Professional Documents
Culture Documents
from this box select Device Symbol, then click OK. Now, here, we can
design the symbol of our component. In our case, we are designing the LASER
block.
To design this LASER block, select Rectangle from Tool Bar and make a
rectangle. After designing the shape, go to Pins and select your desired pins. Now
define the properties of pins. Double click on pin no. 1, define the pin name Vdd
and Function as input and then click OK as shown in the following figure
Do the same procedure with other two pins. Now it's time to save your
symbol in a library, go to File > Save. Name your symbol (New-Laser in my case)
and select a library then click the Save button.
R3 L4
Vdd
LaserTH1
Lo
TH
ThermalRes1
TH
L3 R1
Vi Q2 C3
TNODE
C4
ThermalRes2
TH
TH
ThermalCapacitor1
Similarly design the electrical amplifier following the same procedure with
an internal circuit given below :
Amplifier Symbol
R2
R = 50 Ohm
E2
C = 10p F
C1
Internal Circuit