients of friction ●● When independence from the shaft material in the polymer PEP plain bearing. Relative movements of
0.8
and shaft surface is required the shaft with respect to the bearing are eliminated. This
●● For the protection of expensive and sensitive protects the shaft surface from wear and saves costs. An
0.6
shafts additional benefit; even the most sensitive or unusual mate-
rials can be used as the rotating shaft with this polymer
0.4
plain bearing. Due to the bearing materials used, the PEP
Wear [µm/km]
polymer bearing is totally corrosion free.
0.2
When not to use it?
●● For high surface speeds
0.0
iglidur® J, Page 141 Wear resistance 0.125 0.250 0.500 0.750
●● At high loads For loads up to 5 N/mm2 the wear test results are com- Load [MPa]
iglidur® G, Page 79 pelling. Here PEP polymer bearings obtain values that are iglidur® J plain bearings iglidur® PEP bearings
iglidur® Q, Page 423 comparable to most wear resistant metal-backed bearing Diagram 02: Wear of iglidur PEP bearings as a function
®
●● For high temperatures systems. This is a very positive result, when you consider of the pressure, v = 0.3 m/s
iglidur® V400, Page 273 the reduced costs compared with the required shaft surface
iglidur® X, Page 245 finish which is demanded by traditional bearings. The con-
iglidur® Z, Page 255 sistently low coefficient of friction is also an advantage to the
●● When low clearance bearings are required user. Since the running surfaces are fixed, the tribological Installation
iglidur® P, Page 113 data can be calculated. The coefficients of friction of the The installation of the PEP plain bearing could not be easier
iglidur® X, Page 245 PEP bearings are no longer based on the shaft materials or or faster. The bearings are manufactured to be press fitted
surface properties. If necessary, the coefficients of friction into a recommended housing bore of H7 tolerance. Then,
can be reduced further with a small amount of lubricant. the shaft is inserted and fits tightly onto the inner ring. The
inner bearing is clipped into the outer ring. This design
makes it possible to pull the shaft out without removing the
inner ring.
Available from stock 1 type
Detailed information about delivery time online. Ø 6–20 mm
More dimensions upon request
Material:
iglidur® J Page 141 Imperial dimensions available
From page 1391
Max. +90 °C
Min. –50 °C
568 Online tools and more information www.igus.eu/pep 3D-CAD files, prices and delivery time online www.igus.eu/pep 569
iglidur®
PEP iglidur® PEP | Product range
Sleeve bearings
d2 Order key
b1
30
°
iglidur® type
Outer-Ø d2
d1
Inner-Ø d1
Length b1
Form S
Metric
Material:
iglidur® J Page 141
Dimensions [mm]
d1 d2 b1 Part No.
6 10 10 PEPSM-0610-10
8 12 12 PEPSM-0812-12
10 14 12 PEPSM-1014-12
12 16 15 PEPSM-1216-15
16 20 20 PEPSM-1620-20
20 23 20 PEPSM-2023-20
Order key
Seals against iglidur®-
the rotating shaft
bearing with lip seal
Type Dimensions [mm]
Reduced space Easy and quick to fit polymer plain bearing made
requirement from iglidur® J (JDSM) or iglidur® V400 (VDSM)
with an integrated rotary lip seal, which protects
against dust, dirt, and all depressurised liquids.
iglidur® material
JDSM VDSM
Easy and fast installation
Outer-Ø d2
Inner-Ø d1
Length b1
Form S
Metric
When to use it?
Seal
30°
Can be manufactured ●● When the penetration of dirt and water spray
with different types of seal should be prevented
●● When only a small installation space is Material:
d1
available in the axial direction iglidur® J Page 141
High-temperature version
●● When an existing seal should be integrated in iglidur® V400 Page 273
available (made from
a plain bearing
iglidur® V400)
d2 b3
b1
When not to use it?
●● When pressurised media should be sealed Dimensions [mm]
●● When a permanent tensioned seal is required d1 d1-Tolerance3) d2 b1 b3 f Part No.
E11 Ø h13
10 +0.025 +0.135 15 14 10 1 JDSM-1015-14
10 +0.025 +0.135 15 14 10 1 VDSM-1015-14
3)
After press-fit. Testing methods Page 57
Available upon request Depending on material: Please contact us if you want to combine your seal with an iglidur® bearing. We will support you with the design,
Detailed information about delivery time online. iglidur® J: –50 °C up to +90 °C will check the integration and create an appropriate solution.
iglidur V400: –50 °C up to +200 °C
®
Material properties:
iglidur® J Page 141 1 type, 2 materials
iglidur V400
®
Page 273 Ø 10 mm
More dimensions upon request
572 Online tools and more information www.igus.eu/jdsm 3D-CAD files, prices and delivery time online www.igus.eu/jdsm 573
iglidur®
sealed My sketches
bearing
At igus®, we have the aim of helping our customers reduce costs while bringing technical benefits to How does speedimold work?
their products and machines. We call this "plastics for longer life®". Sometimes our customers require
custom parts or services, and for many years this has been an important part of the igus® support. ●● Youtell us about your required special
Now, with speedimold, we combine custom parts with speed, Using the benefits of igus® Tribo-plastics. design: what kind of material, special
requirements, etc., and send us your 3D
model via email
What is speedimold?
speedimold is primarily simple! Select from 8 iglidur® triboplastics materials (iglidur® G, J, W300, X, M250,
P, A180, H2 and igumid G). Get moulded parts in 1 to 10 days, depending on complexity of the part.
Unable to find the material you desire? Then simply ask us. In addition to the materials that are specially processed
for you using the speedimold procedure, it is naturally also possible to choose from the entire range of iglidur ®
materials in order for us to produce your customised bearing. We work with you to design the bearing, create the
initial prototype and take responsibility for serial production.
576 Online tools and more information www.igus.eu/speedimold 3D-CAD files, prices and delivery time www.igus.eu/speedimold 577
iglidur...
Slewing ring bearings
...
...
...plastics
iglidur® PRT | Product overview
iglidur® PRT – polymer slewing ring bearings
580 581
iglidur PRT –
®
582
iglidur® PRT | Advantages iglidur® PRT | Application examples
Maintenance-free slewing ring bearings
In this machine tool control panel, an iglidur® polymer The iglidur® PRT-01-100 slewing ring bearing is used
Wide range of accessories: Block pricing online
slewing ring bearing is used due to its freedom from in an automatic welding plant in this application.
Special geometries No minimum order value. From batch size 1.
lubrication and maintenance. It enables pivoting in the horizontal plane of the
and accessories
clamping device.
From page 592 Max. +180 °C
Min. –50 °C
3 types
Universal sliding pads: Ø 20–300 mm
Customise your own
slewing ring systems Service life calculation
From page 596 www.igus.eu/prt-expert
584 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 585
iglidur® PRT | Technical data iglidur® PRT | Technical data
Slewing ring bearings general properties Type 01
Type 01
Properties Unit -20 -30 -50 -60 -100 -150 -200 -300
Deflection [°]
0.05
Type 03
Properties Unit -80 0.2
0.01
Weight kg 0.45
Axial load, static (compressive force direction) N 45,000 0.1
0 100 500
Axial load, static (tensile force direction) N 5,000
Axial load, dynamic (compressive force direction) N 12,000 0 Diagram 03: Deflection versus
Axial load, dynamic (tensile force direction) N 2,000 0 500 1,000 1,500 2,000 2,500 3,000 3,500 4,000 4,500 5,000 applied moment
Radial load, static N 4,000 Moment [Nm]
Radial load, dynamic N 1,000
Rotat. speed dry running rpm 120 PRT-01-20 PRT-01-30 PRT-01-50 PRT-01-60 PRT-01-100 PRT-01-150 PRT-01-200 PRT-01-300
Max. perm. tilting moment Nm 120 M4, min. M4, min. M6, min. M5, min. M5, min. M5, min. M6, min. M8, min.
6 screws 8 screws 12 screws 10 screws 12 screws 12 screws 12 screws 12 screws
586 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 587
iglidur®
PRT iglidur® PRT | Product range iglidur® PRT | Product range iglidur®
PRT
Slewing ring bearing, high rigidity – Type 01 Slewing ring bearing with gear teeth
Stainless steel
Slewing Ring
up to +180 °C
Tooth profile
●● 4 standards for outer drive rings are available
Body material
Inner Ø
version
design
Slewing Ring
Sliding pads
– A classic spur gear according to DIN3967
type
– Commercially available belt profiles: T10, AT10, HTD8M
Inner Ø
design
H
S1
●● Outer ring available in stainless steel as an option Detail *
T2
Options:
Stainless steel version ESD-compliant (suffix "-ES")
Body material Sliding pads
d2
D1
d
d1
D
Blank: Aluminium Blank: iglidur® J
R1
T1
●● Aluminium or stainless steel body (upon request) ES: V4A stainless steel H1: iglidur® H1,
R2
K1 B
B
●● Replaceable maintenance-free sliding pads made of high temperature
iglidur® J (Standard) page 141, iglidur® H1 (for F2: iglidur® F2, Dimensions [mm]
S2
h
S1
235 165.0 150 220 25 12x30 ° 16x22.5 ° M5 5.5 ISO 4762 M5 110 96.5 5.5 (36.5) PRT-01-150-TO-...
T2
T2
Detail * 285 215.0 200 274 30 12x30 ° 16x22.5 ° M6 7.0 ISO 4762 M6 137 124.0 7.0 (41.5) PRT-01-200-TO-...
T1
D1
d1
D1
d2
d1
D
430 320.0 300 410 30 12x30 ° 16x22.5 ° M8 9.0 DIN 7984 M8 205 186.5 8.5 (43.5) PRT-01-300-TO-...
d2
d
d
T1
Spur gearing Toothed belt profile Toothed belt profile Toothed belt profile
T1
K1 K1
R1
B
R2
B B
S2
h
S2
Dimensions [mm]
D10) D1 d1 d d2 H h T1 T2 S1 S2 K1 R1 R2 B Part No.
±0.2 for screw
80 70 31 20 60 24 8 6 x 60 ° 6 x 60 ° M4 4.5 DIN 7984 M4 30 20 3.5 PRT-01-20-...
100 91 42.5 30 82 29 10 8 x 45 ° 8 x 45 ° M4 4.5 DIN 7984 M4 41 29 4.5 PRT-01-30-...
150 135 65 50 120 33 10 8 x 45 ° 16 x 22.5 ° M6 6.6 ISO 4762 M6 60 46.5 4.5 PRT-01-50-...
160 145 74 60 130 33 10 10 x 36 ° 20 x 18 ° M5 5.5 ISO 4762 M5 65 51.5 4.5 PRT-01-60-... D m z Part No. D z Part No. D z Part No. D z Part No.
185 170 112 100 160 34 12 12 x 30 ° 16 x 22.5 ° M5 5.5 ISO 4762 M5 80 69 5.5 PRT-01-100-... add-on add-on add-on add-on
250 235 165 150 220 35 12 12 x 30 ° 16 x 22.5 ° M5 5.5 ISO 4762 M5 110 96.5 5.5 PRT-01-150-... (88) – 42 ...-ST (87.25) 28 ...-AT10 (87.25) 28 ...-T10 (81.25) 52 ...-HTD5M
300 285 215 200 274 38 15 12 x 30 ° 16 x 22.5 ° M6 6.6 ISO 4762 M6 137 124 7.0 PRT-01-200-... (112) 2 54 ...-ST (106.4) 34 ...-AT10 (106.4) 34 ...-T10 (110.7) 44 ...-HTD8M
450 430 320 300 410 42 15 12 x 30 ° 16 x 22.5 ° M8 9.0 DIN 7984 M8 205 186.6 7.0 PRT-01-300-... (184) 2 90 ...-ST (163.8) 52 ...-AT10 (163.8) 52 ...-T10 (166.7) 66 ...-HTD8M
10)
Tolerance according to DIN ISO 2768 mK (196) 2 96 ...-ST (189.2) 60 ...-AT10 (189.2) 60 ...-T10 (187.1) 74 ...-HTD8M
(256) 2 126 ...-ST (252.9) 80 ...-AT10 (252.9) 80 ...-T10 (253.3) 100 ...-HTD8M
All stainless steel versions (308) 2 152 ...-ST (303.9) 96 ...-AT10 (303.9) 96 ...-T10 (304.3) 120 ...-HTD8M
upon request (462) 3 152 ...-ST (456.7) 144 ...-AT10 (456.7) 144 ...-T10 (457.1) 180 ...-HTD8M
588 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 589
iglidur®
PRT iglidur® PRT | Product range iglidur® PRT | Product range iglidur®
PRT
Slewing ring bearing, lightweight – Type 02 Slewing ring bearing, low-cost – Type 03
Body material
Slewing Ring
Slewing Ring
Head rings
Inner Ø
Inner Ø
design
design
Options:
Low-cost version Solid plastic version
Body material Head rings iglidur® PRT slewing ring bearing in a low-cost design.
AL: Aluminium Blank: iglidur® J4 Through consistent downsizing, an additional design has Stainless steel
ES: V4A stainless steel A180: iglidur® A180, been created that relies even more on plastic.
LC: Low-cost FDA-compliant ●● Maintenance and lubrication-free
P: Solid plastic ●● Cost-effective and lightweight
iglidur®
●● Low installation space
●● Ready to fit
Anodised
FDA-compliant aluminium
Dimensions [mm]
D D1 d1 d d2 H h T1 T2 S2 K1 K2 Part No.
for screw for screw nut
80 70 31 20 60 16 5 6 x 60 ° 6 x 60 ° 4.5 DIN 6912 M5 ISO 4035 M5 PRT-02-20-
100 91 42.5 30 80 19 6 8 x 45 ° 8 x 45 ° 4.5 DIN 7984 M5 ISO 4035 M5 PRT-02-30-
150 135 65 50 120 20 6 16 x 22.5 ° 8 x 45 ° 6.6 Through hole 6.5 mm PRT-02-50-
160 145 86.0 60 130 30 10 12 x 30 ° 20 x 18 ° 5.5 Counterbore Ø16 and 6.5 deep PRT-02-60- 116)
Only available with body made from aluminium and stainless steel
116)
590 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 591
iglidur®
PRT iglidur® PRT | Product range | Special geometries iglidur® PRT | Product range | Special geometries iglidur®
PRT
Type 01 Type 01
Slewing ring bearing with square flange for direct mounting on flat surfaces Slewing ring bearing with dust seal (-D: one-sided, -DD: both-sided)
d1 H
S2 h2 H X
T2
X
T2
K1
K1
S1
K1
S1
R1
R1
d2
T1
D1
d2
d1
D
d
d2
D
A
E
D1
d1
d
d
B
R2
B B
R2
B
S1
T1
T1
S2
K1
S2
h K1
E h1
h
A H
●● No through-hole necessary Dimensions [mm]
●● No separate distance ring D10) D1 d1 d d2 H h T1 T2 S1 S2 K1 R1 R2 B Part No.
●● Fix with only 4 screws ±0.2 for screw
160 145 74 60 130 33 10 10 x 36° 20 x 18° M5 5.5 ISO 4762 M5 65 51.5 4.5 PRT-01-60-D/DD
Dimensions [mm] 185 170 112 100 160 34 12 12 x 30° 16 x 22.5° M5 5.5 ISO 4762 M5 80 69 5.5 PRT-01-100-D/DD
d d1 d2 D A E H h1 h2 T1 S1 S2 K1 Part No. 10)
Tolerance according to DIN ISO 2768 mK
for screw
20 31 60 62 65 50 26 18 2 6 x 60 ° M4 4.5 DIN 7984 M4 PRT-01-20-SQ
30 42.5 82 84 85 65 30.5 21 1.5 8 x 45 ° M4 4.5 DIN 7984 M4 PRT-01-30-SQ Slewing ring bearing with angle limit function – set the angle limit by yourself
H H Detail
Detail
X X
X X
H Detail X
S1
S1
Slewing ring with collar clamp X
T1
T1
T2
T2
S1
T3
T3
R1
R1
H
D1
D1
d1
d1
d2
d2
D
d
T1
R2
R2
T2
B BB B
T3
R1
D1
d1
d2
S1
d
K1 K1 K1
R2
B B
S2
S2
K1
D1
d1
d2
D
h h
S2
T1
T2
Dimensions [mm]
Angle stops
D D1 d1 d d2 H h T1 T2 S1 S2 K1 Part No.
for screw
●● Easily define the angle of rotation
100 91 42.5 30 82 36 10 6 x 45 ° 8 x 45 ° M4 4.5 DIN 7984 M4 PRT-01-30-C ●● For type 01, size 100
Part No.
PRT-01-100-AA
592 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 593
iglidur®
PRT iglidur® PRT | Product range | Accessories iglidur® PRT | Product range | Accessories iglidur®
PRT
for Type 01 for Type 01
Drive shaft Slewing ring bearing with enlarged outer ring
T1
D1
dz
PRT with
db
hz
dp hp assembled drive
pin
Dimensions [mm] – other dimensions similar to standard type PRT-01 Page 588
Dimensions [mm]
D D1 S2 Part No. 11)
dp hp dz hz D1 T1 db Part No.
205 185 5.5 PRT-01-100-M-ARG
55 5 10 15 42.5 8x45° 4.5 PRT-AZ-30
205 185 M6 PRT-01-100-M-ARGG
90 5 14 15 74 10x36° 5.5 PRT-AZ-60
205 185 5.5 PRT-01-100-M-ARGS
320 300 7.0 PRT-01-200-M-ARG
K1
Manual clamp
D1
K1
D1
T2
w
W
11)
Ending: -G standard, -GG thread- or -GS counterbore
T2
W
H
Dimensions [mm]
D D1 T2 K1 H h gk W Part No.
for screw
Aluminium Plastics PRT with mounted
100 91 45 ° Ø 4.5 8 3.2 M5 60 ° PRT-HK-30 spacing ring
160 145 18 ° DIN 7984 M5 – 10 M6 35 ° PRT-HK-60 Dimensions [mm]
205 185 22.5 ° DIN 7984 M5 – 10 M6 40 ° PRT-HK-10012)
D D1 T2 S2 D3 h1 Part No.39)
320 300 22.5 ° DIN 7984 M6 – 10 M6 40 ° PRT-HK-20012)
80 70 6 x 60 ° 4.5 62 10 PRT-01-20-DR
12)
To be connected only with enlarged outer ring 100 91 8 x 45 ° 4.5 84 11 PRT-01-30-DR
160 145 20 x 18 ° 5.5 132 13 PRT-01-60-DR
185 170 16 x 22.5 ° 5.5 162 13 PRT-01-100-DR
Manual clamp 250 235 16 x 22.5 ° 5.5 222 13 PRT-01-150-DR
300 285 16 x 22.5 ° 7.0 276 13 PRT-01-200-DR
●● For type 01, size 60 450 430 16 x 22.5 ° 9.0 412 15 PRT-01-300-DR
39)
Please add suffix "-POM" for plastic version (not available for sizes 150 and 300)
Part No.
PRT-HK-60-K
594 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 595
iglidur®
PRT iglidur® PRT | Product range | Accessories My sketches iglidur®
PRT
Universal sliding pads
Customise your own slewing ring systems
Using the versatile iglidur® PRT universal slide elements, large slewing ring systems can be tailored to the Type 01. Depending
on the number of elements, slewing ring systems are possible with interior diameters from 0.5 to 5 m. – We will happily
support you with the design and detailed layout.
0.00
3 +- 0.25
0.00
2.5 +- 0.25
0.0
39.5 +- 0.5
Part No.
JRS-500S/45S
596 Online tools and more information www.igus.eu/prt 3D-CAD files, prices and delivery time online www.igus.eu/prt 597
robolink® robolink® D | Robot joints | Product range robolink® D | Robot joints | Product range robolink®
Order key
Slewing ring
bearing
Type Options
on both sides
Installation size
Direct drive
Gear ratio
robolink®
Options
Design
Versions:
robolink® D plastic housing Standard: -01000 3 versions
with two PRT slewing ring bearings Low-cost: -03011 ●● Standard (-01000): 2 pcs aluminium PRT
S2
●● The drive component is a worm gear High end: -01033 (PRT-02-xx-AL), aluminium worm shaft
B2
●● Self-locking drive (AL hard-anodised). Application e.g. in our low-cost
G
●● Light, compact and lubrication-free S1 1 robot arms as front joints (RL-D-20 and RL-D-30).
●● Building blocks: Plastic housing + worm wheel made ●● Low-cost (-03011): 2 pcs low-cost PRT
Ø
G2
from iglidur® J + worm shaft with ball bearings + PRT T (PRT-02-xx-LC), worm shaft made from plastic RN33.
slewing ring bearings + VA screws Application e.g. for manual adjustments.
●● The centre hole remains free for feeding cables ØF ●● High end (-01033): 2 pcs PRT design 01
through (PRT-01-xx), aluminium worm shaft (AL hard-anodised),
H1
●● Adaptable to various motors, standard option: ØP high rigidity.
NEMA17 / 23 / 23XL stepper motor
●● INI kit for zero position optionally adaptable ØS Application e.g. as the first pivoting axis in robolink®
articulated arms.
L1 L2 B1
598 Online tools and more information www.igus.eu/robolink 3D-CAD files, prices and delivery time online www.igus.eu/robolink 599
robolink® robolink® D | Robot joints | Product range robolink® D | Robot joints | Product range robolink®
Asymmetrical – with one PRT slewing ring bearing and cover plate
Order key
Type Options
Slewing ring
bearing
one sided
Installation size
Direct drive
Gear ratio
robolink®
Options
Design
Versions:
robolink® D plastic housing with one PRT Standard: -01004 3 versions
B2
slewing ring bearing and cover plate Low-cost: -03014 ●● Standard (-01004): 1 pc aluminium PRT
B3 S2
●● Self-locking drive High end: -01035 (PRT-02-xx-AL), aluminium worm shaft
●● The drive component is a worm gear S1
(AL hard-anodised). Application e.g. in our low-cost
●● Light, compact and lubrication-free G
1 robot arms as front joints (RL-D-20 and RL-D-30).
●● Building blocks: Plastic housing + worm wheel made ●● Low-cost (-03014): 1 pc low-cost PRT
G2
ØT
from iglidur® J + worm shaft + PRT slewing ring (PRT-02-xx-LC), worm shaft made from plastic RN33.
bearings + axial roller bearings + radial bearings + VA Application e.g. for manual adjustments.
ØF
screws ●● High end (-01035): 1 pc PRT design 01
H1
●● The centre hole remains free for feeding cables (PRT-01-xx), aluminium worm shaft (AL hard-
through ØP anodised), high rigidity.
●● Adaptable to various motors, standard option:
ØS
NEMA17 / 23 / 23XL stepper motor Application e.g. as the first rotating axis in robolink®
L1 L2 B1
●● Application e.g. horizontal on base plate articulated arms.
600 Online tools and more information www.igus.eu/robolink 3D-CAD files, prices and delivery time online www.igus.eu/robolink 601
robolink® robolink® D | Robot joints | Product range robolink® D | Robot joints | Product range robolink®
B1
L2
L1 B2
602 Online tools and more information www.igus.eu/robolink 3D-CAD files, prices and delivery time online www.igus.eu/robolink 603
robolink® robolink® D | Robot joints | Product range robolink® D | Robot joints | Product range robolink®
robolink® D robot joint with direct drive – compact design robolink® D robot joint as gear version
B2
B3 S2
S1
G
1
G2
ØF
H1
ØP
ØS
L1 L2 B1
S
Ø
●● Adaptable to various motors, standard option: ●● Cost-effective alternative without slewing ring bearing
NEMA17 / 23 / 23XL stepper motor ØW ●● Lightweight
B1
●● INI kit for zero position optionally adaptable ●● Replaceable coupling components for different shaft
diameters
L2 B2
L1
604 Online tools and more information www.igus.eu/robolink 3D-CAD files, prices and delivery time online www.igus.eu/robolink 605
iglidur...
round bars, tubes,
plates and tapes
...
...
...plastics
iglidur® bar stock | Product overview
iglidur® round bars – All-rounder iglidur® round bars – Endurance runner
New
iglidur® M250: iglidur® P210: Good iglidur® J4: iglidur® GLW: iglidur® J: iglidur® W300: iglidur® J3: iglidur® J350: Endurance
Excellent vibration coefficients of friction and Wear resistant and cost- Low-cost material for high The versatile endurance The classic endurance Specialist for pulsating runner with high dimensional
dampening wear on almost every shaft effective quantities runner runner up to 30 MPa loads stability at high temperature
Page 618 Page 618 Page 619 Page 619 Page 620 Page 620 Page 621 Page 621
iglidur® round bars – Endurance runner iglidur® round material – For high temperatures ... – High media resistance
iglidur® J260: iglidur® R: iglidur® J200: iglidur® JB: iglidur® X: iglidur® HSD350: iglidur® H1 : iglidur® C500:
Ideal for plastic shafts Low-cost Specially for aluminium Extreme wear resistant The chemical and All-rounder suitable for Endurance runner with For extreme
shafts in black temperature specialist steam sterilisation high media resistance ambient conditions
Page 622 Page 622 page 623 Page 623 Page 624 Page 624 page 625 Page 625
iglidur® round material – For contact with food iglidur® round material – For contact with food
iglidur® A181: The food all- iglidur® A350: The FDA- iglidur® A500: The media ilgidur® A180: iglidur® A160: "Food" iglidur® UW160: iglidur® T220:
rounder, compliant with FDA compliant endurance and temperature specialist The food all-rounder material with high media For contact with drinking For the tobacco industry
and EC directive 10/2011 runner at high temperatures in the food sector resistance up to +90 °C water
Page 626 Page 626 Page 627 Page 627 Page 628 Page 628 Page 629
iglidur® round material – For special applications iglidur® tubes Mechanical processing
iglidur® J: iglidur® JB: iglidur® A350: The FDA- Material iglidur® A160: Material iglidur® B160: Material iglidur® W160: Material iglidur® V400:
The versatile endurance Extreme wear resistant compliant endurance runner FDA-compliant For use in visible areas Lubrication-free Tribo-Tape Extremely high wear
runner in black at higher temperatures in white – hardly any wear resistance
Page 632 Page 633 Page 633 Page 640 Page 641 Page 642 Page 643
608 609
iglidur bar stock
®
610
iglidur® bar stock | Advantages iglidur® bar stock | Product overview
Round bars and plates for free design Round bars and plates for free design
612 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 613
iglidur® materials | Selection according to main criteria
iglidur® M250 P210 J4 GLW J W300 J3 J350 J260 R J200 JB X HSD350 H1 C500 A181 A350 A500 A180 A160 UW160 T220 F2 J2 RW370 W160 B160 V400
Descriptive technical specifications
Wear resistance
at +23°C
Wear resistance
at +90 °C
Wear resistance
at +150 °C
Low coefficients of
friction
Low moisture
absorption
Wear resistance
under water
High media
resistance
Edge
pressure
Resistant to impacts/
shock
Resistant to dirt
Price index141)
Corrosion free
Electrically conductive
FDA- and/or
EC10/2011 compliant
Fire class in
V-2 HB F HB HB HB HB V-0 V-2 HB HB HB V-0 V-0 V-0 V-0 HB V-0 V-1 HB HB HB HB HB HB V-0 HB HB V-0
accordance with UL-94
Availabilities / variants
Stock plate
Tribo-Tape
141)
Price index
614 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 615
iglidur® bar stocks | Material properties table
iglidur® Unit M250 P210 J4 GLW J W300 J3 J350 J260 R J200 JB X HSD350 H1 C500 A181 A350 A500 A180 A160 UW160 T220 F2 J2 RW370
General properties
Density [g/cm3] 1.14 1.40 1.48 1.36 1.49 1.24 1.42 1.44 1.35 1.39 1.72 1.49 1.44 1.39 1.53 1.37 1.38 1.42 1.28 1.46 1.00 1.04 1.28 1.52 1.44 1.34
Colour
Max. water absorption [% weight] 7.6 0.5 1.3 5.5 1.3 6.5 1.3 1.6 0.4 1.1 0.7 1.3 0.5 1.2 0.3 0.5 1.3 1.9 0.5 1.3 0.1 0.1 0.5 0.4 1.3 1.2
Coefficient of sliding friction, 0.18– 0.07– 0.06– 0.10– 0.06– 0.08– 0.06– 0.10– 0.06– 0.09– 0.11– 0.06– 0.09– 0.07– 0.06– 0.07– 0.10– 0.10– 0.26– 0.05– 0.09– 0.17– 0.20– 0.16– 0.11– 0.13–
[µ]
dynamic, against steel 0.40 0.19 0.20 0.24 0.18 0.23 0.20 0.20 0.20 0.25 0.17 0.18 0.27 0.23 0.20 0.19 0.21 0.20 0.41 0.23 0.19 0.31 0.32 0.22 0.27 0.17
pv value, max. (dry) [MPa · m/s] 0.12 0.4 0.30 0.30 0.34 0.23 0.5 0.45 0.35 0.27 0.3 0.34 1.32 0.3 0.80 0.7 0.31 0.40 0.28 0.31 0.25 0.22 0.28 0.31 0.23 1.2
Mechanical properties
Flexural modulus [MPa] 2,700 2,500 2,350 7,700 2,400 3,500 2,700 2,000 2,200 1,950 2,800 2,400 8,100 2,150 2,800 3,000 1,913 2,000 3,600 2,300 1,151 1,349 1,800 7,418 3,605 2,997
Flexural strength at +20 °C [MPa] 112 70 70 235 73 125 70 55 60 70 58 73 170 67 55 100 48 110 140 88 19 22 65 93 101 100
Shore-D-Hardness 79 75 74 78 74 77 73 80 77 77 70 74 85 77 77 81 76 76 83 76 60 60 76 72 n.s. 80
Thermal conductivity [W/m · K] 0.24 0.25 0.25 0.24 0.25 0.24 0.25 0.24 0.24 0.25 0.24 0.25 0.60 0.24 0.24 0.24 0.25 0.24 0.24 0.25 0.30 0.50 0.24 0.61 0.25 n.s.
Coefficient of thermal
[K–1 · 10–5] 10 8 10 17 10 9 13 7 13 11 8 10 5 7 6 9 11 8 9 11 11 18 11 5 7 n.s.
expansion at +23°C
Electrical properties
Specific contact resistance [Ωcm] > 1013 > 1012 > 1013 > 1011 > 1013 > 1013 > 1012 > 1013 > 1012 > 1012 > 108 > 1013 < 105 > 1013 > 1012 > 1014 > 1012 > 1011 > 1014 > 1012 > 1012 > 1012 > 1010 < 109 > 1013 > 1012
Surface resistance [Ω] > 1011 > 1011 > 1013 > 1011 > 1012 > 1012 > 1012 > 1010 > 1010 > 1012 > 108 > 1012 < 103 > 1014 > 1011 > 1013 > 1012 > 1011 > 1013 > 1011 > 1012 > 1012 > 1010 < 109 > 1012 > 1012
Page 618 618 619 619 620 620 621 621 622 622 623 623 624 624 625 625 626 626 627 627 628 628 629 629 630 630
616 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 617
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
Excellent vibration dampening – iglidur® M250 Wear resistant and cost-effective – iglidur® J4
Order key for round bars Order key for round bars
16)
Length
iglidur® material
iglidur® material
in mm from
100 to 1,000, Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
graduated from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm graduated in
steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRM250-1000- 16)
45 100–1,000 SFRM250-4500- 16)
10 100–1,000 SFRJ4-1000- 16)
45 100–1,000 SFRJ4-4500-
16)
15 100–1,000 SFRM250-1500- 16)
50 100–1,000 SFRM250-5000- 16)
15 100–1,000 SFRJ4-1500-
16)
50 100–1,000 SFRJ4-5000-
16)
20 100–1,000 SFRM250-2000-
16)
55 100–1,000 SFRM250-5500- 16)
20 100–1,000 SFRJ4-2000- 16)
55 100–1,000 SFRJ4-5500- 16)
25 100–1,000 SFRM250-2500-
16)
60 100–1,000 SFRM250-6000- 16)
25 100–1,000 SFRJ4-2500-
16)
60 100–1,000 SFRJ4-6000- 16)
30 100–1,000 SFRM250-3000-
16)
65 100–1,000 SFRM250-6500- 16)
30 100–1,000 SFRJ4-3000-
16)
65 100–1,000 SFRJ4-6500- 16)
35 100–1,000 SFRM250-3500-
16)
80 100–1,000 SFRM250-8000- 16)
35 100–1,000 SFRJ4-3500-
16)
80 100–1,000 SFRJ4-8000- 16)
40 100–1,000 SFRM250-4000-
16)
100 100–1,000 SFRM250-10000- 16)
40 100–1,000 SFRJ4-4000-
16)
100 100–1,000 SFRJ4-10000- 16)
Good coefficients of friction and wear on almost every shaft – iglidur® P210 Low-cost material for high quantities – iglidur® GLW
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur® material
iglidur® material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRP210-1000- 16)
45 100–1,000 SFRP210-4500- 16)
10 100–1,000 SFRGLW-1000-
16)
45 100–1,000 SFRGLW-4500-
16)
15 100–1,000 SFRP210-1500-
16)
50 100–1,000 SFRP210-5000- 16)
15 100–1,000 SFRGLW-1500-
16)
50 100–1,000 SFRGLW-5000- 16)
20 100–1,000 SFRP210-2000-
16)
55 100–1,000 SFRP210-5500- 16)
20 100–1,000 SFRGLW-2000-
16)
55 100–1,000 SFRGLW-5500- 16)
25 100–1,000 SFRP210-2500-
16)
60 100–1,000 SFRP210-6000- 16)
25 100–1,000 SFRGLW-2500-
16)
60 100–1,000 SFRGLW-6000- 16)
30 100–1,000 SFRP210-3000-
16)
65 100–1,000 SFRP210-6500- 16)
30 100–1,000 SFRGLW-3000-
16)
65 100–1,000 SFRGLW-6500- 16)
35 100–1,000 SFRP210-3500-
16)
80 100–1,000 SFRP210-8000- 16)
35 100–1,000 SFRGLW-3500-
16)
80 100–1,000 SFRGLW-8000- 16)
40 100–1,000 SFRP210-4000-
16)
100 100–1,000 SFRP210-10000- 16)
40 100–1,000 SFRGLW-4000-
16)
100 100–1,000 SFRGLW-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
618 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 619
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
The versatile endurance runner – iglidur® J Specialist for pulsating loads – iglidur® J3
Order key for round bars Order key for round bars
iglidur® material
iglidur® material
Length in mm
16)
Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
from 100 to 1,000, from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
graduated in graduated in
100 mm steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ-1000- 16)
45 100–1,000 SFRJ-4500- 16)
10 100–1,000 SFRJ3-1000- 16)
45 100–1,000 SFRJ3-4500-
16)
15 100–1,000 SFRJ-1500-
16)
50 100–1,000 SFRJ-5000-
16)
15 100–1,000 SFRJ3-1500-
16)
50 100–1,000 SFRJ3-5000-
16)
20 100–1,000 SFRJ-2000- 16)
55 100–1,000 SFRJ-5500- 16)
20 100–1,000 SFRJ3-2000- 16)
55 100–1,000 SFRJ3-5500- 16)
25 100–1,000 SFRJ-2500-
16)
60 100–1,000 SFRJ-6000- 16)
25 100–1,000 SFRJ3-2500-
16)
60 100–1,000 SFRJ3-6000- 16)
30 100–1,000 SFRJ-3000-
16)
65 100–1,000 SFRJ-6500- 16)
30 100–1,000 SFRJ3-3000-
16)
65 100–1,000 SFRJ3-6500- 16)
35 100–1,000 SFRJ-3500-
16)
80 100–1,000 SFRJ-8000- 16)
35 100–1,000 SFRJ3-3500-
16)
80 100–1,000 SFRJ3-8000- 16)
40 100–1,000 SFRJ-4000-
16)
100 100–1,000 SFRJ-10000- 16)
40 100–1,000 SFRJ3-4000-
16)
100 100–1,000 SFRJ3-10000- 16)
The classic endurance runner up to 30 MPa – iglidur® W300 Endurance runner with high dimensional stability at high temperature – iglidur® J350
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur material
iglidur® material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
®
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRW-1000-
16)
45 100–1,000 SFRW-4500-
16) 10 100–1,000 SFRJ350-1000- 16)
45 100–1,000 SFRJ350-4500-
16)
15 100–1,000 SFRW-1500-
16)
50 100–1,000 SFRW-5000- 16) 15 100–1,000 SFRJ350-1500-
16)
50 100–1,000 SFRJ350-5000- 16)
20 100–1,000 SFRW-2000-
16)
55 100–1,000 SFRW-5500- 16) 20 100–1,000 SFRJ350-2000-
16)
55 100–1,000 SFRJ350-5500- 16)
25 100–1,000 SFRW-2500-
16)
60 100–1,000 SFRW-6000- 16) 25 100–1,000 SFRJ350-2500-
16)
60 100–1,000 SFRJ350-6000- 16)
30 100–1,000 SFRW-3000-
16)
65 100–1,000 SFRW-6500- 16) 30 100–1,000 SFRJ350-3000-
16)
65 100–1,000 SFRJ350-6500- 16)
35 100–1,000 SFRW-3500-
16)
80 100–1,000 SFRW-8000- 16) 35 100–1,000 SFRJ350-3500-
16)
80 100–1,000 SFRJ350-8000- 16)
40 100–1,000 SFRW-4000-
16)
100 100–1,000 SFRW-10000- 16) 40 100–1,000 SFRJ350-4000-
16)
100 100–1,000 SFRJ350-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
620 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 621
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
Ideal for plastic shafts – iglidur® J260 Specially for aluminium shafts – iglidur® J200
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur® material
iglidur® material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRJ260-1000- 16)
45 100–1,000 SFRJ260-4500- 16)
10 100–1,000 SFRJ200-1000- 16)
45 100–1,000 SFRJ200-4500-
16)
25 100–1,000 SFRJ260-2500-
16)
60 100–1,000 SFRJ260-6000- 16)
25 100–1,000 SFRJ200-2500-
16)
60 100–1,000 SFRJ200-6000- 16)
30 100–1,000 SFRJ260-3000-
16)
65 100–1,000 SFRJ260-6500- 16)
30 100–1,000 SFRJ200-3000-
16)
65 100–1,000 SFRJ200-6500- 16)
35 100–1,000 SFRJ260-3500-
16)
80 100–1,000 SFRJ260-8000- 16)
35 100–1,000 SFRJ200-3500-
16)
80 100–1,000 SFRJ200-8000- 16)
40 100–1,000 SFRJ260-4000-
16)
100 100–1,000 SFRJ260-10000- 16)
40 100–1,000 SFRJ200-4000-
16)
100 100–1,000 SFRJ200-10000- 16)
Order key for round bars Order key for round bars
iglidur® material
Length in mm
16)
Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
from 100 to 1,000, from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
graduated in graduated in
100 mm steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRR-1000- 16)
45 100–1,000 SFRR-4500- 16)
10 100–1,000 SFRJB-1000-
16)
45 100–1,000 SFRJB-4500-
16)
15 100–1,000 SFRR-1500-
16)
50 100–1,000 SFRR-5000- 16)
15 100–1,000 SFRJB-1500-
16)
50 100–1,000 SFRJB-5000- 16)
20 100–1,000 SFRR-2000-
16)
55 100–1,000 SFRR-5500- 16)
20 100–1,000 SFRJB-2000-
16)
55 100–1,000 SFRJB-5500- 16)
25 100–1,000 SFRR-2500-
16)
60 100–1,000 SFRR-6000- 16)
25 100–1,000 SFRJB-2500-
16)
60 100–1,000 SFRJB-6000- 16)
30 100–1,000 SFRR-3000-
16)
65 100–1,000 SFRR-6500- 16)
30 100–1,000 SFRJB-3000-
16)
65 100–1,000 SFRJB-6500- 16)
35 100–1,000 SFRR-3500-
16)
80 100–1,000 SFRR-8000- 16)
35 100–1,000 SFRJB-3500-
16)
80 100–1,000 SFRJB-8000- 16)
40 100–1,000 SFRR-4000-
16)
100 100–1,000 SFRR-10000- 16)
40 100–1,000 SFRJB-4000-
16)
100 100–1,000 SFRJB-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
622 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 623
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
The chemical and temperature specialist – iglidur® X Endurance runner with high media resistance – iglidur® H1
Order key for round bars Order key for round bars
iglidur® material
iglidur® material
Length in mm
16)
Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
from 100 to 1,000, from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
graduated in graduated in
100 mm steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRX-1000- 16)
45 100–1,000 SFRX-4500- 16)
10 100–1,000 SFRH1-1000- 16)
45 100–1,000 SFRH1-4500-
16)
15 100–1,000 SFRX-1500-
16)
50 100–1,000 SFRX-5000- 16)
15 100–1,000 SFRH1-1500-
16)
50 100–1,000 SFRH1-5000-
16)
20 100–1,000 SFRX-2000-
16)
55 100–1,000 SFRX-5500- 16)
20 100–1,000 SFRH1-2000- 16)
55 100–1,000 SFRH1-5500- 16)
25 100–1,000 SFRX-2500-
16)
60 100–1,000 SFRX-6000- 16)
25 100–1,000 SFRH1-2500-
16)
60 100–1,000 SFRH1-6000- 16)
30 100–1,000 SFRX-3000-
16)
65 100–1,000 SFRX-6500- 16)
30 100–1,000 SFRH1-3000-
16)
65 100–1,000 SFRH1-6500- 16)
35 100–1,000 SFRX-3500-
16)
80 100–1,000 SFRX-8000- 16)
35 100–1,000 SFRH1-3500-
16)
80 100–1,000 SFRH1-8000- 16)
40 100–1,000 SFRX-4000-
16)
100 100–1,000 SFRX-10000- 16)
40 100–1,000 SFRH1-4000-
16)
100 100–1,000 SFRH1-10000- 16)
All-rounder suitable for steam sterilisation – iglidur® HSD350 For extreme ambient conditions – iglidur® C500
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur® material
iglidur material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
®
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRHSD350-1000-
16)
45 100–1,000 SFRHSD350-4500-
16)
10 100–1,000 SFRC500-1000-
16)
45 100–1,000 SFRC500-4500-
16)
15 100–1,000 SFRHSD350-1500-
16)
50 100–1,000 SFRHSD350-5000- 16)
15 100–1,000 SFRC500-1500-
16)
50 100–1,000 SFRC500-5000- 16)
20 100–1,000 SFRHSD350-2000-
16)
55 100–1,000 SFRHSD350-5500- 16)
20 100–1,000 SFRC500-2000-
16)
55 100–1,000 SFRC500-5500- 16)
25 100–1,000 SFRHSD350-2500-
16)
60 100–1,000 SFRHSD350-6000- 16)
25 100–1,000 SFRC500-2500-
16)
60 100–1,000 SFRC500-6000- 16)
30 100–1,000 SFRHSD350-3000-
16)
65 100–1,000 SFRHSD350-6500- 16)
30 100–1,000 SFRC500-3000-
16)
65 100–1,000 SFRC500-6500- 16)
35 100–1,000 SFRHSD350-3500-
16)
80 100–1,000 SFRHSD350-8000- 16)
35 100–1,000 SFRC500-3500-
16)
80 100–1,000 SFRC500-8000- 16)
40 100–1,000 SFRHSD350-4000-
16)
100 100–1,000 SFRHSD350-10000- 16)
40 100–1,000 SFRC500-4000-
16)
100 100–1,000 SFRC500-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
624 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 625
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
The food all-rounder, compliant with FDA-compliant and EC directive The media and temperature specialist in the food sector – iglidur® A500
10/2011 – iglidur® A181
Order key for round bars
Order key for round bars
Type Dimensions [mm]
Type Dimensions [mm]
16)
Length
iglidur® material
16)
Length in mm from
iglidur® material
in mm from 100 to 1,000,
Bar stock
Length16)
100 to 1,000, graduated
Outer Ø
Inner Ø
Round
Bar stock
Length16)
graduated in 100 mm
Outer Ø
Inner Ø
Round
in 100 mm steps
steps Dimensions [mm]
Dimensions [mm] Ø Lengths16) Part No. Ø Lengths16) Part No.
Ø Lengths 16)
Part No. Ø Lengths 16)
Part No. 10 100–1,000 SFRA500-1000- 16)
45 100–1,000 SFRA500-4500-
16)
10 100–1,000 SFRA181-1000- 16)
45 100–1,000 SFRA181-4500- 16)
15 100–1,000 SFRA500-1500- 16)
50 100–1,000 SFRA500-5000- 16)
15 100–1,000 SFRA181-1500-
16)
50 100–1,000 SFRA181-5000- 16)
20 100–1,000 SFRA500-2000-
16)
55 100–1,000 SFRA500-5500- 16)
20 100–1,000 SFRA181-2000-
16)
55 100–1,000 SFRA181-5500- 16)
25 100–1,000 SFRA500-2500-
16)
60 100–1,000 SFRA500-6000- 16)
25 100–1,000 SFRA181-2500-
16)
60 100–1,000 SFRA181-6000- 16)
30 100–1,000 SFRA500-3000-
16)
65 100–1,000 SFRA500-6500- 16)
30 100–1,000 SFRA181-3000-
16)
65 100–1,000 SFRA181-6500- 16)
35 100–1,000 SFRA500-3500-
16)
80 100–1,000 SFRA500-8000- 16)
35 100–1,000 SFRA181-3500-
16)
80 100–1,000 SFRA181-8000- 16)
40 100–1,000 SFRA500-4000-
16)
100 100–1,000 SFRA500-10000- 16)
40 100–1,000 SFRA181-4000-
16)
100 100–1,000 SFRA181-10000- 16)
The FDA-compliant endurance runner at high temperatures – iglidur® A350 The food all-rounder – iglidur® A180
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur® material
iglidur® material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA350-1000- 16)
45 100–1,000 SFRA350-4500- 16)
10 100–1,000 SFRA180-1000- 16)
45 100–1,000 SFRA180-4500-
16)
15 100–1,000 SFRA350-1500-
16)
50 100–1,000 SFRA350-5000-
16)
15 100–1,000 SFRA180-1500-
16)
50 100–1,000 SFRA180-5000- 16)
20 100–1,000 SFRA350-2000-
16)
55 100–1,000 SFRA350-5500-
16)
20 100–1,000 SFRA180-2000-
16)
55 100–1,000 SFRA180-5500- 16)
25 100–1,000 SFRA350-2500-
16)
60 100–1,000 SFRA350-6000- 16)
25 100–1,000 SFRA180-2500-
16)
60 100–1,000 SFRA180-6000- 16)
30 100–1,000 SFRA350-3000-
16)
65 100–1,000 SFRA350-6500- 16)
30 100–1,000 SFRA180-3000-
16)
65 100–1,000 SFRA180-6500- 16)
35 100–1,000 SFRA350-3500-
16)
80 100–1,000 SFRA350-8000- 16)
35 100–1,000 SFRA180-3500-
16)
80 100–1,000 SFRA180-8000- 16)
40 100–1,000 SFRA350-4000-
16)
100 100–1,000 SFRA350-10000- 16)
40 100–1,000 SFRA180-4000-
16)
100 100–1,000 SFRA180-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
626 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 627
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars | Product range iglidur®
bar stock
"Food" material with high media resistance up to +90 °C – iglidur® A160 For the tobacco industry – iglidur® T220
Order key for round bars Order key for round bars
16)
Length 16)
Length
iglidur® material
iglidur® material
in mm from in mm from
100 to 1,000, 100 to 1,000,
Bar stock
Bar stock
Length16)
Length16)
graduated graduated
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm in 100 mm
steps steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRA160-1000- 16)
45 100–1,000 SFRA160-4500- 16)
10 100–1,000 SFRT220-1000- 16)
45 100–1,000 SFRT220-4500-
16)
15 100–1,000 SFRA160-1500- 16)
50 100–1,000 SFRA160-5000- 16)
15 100–1,000 SFRT220-1500- 16)
50 100–1,000 SFRT220-5000- 16)
20 100–1,000 SFRA160-2000-
16)
55 100–1,000 SFRA160-5500- 16)
20 100–1,000 SFRT220-2000-
16)
55 100–1,000 SFRT220-5500- 16)
25 100–1,000 SFRA160-2500-
16)
60 100–1,000 SFRA160-6000- 16)
25 100–1,000 SFRT220-2500-
16)
60 100–1,000 SFRT220-6000- 16)
30 100–1,000 SFRA160-3000-
16)
65 100–1,000 SFRA160-6500- 16)
30 100–1,000 SFRT220-3000-
16)
65 100–1,000 SFRT220-6500- 16)
35 100–1,000 SFRA160-3500-
16)
80 100–1,000 SFRA160-8000- 16)
35 100–1,000 SFRT220-3500-
16)
80 100–1,000 SFRT220-8000- 16)
40 100–1,000 SFRA160-4000-
16)
100 100–1,000 SFRA160-10000- 16)
40 100–1,000 SFRT220-4000-
16)
100 100–1,000 SFRT220-10000- 16)
For contact with drinking water – iglidur® UW160 Used to prevent electro-static charges – iglidur® F2
Order key for round bars Order key for round bars
16)
Length
iglidur® material
iglidur® material
in mm from
100 to 1,000, Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
graduated from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
Round
in 100 mm graduated in
steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRUW160-1000- 16)
45 100–1,000 SFRUW160-4500- 16)
10 100–1,000 SFRF2-1000-
16)
45 100–1,000 SFRF2-4500-
16)
15 100–1,000 SFRUW160-1500-
16)
50 100–1,000 SFRUW160-5000- 16)
15 100–1,000 SFRF2-1500-
16)
50 100–1,000 SFRF2-5000- 16)
20 100–1,000 SFRUW160-2000-
16)
55 100–1,000 SFRUW160-5500- 16)
20 100–1,000 SFRF2-2000-
16)
55 100–1,000 SFRF2-5500- 16)
25 100–1,000 SFRUW160-2500-
16)
60 100–1,000 SFRUW160-6000- 16)
25 100–1,000 SFRF2-2500-
16)
60 100–1,000 SFRF2-6000- 16)
30 100–1,000 SFRUW160-3000-
16)
65 100–1,000 SFRUW160-6500- 16)
30 100–1,000 SFRF2-3000-
16)
65 100–1,000 SFRF2-6500- 16)
35 100–1,000 SFRUW160-3500-
16)
80 100–1,000 SFRUW160-8000- 16)
35 100–1,000 SFRF2-3500-
16)
80 100–1,000 SFRF2-8000- 16)
40 100–1,000 SFRUW160-4000-
16)
100 100–1,000 SFRUW160-10000- 16)
40 100–1,000 SFRF2-4000-
16)
100 100–1,000 SFRF2-10000- 16)
Available from stock igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
Produced to special order diameter is not available.
628 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 629
iglidur®
bar stock iglidur® round bars | Product range iglidur® round bars and tubes | Product range iglidur®
bar stock
Versatile and cost-effective – iglidur® J2 The versatile endurance runner – iglidur® J
iglidur® material
iglidur® material
Length in mm
16)
Length in mm
16)
Bar stock
Bar stock
Length16)
Length16)
from 100 to 1,000, from 100 to 1,000,
Outer Ø
Outer Ø
Inner Ø
Inner Ø
Round
graduated in graduated in
Tube
100 mm steps 100 mm steps
Dimensions [mm] Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No. Inner Ø Inner diameter Outer Ø Outer diameter Length16) Part No.
10 100–1,000 SFRJ2-1000- 16)
45 100–1,000 SFRJ2-4500- 16)
tolerance tolerance
15 100–1,000 SFRJ2-1500-
16)
50 100–1,000 SFRJ2-5000-
16)
70 –2.0 / –6.5 110 +1.5 / +4.5 100–1,000 SFTJ-11070
20 100–1,000 SFRJ2-2000- 16)
55 100–1,000 SFRJ2-5500- 16)
70 –2.0 / –6.5 125 +1.5 / –2.0 100–1,000 SFTJ-12570
25 100–1,000 SFRJ2-2500-
16)
60 100–1,000 SFRJ2-6000- 16)
100 –2.0 / –6.5 150 +1.5 / +4.5 100–1,000 SFTJ-150100
30 100–1,000 SFRJ2-3000-
16)
65 100–1,000 SFRJ2-6500- 16)
35 100–1,000 SFRJ2-3500-
16)
80 100–1,000 SFRJ2-8000- 16)
40 100–1,000 SFRJ2-4000-
16)
100 100–1,000 SFRJ2-10000- 16)
16)
Length
iglidur material
in mm from
100 to 1,000,
Bar stock
Length16)
graduated
Outer Ø
Inner Ø
®
Round
in 100 mm
steps
Dimensions [mm]
Ø Lengths16) Part No. Ø Lengths16) Part No.
10 100–1,000 SFRRW370-1000-
16)
45 100–1,000 SFRRW370-4500-
16)
15 100–1,000 SFRRW370-1500-
16)
50 100–1,000 SFRRW370-5000- 16)
20 100–1,000 SFRRW370-2000-
16)
55 100–1,000 SFRRW370-5500- 16)
25 100–1,000 SFRRW370-2500-
16)
60 100–1,000 SFRRW370-6000- 16)
30 100–1,000 SFRRW370-3000-
16)
65 100–1,000 SFRRW370-6500- 16)
35 100–1,000 SFRRW370-3500-
16)
80 100–1,000 SFRRW370-8000- 16)
igus® constantly expands its range of available materials and dimensions. Please contact us in case the required
40 100–1,000 SFRRW370-4000-
16)
100 100–1,000 SFRRW370-10000- 16)
diameter is not available.
630 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 631
iglidur®
bar stock iglidur® plates | Product range iglidur® plates | Product range iglidur®
bar stock
The versatile endurance runner – iglidur® J Extreme wear resistant in black – iglidur® JB
Material thickness
Material thickness
iglidur® material
iglidur® material
Bar stock
Bar stock
Length
Length
Width
Width
Plate
Plate
L L
s s
B B
Dimensions Material thickness s Part No. Tolerances Dimensions Material thickness s Part No. Tolerances
(L x W) Material thickness Tolerance (L x W) Material thickness Tolerance
500x240 2/4/6 SFPJ--500-240 2 +0.000 +0.200 500x300 10 / 25 SFPJB--500-300 10 +0.200 +0.900
500x300 10 / 15 / 20 / 25 / 30 / 40 SFPJ--500-300 4 +0.000 +0.250 500x610 10 / 25 SFPJB--500-610 25 +0.300 +1.500
500x500 2/4/6 SFPJ--500-500 6 +0.000 +0.300 1,000x610 10 / 25 SFPJB--1000-610
500x610 10 / 15 / 20 / 25 / 30 / 40 SFPJ--500-610 10 +0.200 +0.900
1,000x500 2/4/6 SFPJ--1000-500 15 +0.300 +1,500
1,000x610 10 / 15 / 20 / 25 / 30 / 40 SFPJ--1000-610 20 +0.300 +1,500
1,000x1,000 2/4/6 SFPJ--1000-1000 25 +0.300 +1,500
30 +0.500 +2,500
40 +0.500 +2,500 The FDA-compliant endurance runner at higher temperatures – iglidur® A350
632 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 633
iglidur® bar stock | Processing information iglidur® bar stock | Online tools & speedicut
Processing information for iglidur® bar stock Special parts fast, machined to drawing
634 Product finder online www.igus.eu/barstock-finder Service life calculation online www.igus.eu/barstock-expert 635
iglidur®
bar stock My sketches
iglidur Tribo-Tape
®
Choice of 4 materials
Lubrication and maintenance-free
Wear-resistant
Easy to cut
Can be glued
Standard widths from stock
Material properties
Material: iglidur® A160
iglidur off the reel:
®
General properties Unit iglidur® iglidur® iglidur® iglidur® Testing
●● Low coefficients of
friction
Tribo-Tape Density g/cm3
A160
1.00
B160
1.00
W160
0.95
V400
1.51
method
638 Online tools and more information www.igus.eu/tribotape 3D-CAD files, prices and delivery time online www.igus.eu/tribotape 639
iglidur®
Tribo-Tape iglidur® Tribo-Tape | Product range iglidur® Tribo-Tape | Product range iglidur®
Tribo-Tape
FDA-compliant – iglidur® A160 For use in visible areas – iglidur® B160
G= G=
with adhesive with adhesive
iglidur® material
iglidur® material
Adhesive back
Adhesive back
back back
Thickness
Thickness
Width
Width
Tape
Tape
The low-cost iglidur® A160 tape has very high Tribo-Tape from iglidur® A160 with adhesive back Especially where the iglidur® Tribo-Tape is a visible Tribo-Tape from iglidur® B160 with adhesive back
wear resistance compared to similar, thin plastic Temperature –40 °C up to +90 °C part, the new black option now offers even more Temperature –40 °C up to +90 °C
films. creative freedom. Furthermore the wear resistance
compared to variants made of iglidur® A160 has
been improved once again.
Individual widths upon request Cutting service Individual widths upon request Cutting service
Continuously from 20–500 mm Design Tribo-Tape flexibly Continuously from 20–500 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape www.igus.eu/custom-tape
6 6
5 5
4 4
Wear/Weight decrease
Wear/Weight decrease
3 3
2 2
PTFE- PTFE-
iglidur® A160 iglidur® B160
[mg/km]
[mg/km]
0 0
Linear wear against stainless steel pin (1.4305) Linear wear against stainless steel pin (1.4305)
F = 10 N, v = 9,600 mm/min F = 10 N, v = 9,600 mm/min
iglidur® A160 material complies with EC Directive 10/2011 EC and also with FDA
(Food and Drug Administration) specifications for repeated contact with food.
640 Online tools and more information www.igus.eu/tribotape 3D-CAD files, prices and delivery time online www.igus.eu/tribotape 641
iglidur®
Tribo-Tape iglidur® Tribo-Tape | Product range iglidur® Tribo-Tape | Product range iglidur®
Tribo-Tape
Antibacterial – iglidur® W160 High media resistance – iglidur® V400
G= G=
with with adhesive
iglidur® material
iglidur® material
Adhesive back
Adhesive back
adhesive back
back
Thickness
Thickness
Width
Width
Tape
Tape
With its white colour and UV-stabilised additives, the Tribo-Tape from iglidur® W160 with adhesive back iglidur® V400 tape is not only extremely wear Tribo-Tape from iglidur® V400 with adhesive back
iglidur® W160 Tribo-Tape offers even more design Temperature –40 °C up to +90 °C resistant but also extremely media and temperature Temperature –40 °C up to +200 °C
freedom as a visual part. The anti-bacterial feature resistant. In fact, it has been proven in tests to be
also offers advantages in areas like medical up to 10 times more wear resistant than special
technology, where hygiene is critical. products for machine beds.
Individual widths upon request Cutting service Individual widths upon request Cutting service
Continuously from 20–500 mm Design Tribo-Tape flexibly Continuously up to 120 mm Design Tribo-Tape flexibly
www.igus.eu/custom-tape www.igus.eu/custom-tape
6 30
5 25
4 20
Wear/Weight decrease
Wear/Weight decrease
3 15
2 10
PTFE- PTFE-bronze
iglidur® W160 iglidur® V400
[mg/km]
[mg/km]
0 0
Linear wear against stainless steel pin (1.4305) Linear wear against stainless steel pin (1.4305)
F = 10 N, v= 9600 mm/min F = 35 N, v = 0.5 m/min
642 Online tools and more information www.igus.eu/tribotape 3D-CAD files, prices and delivery time online www.igus.eu/tribotape 643
iglidur...
Tribo 3D printing
...plastics
iglidur®
iglidur tribo 3D printing | Advantages
®
iglidur SLS | Laser sintering ® tribo
3D printing
Parts as required – everything a question of quantity iglidur® for 3D printing by laser sintering
646 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 647
iglidur® iglidur®
tribo iglidur tribo 3D printing | 3D printing service
® tribo
3D printing 3D printing
Individual wearing parts in 3 days – order online
Delivery time
From 24 hrs up to 3 business days
650 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 651
iglidur® iglidur®
tribo iglidur Tribo-Filament | Tested
®
iglidur Tribo-Filament | Test results
® tribo
3D printing 3D printing
Printed as good as injection-moulded
3D print filament impresses during tests Parts made of iglidur® Tribo-Filament with the 3D printing moulded", the 3D printed iglidur® bearings are comparable
with injection moulding quality method or parts made of iglidur® I3 with the SLS method to conventionally made bearings in respect of wear-
are much more wear-resistant than standard 3D materials. resistance.
Our iglidur® J260 Tribo-Filament is more wear-resistant than The following tests also show that, "printed and injection-
standard print material. Our series of tests show: printed
plain bearings from our latest filament iglidur® J260 are
20
equally as wear resistant as our injection-moulded parts
from the same material. The tests have also proven that
15
iglidur® 3D print filaments have considerably lower coef-
ficients of friction and are up to 50 times more abrasion-
800
600
200
50 50
45 45 0
40 40
ABS PA12 iglidur® iglidur® iglidur® iglidur®
35 35 (FDM) (SLS) I180 J260 I3 W300
30 30 (FDM) (FDM) (SLS) moulded
Wear rate [µm/km]
25 25
20 20
Wear, rotating p = 20 MPa; v = 0.01 m/s, V2A iglidur® I3 iglidur® I180
15 15
10 10
5 50.3 fail 0.9 1.6 0.8 1.3 5 94.8 163.4 1.9 0.5 0.6 0.3
0 0 300
ABS iglidur
®
iglidur
®
ABS iglidur
®
iglidur
®
150
Rotating wear: p=1 MPa; v=0.3 m/s Linear wear: p = 1 MPa; v = 0.3 m/s; l = 5 mm
100
ABS printed iglidur® I180
50
0
iglidur® iglidur® iglidur® iglidur®
I3 I180 G W300
printed printed moulded moulded
652 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 653
iglidur® iglidur®
tribo iglidur Tribo-Filament | Product range
®
iglidur Tribo-Filament | Product range
® tribo
3D printing 3D printing
iglidur® material
Tribo-Filament
Tribo-Filament
Ø [mm · 100]
Ø [mm · 100]
iglidur® I150 iglidur® I180
654 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 655
iglidur® iglidur®
tribo iglidur Tribo-Filament | Product range
®
iglidur Tribo-Filament | Product range
® tribo
3D printing 3D printing
iglidur® material
Tribo-Filament
Tribo-Filament
Ø [mm · 100]
Ø [mm · 100]
iglidur® J260 iglidur® I170
iglidur® J260 – Extremely long service life iglidur® I170 – optimised service life
●● Outstanding abrasion-resistance of Tribo-Filaments ●● Improved abrasion-resistance
●● Application temperature from –100 °C to +120 °C ●● Application temperature: +80 °C
●● For experts: high-quality processing ●● For experts: high-quality processing
●● Recommended printing surface: igus® adhesive film ●● Recommended printing surface: igus® adhesive film
Material properties
General properties Unit iglidur® iglidur®
J260 I170
Density g/cm3 1.35 1.21
Colour yellow yellow
Max. moisture absorption at +23 °C/50 % r.h. % weight 0.2 0.5
Max. water absorption % weight 0.4 1.6
Mechanical properties
Flexural modulus MPa 1,000 1,000
Tensile strength at +20 °C MPa 41/13 130)
33/17130)
Shore-D hardness 66 64
Physical and thermal properties
Max. long-term application temperature °C +120 +75
Max. short-term application temperature °C +140 +85 Processing and accessories Complete processing instructions
Min. application temperature °C –100 –40 Page 659 online www.igus.eu/tribofilament
Electrical properties
Specific contact resistance Ωcm > 1012 > 1012 Part No. adhesive film for print bed
Surface resistance Ω > 1010 > 1011 PF-01-0203-0203 (203 x 203 mm)
Table 01: Material properties table 130)
Printed flat/upright PF-01-0254-0228 (254 x 228 mm)
656 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 657
iglidur® iglidur®
tribo iglidur Tribo-Filament | Product range
®
iglidur Tribo-Filament | Processing and accessories
® tribo
3D printing 3D printing
Tribo-Filament
Ø [mm · 100]
iglidur® C210
Material properties
General properties Unit iglidur®
C210 Spool Example: Part No. Test kits
Density g/cm3 1.40 iglidur® Tribo-Filaments weighing 250 g are wound onto I150-PF-0175-0025
Colour white a spool with an outer diameter of 105 mm, a width of for 25 g of filament, loose with 1.75 mm diameter
Max. moisture absorption at +23 °C/50 % r.h. % weight 0.3 55 mm. It has an inner diameter of 55 mm. Test kits with 25 g made of the iglidur® material I150
Max. water absorption % weight 0.7 filament are also available; this is not wound onto a spool.
Mechanical properties
Flexural modulus MPa 1,600 Filament thickness
Tensile strength at +20 °C MPa 38/30130) The iglidur® Tribo-Filaments are available with 1.75 mm and
Shore-D hardness 70 3 mm thickness. The 3 mm filaments can be used without
Physical and thermal properties problems in 3D printers that need a 2.85 mm filament.
Max. long-term application temperature °C +100
Max. short-term application temperature °C +180 3x more material
Min. application temperature °C –30 With the bigger spool size, each spool contains 750 g fila-
Electrical properties ment (300 m filament in 1.75 mm diameter or 90 m filament
Specific contact resistance Ωcm > 1013 in 3 mm diameter).
Surface resistance Ω > 1012
Table 01: Material properties table 130)
Printed flat/upright
658 Online tools and more information www.igus.eu/tribo-printing Prices and delivery time online www.igus.eu/tribofilament 659
iglidur® iglidur®
tribo iglidur | Injection moulding tools
®
My sketches tribo
3D printing 3D printing
Making tools quickly and at low cost
Delivery time
from 4 business days
www.igus.eu/3d-tools
660 More information www.igus.eu/3d-tools Prices and delivery time online www.igus.eu/3d-tools 661
igubal...
Polymer spherical bearings
..
...plastics
igubal® Application examples: igubal®
LIMELIGHT BV
(Stadium panelling)
igubal® spherical bearings of dimensional series K are owing to their freedom from maintenance, corrosion RESEARCH INSTITUTE SPECIAL-PURPOSE VEHICLE
used in the main bearing assembly of every individual resistance and atmospheric resistance. Since these Mirror adjustment of the telescope is performed virtu- Resistant to dirt and maintenance-free: the rugged
slat due to their freedom from maintenance, corro- slats can be swivelled, this allows the air flow inside ally free of backlash with igubal® rod ends. Magnetic clevises and spherical bearings never give in on the
sion resistance igubal® spherical bearings are used the stadium to be regulated. influences can be avoided. special-purpose municipal vehicles.
in the main bearing assembly of every individual slat Product: igubal® spherical bearings KGLM-08 (Max-Planck institute for physics and astrophysics) (Multicar Spezialfahrzeuge GmbH)
Classic Design Integrated lock nut Selectable ball material For small space For temperatures Classic Design For higher forces
for easy assembly requirement, selectable up to +200 °C
ball material
Page 678 Page 680 Page 682 Page 688 Page 692 Page 684 Page 686
igubal® rod end bearings with male thread igubal® angled and in-line joints igubal® angled and in-line joints
For small space For temperatures Angled ball and Angled ball and Easy assembly In-line ball and socket In-line ball and socket
requirement, up to +200 °C socket joint socket joint, low-cost and disassembly joint joint, low-cost
selectable ball material
Page 690 Page 693 Page 694 Page 695 Page 696 Page 697 Page 698
igubal® clevis joint combinations igubal® clevis joint combinations ... ... and single components
Clevis joints with Clevis joints with Clevis joint- Clevis joint with Clevis joint, high Spring-loaded Clevis pin and circlip
clevis pin and circlip springloaded combination spring-loaded pin rigidity fixing clip
fixing clip
Page 706 Page 707 Page 708 Page 709 Page 704 Page 710 Page 711
Easy to disassemble, Easy installation For quick assembly and Split housing with For diameters Extremely light, Split pillow block bearing
split housing and ball low moisture absorption parallel bore up to 150 mm compact design for square profiles
Page 720 Page 721 Page 722 Page 723 Page 724 Page 725 Page 726
igubal® pillow block bearings – standard design igubal® flange bearings for supporting the centre or ends of shafts
Compensation of Easy to fit For higher radial load Universal and quick Universal and quick
misalignments errors assembly, female thread assembly, male thread
Page 718 Page 732 Page 734 Page 736 Page 737
666 667
igubal® selection | Product overview
igubal® flange bearings for supporting the centre or ends of shafts igubal® spherical bearings
High static load, For temperatures For temperatures Standard, easy to fit Easy to fit, For extremely narrow Space saving
split housing up to +200 °C up to +200 °C cost-effective installation space
Page 738 Page 739 Page 740 Page 746 Page 747 Page 748 Page 749
Cost-effective, selectable Simply snap For high axial and Tolerance compensation, Simply snap into sheet
ball material into sheet metal radial loads selectable ball material metal, can be assembled
on both sides
Page 750 Page 751 Page 752 Page 753 Page 754
igubal® double joints igubal® spherical thrust bearings igubal® spherical balls ...
Solid polymer Selectable materials, Removable, Selectable materials, To prevent edge loads Standard, with low wear Cost effective,
individual dimensions selectable materials individual dimensions good wear resistance
Page 755 Page 756 Page 757 Page 758 Page 762 Page 767 Page 768
igubal® spherical balls – different material options igubal® spherical balls – different material options
For temperatures Low moisture Cost-effective and low For underwater Clearance-free Detectable For metallic bearing
up to +250 °C absorption moisture absorption applications housings
Page 769 Page 770 Page 772 Page 773 Page 774 Page 775 Page 776
Ball stud, Ball stud, Adapter bolt Adapter for dimensional Rod ends Clevis joints and Spherical balls
female thread male thread with circlip series E spring-loaded fixing clip
Page 778 Page 779 Page 780 Page 781 Page 786 Page 788 Page 775
668 669
igubal® igubal® spherical bearings | Advantages igubal® spherical bearings | Technical data igubal®
Self-aligning maintenance-free spherical bearings made from high-performance polymers Loads (HT) versions can be used at continuous temperatures
The load capacity of the maintenance-free igubal bearing ®
up to +200 °C. Diagram 01 trends indicate the effect of
igubal® is a system of self-aligning bearing elements com- Further to the standard material iglidur® W300, spherical
element parts is very high at normal ambient temperatures. temperature on the load capacity of igubal® bearings with
pletely made from plastic. igubal® puts a complete system of balls are now available in 7 other materials presenting
igubal® bearings absorb high forces and weigh only one standard and high temperature materials.
self-aligning bearings – spherical bearings, pillow block sphe- particular advantages:
fifth of traditional, metal bearing housings. The excellent
rical bearings and rod ends – at the developer’s fingertips. ●● iglidur® X for high temperatures igubal® Application Temperature
dampening properties are based on the fact that the
Self-aligning bearings are easy to fit, adapt to all angular ●● iglidur® J for low moisture absorption Standard HT-Version
polymer material of the two part bearing can absorb
deviations and replace special housings in many cases. ●● iglidur® J4 for low moisture absorption at lower costs Minimum –30 °C –40 °C
vibrations differently than steel.
With igubal®, the user can take advantage of all the benefits ●● iglidur® R as a low-cost alternative Max. long-term +80 °C +200 °C
However, plastic specific properties, such as dependence
of high performance polymers. They can be used in dry ●● iglidur® UW for under water applications Maximum, short-term +120 °C +240 °C
on temperature and behaviour under long-term stress, must
operation and have excellent vibration dampening proper- ●● iglidur® RN248 as detectable material
be taken into consideration when using igubal® bearings. Table 01: Application temperatures of igubal® bearings
ties. They are resistant to dirt, can operate in liquids and ●● iglidur® J4V with clearance free spherical balls
The load capacity of the rod end should therefore be
even in chemicals and are completely resistant to corrosion.
Spherical balls, page 763 checked in a practical test, particularly if it will be used Thread description Pitch [mm]
The weight of the igubal® parts is approx. 80 % lighter
under continuous high loads and at elevated temperatures. M2 0.40
than comparable steel parts. Additional savings are cost- Do not hesitate to ask for technical support concerning the
M3 0.50
savings at the time of purchasing and during operation. choice of the material.
100 M4 0.70
igubal® bearings are also extremely cost competitive due to
670 Online tools and more information online www.igubal.eu 3D-CAD files, prices and delivery time online www.igubal.eu 671
igubal® igubal® | Technical data
Radiation resistance
Self-aligning igubal® bearings are resistant to radiation up Tolerance test with plug
to an intensity of 3 · 102 Gy. gauge
igubal® rod ends can also be used in rough environments. They are corrosion-resistant in humid Typical sectors of industry
environments and resistant to weak acids and bases. Depending on the version (HT) the operation and application areas
temperature is from –40 °C up to +200 °C. Rod ends are also resistant to dirt and dust, they are also ● Bicycle manufacturing ● Plant design
available as detectable version. ● Packaging ● Offshore etc.
Maintenance-free,
When to use it?
dry-running
●● If you want to save weight
●● For rotating, oscillating and linear movements
●● If high-frequency oscillations/vibrations occur
●● If silent operation is required
High rigidity ●● If you need an electrically insulating part
●● If corrosion resistance is required Improve technology and reduce costs –
●● In combination with pneumatic cylinders and 110 exciting examples online
gas struts www.igus.eu/igubal-applications
●● If chemical resistance is required
High durability
●● If high stiffness is required
●● If they should be detectable
www.igus.eu/special-bikes www.igus.eu/textile
Lightweight
Max. + 200 °C
Min. –40 °C
(depending on material: Standard –30 °C up to
+80 °C; HT –40 °C up to +200 °C)
18 types
Ø 2–30 mm
674 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 675
igubal®
rod ends igubal® rod ends | Technical data igubal® rod ends | Product overview igubal®
rod ends
igubal® rod end bearings with female thread
Advantages Coefficients of sliding friction and speed
●● Maintenance-free, dry operation Rotary movements of a mounted shaft take place directly in
●● High rigidity the spherical portion, made from iglidur® W300. In metallic
●● Very high durability in varying loads rod ends, rotary motion takes place between the race and
●● Compensation of misalignment errors the spherical bearing. Taking the radial loads into account,
●● Compensation of edge loads maximum surface speeds up to 0.5 m/s rotating can be
●● Resistant to dirt, dust and lint attained. Classic design Easy assembly Selectable ball Space saving For Classic design, For small space
●● Resistant to corrosion and chemicals The maintenance-free igubal® rod end bearings permit linear material temperatures imperial requirement,
up to +200 °C dimensions imperial dimensions
●● High vibration-dampening and oscillating movements of the shaft.
Dimensional Dimensional Dimensional Dimensional Dimensional Dimensional Dimensional
●● Suitable for rotating, oscillating and linear movements series K series K series K series E series E series K series E
●● Lightweight
From page 678 Page 680 Page 682 Page 688 Page 692 Page 1452 Page 1450
●● Dimensional series K and E, according to standard Temperatures
DIN ISO 12240 The igubal® rod ends can be used in temperatures from igubal® rod end bearings with male thread
●● Available with a stainless steel sleeve to take a higher –30 °C up to +80 °C. The igubal® rod ends made from
tightening torque HT-Material are suitable for temperatures up to +200 °C
(Series E, types A and B).
Product range
igubal® rod ends are available in the dimensional series Tolerances
K and E for shaft diameters of 2 to 30 mm according to igubal ® rod ends can be used at different tolerances
Classic design For higher Space saving For tempera Classic design,
standard DIN ISO 12240 depending on the individual application. They are designed forces tures up imperial
with a large clearance in the standard product, which to +200 °C dimensions
●● Form A – with male thread and enables a secure operation even under high peripheral Dimensional Dimensional Dimensional Dimensional Dimensional
●● Form B – with female thread speeds. The bore of the spherical ball is produced to a series K series K series E series E series K
standard tolerance range E10. Shafts should also meet From page 684 Page 686 From page 690 Page 693 From page 1451
recommended tolerances h6 and h9. Please contact us in
igubal® angled and in-line joints
Stainless steel sleeve case you require lower or other bearing tolerances.
The dimensional series K and partially E are available in
imperial dimensions, as well as a special version contai-
ning a stainless steel sleeve in the inner race. This allows a Pivot angle
significantly higher tightening torque than for the standard
polymer race. Please ask us for more dimensions.
α
Angled ball Angled ball Easy In-line ball and In-line ball and
Loads and socket joint and socket joint, assembly and socket joint socket joint, low-cost
low-cost disassembly
igubal® rod ends handle high loads at normal room tem
peratures, have excellent dampening properties and weigh Page 694 Page 695 Page 696 Page 697 Page 698
only a fifth of traditional metallic rod ends. In applications igubal® accessories for rod ends
with high continuous loads and high temperatures, the
load capacity of igubal® rod ends should be tested in an
experiment that simulates the application.
www.igus.eu/igubal-finder
Clevis joints with clevis pin Clevis joints with Detectable Rod end
and circlip springloaded fixing clip bearings and clevis joints
Dimensional series E Dimensional series E
Page 706 Page 707 From page 783
676 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 677
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends with female thread: Rod ends with female thread:
KBRM and KBLM KBRM and KBLM Order key
●● Maintenance-free, dry operation
●● High rigidity B Type Size [mm] Options
d2
●● Very high durability in varying loads C1
●● Compensation of misalignment errors
●● Compensation of edge loads Thread
●● Resistant to dirt, dust and lint L: left-hand thread
Dimensional series K
●● High vibration-dampening
I2
●● Suitable for rotating, oscillating and linear movements
h1
●● Lightweight
●● Dimensional series K according to standard
Inner Ø
I1
Thread
Metric
DIN ISO 12240
Standard design Stainless steel sleeve
●● Available with a stainless steel sleeve to take a higher d3
version (MH) d4
tightening torque d5 W
Material:
Lifetime calculation online ●● Adapter bolt with circlip available
Housing: igumid G Page 1496
www.igus.eu/igubal-expert Accessories, page 780
Spherical ball: iglidur® W300 Page 153
678 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 679
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends, female thread; 2nd generation: Rod ends, female thread; 2nd generation:
KBRM CL and KBLM CL KBRM CL and KBLM CL Order key
B
d2 Type Size [mm] Version Options
●● Available with a stainless steel sleeve to take a higher C1
tightening torque
●● Dimensional series K according to standard Thread
DIN ISO 12240 L: left-hand
d1
Dimensional series K
h3
Accessories, page 780 R: right-hand
l2
2nd generation
h2
thread
h1
l1
Inner Ø
Thread
Metric
m
d3
Lifetime calculation online Simple assembly due to the hexagonal body and the Material:
W
www.igus.eu/igubal-expert integrated lock nut. Housing: igumid G Page 1496
Spherical ball: iglidur® W300 Page 153
More spherical ball materials upon request
Page 763
680 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 681
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends with female thread: Rod ends with female thread:
KCRM and KCLM KCRM and KCLM Order key
d1
R: right-hand thread
Dimensional series K
●● Corrosion resistant
●● Available with a stainless steel sleeve to take a higher
I2
tightening torque available
h1
●● Dimensional series K according to standard
Inner Ø
Thread
DIN ISO 12240
Metric
l1
●● Adapter bolt with circlip available
Accessories, page 780
d3
Lifetime calculation online Material:
www.igus.eu/igubal-expert W Housing: igumid G Page 1496
Spherical ball: iglidur® W300 Page 153
More spherical ball materials upon request
Page 763
682 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 683
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends with male thread: Rod ends with male thread:
KARM and KALM KARM and KALM Order key
●● Maintenance-free, dry operation
B
Type Size [mm] Options
●● High rigidity d2 C1
●● Very high tensile strength for varying loads
●● Compensation of misalignment errors
Thread
●● Compensation of edge loads
d1
L: left-hand thread
●● Resistant to dirt, dust and lint
Dimensional series K
●● Resistant to corrosion and chemicals
I2
●● High vibration-dampening
h1
●● Suitable for rotating, oscillating and linear movements
I1
●● Lightweight
Inner Ø
Thread
●● Dimensional series K according to standard
Metric
DIN ISO 12240
Standard design Stainless steel sleeve d3
●● Available with a stainless steel sleeve to take a higher
version (MH)
tightening torque Material:
●● Adapter bolt with circlip available Housing: igumid G Page 1496
Lifetime calculation online Accessories, page 780 Spherical ball: iglidur® W300 Page 153
www.igus.eu/igubal-expert
Imperial dimensions available
Page 1451
684 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 685
igubal®
rod ends igubal® rod ends | Product range My sketches igubal®
rod ends
d1
Right-hand thread
h1
2nd generation
I1
Inner Ø
Metric
d3
Technical data
Part No. Max. static Max. static Min. Max. Max. tightening Weight
tensile strength axial force thread tightening torque
depth torque through ball
without with
Short- Long- Short- Long- Thread male stainless stainless
term term term term thread steel sleeve steel sleeve
[N] [N] [N] [N] [mm] [Nm] [Nm] [Nm] [g]
KARM-06 CL 1,000 500 100 50 15 0.5 10 15 3.5
KARM-08 CL 1,700 850 200 100 18 2.0 12 40 6.2
KARM-10 CL 2,500 1,250 300 150 20 5.0 20 50 11.2
KARM-12 CL 2,700 1,350 400 200 22 6.0 30 70 15.6
Dimensions [mm]
Part No. d1 d2 d3 C1 B h1 l1 l2 Max.
E10 without stainless with stainless pivot
steel sleeve steel sleeve
angle
+0.2
KARM-06 CL 06 20 M06 7.0 9.0 9.2 36 21 46 40 °
KARM-08 CL 08 24 M08 9.0 12.0 12.2 42 25 55 35 °
KARM-10 CL 10 30 M10 10.5 14.0 14.2 48 28 63 35 °
KARM-12 CL 12 34 M12 12.0 16.0 16.2 54 32 71 35 °
Rod ends can be ordered in metric dimensions with stainless steel insert with the addition of MH after the part numbers
listed here. Example: KARM-10 CL MH (Inner-Ø: 10 mm).
For another spherical bearing material than iglidur® W300, please add J or R to the part number. Example: KARM-10 CL J.
686 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 687
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends with female thread: Rod ends with female thread:
EBRM and EBLM EBRM and EBLM Order key
●● Maintenance-free, dry operation
Type Size [mm] Options
●● High rigidity
B
●● Very high durability in varying loads d2 C1
●● Compensation of misalignment errors
Thread
●● Compensation of edge loads
L: left-hand thread
Dimensional series E
d1
●● Resistant to corrosion and chemicals
●● High vibration-dampening
l2
●● Suitable for rotating, oscillating and linear movements
h1
●● Lightweight
Inner Ø
Thread
●● Dimensional series E according to DIN ISO 12240
Metric
l1
●● For temperatures up to +200 °C we recommend
EARM-HT and EALM-HT Page 692 d3
d4
●● Detectable version Page 787 W Material:
d5
Lifetime calculation online Housing: igumid G Page 1496
www.igus.eu/igubal-expert Spherical ball: iglidur® W300 Page 153
More spherical ball materials upon request
Page 763
688 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 689
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Rod ends with male thread: Rod ends with male thread:
EARM and EALM EARM and EALM Order key
●● Maintenance-free, dry operation
Type Size [mm] Options
●● High rigidity B
●● Very high durability in varying loads
d2 C1
●● Compensation of misalignment errors
Thread
●● Compensation of edge loads
L: left-hand thread
●● Resistant to dirt, dust and lint
d1
Dimensional series E
●● Resistant to corrosion and chemicals
●● High vibration-dampening
I2
●● Suitable for rotating, oscillating and linear movements
h1
●● Lightweight
Inner Ø
Thread
●● Dimensional series E according to DIN ISO 12240
Metric
I1
●● For temperatures up to +200 °C we recommend
EARM-HT and EALM-HT Page 693
Lifetime calculation online d3 Material:
www.igus.eu/igubal-expert Housing: igumid G Page 1496
Spherical ball: iglidur® W300 Page 153
More spherical ball materials upon request
Page 763
690 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 691
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
High temperature rod ends with female High temperature rod ends with male
thread: EBRM-HT and EBLM-H T Order key thread: EARM-HT and EALM-HT Order key
B B
d2 C1 Type Size [mm] Version Options d2 C1 Type Size [mm] Version Options
Thread Thread
d1
d1
L: left-hand L: left-hand
Dimensional series E
Dimensional series E
l2
I2
R: right-hand R: right-hand
High temperature
High temperature
h1
h1
thread thread
I1
l1
Inner Ø
Inner Ø
Thread
Thread
Metric
Metric
d3
d4
W d3
d5
692 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 693
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Angled ball and socket joint: Angled ball and socket joint (low-cost):
WGRM and WGLM Order key WGRM LC and WGLM LC Order key
socket joint
galvanised steel and stainless
MS: ball studs made
Low-cost
steel19)
Inner Ø
Thread
from galvanised steel19)
Metric
Accessories, page 777
ES: ball stud made from
Inner Ø
Thread
Stainless steel28)
Metric
●● Housing with ball stud Options: Ball stud
d4 ●● Lightweight Thread Blank: plastic stud
Material: ●● Maintenance-free L: left-hand thread MS: ball studs made from
S1
Housing: igumid G Page 1496 ●● Ball studs made from plastic, galvanised steel R: right-hand thread galvanised steel19)
Spherical cap: iglidur® W300 Page 153 and stainless steel19) Accessories, page 777 ES: ball studs made from
b Ø d1 l5 stainless steel28)
a e
S1
d2
h2
I1
I2
I6
694 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 695
igubal®
rod ends igubal® rod ends | Product range igubal® rod ends | Product range igubal®
rod ends
Thread
L: left-hand thread
Disassembly
socket joint
●● Cost-effective ball joint from galvanised steel19)
Inner Ø
Thread
●● Lightweight ES: ball stud made from
Metric
Inner Ø
Thread
●● Corrosion resistant Stainless steel28)
Metric
●● Easy assembly (75 N) and disassembly
●● High holding forces when assembled (260 N) Options:
●● Ball studs made from plastic, galvanised steel and Thread Ball stud S1 Material:
d4 d2
stainless steel19) Accessories, page 777 L: left-hand thread Blank: plastic stud Housing: igumid G Page 1496
R: right-hand thread MS: ball studs made from Spherical cap: iglidur® W300 Page 153
Material: galvanised steel19)
e
a
Housing: igumid G Page 1496 ES: ball studs made from
b
stainless steel28) ●● For all mechanical combinations
h3
1
ø d1
l1
S1 ●● Maintenance-free, predictable service life
●● Resistant to corrosion and chemicals
l2
l3
●● High vibration-dampening
h1
d2
e
stainless steel19)
h3
l5
Accessories, page 777
l2
l6
S2
d2
696 Online tools and more information online www.igus.eu/rod-end 3D-CAD files, prices and delivery time online www.igus.eu/rod-end 697
igubal®
rod ends igubal® rod ends | Product range
Low-cost
Inner Ø
Thread
Metric
S1
d4 Options:
d2
Thread Ball stud
L: left-hand thread Blank: plastic stud
R: right-hand thread MS: ball studs made from
e
a
galvanised steel19)
b
stainless steel28)
ød1
l1
Material:
l2
l3
igubal® clevis joints are all made from igumid G to DIN 71752, which can be used in combination with Typical sectors of industry
series E rod ends. Available components are clevis joint, clevis pin and clip or as an alternative, spring- and application areas
loaded pin. Detectable version available. ● Food industry ● Packaging
● Heavy Duty ● Automotive
● Renewable energy ● Automation etc.
Noise-dampening
When not to use it?
●● If temperatures are higher than +200 °C
●● If diameters above 20 mm are required
Can be used in combination with
series E rod ends
Lightweight
www.igus.eu/food www.igus-packaging.eu
Max. +80 °C
Min. –30 °C
4 types
Ø 4–20 mm
700 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 701
igubal® igubal®
clevis igubal clevis joints | Product overview
®
My sketches clevis
joints joints
Clevis joints with clevis Clevis joints with spring- Combination, Combination,
pin and circlip loaded fixing clip easy to fit easy to fit
Dimensional series E Dimensional series E Dimensional series E Dimensional series E
Page 706 Page 707 Page 708 Page 709
702 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 703
igubal® igubal®
clevis igubal clevis joints | Product range
®
igubal clevis joints | Product range
® clevis
joints joints
Clevis joint: GERM and GELM Clevis joint: GERM and GELM
Order key
d1
Type Size [mm] Options
●● Lightweight b1
●● High rigidity
●● Absolute corrosion resistance
Thread
●● High tensile forces
L: left-hand thread
●● Can be used in combination with series E rod ends
R: right-hand thread
Dimensional series E
●● Vibration-dampening
I2
h1
●● Noise-dampening
●● Available with left- (GELM) and right-hand-thread (GERM)
Clevis joint
I1
Inner Ø
Thread
Metric
d2
a1
d3
Lifetime calculation online Material:
www.igus.eu/igubal-expert igumid G Page 1496
a2
704 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 705
igubal® igubal®
clevis igubal clevis joints | Product range
®
igubal clevis joints | Product range
® clevis
joints joints
Clevis joints with clevis pin and circlip: Clevis joints with spring-loaded fixing clip:
GERMK and GELMK Order key GERMF and GELMF Order key
Thread Thread
Dimensional series E
Dimensional series E
Clevis pin and circlip
thread thread
R: right-hand R: right-hand
thread thread
Clevis joint
Clevis joint
Inner Ø
Inner Ø
Thread
Thread
Metric
Metric
●● Lightweight ●● One-piece design
●● Absolute corrosion resistance ●● Easy assembly/disassembly
●● High tensile forces Material: ●● Easy assembly also for use in hard to reach locations Material:
●● Can be used in combination with series E rod ends igumid G Page 1496 ●● Can be used in combination with series E rod ends igumid G Page 1496
●● Corrosion resistant and lightweight
Lifetime calculation online Lifetime calculation online
www.igus.eu/igubal-expert www.igus.eu/igubal-expert
Right-hand thread Left-hand thread [N] [N] [N] [N] [g] Right-hand thread Left-hand thread [N] [N] [N] [N] [g]
GERMK-04 M3.5 GELMK-04 M3.5 500 250 250 125 1.3 GERMF-04 M3.5 GELMF-04 M3.5 500 250 250 125 1.3
GERMK-04 GELMK-04 500 250 250 125 1.3 GERMF-04 GELMF-04 500 250 250 125 1.3
GERMK-05 DIN M4 GELMK-05 DIN M4 800 400 250 125 2.1 GERMF-05 DIN M4 GELMF-05 DIN M4 800 400 250 125 2.3
GERMK-05 DIN M5 GELMK-05 DIN M5 800 400 250 125 2.1 GERMF-05 DIN M5 GELMF-05 DIN M5 800 400 250 125 2.3
GERMK-05 GELMK-05 900 450 250 125 3.3 GERMF-05 DIN M5 LS22) GELMF-05 DIN M5 LS22) 800 400 250 125 2.3
GERMK-05 DIN M5 LS22) GELMK-05 DIN M5 LS22) 800 400 130 65 2.9 GERMF-05 GELMF-05 900 450 250 125 3.8
GERMK-06 GELMK-06 1,300 650 300 150 3.3 GERMF-06 GELMF-06 1,300 650 300 150 3.9
GERMK-06 LS22) GELMK-06 LS22) 1,300 650 130 65 4.4 GERMF-06 LS22) GELMF-06 LS22) 1,300 650 130 65 3.9
GERMK-08 GELMK-08 2,100 1,050 650 325 7.9 GERMF-08 GELMF-08 2,100 1,050 650 325 9.1
GERMK-10 GELMK-10 3,000 1,500 800 400 16.4 GERMF-10 GELMF-10 3,000 1,500 800 400 18.2
GERMK-10 F GELMK-10 F 3,000 1,500 800 400 16.4 GERMF-10 F GELMF-10 F 3,000 1,500 800 400 18.2
GERMK-12 GELMK-12 3,500 1,750 900 450 25.3 GERMF-12 GELMF-12 3,500 1,750 900 450 28.6
GERMK-12 F GELMK-12 F 3,500 1,750 900 450 25.3 GERMF-12 F GELMF-12 F 3,500 1,750 900 450 28.6
GERMK-14 GELMK-14 6,100 3,050 1,000 500 31.2 GERMF-16 GELMF-16 7,000 3,500 1,200 600 61.8
GERMK-15 GELMK-15 2,800 1,400 1,000 500 38.9 GERMF-16 F GELMF-16 F 7,000 3,500 1,200 600 61.8
GERMK-16 GELMK-16 7,000 3,500 1,200 600 60.8 22)
LS = longer shank
GERMK-16 F GELMK-16 F 7,000 3,500 1,200 600 60.8
GERMK-17 GELMK-17 3,600 1,800 1,200 600 62.3
GERMK-17 F GELMK-17 F 3,600 1,800 1,200 600 62.3
GERMK-20 GELMK-20 9,000 4,500 3,000 1,500 125.2 Single components: spring-loaded fixing clip GEFM
GERMK-20 M20 GELMK-20 M20 9,000 4,500 3,000 1,500 125.2 Page 710
22)
LS = longer shank
Single components: clevis pin
GBM and circlip GSR
Page 711
706 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 707
igubal® igubal®
clevis igubal clevis joints | Product range
®
igubal clevis joints | Product range
® clevis
joints joints
Thread Thread
L: left-hand L: left-hand
Dimensional series E
thread thread
With spring-loaded
R: right-hand R: right-hand
thread thread
Clevis joint
Inner Ø
Inner Ø
Thread
Thread
Metric
Metric
Material: Material:
●● Lightweight
igumid G Page 1496 igumid G Page 1496
●● Absolute corrosion resistance
●● High tensile forces Lifetime calculation online Lifetime calculation online
●● Can be used in combination with series E rod ends www.igus.eu/igubal-expert www.igus.eu/igubal-expert
708 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 709
igubal® igubal®
clevis igubal clevis joints | Product range
®
igubal clevis joints | Product range
® clevis
joints joints
Material: Material:
d1
d2
d1
d3
igumid G Page 1496 igumid G Page 1496
l1
h1
I1
I2
Dimensions [mm]
Part No. d1 d2 d3 I l1 m Clip Weight
h11 [g]
GBM-04 4 3.2 7 12.5 8 1.05 GSR-04 0.3
GBM-05 5 4 8 16.5 12 1.15 GSR-06 0.5
d2
GBM-05 DIN 5 4 8 14.5 10 1.15 GSR-06 0.5
GBM-06 6 4 9 16.5 12 1.15 GSR-06 0.7
GBM-08 8 5 12 21.5 16 1.15 GSR-08 1.5
Dimensions [mm] GBM-10 10 7 15 27 20 1.35 GSR-10 3.0
Part No. d1 d2 a b C l1 h1 l2 Weight GBM-12 12 9 18 31.5 24 1.5 GSR-12 4.8
h11 ±0.5 [g] GBM-14 14 12 22 36 27 1.7 GSR-16 5.7
GEFM-04 4 8 9.5 10.5 8 19 15 4.5 0.5 GBM-15 15 12 23 36 27 1.7 GSR-16 8.3
GEFM-05 DIN 5 9 12 13.5 8 23 19 5.5 0.8 GBM-16 16 12 24 42 32 1.7 GSR-16 10.4
GEFM-05 DIN M5 LS22) 5 9 12 13.5 8 33 29 5.5 1.0 GBM-17 17 12 25 42 32 1.7 GSR-16 12.3
GEFM-05 5 10 14 15.5 8 27 23 6.5 1.1 GBM-20 20 15 30 51 40 2.0 GSR-20 19.2
GEFM-06 LS22) 6 10 14 15.5 8 39 35 6.5 1.0
GEFM-06 6 10 14 15.5 8 27 23 6.5 1.2 Circlip: GSR
GEFM-08 8 14 19 21.0 11 35.5 30 8.0 2.8
GEFM-10 10 18 23 25.5 14 45 38 10.0 5.0
GEFM-12 12 20 28 31.0 16 53 45 12.0 8.3
GEFM-16 16 26 36 40.0 22 73 62 16.0 18.3
22)
LS = longer shank Material:
POM Page 1497
d1 b
d2
Dimensions [mm]
Part No. d1 d2 b Weight
[g]
GSR-04 3.2 7 1.0 0.05
GSR-06 4 9 1.1 0.06
GSR-08 5 11 1.1 0.12
GSR-10 7 14 1.3 0.16
GSR-12 9 18.5 1.4 0.31
GSR-16 12 23 1.6 0.58
GSR-20 15 28 1.9 0.96
710 Online tools and more information online www.igus.eu/clevis 3D-CAD files, prices and delivery time online www.igus.eu/clevis 711
igubal®
clevis My sketches
joints
igubal® pillow block bearings are bearing units especially easy to install and which are able to compensate Typical sectors of industry
alignment errors and prevent edge loads. and application areas
● Plant design ● Machine building
● Packaging etc.
Maintenance-free,
dry-running When to use it?
●● If chemical resistance is required
●● If a cost-effective option is requested
High rigidity ●● If you need dirt-resistant bearings
●● To adjust misalignment
●● If you need split components
High durability
Improve technology and reduce costs –
110 exciting examples online
When not to use it? www.igus.eu/igubal-applications
●● If temperatures are higher than +80 °C
●● If an integrated fixing collar is required
●● If diameters above 50 mm are required
Maintenance and ●● If rotation speeds higher than 0.5 m/s are
lubrication-free required
Media resistant
Max. +80 °C
Min. –30 °C
6 types
Ø 5–150 mm
714 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 715
igubal® igubal®
pillow block igubal pillow block bearings | Technical data
®
igubal pillow block bearings | Product overview
® pillow block
bearings bearings
Advantages Application areas igubal® pillow block bearings – for small space
●● Maintenance-free, dry operation The ability to pivot allows igubal pillow block bearings to
®
716 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 717
igubal® igubal®
pillow block igubal pillow block bearings | Product range
®
igubal pillow block bearings | Product range
® pillow block
bearings bearings
h2
●● Compensation of misalignment and edge loads
h1
h3
●● Resistant to corrosion and chemicals
Dimensional series K
Inner Ø
C1
d2
B
Metric
Imperial dimensions available
Page 1453 x2
718 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 719
igubal® igubal®
pillow block igubal pillow block bearings | Product range
®
igubal pillow block bearings | Product range
® pillow block
bearings bearings
Pillow block bearing with split housing: Pillow block bearing: ESTM
KSTM-GT Order key Order key
Dimensional series K
h1
h1
C1C1
h
B B
m
C1
B
h1
Inner Ø
Split housing
R11 1
Metric
R R
d1
a d1
d1
C1
sw
B
Split ball
aa d3
Inner Ø
d3
d3
Metric
h2 h2
d1 Material:
h2
a Housing: igumid G Page 1496
d3 (2x) Material: Spherical ball: iglidur® W300 Page 153
Housing: RN33 Page 1498 Combination with xiros® ball bearings
h2
d2
d2
d2
Spherical ball: iglidur® J Page 141 From page 854
●● High radial loads
Lifetime calculation online ●● Media resistant ●● Maintenance and lubrication-free
h1
www.igus.eu/igubal-expert ●● Space-saving design, easy to fit ●● Dimensional series E according to DIN ISO 12240
●● Predictable service life ●● Adapter available Accessories, page 781
●● Fitting is easy and does not require shaft removal ●● Low installation space and low weight
Technical data
●● Maintenance-free, dry-running ●● High stiffness and durability
●● For high static loads ●● Predictable service life Part No. Max. stat. radial Max. stat. radial Max. axial Max. tightening Weight
●● Mounting: M12 ●● Dimensional series K according to standard tensile strength compressive strength strength torque fixing holes
Short-term [N] Long-term [N] Short-term [N] Long-term [N] Short-term [N] Long-term [N] [Nm] [g]
DIN ISO 12240
Technical data ESTM-08 2,500 1,250 4,300 2,150 600 300 1.3 5
ESTM-10 3,400 1,700 5,300 2,650 700 350 2.5 7.1
Part No. Max. radial tensile/ Max. axial tensile/ Maximum tightening Weight
ESTM-12 4,500 2,250 6,500 3,250 750 375 2.5 9
compressive strength compressive strength torque
ESTM-16 6,700 3,350 8,500 4,250 1,100 550 4.5 17.5
Short-term Long-term Short-term Long-term through ball fixing holes
ESTM-20 8,500 4,250 11,000 5,750 1,400 700 4.5 27.4
[N] [N] [N] [N] [Nm] [Nm] [g]
ESTM-25 13,500 6,750 18,500 9,250 2,300 1,150 10.5 50.8
KSTM-GT35 23)
11,000 5,500 2,500 1,250 5 15 250.3
ESTM-3025) 10,000 5,000 16,500 8,250 2,500 1,250 10.5 79.7
KSTM-GT40 11,000 5,500 2,500 1,250 5 15 235.0
KSTM-GT40-GT24) 11,000 5,500 2,500 1,250 5 15 235.0
25)
Lower values loads due to different manufacturing method
KSTM-GT4523) 15,000 7,500 3,000 1,500 5 20 405.2 Dimensions [mm]
KSTM-GT50 15,000 7,500 3,000 1,500 5 20 389.2
Part No. d1, E10 d2 d3 h h1 h2 a m C1 B R1 Max. pivot angle
KSTM-GT50-GT24) 15,000 7,500 3,000 1,500 5 20 389.2
ESTM-08 8.0 4.5 – 19 9.5 – 31.0 22.0 9.0 8.0 4.5 22°
Dimensions [mm] ESTM-10 10.0 5.5 – 22 11 – 36.0 26.0 10.0 9.0 5.0 22°
ESTM-12 12.0 5.5 – 26 13 – 38.0 28.0 10.0 10.0 5.0 22°
Part No. d1 d3 h h1 h2 SW a m C1 B Max. pivot
ESTM-16 16.0 6.6 10.6 34.0 17.0 6.4 50.0 37.0 13.0 13.0 6.5 22°
E10 angle
ESTM-20 20.0 9.0 14.0 40.0 20.0 8.6 62.0 46.0 16.0 16.0 8.0 22°
KSTM-GT35 23)
35.0 13.5 79.0 39.5 12.6 19.0 120.5 91.0 29.5 48.5 24°
ESTM-25 25.0 9.0 14.0 48.0 24.0 8.6 72.0 54.0 18.0 20.0 9.0 20°
KSTM-GT40 40.0 13.5 79.0 39.5 12.6 19.0 120.5 91.0 29.5 48.5 24°
ESTM-30 30.0 11.0 17.0 56.0 28.0 10.6 86.0 64.0 22.0 22.0 11.0 20°
KSTM-GT40-GT24) 40.0 13.5 79.0 39.5 12.6 19.0 120.5 91.0 29.5 48.5 24°
KSTM-GT4523) 45.0 13.5 100.0 50.0 12.6 19.0 149.0 114.0 35.0 60.0 24° Spherical ball materials to choose Page 763
KSTM-GT50 50.0 13.5 100.0 50.0 12.6 19.0 149.0 114.0 35.0 60.0 24°
KSTM-GT50-GT24) 50.0 13.5 100.0 50.0 12.6 19.0 149.0 114.0 35.0 60.0 24° J4VEM: JEM: REM: J4EM:
clearance free, low moisture low-cost low-cost and low
23)
Diameter given by iglidur® J bore reducer; 24) Split pillow block with split ball
preloaded absorption moisture absorption
720 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 721
igubal® igubal®
pillow block igubal pillow block bearings | Product range
®
igubal pillow block bearings | Product range
® pillow block
bearings bearings
Pillow block bearing with split housing and Pillow block bearing with parallel bore:
split ball: ESTM-GT...-GT Order key ESTM-GT Order key
Dimensional series E
Dimensional series E
Pillow block bearing
Split housing
Dimension
Split ball
Inner Ø
Inner Ø
Metric
Metric
h
m h1
m h
h1
Material: Material:
C1
B
C1
d1 Spherical ball: iglidur® J Page 141
R1
1
R
d1
a a
h2
h2
722 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 723
igubal® igubal®
pillow block igubal pillow block bearings | Product range
®
igubal pillow block bearings | Product range
® pillow block
bearings bearings
Split pillow block bearing for diameters up Pillow block bearing Slim line:
to 150 mm: ESTM-GT 150 Order key ESTM SL Order key
Dimensional series E
Dimensional series E
Pillow block bearing
Slim line
Inner Ø
Inner Ø
C1
Metric
Metric
Split
d1
h
Material: Material:
R1
iglidur® GLW Page 131 Housing: igumid G Page 1496
Spherical ball: iglidur® J Page 141
h2
●● Static loads up to 4 tons ●● Extremely space saving
d2
●● Reduce assembly time up to 50 % ●● Cost-effective
●● Resistant to corrosion and chemicals m ●● Predictable service life
a
●● Dimensional series E according to DIN ISO 12240 ●● Maintenance-free, lubrication-free
●● With M3 thread, e. g. ESTM-10-SL-M3
Lifetime calculation online ●● For self tapping screw with outer diameter 3.5 mm
www.igus.eu/igubal-expert ●● Dimensional series E according to DIN ISO 12240
Dimensions [mm]
Part No. d1 d2 h h1 h2 a m C1 R1 Max. pivot
E10 angle
ESTM-05-SL 5.0 2.5 18.0 10.0 6.5 16.0 10.0 6.0 8.0 17°
ESTM-06-SL 6.0 2.5 18.0 10.0 6.5 16.0 10.0 6.0 8.0 17°
ESTM-08-SL 8.0 2.5 19.0 10.0 6.5 18.0 12.0 6.0 9.0 17°
ESTM-10-SL 10.0 2.5 20.0 10.0 6.5 20.0 14.0 6.0 10.0 17°
724 Online tools and more information online www.igus.eu/pillow-block 3D-CAD files, prices and delivery time online www.igus.eu/pillow-block 725
igubal®
pillow block igubal® pillow block bearings | Product range
bearings
Edge length
Metric
Split
h
m
h1
Material:
Housing: igumid G Page 1496
C1
SW
a
●● High loads
●● Lightweight
●● Compensation of misalignment errors
Dimensions [mm]
igubal flange bearings
®
igubal® flange bearings have been developed for supporting the centre or ends of shafts. Like all Typical sectors of industry
standard igubal® products, these bearings consist of an igumid G housing and an iglidur® W300 and application areas
spherical ball. For temperatures up to +200 °C please select the HT-version (High Temperature). igubal® ● Plant design ● Automation ● Agricultural
flange bearings are made to the dimensional series E and are offered with two or four mounting holes. machines ● Machine building ● Food
industry etc.
Maintenance-free,
dry-running
When to use it?
●● If chemical resistance is required
●● If a cost-effective option is requested
●● If you need dirt-resistant bearings
High rigidity ●● To adjust misalignment
●● If you need split components Improve technology and reduce costs –
●● If temperatures higher than +200 °C are 110 exciting examples online
required www.igus.eu/igubal-applications
High durability
Max. + 200 °C
Min. –40 °C
(depending on material: Standard –30 °C up to
+80 °C; HT –40 °C up to +200 °C)
5 types
Ø 4–50 mm
728 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 729
igubal® igubal®
flange igubal flange bearings | Technical data
®
igubal flange bearings | Product overview
® flange
bearings bearings
730 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 731
igubal® igubal®
flange igubal flange bearings | Product range
®
igubal flange bearings | Product range
® flange
bearings bearings
dB
Type Size [mm]
●● iglidur® W300 extremely wear resistant spherical ball d1
●● Easy installation
●● Compensation of misalignment errors
●● Absolute corrosion resistance
●● Lightweight
Dimensional series E
●● Maintenance-free, dry operation
Flange bearing
m
Lifetime calculation online h
www.igus.eu/igubal-expert
Inner Ø
2 holes
Metric
Ag
A1
Material:
Housing: igumid G Page 1496
Spherical ball: iglidur® W300 Page 153
Combination with xiros® ball bearings Page 857
732 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 733
A
A1
igubal® igubal®
flange igubal flange bearings | Product range
®
igubal flange®
d1
bearings | Product range flange
bearings bearings
dB
N
Type Size [mm]
●● iglidur® W300 extremely wear resistant spherical ball
●● Easy installation
●● Compensation of misalignment errors
m
h
●● Absolute corrosion resistance
●● Lightweight
Dimensional series E
●● Maintenance-free, dry operation
Flange bearing
Lifetime calculation online
Ag
A1
www.igus.eu/igubal-expert
Inner Ø
4 holes
Metric
d1
dB
Material:
Housing: igumid G Page 1496
Spherical ball: iglidur® W300 Page 153
Combination with xiros® ball bearings Page 856
N
Technical data Dimensions [mm]
m
h
Part No. Maximum static Maximum static Maximum tigh Max. Weight Part No. d1 dB h m A1 Ag N
axial load radial load tening torque pivot angle E10 Width Hole pitch Height Total Bore d
of plate height
Short-term Long-term Short-term Long-term Holes
[N] [N] [N] [N] [Nm] [g] ±0.1
EFSM-04 200 100 1,000 500 0.6 28 ° 2.6 EFSM-04 4 14.0 25.0 17.0 4.5 8.5 3.2
EFSM-05 300 150 1,000 500 0.6 29 ° 2.7 EFSM-05 5 14.0 25.0 17.0 4.5 8.5 3.2
EFSM-06 300 150 1,000 500 0.6 25 ° 2.8 EFSM-06 6 14.0 25.0 17.0 4.5 8.5 3.2
EFSM-08 450 225 1,400 700 1.3 25 ° 5.9 EFSM-08 8 18.0 33.0 22.0 5.5 10.5 4.3
EFSM-10 700 350 2,000 1,000 2.5 25 ° 9.1 EFSM-10 10 21.9 38.0 26.0 6.5 12.0 5.3
EFSM-12 850 425 2,500 1,250 2.5 21 ° 11.0 EFSM-12 12 25.0 40.0 28.0 7.0 13.0 5.3
EFSM-15 1,100 550 3,000 1,500 4.5 20 ° 20.2 EFSM-15 15 30.0 49.0 34.0 8.5 15.5 6.4
EFSM-16 1,350 675 3,200 1,600 4.5 27 ° 23.3 EFSM-16 16 32.0 52.0 36.0 9.0 16.5 6.4
EFSM-17 1,600 800 3,400 1,700 4.5 21 ° 27.9 EFSM-17 17 35.0 54.0 38.0 10.0 18.0 6.4
EFSM-20 2,000 1,000 4,000 2,000 10.5 19 ° 45.0 EFSM-20 20 40.0 65.0 45.0 11.0 20.0 8.4
EFSM-25 2,400 1,200 5,600 2,800 10.5 15 ° 76.0 EFSM-25 25 48.5 74.0 52.0 14.0 25.0 8.4
EFSM-30 2,800 1,400 6,000 3,000 21.5 14 ° 100.7 EFSM-30 30 54.5 85.0 60.0 15.0 26.0 10.5
Standard tolerances:
Spherical ball materials to choose Page 763 from 0.5 to 6 mm: ±0.1 mm
over 6 to 30 mm: ±0.2 mm
J4VEM: JEM: REM: J4EM:
over 30 to 120 mm: ±0.3 mm
clearance free, low moisture low-cost low-cost and low
preloaded absorption moisture absorption
734 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 735
igubal® igubal®
flange igubal flange bearings | Product range
®
igubal flange bearings | Product range
® flange
bearings bearings
Complete housing with ball stud, Complete housing with ball stud,
female thread: GFSM-...-IG Order key male thread: GFSM-...-AG Order key
Type Size [mm] Version Options Type Size [mm] Version Options
Flange Mounted
ES: ball stud made from
Female thread
Flange Mounted
made from galvanised
stainless steel28) steel19)
Inner Ø
4 holes
Male thread
Metric
ES: ball stud
●● Maintenance-free and corrosion-resistant ●● Maintenance-free and corrosion-resistant
Inner Ø
4 holes
made from
Metric
●● Easy connection – easy assembly ●● Easy connection – easy assembly
stainless steel28)
●● Compensation of misalignment errors Material: ●● Compensation of misalignment errors
Housing: igumid G Page 1496
Ag
Ag Material:Ag
h
Ball stud:Aggalvanised and stainless steel28) h h
Housing: igumid G Page 1496
A1 m A1 Accessories, page 778 m A1 m A1
Ball studs: plastic, galvanised steel and stainless
l6 l6 steel28) Accessories, page 779
Tensile force Compressive force l6 l6
Tensile force Compressive force
d2
d2
d2
d2
Force test
direction Force test
direction
S1 N S1 N S1 N
736 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 737
igubal® igubal®
flange igubal flange bearings | Product range
®
igubal flange bearings | Product range
® flange
bearings bearings
Flange bearing with 4 mounting holes and High-temperature flange bearing with
split housing: KFSM GT Order key 2 mounting holes: EFOM-HT Order key
m
h
Dimensional series K
Dimensional series E
High temperature
With plug-in feet
Flange bearing
Flange bearing
Inner-Ø [mm]
Split housing
dB
d1
dk
A1
B
Inner Ø
4 holes
2 holes
Metric
Metric
d1
dn
Material: Material:
L
●● Preassembled delivery
Housing: RN33 Page 1498 Housing: iguton G Page 1496
●● Option with plug-in feet
Spherical ball: iglidur® J Page 141 Spherical ball: iglidur® X Page 245
●● Resistant to dirt m
●● Lightweight h ●● Applicable up to +200 °C
●● Low installation space ●● Easy installation
●● For high static loads ●● Compensation of misalignment errors
Ag
A1
●● High stiffness and durability ●● Absolute corrosion resistance
A2
●● Predictable service life ●● Lightweight
●● Maintenance-free dry running ●● Chemical resistant (chemical table Page 1478 )
●● Mounting: w ith plug-in feet M10, d3 ●● For underwater applications
without plug-in feet M12 Example: KFSM-GT-40-A
738 Online tools and more information online www.igus.eu/igubal-flange 3D-CAD files, prices and delivery time online www.igus.eu/igubal-flange 739
igubal®
flange igubal® flange bearings | Product range
bearings
A1
d1
Dimensional series E
dB
High temperature
Flange bearing
Inner Ø
4 holes
Metric
N
m
h
Material:
Housing: iguton G Page 1496
Spherical ball: iglidur® X Page 245
●● Applicable up to +200 °C
●● Easy installation
●● Compensation of misalignment errors
Ag
A1
Technical data
Dimensions [mm]
Lightweight
Part No. d1 dB h m A1 Ag N Max. pivot Very robust
E10 Width Hole pitch Height Total Bore diameter angle
of plate height
±0.1 d
EFSM-05-HT 5 14.0 25.0 17.0 4.5 8.5 3.2 29°
EFSM-06-HT 6 14.0 25.0 17.0 4.5 8.5 3.2 25°
EFSM-08-HT 8 18.0 33.0 22.0 5.5 10.5 4.3 25°
EFSM-10-HT 10 22.0 38.0 26.0 6.5 12.0 5.3 25°
EFSM-12-HT 12 25.0 40.0 28.0 7.0 13.0 5.3 21°
Other dimensions available upon request
The use of pivoting bearings is usually associated with high weight materials, difficult installation, and high Typical sectors of industry
costs. Most of the time, maintenance is still necessary long-term, and the bearings are only corrosion and application areas
resistant in special designs. igubal® spherical bearings put an end to all of these disadvantages: they ● Food industry ● Railway technology
are easy to fit, cost-effective, lightweight and robust. ● Automotive ● Plant design etc.
Easy to fit
When to use it?
●● For high axial and radial loads
●● When an easy installation is required
Cost-effective ●● In case of reduced installation place Improve technology and reduce costs –
●● If chemical resistance is required 110 exciting examples online
●● If a cost-effective option is requested www.igus.eu/igubal-applications
●● If you need dirt-resistant bearings
●● To adjust misalignment
Chemically resistant
High durability
www.igus.eu/food www.igus.eu/traffic
Available from stock
Detailed information about delivery time online.
Max. +80 °C
Min. –30 °C
13 types
Ø 2–40 mm
742 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 743
igubal® igubal®
spherical igubal spherical bearings | Technical data
®
igubal spherical bearings | Product overview
® spherical
bearings bearings
Simply snap For high axial and radial For tolerance Simply snap
into sheet metal loads, selectable ball compensation, selectable into sheet metal, can be
material ball material assembled on both sides
Dimensional series E Dimensional series E Dimensional series E
Page 751 Page 752 Page 753 Page 754
Solid polymer, Selectable ball stud and Removable, selectable Selectable ball stud and
selectable ball material tube materials, individual materials, individual tube materials, individual
dimensions and alignment dimensions and alignment dimensions and alignment
Dimensional series E
Page 755 Page 756 Page 757 Page 758
744 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 745
igubal® igubal®
spherical igubal spherical bearings | Product range
®
igubal spherical bearings | Product range
® spherical
bearings bearings
Dimensional series K
d2
d1
Dimensional series K
Pressfit spherical
BB
Low-cost
bearings
CC
Inner Ø
30°
Metric
f
Inner Ø
Metric
●● Compensation of misalignment and edge loads dd22 Material:
d1
d1
●● Corrosion resistance
Material: Housing: igumid G Page 1496
●● High vibration-dampening
Housing: igumid G Page 1496 Spherical ball: iglidur® W300 Page 153
●● Excellent vibration dampening
Spherical ball: iglidur® W300 Page 153 Other spherical balls upon request
●● Suitable for rotating, oscillating and axial movements
330°
f f
Page 763
0°
Imperial dimensions available
Page 1454 Technical data
Part No. Max. static compressive strength Max. tightening Weight
Lifetime calculation online (short-term) torque
www.igus.eu/igubal-expert radial axial29) through ball
[N] [N] [Nm] [g]
KGLM-05 LC 1,300 500 5 1.0
Technical data and dimensions [mm] KGLM-08 LC 2,700 1,200 12 2.9
KGLM-10 LC 4,000 1,400 20 4.3
Part No. Max. static Max. tightening d1 d2 B C f Max. Weight
KGLM-12 LC 5,400 1,500 30 6.9
compressive torque E10 pivot angle
KGLM-16 LC 8,000 3,000 40 12.7
strength through ball
KGLM-18 LC 9,000 4,000 45 16.6
radial axial29)
KGLM-20 LC 10,000 5,000 55 23.6
[N] [N] [Nm] [g]
KGLM-25 LC 13,600 7,500 65 38.9
KGLM-02 300 60 1 2 8 4 3.0 0.8 32 ° 0.1
KGLM-30 LC 20,000 9,000 70 61.0
KGLM-03 550 200 2 3 10 6 4.5 0.8 32 ° 0.5
KGLM-05 1,300 500 5 5 13 8 6.0 0.8 30 ° 1.0
29)
The maximum static axial load is determined in a remote location hole
KGLM-06 1,800 650 10 6 16 9 6.5 0.8 29 ° 1.6
KGLM-08 2,700 1,200 12 8 19 12 9.0 0.8 25 ° 2.9 Dimensions [mm]
KGLM-10 4,000 1,400 20 10 22 14 10.5 0.8 25 ° 4.4 Part No. d1 d230) B C f Max.
KGLM-12 5,400 1,500 30 12 26 16 12.0 0.8 25 ° 7.0 E10 pivot angle
KGLM-14 6,000 2,500 35 14 28 19 13.5 0.8 23 ° 9.1 KGLM-05 LC 5 13.0 8 6.0 0.8 30°
KGLM-16 8,000 3,000 40 16 32 21 15.0 0.8 23 ° 12.8 KGLM-08 LC 8 19.0 12 9.0 0.8 29°
KGLM-18 9,000 4,000 45 18 35 23 16.5 0.8 23 ° 16.6 KGLM-10 LC 10 22.0 14 10.5 0.8 25°
KGLM-20 10,000 5,000 55 20 40 25 18.0 0.8 23 ° 24.4 KGLM-12 LC 12 26.0 16 12.0 0.8 25°
KGLM-22 11,700 6,500 60 22 42 28 20.0 0.8 22 ° 28.5 KGLM-16 LC 16 32.0 21 15.0 0.8 23°
KGLM-25 13,600 7,500 65 25 47 31 22.0 0.8 22 ° 39.3 KGLM-18 LC 18 35.0 23 16.5 0.8 23 °
KGLM-30 20,000 9,000 70 30 55 37 25.0 1.0 22 ° 62.6 KGLM-20 LC 20 40.0 25 18.0 0.8 23°
29)
The maximum static axial load is determined in a remote location hole KGLM-25 LC 25 47.0 31 22.0 0.8 22°
KGLM-30 LC 30 55.0 37 25.0 1.0 22°
30)
Pressfitted
746 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 747
igubal® igubal®
spherical igubal spherical bearings | Product range
®
igubal spherical bearings | Product range
® spherical
bearings bearings
Dimensional series E
d2
d1
30°
f 30° f
Slim line
Inner Ø
Inner Ø
Metric
Metric
●● Compensation of misalignment and edge loads
●● Corrosion resistance
d1
d2
Technical data and dimensions [mm] Technical data and dimensions [mm]
Part No. Max. static tensile Max. static tensile d1 d2 B f Max. Weight Part No. Max. static Max. tightening d1 d2 B C f Max. Weight
strength (short-term) strength (long-term) E10 pivot angle compressive torque E10 pivot
radial axial radial axial strength through ball angle
[N] [N] [N] [N] [g] radial axial29)
KGLM-08 SL 2,700 450 1,350 225 8 14 9.0 0.5 5° 1.1 [N] [N] [Nm] [g]
KGLM-10 SL 4,000 750 2,000 375 10 16 10.5 0.5 5° 1.5 EGLM-04 600 50 1 4 12 5 3.0 0.5 37 ° 0.4
KGLM-12 SL 4,500 750 2,250 375 12 18 12.0 0.5 5° 2.0 EGLM-05 1,000 130 2 5 14 6 4.0 0.5 33 ° 0.8
KGLM-16 SL 6,500 500 3,250 250 16 22 15.0 0.5 5° 3.1 EGLM-06 1,200 150 2.5 6 14 6 4.0 0.5 27 ° 0.9
EGLM-08 1,800 175 7 8 16 8 5.0 0.5 24 ° 1.2
EGLM-10 2,500 400 14 10 19 9 6.0 0.5 24 ° 1.9
EGLM-12 3,800 650 25 12 22 10 7.0 0.5 21 ° 2.8
EGLM-15 5,500 1,000 30 15 26 12 9.0 0.5 21 ° 6.9
EGLM-16 6,000 1,150 32 16 28 13 9.5 0.5 21 ° 9.0
EGLM-17 6,300 1,200 35 17 30 14 10.0 1.0 21 ° 10.6
EGLM-20 9,000 1,400 40 20 35 16 12.0 1.0 18 ° 16.3
EGLM-25 14,000 2,900 55 25 42 20 16.0 1.0 16 ° 29.0
EGLM-30 17,000 4,000 70 30 47 22 18.0 1.0 13 ° 37.4
EGLM-40 22,500 2,500 80 40 62 28 22.0 1.0 15 ° 57.0
29)
The maximum static axial load is determined in a remote location hole
748 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 749
igubal® igubal®
spherical igubal spherical bearings | Product range
®
igubal self-aligning clip bearings | Product range
® spherical
bearings bearings
Dimensional series E
b2
b1
B
C
Low-cost
Inner Ø
Inner Ø
Metric
Metric
d2
d2
d3
d1
d1
Material: Material:
Housing: igumid G Page 1496 Housing: igumid G Page 1496
f Spherical ball: iglidur® W300 Page 153 Spherical ball: iglidur® J Page 141
30°
750 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 751
igubal® igubal®
spherical igubal self-aligning clip bearings | Product range
®
igubal self-aligning clip bearings | Product range
® spherical
bearings bearings
Tolerance compensation
Metal sheet thickness
Dimensional series E
Dimensional series E
b2
Heavy Duty
Inner-Ø d1
Inner-Ø d1
Metric
Metric
d3 d2 min.
d2 max.
d2
d1
d1
Material: Material:
Housing: igumid G Page 1496 d3 C Housing: igumid G Page 1496
B
Spherical ball: iglidur® W300 Page 153 B Spherical ball: iglidur® W300 Page 153
Other spherical balls upon request Other spherical balls upon request
●● Maintenance-free, dry operation
Page 763 Page 763
●● High axial and radial loads ●● Easy installation
●● Adjustment of axial and radial clearance by preloading ●● No additional axial fastening necessary ●● Max. tolerance compensation ±0.2 mm
●● Very easy installation by simply snap into sheet metal ●● For plate thickness 4.0–8.0 mm
Technical data
Part No. Max. stat. compressive force (short-term) Max. stat. compressive force (long-term) Weight
Technical data radial axial radial axial
Part No. Max. static compressive Max. static compressive Weight [N] [N] [N] [N] [g]
strength (short-term) strength (long-term) EGFM-08 T SL 31)
1,100 150 550 75 0.9
radial axial radial axial EGFM-10 T 1,900 220 950 110 2.4
[N] [N] [N] [N] [g] EGFM-12 T 2,500 270 1,250 135 3.0
ECLM-08-04-HD 1,750 125 875 60 2.0 EGFM-16 T 6,000 600 3,000 300 6.6
ECLM-10-05-HD 2,500 150 1,250 75 3.1 EGFM-20 T 9,000 800 4,500 400 11.1
ECLM-12-06-HD 3,500 175 1,750 85 3.8 EGFM-25 T 14,000 2,800 7,000 1,400 19.0
ECLM-16-08-HD 4,500 250 2,250 125 7.0 EGFM-30 T 17,000 3,000 8,500 1,500 24.0
ECLM-20-08-HD 6,000 330 3,000 165 12.0
Dimensions [mm]
Dimensions [mm]
Part No. d1 d2 d2 d3 C B b2 Housing Max.
Part No. d1 B d2 d3 y Max.
Min. Max. Min. Max. pivot angle
E10 ±0.15 ±0.1 pivot angle
EGFM-08 T SL 31)
8 (H10) 15.8 16.5 18 5.0 6 1.1 15.8 16.2 11 °
ECLM-08-04-HD 8.0 8.0 18.0 25 4.0 28°
EGFM-10 T 10 (E10) 20.8 21.6 26 6.0 9 1.0 20.8 21.2 24 °
ECLM-10-05-HD 10.0 9.0 22.0 28 5.0 24°
EGFM-12 T 12 (E10) 22.8 23.6 28 7.0 10 1.0 22.8 23.2 21 °
ECLM-12-06-HD 12.0 10.0 24.0 32 6.0 24°
EGFM-16 T 16 (E10) 29.8 30.6 35 9.5 13 1.5 29.8 30.2 21 °
ECLM-16-08-HD 16.0 13.0 30.0 38 8.0 22°
EGFM-20 T 20 (E10) 34.8 35.6 42 12.0 16 2.0 34.8 35.2 18 °
ECLM-20-08-HD 20.0 16.0 36.0 44 8.0 21°
EGFM-25 T 25 (E10) 41.8 42.6 50 16.0 20 2.0 41.8 42.2 16 °
Spherical ball materials to choose Page 763 EGFM-30 T 30 (E10) 46.8 47.6 55 18.0 22 2.0 46.8 47.2 13 °
31)
Spherical ball made from iglidur® J
REM: JEM: J4EM: J4VEM:
low-cost low moisture low-cost clearance free
absorption and low moisture preloaded
absorption spherical ball
752 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 753
igubal® igubal®
spherical igubal self-aligning clip bearings | Product range
®
igubal double joints | Product range
® spherical
bearings bearings
d1 d1
Ball stud
Dimensional series E
x
ES: ball stud made from
stainless steel28)
Clip bearings
Double joints
Ball stud M6
b2
Inner-Ø d1
b1
Pitch X
Metric
Metric
b
d2
754 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 755
igubal® igubal®
spherical igubal double joints | Product range
®
igubal double joints | Product range ® spherical
bearings bearings
Tube material
(A, B, C or D)
(A, B, C or D)
Disassembly
Double joint
Double joint
Metric
Metric
Angle
Angle
Version A Version B Version C Version D
B B d2 d2 Version A Version B Version C Version D
Options: Ball stud material Options: Ball stud material
d1
d1
d2 h2
R
Tube material SZ: galvanised steel19) Tube material SZ: galvanised steel19)
SR: galvanised steel EZ: stainless steel28) SR: galvanised steel EZ: stainless steel28)
d1
ER: stainless steel (1.4305) PZ: igumid G ER: stainless steel (1.4305) PZ: igumid G
d3 d3 Material: Material:
x
x
X
Ball stud: plastic, galvanised or stainless steel28) Ball stud: plastic, galvanised or stainless steel28)
Tube: galvanised or stainless steel Tube: galvanised or stainless steel
d1
d1
d1
R R ** Preßsitz in Aufnahmebohrung Ø--,-- H7
h1 h1 ●● Individual alignment
* nach Montage in Prüfaufnahme of the
Ø--,-- bearing
+0,005 mit Prüfstiftposition
geprüft (nur für QS) S1 h1 ●● Individual alignment of the bearing position
Prüfstift Ø--,-- fällt durch Eigengewicht / Prüfstift Ø--,-- hängt mit Eigengewicht
h2 h2 S1 S1 Prüfstift Gewicht: B ●● Easy assembly and disassembly
press fit in housing bore Ø--,-- H7 ●● High holding forces when assembled
Dimensions [mm] measured with pin gauge after assembly in housing bore Ø--,-- +0,005 (only for QA)
pin gauge Ø--,-- has to move by own weight / pin gauge Ø--,-- has to stick by own weight
pin gauge weight:
Dimensions [mm]
Part No. d1 d2 d3 X B h1 h2 S1 R Max. pivot
Part No. d1 d2 d3 X B h1 h2 S1 R Max.
Width angle Projektleiter/projectmanager: Unterschrift/signature:
Für Entscheidungen über die Eignung der von igus® zu liefernden Produkte für bestimmte Anwendungsfälle The responsibility for the decision regarding the suitability of the igus® products for
across flats
und Konstruktionen, in die die igus®-Produkte einbezogen sind, ist ausschließlich der Kunde verantwortlich.
Die ausschließliche Verantwortung des Kunden für die Konstruktion und/oder Verwendung liegt auch dann
individual application/design is taken by the customer. This also applies if igus® is
involved in the development of a customised product, e.g. with advice or proposals Width pivot
Min. beim Kunden, wenn igus in die Entw icklung eines vom Kunden geschaffenen Produktes einbezogen wird und
dabei, etwa durch Ratschläge oder Empfehlungen, mitwirkt. Alle Maße, Prüfungen und Angaben beziehen sich,
regarding the des ign and/or manufacturing process of the product and/or associated
application. All sizes, checks and data are relating to the delivery conditions at ambient
wenn nicht ausdrücklich anders angegeben, auf den Auslieferzustand bei Raumklima. climate, if not fixed deviating in particular.
across flats
Werkstoff/material: --- Oberfläche/surface: --- Min. angle
WDGM-05-A-SR-SZ 32) M5 12.8 8.0 74.0 10.8 4.6 19.2 SW8 6.4 23° mit
measures in
gekennzeichnete Maße sind Prüfmaße (keine CPK-Merkmale)
have to be contolled (no CPK-features) Zulässige Abweichung für Maße ohne Toleranzangabe Schutzvermerk
WDGM-06-A-SR-SZ-DE
Zeichnungsänderungen/drawing revision:
1:1
Maßstab/scale: permissible variation for 32)
M6
measures without tolerance limits
16.0 10.0
nach DIN ISO 16016
beachten 100.0 13.0 6.5 23.5 SW 8 5.0 23°
WDGM-06-A-SR-SZ 32) M6 14.8 10.0 80.0 12.3 6.1 23.5 SW9 7.4 25° Bauteilvolumen/volume:
Nennmaßbereich
nominal size
über/over
bis/incl.
0,5
6
6
30
30
120
120
400
400
1000
1000
2000
2000
4000 Observe protection
notices in accordance
WDGM-08-A-SR-SZ 32) M8 19.3 12.0 80.0 16.2 5.9 29.5 SW12 9.7 24°
19)
Galvanised metal
12880 mm^3
stud only available with right-hand thread
DIN ISO 2768-m
Zeichnungsnummer/drawing number:
Datum/date Name
±0,1 ±0,2 ±0,3 ±0,5 ±0,8 ±1,2 ±2 with DIN ISO 16016
WDGM-XX-X-XX-XX-DE
erstellt
WDGM-10-A-SR-SZ 32)
M1033) 19.3 12.0 80.0 16.2 7.9 36.0 SW14 9.7 24°
28)
Stainless steel ball stud uponDoppelgelenklager
26.11.2015 P. Mejia
request
drawn
geprüft
checked
32)
Please add the required centre distance in mm material made from steel, ball stud made from steel, centre distance 150 mm
33)
Housing’s size 8 with a special M10 stud, available only in metal.
Fitting:
Order example, WDGM-05-A-SR-SZ, 100: Double joint with 05 ball stud thread, version A, tube material made
from steel, ball stud made from steel, centre distance 100 mm
756 Online tools and more information online www.igus.eu/pressfit-sphericals 3D-CAD files, prices and delivery time online www.igus.eu/pressfit-sphericals 757
igubal®
spherical igubal® double joints | Product range
bearings
Tube material
Double joints
Version A Version B
Inner Ø
Metric
d1 d1
Options: Spherical ball material
Tube material Blank: iglidur® W300
SR: galvanised steel J: iglidur® J
d3 d3
ER: stainless steel (1.4305) J4: iglidur® J4
x
R: iglidur® R
EK: stainless steel (1.4305)
Material:
d2 d2 C C Housing: igumid G Page 1496
B B Ball: variable Page 763
Tube: galvanised or stainless steel
KDGM-06-A-SR-J 32) 6.0 20.0 6.0 72.0 9.0 7.0 40° Very good friction and wear properties
KDGM-08-A-SR-J 32) 8.0 24.0 8.0 84.0 12.0 9.0 35°
KDGM-10-A-SR-J 32) 10.0 30.0 10.0 96.0 14.0 10.5 35°
KDGM-12-A-SR-J 32) 12.0 34.0 12.0 108.0 16.0 12.0 35°
32)
Please add the required centre distance in mm
Order example, KDGM-06-A-SR-J, 100 : Double joint with 06 mm inner diameter, version A, tube material
made from steel, spherical ball made from iglidur® J, centre distance 100 mm
igubal® self-aligning spherical thrust bearings are very easy to fit and help to compensate for alignment Mechanical properties Coefficients of sliding friction and speed
errors and prevent edge loads. igubal self-aligning spherical thrust bearings are very easy
®
Taking into account the radial load, maximum surface
to fit and help to compensate for alignment errors and speeds up to 0.5 m/s rotating are possible.
prevent edge loads. The housing pad is made of the impact
resistant, thermoplastic composite igumid G. The spherical
Easy installation When to use it? washer is made of the iglidur® W300 plain bearing material. Fitting
●● If you want to save weight This combination provides exceptionally good friction and The housing pad is installed so that it is countersunk and
●● If corrosion resistance is requested wear properties. secured. The spherical washer is loosely fitted in the socket
Compensation of
●● If a bearing with a good coefficient of friction and is held in place by the shaft that is placed into the
misalignment errors
is required bearing.
Loads
Compensation of The load capacity of igubal® spherical thrust bearings is
edge loads very high for standard ambient temperatures. For high Product range
When not to use it? continuous loads and high temperatures, the load capacity igubal® spherical thrust bearings are available in standard
●● At very high loads of the thrust bearings should be tested in an experiment form to suit diameters from 5 to 20 mm. Please contact us
Very good friction
●● If temperatures are higher than +80 °C that simulates the application. if you require other dimensions.
and wear properties
●● If a high number of revolutions have to be
achieved
Max. +80 °C
Min. –30 °C
Type 1
Ø 5–20 mm
760 Online tools and more information online www.igus.eu/thrust-bearings 3D-CAD files, prices and delivery time online www.igus.eu/thrust-bearings 761
igubal® –
spherical
thrust igubal® spherical thrust bearings | Product range
bearings
Inner-Ø d1
Metric
Spherical washer
Type
R1-Ball
h1h1
Material:
d1 Spherical washer: iglidur® W300 Page 153
d1
d2
d2 Housing pad: igumid G Page 1496
Housing pad
h2h2
d3
d3
d2
d2
Technical data
Part No. Maximum static Maximum static Weight
axial tensile strength axial tensile strength
Short-term Long-term
[N] [N] [g]
SAM-05
SAM-06
4,000
5,000
2,000
2,500
0.9
1.1 igubal spherical balls
®
Every single iglidur® material has its own special properties, which determines the suitability for your Typical sectors of industry
special applications and requirements. Today, we offer you spherical bearings from iglidur® materials and application areas
W300 (standard), J, J4, R, RN248, UW and X. The spherical ball for metallic bearing housings are ● Plant design ● Model building
available in three materials for housing numbers 203 to 210. ● Furniture/Industrial design etc.
Tolerances
Lightweight
The tolerance of the inner diameter is E10. The
shaft tolerance should be included between h6
and h9. All values and tolerances according to
DIN ISO 2768-m.
Different materials
764 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 765
igubal® igubal®
spherical igubal spherical balls | Product overview
®
igubal spherical balls | Product range
® spherical
balls balls
Series
d1
dk
K: series K
Dimensional series
Dimensional series K Dimensional series E Dimensional series K Dimensional series E
metric/imperial metric/imperial metric metric
B
Inner-Ø d1
Page 767 Page 767 Page 768 Page 768 +90º
Metric
Width
High temperatures – Low moisture absorption –
balls
d1
igubal® spherical balls igubal® spherical balls
dk
–40º
°
30
iglidur® X Page 245 iglidur® J Page 141
Imperial dimensions available
Page 1454
766 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 767
igubal® igubal®
spherical igubal spherical balls | Product range
®
igubal spherical balls | Product range
® spherical
balls balls
d1 Series Series
d1
dk
dk
iglidur® R spherical balls
K: series K K: series K
°
30
30
E: series E E: series E
Dimensional series
Dimensional series
B B
Inner-Ø d1
Inner-Ø d1
+90º +250º
Metric
Metric
Width
Width
d1
d1
dk
dk
–50º –100º
°
°
30
30
Dimensions [mm] Dimensions [mm]
Part No. d1 dK B Weight Part No. d1 dK B Weight
E10 [g] E10 [g]
RKM-10-14 10.00 19.00 14.00 2.9 XKM-10-14 10.00 19.10 14.00 2.9
768 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 769
igubal® igubal®
spherical igubal spherical balls | Product range
®
igubal spherical balls | Product range
® spherical
balls balls
Low moisture absorption spherical balls: Low moisture absorption spherical balls:
JKM and JEM Order key JKM Order key
B
B
Type Size [mm] Options Type Size [mm]
d1
dk
30°
d1 Series
dk
K: series K
Dimensional series K
JKM spherical ball with plain bearing
Dimensional series
B B
B
+90º
Inner-Ø d1
Inner-Ø d1
Metric
Metric
Width
Width
d1
dk
d1
dk
dn
d1
dk
–50º
30°
30°
°
30
Dimensions [mm]
Part No. d1 dK B Weight
d1
d1
dk
dk
Dimensional series K
JEM-04-05 4.00 8.30 5.00 0.3
JEM-05-06 5.00 10.20 6.00 0.4
Inner-Ø d1 [mm]
JEM-06-06 6.00 10.20 6.00 0.4 +90º
JEM-08-08 8.00 13.30 8.00 0.8 Art.-Nr. Art.-N
d1 r. dn d1 dk dn B dk B
Split ball
JKM-GT-40 JKM
40
-GE10 44,5
T-40 40 E1066,344,5 49 66,3 49
Metric
Projektleiter/projectmanager: T. Preißner anager:
Projektleiter/projectm T. Preißner Unterschrift/ signature: Unterschrift/ signature:
Für Entscheidungen über dieFürEignung
Entscheidungen
der von igus®
über die
zu liefernden
Eignung derProdukte
von igus® fürzu
bestim
liefernden
mte Anw Produkte
endungsfälle
für bestimThe
mte responsibility
Anwendungsfälle for the decision
The responsibility
regarding for
the the
suitability
decisionofregarding
the igus®the product s for of the igus® product s for
suitability
und Konstruktionen, in die und
die igus®-Produkte
Konstruktionen, einbezogen sind, ist ausschließlich
in die die igus®-Produkte einbezogender sind,
Kundeistverantw
ausschließlich
ortlich. der individual
Kunde verantw ortlich.
application/design individual
is takenapplication/design
by the customer. This
is taken
alsoby
applies
the custom
if igus®
er. is
This also applies if igus® is
Die ausschließliche Verantwortung
Die ausschließliche
des KundenVerantwortung
für die Konstruktion
des Kunden
und/ oder
für die
VerwKonstruktion
endung liegtund/
auchoder
dannVerwendung liegtinauch
involved the dann
developmentinvolved
of a custom
in theised
developm
product,
ente.g.
of a
with
custom
advice
isedorproduct,
proposalse.g. with advice or proposals
beim Kunden, wenn igus in beim
die Entwicklung
Kunden, wenneines
igusvom
in Kunden
die Entwicklung
geschaffenen
eines Produktes
vom Kundeneinbezogen
geschaffenen
wirdProduktes
und einbezogenthe
regarding wird und and/ orregarding
design manufacturing
the design
process
and/of
or the
manufacturing
product and/process
or associated
of the product and/ or associated
–50º
dabei, etwa durch Ratschläge
dabei,
oderetwa
Empfehlungen,
durch Ratschläge
mitwirkt.
oder
Alle
EmMpfehlungen,
aße, Prüfungen
mitwirkt.
und Angaben
Alle Maße,beziehen
Prüfungen
sich,und Angaben beziehen
application. sich,checks
All sizes, application.
and data All
aresizes,
relating
checks
to theanddelivery
data areconditions
relating atto am
thebient
delivery conditions at ambient
Datum/date N
Dame /date
atum Zeichnungsnum
Name mer/draw
Zeichnungsnum
ing number:mer/drawing number:
erstellt
drawn 17.09.2015 erstellt P. Mejia
drawn 17.09.2015 6930927-1
P. Mejia 5091 6930927-1
7 50917
geprüft geprüft
Dimensions [mm]
JEM-20-16 20.00 29.10 16.00 6.4
Part No. d1 dK B Weight
JEM-25-20 25.00 35.60 20.00 11.5
E10 [g]
JEM-30-22 30.00 40.90 22.00 14.5
JKM-GT-40 40.00 66.30 49.00 54.5
JKM-GT-50 50.00 82.40 60.00 92.1
770 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 771
igubal® igubal®
spherical igubal spherical balls | Product range
®
igubal spherical balls | Product range
® spherical
balls balls
+100º
Series
d1
dk
°
30
–50º
°
E: series E
Dimensional series E
30
Dimensional series
B
+90º
Inner-Ø d1
Inner-Ø d1
Metric
Metric
Width
Width
d1
dk
–50º
°
30
772 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 773
igubal® igubal®
spherical igubal spherical balls | Product range
®
igubal spherical balls | Product range
® spherical
balls balls
Series
d1
dk
iglidur® J4 spherical balls
–50º K: series K
Dimensional series E
Dimensional series
B
B B
Inner-Ø d1
Inner-Ø d1
Preloaded
+90º
0.5 (6x)
0.5 (6x)
Metric
Metric
Width
Width
balls
d1
dk
–50º
d1
d1
dk
dk
°
30
Dimensions [mm]
● Can be combined with all series E housings
● Sizes from 8 to 20 mm Part No. d1 dK B Weight
E10 [g]
● Clearance free, pre-loaded
● Totally clearance-free in unloaded state RN248KM-06-09 6.00 12.80 9.0 1.0
774 Online tools and more information online www.igus.eu/spherical-balls 3D-CAD files, prices and delivery time online www.igus.eu/spherical-balls 775
igubal®
spherical igubal® spherical balls | Product range
balls
Slim spherical balls made from iglidur® materials for various metallic bearing housings
B
d1
dk
iglidur® J iglidur® A180 iglidur® A350
Dimensions [mm]
Part No. Housing no. d1 dk B Max. static compressive strength
E10 radial [kN] axial [kN]
made from iglidur J, low friction (material information From page 141)
®
igubal accessories
A180EM-17-17 UC203 17 47 17 7.5 6.0
®
A180EM-20-17 UC204 20 47 17 9.0 6.0
A180EM-25-17 UC205 25 52 17 11.5 6.0
A180EM-30-19 UC206 30 62 19 15.5 7.5
A180EM-35-20 UC207 35 72 20 19.0 8.5 Ball studs made from plastic, galvanised steel
A180EM-40-21 UC208 40 80 21 23.0 9.0
A180EM-45-22 UC209 45 85 22 27.0 10.0 and stainless steel
A180EM-50-24 UC210 50 90 24 33.0 12.0
made from iglidur A350, FDA-compliant, wear resistant (material information From page 347)
® Adapter bolt made from plastic
A350EM-17-17 UC203 17 47 17 17.0 13.0
A350EM-20-17 UC204 20 47 17 20.0 13.0 Adapter for dimensional series E
A350EM-25-17 UC205 25 52 17 25.0 13.0
A350EM-30-19 UC206 30 62 19 34.0 17.0
A350EM-35-20 UC207 35 72 20 41.5 18.5
A350EM-40-21 UC208 40 80 21 50.0 20.0
Image exemplary
S1
S2
l1
l4
Ball stud with flange Ball stud with male thread
Order key Order key
l3
d 1
SØ
d1
l2
Type Size [mm] Version Options Type Size [mm] Options
l6
S2
l1
l1
l4
d 1
SØ
d2
Thread Thread
h1
l3
Ød3
L: left-hand thread L: left-hand thread
l2
l1l6
I3
l4
S3
Material Material
l3
d2
d2
Blank: galvanised Blank: plastic
Female thread
Zulässige Abweichung für Maße ohne Toleranzangabe
S2
Schutzvermerk nach Maßstab:
l2
Freigabe Datum: Name: Unterschrift:
steel DIN 34 beachten -
über 0,5 6 30 120 315 1000 2000
MS: galvanised steel19)
l6
Für Entscheidungen über die Geeignetheit der von igus® zu liefernden Produkte für bestimmte Anwendungsfälle und Nennmaßbereich bis 6 30 120 315 1000 2000 4000
Konstruktionen, in die die igus®-Produkte einbezogen sind, ist ausschließlich der Kunde verantwortlich. Die ausschließliche Schutzvermerk
nach DIN ISO Bauteilvolumen:
Verantwortung des Kunden für die Konstruktion und/oder Verwendung liegt auch dann beim Kunden, wenn igus in die
Entwicklung eines vom Kunden geschaffenen Produktes einbezogen wird und dabei, etwa durch Ratschläge oder
Empfehlungen, mitwirkt. 16016 beachten ES: stainless Zeichnungsänderungen: DIN ISO 2768-mk `0,1 `0,2 `0,3 `0,5 `0,8 `1,2 `2
ES: stainless steel28)
Zeichnungsstand: Werkstoff:
Inner Ø
Inner Ø
Thread
Thread
Werkstoff: Stahl verzinkt
steel28) d1 Zg.Nr.: GZRM-XX
Metric
Metric
S3
SØ 26.08.13 igumid G
S1
S2
Bearbeitet 26.08.13 Metsahel
Zeichnungsänderungen: Bauteilvolumen: Ød3
Geprüft
DIN ISO 2768-m 0,1 0,2 0,3 0,5
Name
Zeichnungsstand: Zeichnungsnummer: GZRM-XX-IG Schutzvermerk nach Maßstab: Zulässige Abweichung für Maße
Spicherohne
Str. 1aToleranzangabe
51147 Köln Art.Nr.: Blatt
l1
26.08.13
l4
über 0,5 6 30 120 315 1000 2000
1
Datum
1
Name
dMetsahel
Kugelzapfen
Material:
DIN 34 beachten -
Bauteilvolumen:
Nennmaßbereich bis 6 30 www.igus.de
120 315 1000 2000 4000
SØ`0,3 `0,5 `0,8 `1,2 `2 Material:
d1 GZRM-XX A4
S3
l3
erstellt
geprüft
26.08.13
mit Innengewinde Zeichnungsänderungen: Index Änderung DINDatum Name Dateipfad:`
ISO 2768-mk 0,1 `0,2
I:\Gleitlager\Konstruktion\Serie\igubal\Winkelgelenk\Gzxm\GZRM-XX.idw
galvanised and stainless steel (1.4305) Zeichnungsstand: Werkstoff: Material: igumid G Page 1496
Spicher Str. 1a
51147 Köln Artikelnummer: Blatt
26.08.13
Zg.Nr.: GZRM-XX igumid G
1
GZRM-XX-IG Galvanised and stainless steel (1.4305)
Kugelzapfen Zulässige Abweichung für Maße ohne Toleranzangabe
www.igus.de
A4 Datum Name
l2
Plastics for longer life ®
l1
l6
●● Easy installation Schutzvermerk nach Maßstab:
l1
l4
Geprüft
über 0,5 6 30 120 315 1000 2000
Name
DIN 34 beachten - Nennmaßbereich bis 6 30 120 315 1000 2000 4000
●● DIN connection size ●● Easy installation
h1
l3
Spicher Str. 1a
Bauteilvolumen:
Zeichnungsänderungen:
51147 Köln Art.Nr.: DIN ISO 2768-mk `Blatt
0,1 `0,2 `0,3 `0,5 `0,8 `1,2 `2
1
d2
www.igus.de GZRM-XX
Zeichnungsstand: Werkstoff:
●● Corrosion-free ●● DIN
Zg.Nr.:
A4
connection
GZRM-XX size
Index Änderung Datum Name
26.08.13 igumid G
Dateipfad: I:\Gleitlager\Konstruktion\Serie\igubal\Winkelgelenk\Gzxm\GZRM-XX.idw
l2
Ød3
Kugelzapfen
●● Corrosion-free
l2
Datum Name
I3
Metsahel
l6
Bearbeitet 26.08.13
Geprüft
Name
Freigabe Datum: Name: Unterschrift:
Für Entscheidungen über die Geeignetheit der von igus® zu liefernden Produkte für bestimmte Anwendungsfälle und Spicher Str. 1a
Schutzvermerk
Konstruktionen, in die die igus®-Produkte einbezogen sind, ist ausschließlich der Kunde verantwortlich. Die ausschließliche 51147 Köln Art.Nr.: Blatt
d2 Verantwortung des Kunden für die Konstruktion und/oder Verwendung liegt auch dann beim Kunden, wenn igus in die nach DIN ISO 1
Entwicklung eines vom Kunden geschaffenen Produktes einbezogen wird und dabei, etwa durch Ratschläge oder d2 www.igus.de
16016 beachten GZRM-XX A4
Dimensions [mm] Dimensions [mm]
Werkstoff: Stahl, verzinkt – ball studs made from plastic
Empfehlungen, mitwirkt.
Index Änderung Datum Name Dateipfad: I:\Gleitlager\Konstruktion\Serie\igubal\Winkelgelenk\Gzxm\GZRM-XX.idw
16.0
Dateiname: GZRM-XX MS.idw
M10 Zeichnungsstand:
16.0 20.0 40.5GZRM-XX2.7
Zeichnungsnummer: MS 16.0 SW 13 8.0 6.0
erstellt 26.08.13 Metsahel
mit Innengewinde 26.08.13
28)
Stainless steel ball stud upon request
geprüft
Spicher Str. 1a
Datum Name Kugelzapfen
nach DIN 71 803
Dimensions [mm] – ball studs made from galvanised or stainless steel
26.08.13 Metsahel
Artikelnummer: Blatt erstellt
51147 Köln
1 geprüft
Part No. d1 d2 d3
Plastics for longer life ®
www.igus.de l1
GZRM-XX MSl2 l3 A4
l4 l6 S2 Weight
Index Änderung Datum Name Dateiname: GZRM-XX MS.idw
WGR(L)M WGR(L)M LC WGR(L)M-DE GFSM-IG ZCLM-06-10 WDGM WDGM-DE WGR(L)M WGR(L)M LC WGR(L)M-DE GFSM-IG ZCLM-06-10 WDGM WDGM-DE
778 Online tools and more information online www.igus.eu/gzrm 3D-CAD files, prices and delivery time online www.igus.eu/gzrm 779
igubal®
accessories igubal® accessories | Product range igubal® accessories | Product range igubal®
accessories
I4
Thread L
L: left-hand thread
I1
I2
h1
R: right-hand thread
Dimensional series K
Dimensional series E
Adapter bolt
d3
R1
Adapter
Inner Ø
Inner Ø
Thread
Metric
Metric
N
A
w
m
Material: N1
POM Page 1497
Fz Fd
●● Same dimensions as metallic pillow block bearings
Solid polymer bolts with a hexagonal head and circlips ●● Lightweight ●● Lightweight
are accessories to the series K rod ends. The igubal® ●● Absolute corrosion resistance ●● For pillow block bearings of series E (ESTM, ESTM-GT) Fa Fs
adapter bolts consist of extremely shock-resistant, long ●● Designed for use with K series rod ends ●● Chemical and corrosion resistant
fibre reinforced polymer POM. This component effectively ●● Vibration-dampening ●● Fits directly
transforms a standard K series rod end into a ball and ●● Easy installation ●● Space saving
socket joint. ●● Left-hand thread upon request ●● Same screws as traditional metallic versions
Technical data
Technical data and dimensions [mm] Part No. Max. radial Max. radial Lateral strength Max. axial Weight
Part No. Max. static Max. static d1 d3 l1 l4 l3 l2 W Weight tensile strength compressive [Fs] strength [Fa]
tensile strength radial load [Fz] strength [Fd] (tensile/compressive)
Short- Long Short- Long- Total Length Thread Nut Width Short-term Long-term Short-term Long-term Short-term Long-term Short-term Long-term
term term term term h11 Thread length adjusting length width across [N] [N] [N] [N] [N] [N] [N] [N] [g]
bolt flats
Right-hand Left-hand [N] [N] [N] [N] [g] AD-01-ESTM-20 26)
2,400 1,200 10,000 5,000 3,000 1,500 1,200 600 29.8
thread thread 21)
AD-01-ESTM-2527) 2,400 1,200 10,000 5,000 3,000 1,500 1,200 600 74.0
PKRM-05 PKLM-05 100 50 200 100 5 M05 25.0 8.5 11.3 2.7 8 0.7 AD-01-ESTM-3027) 2,400 1,200 10,000 5,000 3,000 1,500 1,200 600 124.0
PKRM-06 PKLM-06 150 75 250 125 6 M06 28.0 9.5 12.8 3.2 10 1.2
PKRM-08 PKLM-08 250 125 400 200 8 M08 32.0 12.5 12.5 4.0 13 2.6 Dimensions [mm]
PKRM-10 PKLM-10 500 250 600 300 10 M10 37.5 14.5 14.5 5.0 16 4.0 Part No. for ESTM-… d1 L A R1 J h1 N N1 m Mx
PKRM-12 PKLM-12 700 350 900 450 12 M12 42.0 16.5 15.5 6.0 18 7.5
PKRM-14 PKLM-14 800 400 1,100 550 14 M14 47.0 19.5 15.5 7.0 21 11.4 AD-01-ESTM-2026) ESTM-20 20 130 20 10.0 97 14.0 11 8 46 M8
PKRM-16 PKLM-16 900 450 1,400 700 16 M16 52.0 22.0 16.5 8.0 24 16.9 AD-01-ESTM-25 27)
ESTM-25 25 130 20 10.0 102 12.5 11 9 54 M8
PKRM-18 PKLM-18 800 400 1,700 850 18 M18x1.5 59.0 24.0 20.5 9.0 27 16.9 AD-01-ESTM-30 27)
ESTM-30 30 158 25 12.5 118 14.9 14 10 64 M10
PKRM-20 PKLM-20 500 250 2,200 1,100 20 M20x1.5 67.0 26.0 25.0 10.0 30 34.4 26)
Material: plastic
21)
Delivery time: 4–6 weeks 27)
Material: aluminium
780 Online tools and more information online www.igus.eu/gzrm 3D-CAD files, prices and delivery time online www.igus.eu/gzrm 781
igubal®
accessories My sketches
igubal detectable
®
igubal® bearings can be found quickly in case of misuse or crash of the system through metal detectable Available from stock
material. Even the smallest fragment can be found by metal detectors.
Detectable
When to use it?
●● When particles should be detectable
Easy assembly Space saving Clevis joints, Spring-loaded Clevis joints with Spherical balls
●● If you need maintenance-free material high strength fixing clip spring-loaded
●● When dimensional series E and K under impact fixing clip
Resistant to dust and dirt
components should be fitted loads
●● If high compressive strength is required Dimensional Dimensional Dimensional Dimensional Dimensional Dimensional
series K series E series E series E series E series K and E
Lubrication and Page 786 Page 787 Page 788 Page 790 Page 791 Page 775
maintenance-free
When not to use it? Upon request
●● If
temperatures are higher than +80 °C
●● If
diameters above 16 mm are required Rod ends Pillow block bearings
●● If
rotation speeds higher than 0.5 m/s are
required
Vibration-dampening
Available from stock
Detailed information about delivery time online.
Block pricing online For higher Space saving Clipped-in Easy to fit Extremely light,
Lightweight No minimum order value. From batch size 1. forces spherical ball compact design
Page 686 Page 690 Page 682 Page 721 Page 725
Max. +80 °C
Min. –30 °C Flange bearings
4 types
Ø 4–16 mm
Spherical bearings
Easy to fit, For extremely Space saving Simply snap For tolerance Solid
low-cost narrow into sheet metal compensation polymer
installation
space
Page 747 Page 748 Page 749 Page 751 Page 753 Page 755
784 Online tools and more information online www.igus.eu/detectable 3D-CAD files, prices and delivery time online www.igus.eu/detectable 785
igubal®
detectable igubal® detectable | Product range igubal® detectable | Product range igubal®
detectable
Rod ends with female thread, detectable: Rod ends with female thread, detectable:
KBRM-CL-DT and KBLM-CL-DT Order key EBRM-DT and EBLM-DT Order key
BB
B B Type Size [mm] Version Options d2
d2 Type Size [mm] Version Options
C1
C1
d2 d2
C1 C1
Thread Thread
d1
d1
L: left- L: left-hand
Dimensional series K
Dimensional series E
l2
l2
h2 h3
h3
thread R: right-hand
l2
l2
h1
h1
2nd generation
h2
R: right- thread
h1
h1
hand
Detectable
Detectable
l1
l1
l1
l1
thread
Inner Ø
Inner Ø
Thread
Thread
Metric
Metric
m
m
d3
d3
d4
d4
WW
d3 d3 d5
d5
W W Material: Material:
Housing: RN246 Page 1498 Housing: RN246 Page 1498
●● Smooth design no dirt traps Spherical ball: RN248KM Page 775 ●● Smooth design no dirt traps Spherical ball: RN248KM Page 775
●● Compensation of misalignment errors ●● Spherical ball is clipped in
●● Lightweight ●● Compensation of misalignment errors
●● Absolute corrosion resistance ●● Lightweight
●● Dimensional series K according to standard ●● Absolute corrosion resistance
DIN ISO 12240
786 Online tools and more information online www.igus.eu/detectable 3D-CAD files, prices and delivery time online www.igus.eu/detectable 787
igubal®
detectable igubal® detectable | Product range igubal® detectable | Product range igubal®
detectable
Thread
L: left-hand
thread
Dimensional series E
g
R: right-hand
I2
thread
h1
Clevis joint
Detectable
I1
Inner Ø
Thread
Metric
d2
●● Resistant to dust and dirt Material:
a1
d3
●● Maintenance and lubrication-free RN246 Page 1498
●● Vibration-dampening
a2
●● Lightweight
788 Online tools and more information online www.igus.eu/detectable 3D-CAD files, prices and delivery time online www.igus.eu/detectable 789
igubal®
detectable igubal® detectable | Product range igubal® detectable | Product range igubal®
detectable
Spring-loaded fixing clip, detectable: Clevis joints with spring-loaded fixing clips,
GEFM-DT Order key detectable: GERMF-DT and GELMF-DT Order key
Thread
Dimensional series E
Dimensional series E
thread
R: right-
hand
Clevis joint
Clevis joint
Detectable
Detectable
thread
Inner Ø
Inner Ø
Thread
Metric
Metric
I2 d1
Material: Material:
RN246 Page 1498 RN246 Page 1498
d2
b
a
h1
l1
Individual components: Clevis joint GERM-DT and spring-loaded fixing clip GEFM-DT
Page 788 and 790
790 Online tools and more information online www.igus.eu/detectable 3D-CAD files, prices and delivery time online www.igus.eu/detectable 791
xiros ... ®
...
...plastics
xiros® polymer ball bearings | Application examples
Other exciting applications www.igus.eu/xiros-applications
794 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 795
xiros® polymer ball bearings | Product overview
Standard: Cost-effective and FDA-compliant: With shield or labyrinth Low wear: High resistance For high temperatures For heat and chemicals:
FDA-compliant: seal: xirodur® S180, to chemicals: up to +150 °C: xirodur® A500,
PA-cage B180 cage PE cage LCC with B180-cage PA-cage xirodur® C160, PP cage xirodur® A500, PA-cage PEEK-cage
Page 806 Page 806 Page 806 Page 812 Page 814 Page 820 Page 824 Page 824
xiros® radial deep groove ball bearings – standard product range xiros® radial deep-groove ball bearings – further materials
Lightweight and non metal: ESD-complaint: ESD and High Detectable: For the tobacco industry: For temperatures
xirodur® A500, xirodur® F180, FDA-complaint: speeds: xirodur® M180, xirodur® T220, up to +120 °C:
PAI balls PA-cage xirodur® F180, PE-cage xirodur® D180, PA cage xirodur® M180 cage PP cage xirodur® G220, PP cage
Page 824 Page 828 Page 828 Page 830 Page 831 Page 832 Page 833
Single flange: With double flange: ESD protection: Pulley: Pulley with Pulley: Distinguished/ End caps:
xirodur® B180, xirodur® B180, xirodur® F180, Aluminium tube with flange FDA-conform Carbon tube with rotation lock: xirodur® B180,
PA cage PA cage PA cage bearing components flange bearing xirodur® B180 PA-cage
Page 834 Page 834 Page 834 Page 836 Page 837 From page 838 Page 840 Page 842
Spherical outer-diameter: Spherical outer diameter: Double row for Multi axis: Big roller: With flange: Polymer balls transfer Axial polymer-
xirodur® B180 and detectable: higher loads: xirodur® B180, xirodur® B180, xirodur® B180, units: ball transfer units:
xirodur® M180 xirodur® B180 PP cage PA cage stainless steel balls xirodur® B180, POM balls with spherical ball
Page 843 Page 843 Page 844 Page 845 Page 846 Page 847 Page 848 Page 849
xiros® axial bearings and slewing ring bearings xiros® combination with igubal®
Single row: Double row: Thrust washer: Slewing ring bearings: Slewing ring bearing, Pillow block, fixed or 4 holes flange bearing, 2 holes flange bearing,
xirodur® B180 xirodur® B180 xirodur® B180 xirodur® B180, with gear teeth or with cage: pivoting pivoting pivoting
glass or stainless steel balls glass or stainless steel balls glass or stainless steel balls glass or stainless steel balls stainless steel balls
Page 850 Page 850 Page 851 Page 852 Page 852 Page 854 Page 856 Page 857
xiros® polymer ball bearings | Advantages xiros® polymer ball bearings | Product overview
Lubrication and maintenance-free Overview types
Lubrication-free
polymer ball bearings
xiros® polymer ball bearings revolutionise the
ball bearing market. Where conventional metallic
xiros® radial deep-groove ball bearings – Standard product range for 6 materials:
ball bearings are suitable, many applications can
● xirodur® B180 – cost-effective standard ● xirodur® F180 – ESD-compliant
be successfully implemented by their mainte-
● xirodur® S180 – low wear ● xirodur® D180 – high speeds
nance-free dry operation and the use of xirodur®
● xirodur® C160 – chemical resistant ● Standard DIN dimensions
high-performance polymers.
● xirodur® A500 – for heat and chemicals From page 806
● Lubrication and maintenance-free
● Corrosion resistant
● Non metallic (due to the use of glass and
plastic balls), therefore non-magnetic
● For temperatures up to +150 °C (depending
on material)
● High chemical resistance, suitable for wash-
down
● Lightweight xiros® radial deep-groove ball bearings – xiros® flange bearing
● Electrically insulating (or ESD-compliant) Materials for special applications ● With flange on one or both sides
● FDA-compliant (depending on material) ● xirodur M180 – detectable
®
● Made from xirodur® B180 or F180
● Predictable service life ● xirodur® T220 – for the tobacco industry ● xiros® System Solution: Aluminium tube with 2 flange
● xirodur® G220 – for temperatures up to +120 °C bearings
Typical application areas From page 831 From page 834
● Packaging
● Textile industry
● Test engineering and quality assurance
● Optical industry
● Model making
9 xirodur® materials
Ø 3-60 mm
798 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 799
xiros® polymer ball bearings | Technical data xiros® polymer ball bearings | Technical data
Radial deep groove ball bearings design Other designs Development and tests Predictability
The xiros polymer ball bearings are single-row grooved
®
Through numerous tests the race materials were optimised. As part of the development of xiros® polymer ball bearing
ball bearings based on DIN 625. The lubrication and xiros® radial deep groove ball bearings The polymers we have developed for use with ball bearings tests are carried out continuously. The high number of test
maintenance-free ball bearings consist of four components: The other designs include: allow higher speeds, greater loads, and longer service life. results make it very difficult to present this information in
● Convex rollers which can run directly on a profile But the development continues, we believe that polymer ball tabular form. It is for this reason that igus® has developed
The outer- and inner races ● Castors bearing technology will continue to advance, especially with the online life calculator, which uses real test results to give
The suitability of a xiros® polymer ball bearings is largely ● Multi-bearings for linear and radial movements our experience and development with tribological polymer an accurate calculation.
determined by the materials of the two races. These are ● Flange bearings designed e.g. for installation in tube materials. Challenge us, talk to us about your applications,
made from igus® tribopolymers to maximise service life and ends tell us what you need from a plastic ball bearing. In the The predictability of xiros® polymer ball bearing is one of
minimise friction. Choice of 5 materials. They allow different ● Double row bearings for absorbing higher forces igus® test laboratory the life and wear of xiros® polymer the most important advantages. Based on the results of
values of application temperature, chemical resistance and ball bearings are tested. In addition to the actual material many wear tests, the user can calculate the service life of
price. The table with material data ( Page 802) gives exact Pillow block and flange bearings comparison, tests indicate these experiments also answer the xiros® polymer ball bearing reliably and interpret the
information. This range is made up by combining xiros® polymer ball questions about the impact of external influences such as application.
bearing with the igubal® pillow block and flanged housings, temperature, humidity or dust.
Outer race
resulting in a higher flexibility in terms of installation of the
bearings. The pre-finished bearing housing make it easy
Inner race for the user to use these maintenance-free components.
Both flanged and pillow block are available as fixed or as
pivoting design. The difference between the two options
Cage
is that the pivoting type can compensate for shaft and/or www.igus.eu/xiros-expert
bearing misalignment. A spherical outer race is pressed
Balls
into the bearing housing, ensuring self aligning action. If
necessary, the inner bearing can be pivoted in all directions.
Possible misalignment of two bearing points lying together
The cage can thus be compensated.
The material of the ball bearing cage must fit well to the
application. The various material options have quite different
chemical and temperature resistance values. The cage
materials are compatible with all the different race options
within xiros®.
The balls
The ball materials differ most significantly.
In addition to steel glass or plastics are used.
This produces a large difference in mass, which in turn
affects smoothness, weight and chemical resistance. Steel
balls (stainless steel) are cost-effective, chemical resistant,
but with the highest weight. Glass balls are used to give igus® extends the xiros® test stand in the industry's
a non-metallic solution. They are also very resistant to largest test laboratory for plastics in motion
chemicals and have an average weight. The igus® polymer Download the
ball bearings made from PAI have significant advantages online tools App
in weight, size and quiet running characteristics. They can
have excellent chemical resistance.
800 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 801
xiros® polymer ball bearings | Technical data
Material properties and chemical resistance
Max. long-term application temperature °C +80 +80 +60 +150 +80 +80 +80 +100 +100 +120
802 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 803
xiros® polymer ball bearings | Selection guide
According to material properties
xirodur® B180 S180 C160 A500 F180 D180 M180 T220 G220
Lowest wear
Smooth running
Chemically resistant
Seawater resistant
Dirt resistant
Higher temperatures
Higher speeds
Cost-effective
ESD-compliant
Non-metallic
Detectable
Availabilities / variants
Radial deep groove ball
bearings
Flange bearings
End cap
Spherical outer
diameter
Double row
Axial-thrust bearing
804 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 805
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Order key
Type Material
d1
xirodur® B180 cage, xirodur® B180 cage, PA cage, PA cage,
BB-623-B180-10-ES
stainless steel balls glass balls stainless steel balls glass balls Options
d2 b1
Cage material
10: PA
Cage material
Race material
Ball material
Ball bearing
Dimensions
50: PE
Ball material
ES: Stainless steel
PE cage, Special designs made from xirodur® B180 GL: Glass
stainless steel balls From page 843
Imperial dimensions available
Page 1455
806 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 807
xiros® xiros® radial deep groove ball bearings | Product range xiros®
808 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 809
xiros® xiros® radial deep groove ball bearings | Product range xiros®
810 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 811
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Order key
Type Material
d1
d2
Cage material
BB-623-B180-10-ES-C 10: PA
PA cage, with B180 cage, with labyrinth 30: xirodur® B180
b1
shield on one side, seal, stainless steel balls Options
stainless steel or glass Ball material
Cage material
Race material
Ball material
Ball bearing
Dimensions
GL: Glass
With shield
d2
Shield or labyrinth
d1
seal
C: One-sided
shield
b1
LCC: Labyrinth seal
Technical data Dimensions [mm]
Size Radial load capacity Max. Weight Inner Ø Outer Ø Width Cage/ball material combination Part No.
speed with shield with labyrinth seal
stat. dyn. ES GL ES GL Shield Labyrinth seal
[N] [N] [rpm] [g] [g] [g] [g] d1 d2 b1 PA/ES/GL B180/ES/GL
623 10 25 4,500 0.4 0.4 – – 3 10 4 ● ● BB-623-B180-10- -
626 41 43 3,200 2.5 1.8 – – 6 19 6 ● ● BB-626-B180-10- -
608 80 94 2,200 4.0 2.7 – – 8 22 7 ● ● BB-608-B180-10- -
6000 110 130 2,200 6.3 4.1 – – 10 26 8 ● ● BB-6000-B180-10- -
6001 138 147 2,000 7.1 – – – 12 28 8 ● ● BB-6001-B180-10- -
6202 142 155 1,700 12.8 8.9 – – 15 35 11 ● ● BB-6202-B180-10- -
6003 160 220 1,600 11.5 8.4 – – 17 35 10 ● ● BB-6003-B180- - -
6004 250 320 1,400 20.8 14.2 – – 20 42 12 ● ● BB-6004-B180-10- -
6005 280 360 1,200 23.9 16.7 24.7 17.5 25 47 12 ● ● BB-6005-B180-10- -
Order example: Available from stock
BB-623-B180-10-ES = Radial deep groove ball bearing with race material xirodur® B180, PA cage, stainless steel upon request
balls and shield
812 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 813
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Order key
Type Material
d1
d1
BB-608-S180-10-ES
PA cage,
d2 d2 b1 b1
stainless steel balls
Options
Cage material
Race material
Ball material
Ball bearing
Dimensions
10: PA
Ball material
ES: Stainless steel
GL: Glass
814 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 815
xiros® xiros® radial deep groove ball bearings | Product range xiros®
816 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 817
xiros® xiros® radial deep groove ball bearings | Product range xiros®
818 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 819
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Order key
Type Material
d1
d1
BB-623-C160-20-ES
PP cage, PP cage,
d2 d2 b1 b1
stainless steel balls glass balls
Cage material
Cage material
Race material
Ball material
Ball bearing
Dimensions
Options
Ball material
ES: Stainless steel
GL: Glass
820 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 821
xiros® xiros® radial deep groove ball bearings | Product range xiros®
822 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 823
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Type Material
d1
d1
BB-623-A500-10-ES
PA cage, PEEK cage, PEEK cage, PEEK cage, Options
d2 d2 b1 b1
stainless steel balls stainless steel balls glass balls PAI balls Cage material
10: PA
Cage material
Race material
Ball material
Ball bearing
Dimensions
Ball material
ES: Stainless steel
GL: Glass
PAI: Polyamide-imide
824 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 825
xiros® xiros® radial deep groove ball bearings | Product range xiros®
826 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 827
xiros® xiros® radial deep groove ball bearings | Product range xiros®
Order key
Type Material
d1
d1
BB-623-F180-10-ES
PA cage, PE cage,
d2 d2 b1 b1
stainless steel balls stainless steel balls
Options
Cage material
Race material
Ball material
Ball bearing
Dimensions
10: PA
Special designs 50: PE
made from xirodur® F180 Ball material
Page 834 ES: Stainless steel
828 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 829
xiros® xiros® radial deep groove ball bearings | Product range xiros® radial deep groove ball bearings | Product range xiros®
Races made of xirodur® D180 Rings – for high speeds Races made from xirodur® M180 – detectable
BB-623-D180-10-ES BB-6000-M180-40-ES
PA cage, xirodur® M180 cage,
stainless steel balls stainless steel balls
Cage material
Race material
Race material
Ball material
Ball material
Ball bearing
Ball bearing
Dimensions
Dimensions
Cage material Cage material
10: PA 40: xirodur® M180
Ball material Ball material
d1
d1
d1
d1
ES: Stainless steel ES: Stainless steel
Available Available
from stock from stock
830 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 831
xiros® xiros® radial deep groove ball bearings | Product range xiros® radial deep groove ball bearings | Product range xiros®
Races made from xirodur® T220 – for the tobacco industry Races made from xirodur® G220 – for temperatures up to +120°C
BB-6002-T220-20-ES BB-6000-G220-10-ES
PP cage, PA cage,
stainless steel balls stainless steel balls
Cage material
Race material
Race material
Ball material
Ball material
Ball bearing
Ball bearing
Dimensions
Dimensions
Cage material Cage material
20: PP 10: PA
Ball material Ball material
d1
d1
d1
d1
ES: Stainless steel ES: Stainless steel
d2 d2 b1 b1 d2 d2 b1 b1
Available Available
from stock from stock
832 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 833
xiros® xiros® flange ball bearings | Product range xiros®
d1
d2
d3
BB-6000 F 2830 B180-10-ES BB-608 FF B180-10-ES-CC
b1
Races made from Races made from
Cage material
Cage material
Race material
Race material
Double shield
Outer-Ø [mm]
Single flange
Ball material
Ball material
Ball bearing
Ball bearing
Dimensions
Dimensions
Flange size 30 Flange size 38
d2
d3
d1
Page 836 F: Flange on one side 10: PA
FF: Flange on both sides Ball material
Race material ES: Stainless steel
b1
xirodur® B180 races xirodur® F180 races F180: xirodur® F180 GL: Glass
PA cage, stainless steel PA cage, stainless b2 B180: xirodur® B180 Shield
or glass balls steel balls CC: Double shield
834 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 835
xiros® xiros® guide roller | Product range xiros® guide roller | Product range xiros®
xiros® system solution – aluminium tube with flange ball bearing Pre-assembled xiros® guide roller with FDA-compliant components
Cage material
Cage material
Race material
Race material
Ball bearing-
Ball bearing-
Carbon tube
Ball material
Ball material
Dimensions
Dimensions
guide roller
guide roller
Outer Ø
Outer Ø
b1 b1
d2
d1
d3
d1
d3
also available 10: PA 30: xirodur® B180
separately 30: xirodur® B180 Ball material
Page 834 Ball material ES: Stainless steel
ES: Stainless steel
Available
from stock
836 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 837
xiros® xiros® guide roller | Product range xiros® guide roller | Product range xiros®
xiros® system solution – carbon tube with flange bearing xiros® system solution – carbon tube with flange bearing
Cage material
Race material
Race material
Ball bearing-
Ball bearing-
Carbon tube
Carbon tube
Ball material
Ball material
Dimensions
Dimensions
guide roller
guide roller
Outer Ø
Outer Ø
b1 b1
A
d2
d1
d3
d1
d3
30: xirodur® B180 30: xirodur® B180
Ball material Ball material
ES: Stainless steel A ES: Stainless steel
838 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 839
xiros® xiros® profiled | Product range xiros® torque resistant | Product range xiros®
Races made from xirodur® B180 Races made from xirodur® B180
Dimensions acc.
Dimensions acc.
30: xirodur® B180 plate 30: xirodur® B180
Cage material
Cage material
Race material
Race material
to DIN 625-1
to DIN 625-1
Ball material
Ball material
Ball bearing
Ball bearing
Ball material Ball material
With shield
With shield
Profile KA
Profile P6
ES: Stainless steel ES: Stainless steel
● One-piece design ● For profiled shafts
Shielded Shielded
● Replaces several components ● With anti-rotation feature
C: One-sided cover C: One-sided cover
plate plate
Example "Profile P8" Example "Profile PP3" Example "Profile KA (Key Area)" Example "Profile DS (D-shape)"
R
b b
d1
d3
d2
d1
Ød2
b=2
H=4,5
b1 b1
b1
b1
Available Available
from stock from stock
840 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 841
xiros® xiros® end caps | Product range xiros® spherical outer diameter | Product range xiros®
Races made from xirodur® B180 Races made from xirodur® B180 or xirodur® M180
BB-6204EC44.5-B180-10-ES BB-608SO-B180-10-ES
PA cage, PA cage, xirodur® B180 races xirodur® B180 races xirodur® M180 races
stainless steel or stainless steel balls, PA cage, stainless steel PA cage, glass balls xirodur® M180 cage,
glass balls hex socket contour balls stainless steel balls
Spherical outer Ø
Ball bearing type
Dimensions acc.
Cage material
Cage material
Race material
Race material
to DIN 625-1
Ball material
Ball material
Outer-Ø (d2)
Ball bearing
End cap
● Fast and easy retrofits in many standard tubes ● Use in skewed/curved/twisted profiles
● Good axial stability ● Prevents edge stress
d2
d3
d1
d2
40: xirodur® M180
Ball material
ES: Stainless steel
b1 b1 GL: Glass
b2
Available Available
from stock from stock
842 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 843
xiros® xiros® double row ball bearing | Product range xiros® multi-axis plastic bearing | Product range xiros®
Races made from xirodur® B180 Races made from xirodur® B180
BB-6000-B180-10-ES-D BB-MB-1633-11-B180-PP
PA cage, PP balls
stainless steel or
glass balls Cage material
Housing material
Dimensions acc.
10: PA
Cage material
Race material
to DIN 625-1
Ball material
Ball material
Outer-Ø (d2)
Ball bearing
Ball bearing
Inner-Ø (d1)
Double row
Options Housing material
Multi axis
Width (b)
Ball material B180: xirodur® B180
● Higher loads ● For rotary and linear motions
ES: Stainless steel Ball material
● Less expensive than two comparable bearings
GL: Glass PP: Polypropylene
d2
d2
d1
d1
d1
d2
b1
b1 b1
Available Available
from stock from stock
844 Online tools and more information www.igus.eu/xiros 3D-CAD files, prices and delivery time online www.igus.eu/xiros 845
xiros® xiros® skate wheel | Product range xiros® flange bearings | Product range xiros®
Races made from xirodur® B180 Housing made from xirodur® B180
BB-6004SW100-B180-10-ES BB-FL-608-B180-30-ES
PA cage, PA cage, Stainless steel balls
stainless steel balls glass balls
Housing material
Dimensions acc.
Dimensions acc.
Flange bearings
Cage material
Cage material
Race material
to DIN 625-1
to DIN 625-1
Ball material
Ball material
Skate wheel
Ball bearing
Ball bearing
Outer Ø
● Larger outer diameter for smaller shafts ● For loosely toleranced holding fixtures
● Also used as roller in profiles
d3
d1
d2
dh
d1
d2
h2
b2
h1
b1