The steel design report summarizes the results of an analysis of a steel structure project. Various steel sections were analyzed under different load combinations, with the most critical sections and load combinations identified. The W10x49 and W12x53 sections had the lowest stress ratios of 0.12 and 0.116 respectively under dead loads only. The W8x28 section had the highest deflection ratio of 0.944 under dead and wind loads.
The steel design report summarizes the results of an analysis of a steel structure project. Various steel sections were analyzed under different load combinations, with the most critical sections and load combinations identified. The W10x49 and W12x53 sections had the lowest stress ratios of 0.12 and 0.116 respectively under dead loads only. The W8x28 section had the highest deflection ratio of 0.944 under dead and wind loads.
The steel design report summarizes the results of an analysis of a steel structure project. Various steel sections were analyzed under different load combinations, with the most critical sections and load combinations identified. The W10x49 and W12x53 sections had the lowest stress ratios of 0.12 and 0.116 respectively under dead loads only. The W8x28 section had the highest deflection ratio of 0.944 under dead and wind loads.