Professional Documents
Culture Documents
6
1 2 7
EN 14492-1 5
PLANETARY
4 8
EN 14492-1 EN 14492-1
MANUAL CLUTCH VERSION AIR CLUTCH VERSION
On request at the order, EPH winches can be equipped with manual EPH winches are equipped with Air clutch shifter. An air cylinder allows
clutch shifter. to pneumatically disengage the spooling drum from the gear train,
Clutch allows the operator to manually disengage the spooling drum enabling the drum to rotate freely (freespooling).
from the gear train, enabling the drum to rotate freely (freespooling). The pneumatic system works if air system is available on vehicle only.
Engaging the clutch, it locks the winch drum back onto the gear train. Manual clutch shifter is considered such an optional accessory.
Inch Inch
DIMENSIONAL DATA Dimensions :
Millimeters DIMENSIONAL DATA Dimensions :
Millimeters
20,8
530
210
109
8,3
210
325
8,3
21,4
20,8
12,8
542
530
21,4
542
325
12,8
244
16,5
9,6
16,5 4,7
18,0
457
18,0
420
9,7 457
244
4,7 120
9,6
120 420
233
9,2
0,6
15
0,2
247
247
6
9,7
233
9,2
2,2 2,2
55 55
0,6
150
15
5,9
2,2 2,2
0,2
55 55
0,9
6
2,9
73 23 E(Y)
E(Y) 5,9 1,8
5,9 1,6
10,4 10,4 150 46 E(X)
18,5 150 40 18,5
263 265 3,8
150
5,9
TECHNICAL DATA ** Max wire rope capacity corresponding to the full drum condition.
LINE PULL GEAR WORKING LINE SPEED WIRE ROPE WIRE ROPE MAX. WIRE ROPE MAX. WIRE ROPE
DESCRIPTION WEIGHT
1st LAYER RATIO PRESSURE 1st LAYER SIZE CAPACITY CAPACITY EN 14492-1 CAPACITY **
LBS KGS PSI BAR FT/MIN MT/MIN INCH MM FT MT FT MT FT MT WINCH (without wire rope) 892,87 lbs 405 kgs
44.092 20.000 99:1 2,611 180 15,7 4,8 - 20 131,2 40 196,9 60 262,5 80 ACCESSORY : ROLLER FAIRLEAD 127,87 lbs 58 kgs
- - - - - - - - - - - - - - - ACCESSORY : CABLE TENSIONER 24,25 lbs 11 kgs
Hydraulic Motor...................................................................................................................(6,1 cu in)...100 cc NOTE: Wire rope size must be respected. Recommended wire rope min.tensile strength 2160 N/mm2.
Max. oil flow............................................................................................................(21,13 GPM)...80 Lt./Min. Wire rope minimum breaking load must be at least double of winch max. pulling capacity.
Air clutch working pressure..........................................Min...(87 Psi)...6 Bar.....................Max...(145 Psi)...10 Bar Max.wire rope capacity according with EN 14492-1.
WARNING NOTE: Specifications are subject to change without notification and without incurring obligation.
Do not use winch to lift support or transport personnel. Specifications in this publication are theoretical and may vary depending on hydraulic system, environment,etc.