Professional Documents
Culture Documents
................................................................................ 6
......................................................................................................................... 10
i
RS485 TCP/IP
RS485 Converter
External Reader
Alarm
ii
+ Red +12V
+ Red +12V
-
Black GND
- Black GND
DC 12V DC 12V
White SEN White SEN
Black
Gray
GND
BUT
NO LOCK - Black
Gray
GND
BUT
NC LOCK FR107
- Blue
Red
NO
COM +
- Blue
Red
NO
COM
FR107
Yellow NC
+
- Yellow NC
Orange AL- Orange AL-
Orange AL+ Orange AL+
+ + Red +12V
Red +12V
- Black GND
- Black GND
DC 12V
+
DC 12V
-
FR107
+ SEN
White SEN
-
White
+ Black GND
Black GND
- Gray BUT NO LOCK
-
Gray
Blue
BUT
NO
Blue NO
DC power Red COM
Red COM +
- Yellow NC
+
Yellow NC
Orange AL-
- FR107
Orange AL-
DC power Orange AL+
+ Orange AL+
-
NC LOCK
iii
SEN
GND
BUT
NO
COM
NC
AL-
AL+
iv
7. Communication
RS485+ 485-
v
vi
2. Press [8]. 3. Enter a new
1. Enter [*] and [#] (The indicator turns green
System password [#] administrator password.
and makes a beep.)
Failed.
(The indicator turns red Yes
and makes three beeps.)
1. Enter [*] and [#] 2. Press [0] or [#]. 3. Press [0] or [#].
system password [#] (The indicator turns green (The indicator turns green
and makes a long beep.) and makes a long beep.)
2. Press [1].
1. Enter [*] and [#] (The indicator turns green 3. Enter a user ID
system password [#] and makes a long beep.)
Failed.
(The indicator turns red and
makes three beeps.)
2. Press [6].
1. Enter [*] and [#] 3. Enter a user ID
system password [#] (The indicator turns green 4. Swipe the first card once only.
and makes a long beep.)
Failed. Yes
(The indicator turns red
and makes three beeps.)
1. Enter [*] and [#] 2. Press [3]. 3. Enter a user ID, press the 4. Backup fingerprint,
system password [#] (The indicator turns green fingerprint or swipe the card password or card.
and makes a long beep.) Yes
Failed.
(The indicator turns red
and makes three beeps.)
6. Exit 5. Succeeded
(Press [*] to exit.) (The indicator turns green
and makes a long beep.)
1. The device is in the 2. Press fingerprint, swipe card, Yes 3. The authentication is successful
authentication state. or enter password. Press # (The indicator turns green.)
after entering a password.
Failed.
(The indicator turns red
and makes two beeps.)
2. Press[2]. 3. Enter a user ID,
1. Enter [*] and [#] (The indicator turns green press the fingerprint,
system password [#] and makes a long beep.) or swipe the card.
Failed.
(The indicator turns red Yes
and makes three beeps.)
2. Press [9]. 3. Press [9]
1. Enter [*] and [#] (The indicator turns green (The indicator turns green
system password [#] and makes a long beep.) and makes a long beep.)
2. Press [5].
1. Enter [*] and [#] (The indicator turns green 3. Enter the authentication mode.
system password [#] and makes a long beep.)
5. The configuration is
6. Exit. successful. 4. Configure the door sensor
(The indicator turns red and (The indicator turns green and mode. (0: NONE; 1: NO; 2: NC)
makes a long beep.) makes a long beep.)
2. Press[0]. 3. Press[4].
1. Enter [*] and [#] (The indicator turns green and
system password [#] (The indicator turns green
makes a long beep.) and makes a long beep.)