Professional Documents
Culture Documents
1
Utilize Wireless Network as data transfer media, makes future factory
development more flexible, when factory install new embroidery machines, just a
few steps software setup can easily add those new machines into Wireless
2
1.3 Specification
Item Description Technical Standard
3
2.1 Network Topology Diagram
Picture 2.1 is the Network Topology Diagram of Wireless LAN System
(WLAN), embroidery files are transferred through the network to all embroidery
machines for production.
4
Picture 2.1
Wireless router with strong signal transfer ability should be choose,
commercial grade router, suggest to use TP Link model TL-WVR308(picture 2.2)
or better.
Pi
cture 2.2
2.2 Router
Setup
5
sensitive text strings)
Security Mode WPA-PSK
6
DHCP Server On
DHCP Pool Starting Address 192.168.1.2
7
Following we use TL-WR840N Wireless Router as example, elaborate
how to setup a wireless router, other brand or model routers may have some
different during setup, users need to study user manual shipped with each
router.
A) Connect electricity supply to router, push and hold “RESET” key for 5
seconds till indication lamps all on and reset complete. By this time, the
router has been reset back to factory default settings.
8
B) Set computer wireless network interface automatic get IP address from
DHCP server (see picture 2.3). Search and Connect to the Wireless
Router.
9
Picture 2.3
C) Open “Internet Explorer” in Window OS, input network address
192.168.1.1 and “Enter”
D) Input user name and password in login window; default corresponding
user name and password is “admin” and “admin”
Picture 2.4
E) Clic
k
“Ne
two
rk”
->
10
LAN setting, input at the right side IP address of router as 192.168.1.1
and subnet mask 255.255.255.0, then click “Save” to keep the setting.
See picture 2.5
Picture 2.5
11
F) Click “WLAN” -> “Basic Setting”, input at right side SSID setting as
“RichPeace” (case sensitive), click “Save” to keep the setting, see
picture 2.6
Picture 2.6
G) Click “WLAN” -> “Wireless Security Setting”, Select at the right side
12
security mode “WPA-PSK/WPA2-PSK” at pull down menu, select
encryption mode “AES”, input PSK share key as “RichPeace” (case
sensitive), click “Save” to keep the setting, see picture 2.7
Picture 2.7
H) Click “DHCP Server” -> “DHCP Service”, select at right side “DHCP
Server” to “On”, input ip pool address start from 192.168.1.2, end at
13
192.168.1.99. Click “Save” to keep the setting, see picture 2.8
Picture 2.8
I) Click “System Tool” -> “Restart Router”, click “Restart Router” at right
side, click “Yes” to confirm restart. See picture 2.9.
14
Picture 2.9
15
2.3 WIFI 模块的设置 WIFI Module Setup
Remarks:
1. WIFI module’s default factory setting is set to connect to router with
setting mention in Section 2.2, if you have following the setting to
setup your router, you can skip this WIFI Module Setup section,
otherwise, you should follow the setting underneath to setup WIFI
Module of each embroidery machine.
2. You should not input any other setting other than those was
introduced in following sections. Reset to factory default setting is also
prohibited.
A) A label printed with WIFI Module Setting data is stick on the back of
Main Control Box.
SSID :_RP-×××××××
Password :_RP-×××××××
Router IP : 10.10.100.254
User name : Admin
16
Key : Admin
Picture 2.10
17
B) Set the IP address of network interface to 10.10.100.1, subnet mask:
255.0.0.0, default gateway: 10.10.100.254 (see picture 2.11)
Picture2.11
C) Refresh Network Interface available WIFI network list, search and
connect to WIFI Module in Main Control Box (see picture 2.12)
18
Picture 2.11
Picture 2.12
F) Sel
ect
“W
irel
ess
Picture 2.13
G) Select service router with SSID “RichPeace”, then click “Apply” button
to confirm making change.
20
Picture 2.14 Picture 2.14
Picture 2.15
21
J) If you want to change the user name and password setup, can be done
at this “Module Manage” interface window.
22
The following list is WIFI Module Factory Default Settings.
Page Parameter Default Value
Working Mode Station Mode
Mode Transparent
Data Transfer Mode
transmission mode
Network Standard 11b/g/n mixed mode
Service Set
RP-*********
Identifier(SSID)
Module MAC address By random
Radio Channel Automatic
Wireless AP Security Mode WPA-PSK
Settings Encryption Method AES
Password RP-*********
IP Address (DHCP Server
10.10.100.254
Appoint)
Subnet Mask 255.255.255.0
DHCP Type Stop
Wireless Terminal Connect Network Name RichPeace
23
MAC Address
Settings
Security Mode WPAPSK
Encryption Method AES
Password Richpeace
Baud Rate 57600
Data Bit 8
Network and
Parity Check None
Other Settings
Stop Bit
Hardware Flow Control Disable
Module User Name admin
Management Password admin
24
2.4 Control Box Settings
25
Picture 2.16
26
2.5 Server Setup
A) Connect the Wireless Network Interface with Wireless Router setup in
section 2.2
B) Open “Control Panel” of Window System. Select “Internet”, then right
click “Wireless Network” -> select “Property”-> double click “ Internet
Protocol” and internet protocol setting window pop up. Base on
following table to input settings. Click “Yes” to save and confirm.
27
IP Address 192.168.1.254
Subnet Mask 255.255.255.0
Default Gateway 192.168.1.1
DNS Server “Leave blank”
Picture
2.17
28
3.1 Login to Management System
Double click open Wireless
Embroidery Management System
at computer server.
Input User information at Main Login Window.
29
Picture 3.1
Input initial user name : Admin, and password: Admin, click “Login” button
to enter program main control window. (see picture 3.2)
Picture 3.2
30
3.2 Interface Description
Function of main interface icons as following
Refresh Machines List
Pattern Transfer Control
Add Machine
Delete Machine
Edit Machine Data
User and Authority Management
Manage Daily Log
System Screen Lock
Exit Program
31
3.3 How to Use
Picture 3.3
Picture 3.3
32
Interface Description
Item Function Default Value
Machine Name Name of machine will be added Machine_
sequence number
Machine Number Number of machine will be Sequence number
added following
Machine IP Address Embroidery Machine IP 192.168.1.100
address
Machine IP[Default] Reset Embroidery Machine IP
Button address to default value:
192.168.1.100
Server IP Address IP Address of Computer 192.168.1.254
installed with Management
System (Server)
Server IP [Default] Reset Server IP address to
Button default value:192.168.1.254
Operator Name Operator will be added Operator_
sequence number
33
Operator Number ID Number of Operator will be Sequence number
added following
[SAVE] Button Save current settings, confirm
to add one machine
34
3.3.2 Delete Machine
Select the Machine going to be deleted at main control window, right click
and a menu list pop up, click “Delete Machine” and the selected machine is then
deleted from the machines list immediately.
35
3.3.3 Setup Machine Parameter
Select the Machine going to be deleted at main control window, right click
and a menu list pop up, click “Machine Setup”, the machine’s setup window will
then opened. (see picture 3.3)
Edit the machine settings as previous operation at “Add Machine” section,
please reference to section 3.3.1 “Add Machine”
36
Picture 3.4
[Add], [Edit], [Delete] commands are used to setup operators and
administrators. User “Admin” is default system administrator, see picture
3.4.
Picture
3.5
B) Edi
t
37
User Password: at “User Authority Management” interface, select user in
the list, click [Edit] button, “Edit User” window pop up, see picture 3.6.
Input current password and new password, then click “OK” button to
save new password or click “Cancel” button to cancel editing.
Picture
3.6
C) De
let
e
39
●:Allowed ○:Dis-allowed
40
3.3.5 Manage Daily Log
41
42
3.4 Pattern Transfer Operation
Double click any machine in the list which the pattern will be transferred to
at main control window. Machine Pattern Transfer Management Window will
pop up, see picture 3.8
43
Picture 3.8 Picture 3.8
A) [Add] button – add one or more patterns in “Wait for Transfer Zone”
B) [Delete] button – delete patterns being stored in “Wait for Transfer Zone”
C) [Clear All] button – clear all patterns being stored in “Wait for Transfer
Zone”
D) [Send] button – send the patterns to machine for production
44
3.4.4 日志浏览 View Daily Log
A) [Update Machine Daily Log] button – send lastest 100 operation logs back
to management software.
B) [View System Log] button – view system’s daily operation logs.
C) [Exit] button – return to main control window
A) [Update List] button – list all patterns files being stored in the selected
machine
B) [Delete Selected Pattern] button – deleted the selected pattern file from the
machine.
45