You are on page 1of 2

PC-LINK 5SP PC-LINK 5SP

SELF-POWERED LOCAL DOWNLOAD KIT SELF-POWERED LOCAL DOWNLOAD KIT


Installation Instructions Installation Instructions

The PC-Link 5SP adaptor allows for on-site downloading of the NT9005 quickly and The PC-Link 5SP adaptor allows for on-site downloading of the NT9005 quickly and
easily. The PC-Link 5SP package includes the PC-Link adaptor, PC-Link 5SP adaptor, a easily. The PC-Link 5SP package includes the PC-Link adaptor, PC-Link 5SP adaptor, a
connecting cable, a DB-9/DB-25 serial connector and a transformer. connecting cable, a DB-9/DB-25 serial connector and a transformer.
PC-Link 5SP Adaptor Connecting Cable DB-9 / DB-25 Serial Connector Transformer PC-Link 5SP Adaptor Connecting Cable DB-9 / DB-25 Serial Connector Transformer

Connecting the PC-Link 5SP Connecting the PC-Link 5SP


Press the PC-Link adaptor onto the PC-Link pins, through the plastic key in the Press the PC-Link adaptor onto the PC-Link pins, through the plastic key in the
NT9005 plastic. NT9005 plastic.
NOTE: The plastic key is located on the back of the NT9005. It may be hidden NOTE: The plastic key is located on the back of the NT9005. It may be hidden
under the pull-out drawer. under the pull-out drawer.

PC-Link PC-Link
Adaptor Transformer Connection Adaptor Transformer Connection

Base Plastic key Base Plastic key

NOTE: The PC-Link 5SP is only compatible with products that have a 5-pin NOTE: The PC-Link 5SP is only compatible with products that have a 5-pin
PC-Link header. PC-Link header.
Attach the connecting cable to the PC-Link adaptor and to the DB-9/DB-25 connector. Attach the connecting cable to the PC-Link adaptor and to the DB-9/DB-25 connector.
Attach the DB-9 / DB-25 connector to a serial port on the computer to be used for Attach the DB-9 / DB-25 connector to a serial port on the computer to be used for
downloading. Connect the transformer to the PC-Link adaptor and plug the transformer downloading. Connect the transformer to the PC-Link adaptor and plug the transformer
into an AC outlet. into an AC outlet.
To Initiate the Link: To Initiate the Link:
• Verify that the version of DLS software being used supports the NT9005 • Verify that the version of DLS software being used supports the NT9005
• Have the computer waiting for a connection from the NT9005 • Have the computer waiting for a connection from the NT9005
• Plug the powered PC-Link connector into the connector on the back of the • Plug the powered PC-Link connector into the connector on the back of the
NT9005; the panel and computer will then connect automatically without any NT9005; the panel and computer will then connect automatically without any
commands being entered on the NT9005 commands being entered on the NT9005

Disconnecting Disconnecting
To disconnect, simply terminate the session from the downloading computer and To disconnect, simply terminate the session from the downloading computer and
remove the PC-Link adaptor from the control panel. remove the PC-Link adaptor from the control panel.

©2001 Digital Security Controls Ltd. Toronto, Canada ©2003 Digital Security Controls Ltd.
www.dsc.com Toronto, Canada • www.dsc.com
Printed in Canada 29005910 R001 Printed in Canada 29005910 Rev 002
LOCAL DOWNL
DOWNLO
PC-LINK
OAD KIT-DB09
KIT-DB09 LOCAL DOWNL
PC-LINK
OAD KIT
DOWNLO -DB09
KIT-DB09
INSTALLA
INSTALLA TION INSTRUCTIONS
ALLATION INSTALLA
INSTALLA TION INSTRUCTIONS
ALLATION

The PC-Link adaptor allows the installer to perform on-site downloading of The PC-Link adaptor allows the installer to perform on-site downloading of
supported panels quickly and easily. The PC-Link package includes the PC-Link supported panels quickly and easily. The PC-Link package includes the PC-Link
adaptor, a connecting cable and a DB-9 serial connector. adaptor, a connecting cable and a DB-9 serial connector.

PC-Link Adaptor Connecting Cable DB-9 Serial Connector PC-Link Adaptor Connecting Cable DB-9 Serial Connector

Female Female

Connecting the PC-Link Connecting the PC-Link


Locate the PC-Link pins on the control panel. Press the PC-Link adaptor onto the Locate the PC-Link pins on the control panel. Press the PC-Link adaptor onto the
PC-Link pins. Be sure to align the base of the adaptor to the white line underneath PC-Link pins. Be sure to align the base of the adaptor to the white line underneath
the pins, as indicated in Figure A. When using a Palm Pilot, the connection must be the pins, as indicated in the following diagram:
inverted as shown in Figure B.
Base
Base
PC-Link PC-Link
Figure A Figure B
Adaptor Adaptor
PC-Link PC-Link
Adaptor Adaptor
Base
Base Control Panel Control Panel
Control Panel Control Panel
Attach the connecting cable to the PC-Link adaptor and to the DB-9 connector. Attach
Attach the connecting cable to the PC-Link adaptor and to the DB-9 connector. Attach
the DB-9 connector to a serial port on the computer to be used for downloading.
the DB-9 connector to a serial port on the computer to be used for downloading.
Initiating Downloading
Initiating Downloading
To initiate the download, first ensure that the computer and panel are connected in
To initiate the download, first ensure that the computer and panel are connected in
the manner described above. Verify that the version of DLS software being used
the manner described above. Verify that the version of DLS software being used
supports the panel that has been connected.
supports the panel that has been connected.
To initiate the link, follow the instructions located in the panel’s Installation Manual
To initiate the link, follow the instructions located in the panel’s Installation Manual
under ‘PC-Link’ or ‘Downloading’.
under ‘PC-Link’ or ‘Downloading’.
Disconnecting
Disconnecting
To disconnect, simply terminate the session from the downloading computer or
To disconnect, simply terminate the session from the downloading computer or
press [#] before the connection has been made. Remove the PC-Link adaptor from
press [#] before the connection has been made. Remove the PC-Link adaptor from
the control panel.
the control panel.
©2003 Digital Security Controls Ltd. ©2003 Digital Security Controls Ltd.
Toronto, Canada • www.dsc.com Toronto, Canada • www.dsc.com
Printed in Canada 29005910 Rev 002 Printed in Canada 29005910 Rev 002

You might also like