Professional Documents
Culture Documents
o Check the number of channels physically for 16Channels through a single connector
o Using Signal Generator Feed Analog Input Signal with a frequency of 500kS/s to each
channel and check in the Signal Meter Graphical User Interface Software the following:
o Check the Resolution: 12bits
o Set Sampling Freq: 250kS/s
o Ring Buffer Size : 4,096 samples
o Input Protection : 30 Vp-p
o Check the Sampling Modes : Polling, pacer, double-clock, or external clock
o Modes of operation Trigger Mode : Pre-trigger, post-trigger, delay-trigger, about-
trigger.
MILSTD1553:
ARINC 429
o Loop back the transmitter and receiver channels for ARINC 429 Data
o Check the Data details in GUI Software for 32 bits wide, programmable depth, separated
FIFO buffers for transmit and receive
o Verify noise filtering mechanism to enhance receiver robustness
o Using COMposer GUI Monitor the Programmable data rate on each channel (12.5/100
Kbps)
o Using COMposer GUI Monitor the Programmable label recognition with 256 Labels for
each Receiver
o Check in the COMposer GUI Monitor for the details of the Programmable parity: Even,
Odd or No-parity (32nd bit as data)
o Give the data through GUI Software and check for FIFO full/empty indication
o ARINC429 IP Core flash on the Evaluation Kit which has FPGA and check for the
Transmit and Receive functionality