Professional Documents
Culture Documents
TECHNOLOGY
I. OBJECTIVES
At the end of the lesson, we should be able to;
1.Identify and classify tools used in repairing a computer
2.Select the best tool for each task
3.Value the importance of following proper use of tools
III. PROCEDURE
May I know who are the absent this morning? Everybody is present Ma’am!
B. REVIEW
Speaker
C. MOTIVATION
It’s riddle time!
Everybody please read our lesson objectives. At the end of the lesson, we should be able to;
1.Identify and classify tools used in repairing a
computer
2.Select the best tool for each task
3.Value the importance of following proper use of
tools
E. PRE-ACTIVITY
(PowerPoint Presentation)
WHY?
Very good!
(albert)
A hand tool is any tool that is powered by
What are the basic hand tools? hand rather than a motor.
Examples:
Screw driver, pliers, paint brush
Ma’am
(derder)
Anyone of you have an idea what are the types of are hand tools specifically designed to insert and
screwdriver ? tighten, or to loosen and remove screws.
Yes! Carlos?
Very good!
Yes. Emperwa?
Ma’am
Very good! (carlos)
Yes. Espinosa? a. Slotted Screwdriver- is used to drive of fasten
Very good! negative slotted screws.
Ma’am
(emperwa)
b. Phillips Screwdrivers- used to drive or fasten
What are the three Soldering Tools? positive slotted screws.
Flores? Ma’am
(espinosa)
c. Jewelers Screwdriver Set- is a set of small
screwdrivers composed of slotted and Phillips
screwdrivers
(Flores)
1.Soldering Iron- is a device for applying heat to
melt solder in attaching two metal parts.
Excellent!
What are the tools use in splicing? 3. Desoldering Tool- is used in removing soldered
wires and components on printed circuit boards for
Gabutero? troubleshooting and repair purposes.
(Gabutero)
Long Nose- is used for holding, bending, and
stretching the lead of electronic component or
connecting wires.
Side Cutter- is a wire- cutting pliers, though they
are not used to grab or turn anything, but are used to
cut wires.
Very good!
(salave)
12V Mini- Drill- is used to bore drill holes in
printed circuit board (PCB) with sizes from 1/32-
1/16.
Portable Electric Drill- is used for boring hole in
plastic or metal chassis with used of drill bits
having sizes from 1/6 to approximately ¼.
Three types of Metal File
Flat File- is parallel in width and tapered in Metal Files- hand tools having a series sharp ,
thickness; they are used for flat surfaces and edges parallel ridges or teeth.
Thank you!
Now I’ll be the one to read the auxiliary tool and 2. Hacksaw- is used for cutting metals.
explain it.
G. ABSTRACTION
Very good.
I. ASSESSMENT
1.L
2.I
3.H
4.F
5.D
6.A
7.C
8.E
9.K
10.B
J. ASSIGNMENT
Research about hand tools based on their function and operation. Write it on the 1 whole
sheet of pad paper.